STO been included (considered) into Sales forecasting

Dear friends
Does anyone knows if is possible to make Stock Transport Order been considered at Sales Forecasting ?
We need not only Sales Order been there , but include quantities from STO too.
Best regards,
Ale

Dear,
Forecasting is calculated from past history.
Hence consumption to sales order is considered for forecast. If you want the STO data also to be considered for Sales forecast if you enable the movement type used for STO delivery. If you are looking for that please come back

Similar Messages

  • STO been considered at Sales Forecasting

    Dear friends
    Does anyone knows if is possible to make Stock Transport Order been considered at Sales Forecasting ?
    We need not only Sales Order been there , but include quantities from STO too.
    Best regards,
    Ale

    Dear,
    Forecasting is calculated from past history.
    Hence consumption to sales order is considered for forecast. If you want the STO data also to be considered for Sales forecast if you enable the movement type used for STO delivery. If you are looking for that please come back

  • Integrating Sales Forecast into Demand Planner

    Can somebody tell me is there any way to integrate Sales Forecast into Demand Planner of APS ?

    Hi Ananth,
    Check Business content Query -
    http://help.sap.com/saphelp_nw04s/helpdata/en/43/25b2946b3e0d24e10000000a1553f7/frameset.htm
    and other available query, if you find some thing relevant, activate the relevant objects and start extracting data.
    hope it helps
    Regards
    Vikash<a href="http://http://help.sap.com/saphelp_nw04s/helpdata/en/43/25b2946b3e0d24e10000000a1553f7/frameset.htm">http://http://help.sap.com/saphelp_nw04s/helpdata/en/43/25b2946b3e0d24e10000000a1553f7/frameset.htm</a>

  • Sales Forecast

    How to handle sales forecast in OM?
    For comparative analysis, user wants to input sales forecast per item in terms of quantity and sales amount for them to be able to generate and view report regarding the following:
    1) Comparative Report Forecast vs Actual Sales Ordered per item and amount.
    2) Comparative Report Forecast vs Actual Ordered per quantity per item per customer.
    3) Forecast vs Actual Sales
    Thanks!

    Possibilities:
    1. If you have sales planing in R/3, and extract that data into BW, you can have a forecast report.
    2. If you have APO and have demand planing, then you can have forecast report.
    3. If you use BPS / IP for sales planing / forecasting, then you can have.
    Ravi Thothadri

  • How to include components into mxml file?

    I have an mxml file with multiple states and it is getting
    quite large. I would like to divide these states into their own
    components. How can i include these into the mxml file?
    Thanks!

    I couldn't be happier that you asked this question and if you
    don't mind I'd like to extend on it a touch since it directly
    relates to my topic.
    I am right with Dr. Goomba (Great name) when it comes to
    filesize of a single application.
    The flash player has always been a big proponent of small
    file size and fast dowloads to ensure our users have a pleasant
    experience in our applications. I have been going through the
    documentation tirelessly and the only mention I really see as a
    supporter of that theory is "RSL" documentation which, believe it
    or not, actually advises against them unless you are using them
    across multiple apps.
    So, my question is a tack on to Dr. Goomba (Answer his first,
    this is just a supporter):
    Has Flex 2 moved us away from fast delivery? I have an
    application already up to 300k that could easily reach the 700k
    range (I think, based on my total progress so far) - It doesn't
    seem to me that the focus is still on loading things in parts like
    the MX 2004 RIA days.

  • Sales forecasting-updating opportunities with booked values

    Hi,
    we have a need where a user creates an opportunity for a large deal (say worth 6M USD) which will be realized over say 6 months. each month from the day the oppty is created say 1 MUSD worth orders will be created.
    how do we incorporate this scenario in the monthly sales forecast. challenge here is that one opportunity will result into multiple orders each month. how will the sales forecast know that against the large deal of 6 MUSD, some amount is already realized/booked and it should subtract that amount from forecast report. need is to avoid double forecasting in such scenarios.
    is there a standard report which takes care of such scenarios?
    i am sure this is not a unique situation in almost all B2b sales this should be a need.
    any pointers will be appreciated
    thank you.

    I referenced the post below.
    http://social.msdn.microsoft.com/Forums/en-US/6f68404d-82f3-4df0-b5b9-00e353cbcf68/conditional-split-expression-evaluates-to-null?forum=sqlintegrationservices
    it is not working for me.  I don't understand the approach of using derived column to get rid of NULLs neither.  Can you help?
    Thank You Warmest Fanny Pied

  • Scope of ATP check (sales forecast)

    Hi gurus,
    I want to know whether the info from sales forecast can be take into account by using standard ATP check function?
    thanks.

    hi,
    Task
       Transaction
    MC21- Created infostructure S501
    MC25- Maintain update rule 0001 for S501
    OMO1 - Activate update for S501
    OVRP - Assign update group at item level for 1290
    OVRO - Assign update group at header level for 1290
    MC7F- Set planning parameters for info structure S501
    MC8A - Create planning type for S501
    OV1Z - Create product allocation procedure PLANT_MATERIAL
    SPRO - Define object PROD_ALL for poduct allocation. - Config path: Spro>S&D>Basic functions>Avalability check and transfer of req>availbility check> Availablity check against product allocation>Define object
    OV3Z - Specify Hierarchy for product allocation for PLANT_MATERIAL
    SPRO -Define consumption periods for info structure S501-Config path: Spro>S&D>Basic functions>Avalability check and transfer of req>availbility check> Availablity check against product allocation>Define consumption periods.
    OV4Z - Define control for product allocation procedure PLANT_MATERIAL
    MC61 -Create planning hierarchy for plant and material
    SPRO-Assigned update group 1 to order type
    BF11 -Active CRM APO field
    steps 1 : create a sales info system : this sis will have the following fields 1. incoming order qty. 2. Product allocation qty. 3. open order qty.
    step 2 : the user will have excel sheet which will have authentications , where the user will enter the qty.
    step 3: a program is written to convert the excel quantities to text file ie txt file,
    step 4 : upload the text file quantity to the sales information system. you have to make a transaction code to upload. in MC95 transaction code.
    step5. before doing this we need to have material  hierarchy, and pplanning type should be maintained for every material in basic data 1 product allocation field.
    please try to understand and then let me know
    thanks
    Kuntla

  • Collaborative sales forecasting

    Hi Experts,
    Was trying to test collaborative sales forecasting , have done all the basic setting and have been able to release forecast to collaborative forecasting
    but I have to test it and i dont want to run SPROXY to update customer baseline sales forecast
    I want to update the same up using transaction /SCA/TSDMTEST
    the time series type I am using is DFC01
    but i have tried all the key figures and try setting them too
    but key figure customer baseline sales forecast doesnt get updated with the values saved using TSDM
    Please suggest me a way where i can update customer baseline sales forecast with out using XML messages of type ProductForecastNotification (PFN) or ProductForecastRevisionNotification (PFRN).
    Regards
    Manas Malhotra

    Hi Manas M
    You can manually do it in customer view
    Create a internet user, assign him to Customer BP organisation and assign BP Org to location master of customer
    Now access the below transaciton
    /SCA/ICH_C - SNC - Customer View
    Go to Sales Forecast Details - Product View (Customer)
    There you can enter manually
    Please remember, this is only for testing, You have to put to use, you need to edit the roles, and give only what screens a customer would like to use and to what extent
    For now user roles mentioned in help link for customers
    http://help.sap.com/saphelp_scm70/helpdata/en/b4/91f9507f7bd942b634304e9ddd3c90/frameset.htm
    SAP_SCM_ICH_FCS_CUS
    Best Regards
    Vinod

  • 7.1 Error: transaction type SMIN has already been included in the categoriz

    Hello Experts,
    I'm getting the following error while running a program AI_CRM_CREATE_CAT_SCHEMA:
    Error: transaction type SMIN has already been included in the categorization schema - SAP_SOLUTION_MANAGER_TEMPLATE.
    Please remove SMIN from application area of SAP_SOLUTION_MANAGER_TEMPLATE and then run this report again.
    Can you please advice how to resolve this?
    Thank you,
    123

    I invite the colleagues that if they do not have a solid answer to a question, please do not bother on answering it.   Even the guide does not say how to get rid of that error.  The guide on page 17 says "Please ensure that there is no active categorization schema for the transaction types listed above before you run the report".   Well, how do you do that?   Also the guide says to create a version of the schema, and release that new schema, but that still does not work.  You go into the new schema version to delete all entries related to SMIN, but even after that you still get the same error trying to run the report AI_CRM_CREATE_CAT_SCHEMA.
    I am writting all this because from the answers above:
    Answer 1, the SAP Note:  They do not mention anything about schema.
    Aswer 2 and 3.                 Already answered.  The implementation guide does not help as mentioned above.
    Answer 4.                        This error has nothing to do with copying SMIN into ZMIN.
    Please accept my complaint and do not get offended.  We all know we are trying to help one another, although it is nicer to save time getting to the correct answer faster.
    Thanks,
    Juan

  • Monthly sales forecast file upload new combinations not getting loaded.

    For one of our planning areas, I get sales forecast as spread sheet and upload this to the infocube.
    We run CIF daily and monthly also to include all new material.
    When I upload the file when I checked the log everything went fine with 3 warnings for 3 products with message "contents of the infocube not contained in BasicPlobStruc.
    Now these material are already in APO by Sold to party is new and there is no combination to this Sold to party and hence the the data did not get loaded.
    Now my Client wants to change whatever required so that all new combinations data are included in when month end sales forecast is loaded.
    Can you advice what needs to be done as ther are large number of products I wont which are new combinations and as far as my knowledge is concerned , since there is no history CVC's are not automatically created.
    Can anyone advice.

    Hi Siva,
                   To b frank I did not completely understand what you are talking about as you are all over.
    As I understand you are getting excel file for sales forecast and you upload the flat file to cube and generate CVCs based on this cube. You are not able to generate the CVCs for all combinations in the cube.
    "Sold to party is new"-- where is this new? in the cube data?
    "contents of the infocube not contained in BasicPlobStruc." - You get this warning if you have lets say 4 characteristics in your cube and only 3 of them in the planning object structure. This is ok. The rule of thumb is that "Your planning object structure has to be subset of your infocube". Which means that you cannot have 3 characteristics in cube and have all those 3 +1 additional in POS.
    This still does not stop the system from creating all combinations int he cube as CVCs.
    The possible reasons why the combinations(CVCs) are not generated from cube:
    1. If there are empty values in a record like below
    Plant--Materialsales org.-customer---qty.
    P1--M1SO1____----10
    P2--M2SO2C2--
    17
    The system only creates the combination P2M2SO2C2 but leaves out the first combination..Why? you have an empty value and system cannot take it so it leaves it out.
    2. If you are checking the flag "Check SCM master data" in MC62 while CVC creation. The system checks the master data for products, locations and if the product or location does not exist the system doesnot create the corresponding combination.
    Please correct me if I misunderstood you and also do not hesitate to ask more questions for clarity.

  • Sales forecasting scenario for production and procurement

    Hello Gurus
    We have currently one scenario  need your inputs and expertise
    We have a requirement for the Sales forecast for the production and procurement planning. More over its like demand planning but sales needs to have a 6 months or yearly sales forecast in the system.
    Is there any option or functionality available for the same.in  SAP-SD
    Thanks inadvance
    Regards
    Venkat

    Hi KV chalapathi
    check this link
    How to maintain Sales forecast or projection in SAP
    hope clear your issue
    Regards,
    Krishna

  • S076 SOP table for SD report (Sales Forecast Report ).

    Hi
    We are using S076 SOP table for SD report (Sales Forecast Report ).  This has only material number as key at present , where as we want to know if flexible planning will give material/shipto as key for forecast.
    Thanks In advance .

    Hi
       These are the key figures I am seeing in OMOJ , As I am new to this functionality                                  I am not able to add new key figures , can I request you to explain it to me ......
    Key figure                     F D 
    Sales     
    Production                         
    Stock level                        
    Target stock level                 
    Days' supply                       
    Target days' supply                
        Thanks

  • Sale order to consume Sale forecast created by MD81

    Dear Gurus,
    I have created a sale forecast using T-code MD81, 'CusReq" is reflected in MD04...I conduct a planning run and planned orders are generated and subsequent process orders and this stock is now credited to WH stock... But the "CusReq" is not disappearing from MD04, as a result of which When I am creating a sale order Using VA01, it is only showing available qty in WH as remainder after the MD81 Requirement...
    How can I make the sale order consume the sale forecast (CIR) that was created using MD81.??
    Regards
    Sri.

    Dear Mr.Raja sekaran,
    Pls try to refer the below links which will helps you to solve your issue.
    Sales Order Conversion to Production Order
    Integration between PP and SD module
    Make to order Flow in SAP
    Regards,
    N.S.Rao

  • Sale order not consuming sale forecast

    Dear Gurus,
    I have created a sale forecast using T-code MD81, 'CusReq" is reflected in MD04...I conduct a planning run and planned orders are generated and subsequent process orders and this stock is now credited to WH stock... But the "CusReq" is not disappearing from MD04, as a result of which When I am creating a  sale order Using VA01, it is only showing available qty in WH as remainder after the MD81 Requirement...
    How can I make the sale order consume the sale forecast (CIR) that was created using MD81.??
    Regards
    Sri.
    Edited by: srirag nair on Aug 26, 2009 1:34 PM

    Hi,
    Customer Indepnedent requirement is a sales order as treated by MRP.
    The sales order consumption works with PIR not with Customer requirements.
    Further in most cases, consumption means not PIR reduction.
    it is consuming the planned orders created for PIR's by allocating to sales orders.
    For ex; in a MTS scenario,
    PIR ---1000
    PLanned order 1000
    Sales order 1500
    After MRP
    PIR--1000
    PLanned order 1000
    Planned order 500
    Sales order 1500
    PIR reduction from MD04 happens when GI happens for the sales order or GR for Production order depending the Planning strategy.
    Regards
    Ratan

  • Production List and Sales Order list on the basis of Sales Forecast - MRP

    Hi all,
    One of our user wants to use MRP. what he wants is that he puts sales forecast in the system and in the basis of that sales forecast, 2 reports should be generated from system , one will tell that when production should be started to meet sales forecast for every finished good and 2nd report will tell that when sales orders should be created for raw materials to achieve sales forecast for every finished good.
    Is that possible?? Please tell me in steps that how I should I proceed? what changes should be done in SPRO and in master data?
    Please respond.
    Best Regards,
    AI.

    Hi AL,
    As such, this is a basic functioanlity of MRP.
    Once you enter a forecast & take a MRP run system proposes, when to start the production based on the production leadtime &  purc.reqns for the raw materials based on the procurement lead time.
    And the same can be viewed from various reports..FOr example MD04.
    For this to work the MRP configurations should be valid.
    Could you please confine your question to a specific query..?
    Thanks & regards
    Mahesh

Maybe you are looking for