STO Problem  - Condition record missing

Hi,
I am facing the following issue while creating P.O
I have mentined a pricing procedure with condition Pi01 ( for moving average price ), ZMRP ( which is maintained in SD. condition records are filled ) and ZSTO which for calculating excise and is based on ZMRP.
Condition record of ZSTO is filled in the MM side.
Now, when I try to make a P.O. by ME21, I get the error message that " mandatory Condition ZSTO is missing".  I have analysed the ZSTO access sequence. It OK and maintained.
The Error Message No. is V.1801.
As a result of the above issue, the excise is not flowing in the order when doing goods transfer from Plant.
Thanks & regards,
KVinod

Hi,
My main issue is that in the P.O, which I am creating  by ME21N, I am getting an error  message that "Condition Type ZSTO's records are missing" . Even though its record is maintained in the correct combination.  The access sequence is correct. It is assigned at the right place in STO pricing procedure.
To elaborate further on this, in my STO pricing procedure, I am using condition type P101( for moving average price), ZMRP ( which is the MRP of the item and maintained in SD by VK11), Freight condition and condition type ZSTO . ZSTO is maintained in the MM side.and is calcuIated as 4% of ZMRP. I  am getting all the condition while doing ME21N, except ZSTO.
Pl give me solution, why I am not getting the ZSTO condition record in ME21N.
Thx & regards,
KVinod

Similar Messages

  • Inquiry - PR00 condition record missing

    Hi
    I looked for a solution for my problem in this forum and elsewhere and hence my post.
    I am in process of creating a creating a Inquiry but there is an error indicating "Pricing error: Mandatory condition PR00 is missing".
    There is a PR00 condition record for this material. I checked pricing analysis and notice system is not reading this condition record. Access sequence is indicating condition record is missing.
    What could be the problem?
    Thanks

    Your problem is system is not determining pricing date.
    In sales tab button of inquiry, enter pricing date.
    Now go to Item conditions tab and click update button and select carry out new pricing.
    Your problem should be solved now.
    For inquiries, system takes 'pricing date' from 'valid from date' field.
    I presume, you did not also give 'valid from date' in your Inquiry.
    The reason why it is happening is because in IN order type, transaction VOV8, proposal for pricing date comes from proposal based on valid from date.
    In future, assign dates in Valid to and from fields and you would not see this problem again.

  • Condition record missing error in Condition analysis

    Hi Gurus,
    I am getting following mentioned error pricing procedure under conditions tab Analysis " Condition record is mssing" .I have maintained the condition table for Dest ctry /Tax indi plant /TI Acct assg /Tax ind /vendor in table # 905 .This has been assigned to access sequence .But what is happening it is skipping this table and finding the next condition table Dest ctry /Tax indi plant /TI Acct assg /Tax ind  in table # 904 .The first condition is above the second level still it goes and find 904 .Why? I want it should satisfy 905 table.
    Please let me know where I am going.
    Nitin Amritkar

    Hi,
    The access sequence you have created  need  to assign to a condition type , which is created for your purpose at the same node in spro, also you have to create a condition record at MN04 for this combination of sequence.then the access sequence assigned in your condition type will get the condition record value and populates in the conditions of the PO.
    please see that the condition type created to be aslo in the schema with proepr calculation logic.
    If you maintain like this , if the condition record record has not been created also, condition type will come into the condotions input tab so that you can maintain the condition manually at least.
    Regards,

  • Condition Record PI01

    Hi All,
    I am processing the intercompany STO Scenario.
    I have one issue here regarding the condition record of PI01..
    1)When it is Intercompany Sales, the condition record for PI01 is maintained w.r.t Sales Org of Ordering Company code and Plant of Supplying Company code.
    Whether I am Right???
    2)When it is Intercompany STO, the condition record for PI01 is maintained w.r.t Sales Org of ??? and Plant of ????
    Kindly Help me.
    With Regards

    Dear Customer,
    here some explenations for condition PI01:
    Intercompany business processing describes business transactions which take place between two companies (company codes) belonging to one organization. The ordering company orders goods from a plant, which is assigned to another company code.
    Because the two companies balance their accounts independently, the delivering company must bill the ordering company for the goods. This internal billing transaction is carried out by means of an intercompany billing document. The delivering company bills the ordering company at a price that allows the delivering company to cover its costs.
    For detail about intercompany customizing please refer to online documentation section u201CBilling u2013 Intercompany Business Processingu201D.
    To map this special scenario into pricing two condition types PI01 and PI02 have been associated with intercompany business processing,
    Condition     Name                    Use
    PI01          Intercompany price           Used to calculate quantity dependent price.
    Fixed. Rate per material unit
    PI02          Intercompany percent     age      Used to calculate intercompany price as a
    percent of preceding pricing values.
    These condition types specify that the price charged by the delivering plant to the sales organization is shown as a statistical value in the sales order and an effective charge in the internal invoice.
    The condition records you create and maintain for intercompany billing are the same kind of records that you create for pricing in general.
    2.     Settings for Customizing
    Condition type configuration
    u2022     Configure PI01/PI02 with condition category u2018Bu2019 (Price)
    u2022     Both conditions must be assigned to condition type u2018Iu2019 (price for intercompany billing)
    u2022     Use calculation type  u2018Cu2019  (quantity dependent) for PI01, calculation type u2018Au2019 (percentage) for PI02
    u2022     Depending on your condition use access sequence PI01 or PI02.
    u2022     Please note that PI01 and PI02 are item conditions only. Also no group condition flag should be set!
    Pricing Procedure Configuration
    u2022     The condition MUST be configured below all other pricing conditions and flagged statistical.
    u2022     Standard requirement 022 is provided to ensure that conditions PI01 and/or PI02 are only found in intercompany billing documents.
    Note about how these work.  These conditions will be statistical on all SD documents other than intercompany billing documents (VBTYP = 5 or 6).  When generating intercompany billing documents the condition will be activated by deleting the statistical flag. This measure leads that all preceding conditions will be deactivated because of the u201Clast active price winsu201D logic implemented in form XKOMV_BEWERTEN, program LV61AF0X.
    I hope that the information are helpful.
    regards
    Claudia

  • MWST mandatory condition is missing

    Hi experts,
    Let me explain the scenario first,i have created a contract & saved it here every thing is ok,but when i ma trying to create billing with respect to contract.it is throwing a message "mwst mandatory condition is missing".i have checked the following.
    I have gone to condition record and checked it is maintained anyhow if it was not maintained then it won't pick in contract.
    checked the teax classification in material master & customer master (it is maintained),gone to pricing analysis and checked what i observed is for mwst condition it is showing "condition record missing" but when i checked in contract for mwst the conditon record is picked (here the record is maintained on country/mat tax classification/cust classification),where as in billing is not picking.may i know where i may went wrong.
    Thanks & regards
    satish kumar ijju

    Hi Prakash,
    i have checked the pricing analysis at billing level & found that "the MWST condition is not found for the condition record country/cus tax classification" but where as if i check it in contract it showing the MWST condition is found for country/cust tax clasification /material tax classification.here what i observed is the conditon material tax classifcation is picked.so where should i correct it.

  • IPhone Restore + Pairing record missing.. HELP!!!

    I restored my iPhone 4S and when it restarted, I got an error message stating "iTunes could not connect "iphone" because pairing record is missing"... I have restarted my computer numerous times and reinstalled my itunes twice. My iphone is now blank and won't connect... PLEASE HELP

    I had the same problem (pairing record missing) and was finally able to fix it. My host computer is a Windows 7 64-bit setup. I kept reading where others solved the problem by eliminating the Lockdown folder, but I couldn't find that folder in Windows. But it was there in the following location:  C:\ProgramData\Apple\Lockdown. After closing iTunes, I simply renamed the Lockdown folder to Lockdown.old and restarted iTunes. I then plugged in my iPhone USB connection and it worked. (Changing the folder name required Administrator privilige.)

  • Condition record is missing in sales order

    can u please help me on my issue,my issue is in my sales order there are the different types of materials are there,on which the tax is applicable as12.5% on few materials,20% on few materials,on service materials tax is 10%, 2%, 1%,depending on this i have mapped the conditions and it is calculating accordingly,but when i  see in sales order by selecting one material,when i go to conditions,analysis of that particular line item,it shows 10% 2% 1% condition records are missing,same wise verse when i select another condition and see the analysis it shows 12.5% condition record is missing,when i go and select the another condition,if i check the analysis it shows 20% tax condition record is missing,but its not throwing any error,and showing document is complete,can any one suggest is it the right procedure or i have to make any changes in to it.

    Hi
    I see no issue in this. It is correct system behaviour.
    When you have different tax rates for different materials, obviously the condition records will be accessed based on the entries maintained for each material.
    E.g For material with 12.5% tax rate when you check in vk13, you will find only that entry and no entries for 20% and 10%, 2% and 1%.
    So the access sequence fetches only what has been maintained in VK11 for each material.
    This is absolutely fine. Go ahead and save the order.
    Regards
    Madhu

  • Creation of condition record (MEK1) for freight w.r.t. vendor in STO

    I am working in ECC 6.0 environment. My requirement is to fetch value of freight automatically w.r.t. selected vendor in condition while creation of STO.
    How can i define condition record by MEK1 for the same? Which access sequence needs to be assign to freight condition for creation of condition record of the same so system can fetch value of freight in STO w.r.t. vendor?

    hi,
    Create one access sequence for freight conditon with follwing table and assign the same that access sequnce to condtion .
    665     Vendor/Customer/Material
    716     Vendor/Plant/Material
    give the fright accout key for valution with FG cost add and seperate GR/IR vaules for vendor payment.
    while purchase order update conditon and in the view detial mentain transporter vendor for the same .
    pass the miro ref planned delivery cost
    Sans.

  • Update SO after creating missing condition record

    Hi Gurus,
    I was getting error message that missing MWST condition in Order, then I investigated and created missing condition record in VK11. Now I would like to update the Sales order and tried update tab on condition but invain.
    Initially the document was created on 17.11.2008 and today condition record was created 18.11.2008.
    Kindly help me in resolving this.
    Thanks
    Bawa

    Dear Bawa,
    While creating Condition Record "MWST" in VK11/ 12;
    What were the Dates maintained in Fields:
    1. Valid From (try with back-date maintenance)
    2. Valid To (Maintain as 31.12.9999)
    Once done, try to Update with "G - Copy pricing elements unchanged and redetermine taxes", in Sales Order.
    Best Regards,
    Amit

  • Excise condition Record Problem

    I have Created one excise Record for one tax code (FOR EX :M0) ( T-Code :FV11, key combination : Plant  / Vendor / Material ).
    Then i went for creating po, If i take that tax code ( M0) only, system has to be those details right....
    But it's not happening like that.... If i take different tax code ( FOR EX : M1 ) ( which is not having any condition record )... then also system is picking all the condition.
    Why it is happening like this ?
    Please give me any suggestion for this.

    In standard SAP .... I didn't have Plant/Vendor/Material / Taxcode combination right....
    I will explain my problem...
    I have created one PO ( for 1000 plant , A material  & X vendor ) & i have mainted condtion record for that % BASED CONDITIONS.
    There is no problem.
    But before closing that po, my user has to raise one more PO with same combination, but duties are different.... i mean to say quality based condition will come in to picture.
    Here what i have done is i have changed Valid to date in FV11.... Then in MIRO I couldn't able to get the condition FOR PREVIOUS PO... SO what have to do plz suggest me

  • Condition record is missing

    Hi!
    When I click the Update button in me21n under Conditions tab, the price does not update. Then when I clicked Analysis, here's what I saw in out VAT amount:  COndition record is missing.  How do we configure this?
    Thanks so much!
    Regards,
    Paula

    create cond record in fv11 for vat cond.  possibly jvrd.

  • Problem Cross Selling - No condition record to find but material shows up

    Hi!
    I have a problem with one material which always pops up in the sales order - cross selling list but I cannot see the condition record (VB43).  I do not want this material in the cross selling list, but how do I get it out?
    Any advise would be appreciated.
    Thanks,
    Stefan

    Hi Stefan,
    please check note 869601:
    1.  Question: What options are there to create a Cross-Selling
        relationship between two or more materials?
        The SAP standard system provides two options:
           -  Create a condition record using Transaction VB41.
           -  Start the analysis run (report SDCRSL01) using Transaction
              SDVK. The companion sales analysis statistically determines a
              list with the double combinations of materials that are most
              common. You must specify the specified identifier as an
              attribute of the SD_DPP_CROSS_SELLING function module in the
              access sequence of the product proposal schema in Customizing.
    hope this helps!

  • How to create STO Condition record for a condition Type ?

    I am doing config for STO.
    in MEK1 , it is asking for Vendor, but in my case I am doing STO by using delivery VL01 and receipt by MIGO.
    I want to know abt- How to create Condition Record for STO so that STO order will have Moving Average Price f Material.
    Sorry I m new to MM so pls help.

    Solved

  • Missing Condition record price in PO history tab

    Hi
    I have a scenario where in the condition record values are coming in conditions tab of PO and the discounts are calculated and shows net price which is less than the Gross price in conditions tab, But when i check in Purchase order history tab, for goods receipt, only Gross price is coming not the Net price.
    can any one help in this??

    Hi,
       The po price will be greyed out if the price is determined based on discount or similar conditions. You have to change the price at item level - conditions tab.
       But in your issue, the PO is already having subsequent documents. (Hope you found the issue in dev only, not in PRD) You may cancel the already posted documents (GR and IR). Now, correct the condition type (acrual flag in M/06) and then assign the acrual key against the condition type in the pricing schema in M/08. Assign the GL account for the acrual key in OBYC. Create a new PO and test the scenario again.
    Regards,
    AKPT

  • Problem in Condition record Creation

    I am creating condition record in ML51
    My amount is 95.20 INR
    System is issues the error message Input must be in the format

    Hi,
    Please check the format assigned to the user ID.
    As different ID in same client can have different formats.
    You can either ask your Basis consultant to check the format assigned or do it your self throgu T code SU01.
    Hope it will help.
    Regards,

Maybe you are looking for