Stopping Services Installation Error
When i try to uprgrade/install the new itunes, for the new ipod i just got it installs for a bit but stops at stopping services and waits a few minutes then bring up a pop up saying "service "ipod service"(ipodservice) could not be stopped. Verify that you have sufficent privellages to stop system services. Can anyone help me?
That can happen sometimes if the itunes installer is having a hard time shutting down either itunes or quicktime (or applications using quicktime) prior to the install. So let's try a "download, restart, then install strategy."
Leave your ipod unplugged.
Download and save a copy of the itunes installer to your hard drive. (Do not run the install on line, and do not start the install by clicking on the iTunesSetup.exe (installer) file just yet.)
Latest iTunes Installer
Shut down running applications and restart the PC.
Do not open any other applications prior to attempting the iTunes install. Switch off antivirus and antispyware applications prior to the install.
Now start the install by doubleclicking the iTunesSetup.exe file.
Does the install go through properly this time?
Similar Messages
-
Itunes "Apple Mobile Device Service" Installation error
Im trying to install Itunes and i receive this error:
"Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
I started services.msc and there isn't a service called Apple Mobile Device there.
I also ran the Installation in Run as Administrator and i still receive the same error.I've been having the same problem on my Windows 7 64-bit computer. If you are running a 64-bit system, and are installing the 64-bit version of iTunes, the problem may lie in where the program is being installed. The default location that showed up for me was "Program Files (x86)" which is for 32-bit programs. Once I changed the default to just "Program Files" (which is for 64-bit programs) everything seemed to install correctly. Before I tried this install, i cleaned up everything: ran Registry Mechanic, Malwarebytes, Spybot Search and Destroy, then closed unncessary files and programs; closed unnecessary processes using Task Manager, I did leave my Norton running.
Hope this helps. -
Shared Services Installation Error
Hi all
im very new to Essbase and have little experience in the installation process.
I followed the documentation and managed to install Shared Services (SS) and the BI products.
I encountered and error when trying to install some essbase analysis products and could no longer start shared services. I proceeded to un-install and re-install the packages again thinking it would be simpler.
When i re-installed SS a fresh i received an error on the command line when attempting to start the configuration utility despite receiving non errors in the actual installation.
This is as follows:
'JRE or JDK not found. Exiting'
'Java Home not Set'
'Exiting'
I checked the instalation log and found this:
(Nov 18, 2008 1:37:33 PM), Install.product.install, com.hyperion.install.common.ZipFiles, dbg, Start installing Opatch_validationUtilityFiles
(Nov 18, 2008 1:37:33 PM), Install.product.install, com.hyperion.install.common.ZipFiles, err, java.io.IOException: entry 9ec949ccd68b4cd04794605fc51edf76/Opatch_validationUtilityFiles/zipedContent does not exist in C:\....\Hyperion\V11229-01\setup.jar
STACK_TRACE: 17
java.io.IOException: entry 9ec949ccd68b4cd04794605fc51edf76/Opatch_validationUtilityFiles/zipedContent does not exist in C
\Hyperion\V11229-01\setup.jar
at com.installshield.archive.ZipURLConnection.getInputStream(ZipURLConnection.java:63)
at java.net.URL.openStream(Unknown Source)
at com.installshield.wizard.service.AbstractWizardServices.getApplicationResource(AbstractWizardServices.java:667)
at com.installshield.wizard.service.AbstractWizardServices.getResource(AbstractWizardServices.java:676)
at com.installshield.product.ProductAction.getResource(ProductAction.java:426)
at com.hyperion.install.common.ZipFiles.install(ZipFiles.java:135)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:1916)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:5195)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(InstallableObjectVisitor.java:369)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(InstallableObjectVisitor.java:333)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(InstallableObjectVisitor.java:133)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:4563)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:3758)
at com.installshield.wizard.service.AsynchronousOperation.run(AsynchronousOperation.java:41)
at java.lang.Thread.run(Unknown Source)
There is no JRE Folder within the \Hyperion\common folder containing the jvm.dll that im told by a colleague usually exists.
Im running Vista Buisness, and have the JRE 5.0 Update 11 installed if thats any help.
Any help would be greatly appreciated.
Thanks
Edited by: user10621050 on 18-Nov-2008 06:02The path was "C:\Hyperion\deployments\Tomcat5\bin\HyS9SharedServices.exe" Im guessing this is a consequence of the install proceedure not being done correctly by msyelf? Also found this in the conifgtool lo:
(18-Nov-2008 13:39:34), Install.product.install, com.installshield.wizard.StandardWizardListener, dbg, java.lang.ExceptionInInitializerError
STACK_TRACE: 40
java.lang.ExceptionInInitializerError
at com.hyperion.plaf.HYSLLookAndFeel.initComponentDefaults(Unknown Source)
at javax.swing.plaf.basic.BasicLookAndFeel.getDefaults(Unknown Source)
at javax.swing.plaf.metal.MetalLookAndFeel.getDefaults(Unknown Source)
at com.hyperion.plaf.HYSLLookAndFeel.getDefaults(Unknown Source)
at javax.swing.UIManager.setLookAndFeel(Unknown Source)
at javax.swing.UIManager.setLookAndFeel(Unknown Source)
at javax.swing.UIManager.initializeDefaultLAF(Unknown Source)
at javax.swing.UIManager.initialize(Unknown Source)
at javax.swing.UIManager.maybeInitialize(Unknown Source)
at javax.swing.UIManager.getDefaults(Unknown Source)
at com.installshield.wizard.swing.SwingWizardUI.initialize(Unknown Source)
at com.installshield.wizard.StandardWizardListener.wizardInitializing(Unknown Source)
at com.installshield.wizard.Wizard$WizardListenerInitializer.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.lang.NullPointerException
at sun.awt.FontConfiguration.getVersion(Unknown Source)
at sun.awt.FontConfiguration.readFontConfigFile(Unknown Source)
at sun.awt.FontConfiguration.<init>(Unknown Source)
at sun.awt.windows.WFontConfiguration.<init>(Unknown Source)
at sun.awt.Win32GraphicsEnvironment.createFontConfiguration(Unknown Source)
at sun.java2d.SunGraphicsEnvironment$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.java2d.SunGraphicsEnvironment.<init>(Unknown Source)
at sun.awt.Win32GraphicsEnvironment.<init>(Unknown Source)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
at java.awt.image.BufferedImage.createGraphics(Unknown Source)
at com.hyperion.plaf.HYSLImageUtils.toBufferedImage(Unknown Source)
at com.hyperion.plaf.HYSLImageUtils.grab(Unknown Source)
at com.hyperion.plaf.HYSLComponentImage.<init>(Unknown Source)
at com.hyperion.plaf.HYSLComponentImage.<init>(Unknown Source)
at com.hyperion.plaf.HYSLToolBarBorder.<clinit>(Unknown Source)
... 14 more
(18-Nov-2008 13:39:34), Install.product.install, com.installshield.wizard.StandardWizardListener, err, could not initialize interface swing
(19-Nov-2008 10:03:12), Install.product.install, com.installshield.wizard.StandardWizardListener, dbg, java.lang.ExceptionInInitializerError
STACK_TRACE: 40
java.lang.ExceptionInInitializerError
at com.hyperion.plaf.HYSLLookAndFeel.initComponentDefaults(Unknown Source)
at javax.swing.plaf.basic.BasicLookAndFeel.getDefaults(Unknown Source)
at javax.swing.plaf.metal.MetalLookAndFeel.getDefaults(Unknown Source)
at com.hyperion.plaf.HYSLLookAndFeel.getDefaults(Unknown Source)
at javax.swing.UIManager.setLookAndFeel(Unknown Source)
at javax.swing.UIManager.setLookAndFeel(Unknown Source)
at javax.swing.UIManager.initializeDefaultLAF(Unknown Source)
at javax.swing.UIManager.initialize(Unknown Source)
at javax.swing.UIManager.maybeInitialize(Unknown Source)
at javax.swing.UIManager.getDefaults(Unknown Source)
at com.installshield.wizard.swing.SwingWizardUI.initialize(Unknown Source)
at com.installshield.wizard.StandardWizardListener.wizardInitializing(Unknown Source)
at com.installshield.wizard.Wizard$WizardListenerInitializer.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.lang.NullPointerException
at sun.awt.FontConfiguration.getVersion(Unknown Source)
at sun.awt.FontConfiguration.readFontConfigFile(Unknown Source)
at sun.awt.FontConfiguration.<init>(Unknown Source)
at sun.awt.windows.WFontConfiguration.<init>(Unknown Source)
at sun.awt.Win32GraphicsEnvironment.createFontConfiguration(Unknown Source)
at sun.java2d.SunGraphicsEnvironment$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.java2d.SunGraphicsEnvironment.<init>(Unknown Source)
at sun.awt.Win32GraphicsEnvironment.<init>(Unknown Source)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
at java.awt.image.BufferedImage.createGraphics(Unknown Source)
at com.hyperion.plaf.HYSLImageUtils.toBufferedImage(Unknown Source)
at com.hyperion.plaf.HYSLImageUtils.grab(Unknown Source)
at com.hyperion.plaf.HYSLComponentImage.<init>(Unknown Source)
at com.hyperion.plaf.HYSLComponentImage.<init>(Unknown Source)
at com.hyperion.plaf.HYSLToolBarBorder.<clinit>(Unknown Source)
... 14 more
(19-Nov-2008 10:03:12), Install.product.install, com.installshield.wizard.StandardWizardListener, err, could not initialize interface swing -
Integration Services Installation Error 6801
Hello:
I am trying to install integration services on a server I just P2Ved running 2008 R2 x64, to a 2012 R2 hyper-v cluster but am receiving an error message during install. It detects a previous version and asks to update.
The installation gets to "Installing Guest Components..." then fails with the following error message:
Error
An error has occurred: One of the update processes returned error code 6801.
Thanks,
-MattHi,
Here is the link:
http://blogs.technet.com/b/virtualization/archive/2013/04/19/how-to-install-integration-services-when-the-virtual-machine-is-not-running.aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
SCOM 2012 R2 Reporting services installation error - data reader account
I have successfully installed SCOM 2012 R2 and SQL 2012 SP1 on the same server. I was trying to install the reporting server piece of SCOM.
When I get to the part that asks for a domain account, I get this error:
"Data Reader account provided is not same as that in the management server"
The account is not the same as the management server, and it does have read access to the data warehouse and reporting databases. Is there some other permission this account needs for reporting services?
Thanks.Adding more info：
I usually create the following account for SQL:
AD accounts for the following to be used with SQL Services:
SQL Agent for SQL Server Agent
SQL Analysis Services for SQL Server Analysis
SQL Database Engine for SQL Server Database Engine
SQL Reporting Services for SQL Server Reporting Services
For SCOM I create the following accounts:
SCOM DR - Used to deploy reports
SCOM DWR - for writing data from the management server to the reporting DW
SCOM MSA - Performs default actions
SCOM SDK - Used for updating/reading information from the operations Manager Database - Needs to be local administrator on the SCOM server
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Active Directory Management Gateway Service installation error
Hey,
When I attempt to install the 32 bit Server 2008 package from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=2852 I get an error saying that it's not the correct version. Just in case I tried the 3 other versions, but as
expected they give the same error. Any ideas?
Thanks In Advance,Hi,
Based on the description, we can try to contact Microsoft Customer Support Services to obtain the hotfix to see if it helps.
A hotfix rollup package for Active Directory Web Service is available for the .NET Framework 3.5 SP1
http://support.microsoft.com/kb/969166
Besides, the following thread focused on the similar issue with ours and can be referred to for more information.
Active Directory Management Gateway Service - install problem
http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_install/active-directory-management-gateway-service/d02c3ee7-ee4d-e011-8dfc-68b599b31bf5?tab=question&status=AllReplies
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Exchange 2010 SP3 upgrade fails at stopping services for Management tools station
Attempting to upgrade a Windows 7 SP1 64bit virtual machine from Exchange 2010 SP2 management tools to SP3 fails with the following error:
Summary: 11 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:15:19
Preparing Setup
Completed
Elapsed Time: 00:00:00
Stopping Services
Failed
Error:
The following error was generated when "$error.Clear();
& $RoleBinPath\ServiceControl.ps1 -Operation:DisableServices -Roles:($RoleRoles.Replace('Role','').Split(',')) -SetupScriptsDirectory:$RoleBinPath;
& $RoleBinPath\ServiceControl.ps1 Stop $RoleRoles.Replace('Role','').Split(',')
" was run: "Service 'NetBT' failed to reach status 'Stopped' on this server.".
Service 'NetBT' failed to reach status 'Stopped' on this server.
Click here for help...
http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex88D115&l=0&cl=cp
Elapsed Time: 00:15:19
Here is the powershell execute policy:
PS C:\> Get-ExecutionPolicy -list
Scope
ExecutionPolicy
MachinePolicy
Unrestricted
UserPolicy
Unrestricted
Process
Undefined
CurrentUser
RemoteSigned
LocalMachine
RemoteSignedHi Bad Dos,
Any updates?
You can also try to uninstall sp2 Management Tool first, then install SP3 directly.
Frank Wang
TechNet Community Support -
During the middle of the installation and error pops up, tittled 1921. The error says I need to verify my Apple Services something. Can somebody please help me? Thank You.
I'm having the exact same problem.
Here's my situation: I downloaded iTunes a few years ago, never thinking I would get an iPod. It's version 4 or so. Now I just got an iPod and I needed to update to the newest iTunes because iTunes 4 wouldn't recognize the iPod. I try to install and it stops at "Stopping Services", then after a little while this error pops up:
"Error 1921.Service iPod Service (iPodService) could not be stopped. Verify that you have sufficient privileges to stop system services."
I click Retry and it happens again. I click Cancel and it exits.
I tried to uninstall thru Control Panel, and the exact same thing happens: it stops at "Stopping Services" and the same error pops up.
I still have dial-up, and I have some songs that I haven't downloaded yet. I wonder if this has anything to do with it...
Please, if anyone can help, this is driving me nuts! Thanks. -
Exchange Installation Error on Mailbox role: Transport Service Step
The error I receive occurs at 47% of the Mailbox Role: Transport Service installation. The details of the error are as follows:
Mailbox role: Transport service
FAILED
The following error was generated when "$error.Clear();
if ($server -eq $null)
set-ExchangeServerRole -Identity $RoleNetBIOSName -IsProvisionedServer:$true -DomainController $RoleDomainController
" was run: "Active Directory operation failed on DC1.xxxxxx.xxxxxx.com. This error is not retriable. Additional information: The object cannot be added because the parent is not on the list of possible superiors.
Active directory response: 00002099: NameErr: DSID-0305109C, problem 2005 (NAMING_VIOLATION), data 0, best match of:
'CN=EXCH-MBOX1,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=AZGT,CN=
Microsoft Exchange,CN=Services,CN=Configuration,DC=xxxxxx,DC=xxxxxx,DC=com'
The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.
Also, when opening the setup log I have this:
[12/26/2012 17:51:25.0809] [1] [ERROR] A naming violation occurred.
[12/26/2012 17:51:25.0809] [1] [ERROR-REFERENCE] Id=ProvisionServerComponent___a16cb82f909348d3a32b9046f3bfb9ba Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[12/26/2012 17:51:25.0809] [1] Setup is stopping now because of one or more critical errors.
[12/26/2012 17:51:25.0809] [1] Finished executing component tasks.
[12/26/2012 17:51:25.0809] [1] Ending processing Install-BridgeheadRole
[12/26/2012 17:51:25.0825] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[12/26/2012 17:51:25.0825] [0] End of Setup
[12/26/2012 17:51:25.0825] [0] **********************************************
I have done a ton of searches trying to find a resolution to this error and there are two pages with a similar issue for Exchange 2007 but after trying the solutions suggested, the installation still fails with the same error.
http://social.technet.microsoft.com/Forums/en-US/exchangesvrdeploylegacy/thread/dfa9961a-9b20-4c17-ae4d-ebf44c66c18f/
http://exchangetroubleshooting.blogspot.com/2011/05/unable-to-run-preparead-command.html/
Some additional information:
This is a clean installation of Exchange 2013 in a forest that has never had exchange.
The domain and forest preparations run without errors and are at functional level of 2003.
The Exchange server has all prerequisites installed for a Mailbox server role and is running on a VM with Server 2012 as the OS.
This error occurs on other VMs as well that we are trying to implement as mailbox servers in the same forest.
I am running the installation as an enterprise, schema, domain admin.
Thanks for your help in advance.Yes. I cleaned out Exchange with ADSIEdit so I could re-run the Prepare Schema, domain and all domains and then re-ran setup to show the output here. But the install still failed.
PS F:\> .\setup /IacceptExchangeServerLicenseTerms /PrepareSchema
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis
COMPLETED
Configuring Microsoft Exchange Server
Extending Active Directory schema
COMPLETED
The Exchange Server setup operation completed successfully.
PS F:\> .\setup /IacceptExchangeServerLicenseTerms /PrepareAD /OrganizationName:AZGT
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis
COMPLETED
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have b
een detected in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.
aspx
Configuring Microsoft Exchange Server
Organization Preparation
COMPLETED
The Exchange Server setup operation completed successfully.
PS F:\> .\setup /IacceptExchangeServerLicenseTerms /PrepareAllDomains
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis
COMPLETED
Configuring Microsoft Exchange Server
Prepare Domain Progress
COMPLETED
The Exchange Server setup operation completed successfully.
PS F:\>
PS F:\> .\setup /IAcceptExchangeServerLicenseTerms /mode:install /roles:Mailbox /TargetDir:"C:\Program Files\Microsoft\Exchange Server\V15"
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Languages
Management tools
Mailbox role: Transport service
Mailbox role: Client Access service
Mailbox role: Unified Messaging service
Mailbox role: Mailbox service
Performing Microsoft Exchange Server Prerequisite Check
Configuring Prerequisites
COMPLETED
Prerequisite Analysis
COMPLETED
Configuring Microsoft Exchange Server
Preparing Setup
COMPLETED
Stopping Services
COMPLETED
Copying Exchange Files
COMPLETED
Language Files
COMPLETED
Restoring Services
COMPLETED
Language Configuration
COMPLETED
Exchange Management Tools
COMPLETED
Mailbox role: Transport service
FAILED
The following error was generated when "$error.Clear();
if ($server -eq $null)
set-ExchangeServerRole -Identity $RoleNetBIOSName -IsProvisionedServer:$true -DomainController $RoleDomainCo
ntroller
" was run: "Active Directory operation failed on DC1.XXXX.XXXX.com. This error is not retriable. Addi
tional information: The object cannot be added because the parent is not on the list of possible superiors.
Active directory response: 00002099: NameErr: DSID-0305109C, problem 2005 (NAMING_VIOLATION), data 0, best match of:
'CN=EXCHMBOX1,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=AZGT,CN=
Microsoft Exchange,CN=Services,CN=Configuration,DC=XXXX,DC=XXXX,DC=com'
The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.
PS F:\> -
Error: "Stopping Services" when upgrading itunes :-( help!
i needed to upgrade my itunes so that i could use my new ipod nano. when i went to do this, i got almost all the way through the download until it says "stopping services." Then after thinking for a long time an error comes up saying the "ipodservice" could not be stopped. Verify that you have sufficient privileges to stop system services. Now, my old itunes is missing. And the new one isn't finished installing. What should i do!?
i have windows xpthat can happen sometimes if the itunes installer is having a hard time shutting down either itunes or quicktime (or applications using quicktime) prior to the install. so let's try a "download, restart, then install strategy."
leave your ipod unplugged.
download and save a copy of the itunes installer to your hard drive. (do not run the install on line, and do not start the install by clicking on the iTunesSetup.exe (installer) file just yet.)
Latest iTunes Installer
shut down running applications and restart the PC.
do not open any other applications prior to attempting the iTunes install. switch off antivirus and antispyware applications prior to the install.
now start the install by doubleclicking the iTunesSetup.exe file.
TRY THAT THE GUY TOLD ME THAT AND IT WORKS NOW. its cool. -
Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?
Hello, Jdragone.
Thanks for the question. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H. -
iTunes stopped working on Windows 7, 64 bit. Uninstalled and attempted to reinstall. Windows installer error....iTunes. 10.6.3.25.
Downloaded latest version onto desktop. Will not complete install.Many thanks.
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
i have a small sharepoint farm "2 servers" (WFE) and SQL Server 2012 ,
i installed rsSharePoint for reporting services , as a read the Reporting services is Application Service with SQL 2012 not as SQL 2008 R2 with SharePoint integrated mode, so after installation when am trying to configure the SQL Server
Reporting Services Application services i got the below error :
"Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"
any kind of help would be much appreciated .I'm having the same issue, but to me it seems like the instructions I've seen are all over the place. I already have SP 2013 and SQL 2012 SP 1 installed. I already added the features for Reporting Services - Sharepoint and Reporting Services
Add-in for SharePoint Products. I didn't see the Reporting Service service in CA, so I ran the powershell scripts to add SPRSService and SPRSServiceProxy.
My initial quest, was to get the BI features enabled, which took me on the journey of adding the Report Services, then I got the error.
Then when I read this about installing the BI features
http://blogs.msdn.com/b/querysimon/archive/2012/11/26/installing-the-bi-features-of-sharepoint-2013.aspx, which I already had SQL and SP installed. Do I have to rerun and selct the SQL Server PowerPoint for SharePoint option? I have the PowerPoint
Configuration Tool on my SQL server, I run it and I get PowerPivot for SP 2013 Configuranoi is missing prerequisits: SP 2013 EE is required. Which I have EE.
Is Reporting Services different or in addition to the BI Feature (PowerPivot)?
Have I missed a step?
Thanks for you help.
Kim
Kim.Williams -
Hello,
we want to install Reporting Services in a 2-Tier Architecture. The Servers are the following:
SERVER1: Windows Server 2012 and SQL Server 2012
SERVER2: SharePoint 2013 (WFE)
Reporting Server is installed on SERVER1 and running. On SERVER2 the registration of the service through Powershell was done but it does not start. An Error when starting the Service on the server occurs with the message:
"Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key."
I have found the following in msdn stating that a minimal of the same SharePoint Installation must exist on the Reporting Server. The article is for SQL Server 2008 R2 and SharePoint 2010. Is this the case also for SQL Server 2012 and SharePoint 2013 and
the root of the problem? http://msdn.microsoft.com/en-us/library/bb510781%28v=sql.105%29.aspx
If so does this mean that I require for the installation another License?!?!
Thank you in advance!Hi,
According to your post, my understanding is that you wanted to install Reporting Services in a 2-Tier Architecture.
As the article
say, if you use Two-Computer Deployment, the first computer hosts an instance of a SharePoint product. The Reporting Services Add-in is installed on this computer. The second computer hosts SQL Server Reporting Services and the Database Engine.
The steps to install in a two-tier environment are very similar to a standalone environment hence you can go to refer to the ' Install Reporting Services SharePoint Mode for SharePoint 2013' article at http://msdn.microsoft.com/en-us/library/jj219068(v=sql.110).aspx
To install in a two-tier environment, you can refer to:
How to setup, configure and test
SQL 2012 SP1 SSRS with SharePoint 2013 SP1
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Oracle service registry installation error
I am getting installation error while trying to install Oracle Service Registry 11.1.1 on weblogic 11g....
any suggestion.
oracle.database.user=uddiuser
install.windows.menu=Oracle Service Registry 11.1.1
oracle.database.password=***
[java] BUILD FAILED
[java] C:\oracle\middleware\registry111\etc\setup\porting.xml:412: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\etc\setup\porting.xml:350: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\conf\porting\build-runner.xml:196: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\conf\porting\build-runner.xml:202: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\conf\porting\build-runner.xml:208: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\conf\porting\build-ear.xml:257: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\conf\porting\build-ear.xml:1031: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\etc\setup\setupserver.xml:788: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\etc\setup\setupserver.xml:774: Java returned: 1
[java] Total time: 3 minutes 22 seconds
Java returned: 1
Installation failed. If accessible, see "C:\oracle\middleware\registry111\log\install.log".
To correct installation parameters and resume installation click Recovery.
.I have used the oracle's OSR installation guide. I beg to differ if OSR is really enterprise ready product.
I dont think this is a specific problem with my installation. The point is that the installation logs is very poor to put it mildly.
you get a sense that this product is developed by school student and is not an enterprise ready software.
WebLogic Server Version: 10.3.4.0
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=
128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;;
C:\Oracle\MIDDLE~1\ORACLE~2\lib\osb-server-modules-ref.jar;C:\Oracle\MIDDLE~1\pa
tch_wls1034\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle
\MIDDLE~1\patch_oepe1040\profiles\default\sys_manifest_classpath\weblogic_patch.
jar;C:\Oracle\MIDDLE~1\patch_ocp360\profiles\default\sys_manifest_classpath\webl
ogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSE
RV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblo
gic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.4.0.jar
;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\mod
ules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-
contrib.jar;C:\Oracle\Middleware\Oracle_OSB1\soa\modules\oracle.soa.common.adapt
ers_11.1.1\oracle.soa.common.adapters.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\or
acle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\ORACLE~2\lib\version.jar;C:\Oracle\MI
DDLE~1\ORACLE~2\lib\alsb.jar;C:\Oracle\MIDDLE~1\ORACLE~2\3rdparty\lib\j2ssh-ant.
jar;C:\Oracle\MIDDLE~1\ORACLE~2\3rdparty\lib\j2ssh-common.jar;C:\Oracle\MIDDLE~1
\ORACLE~2\3rdparty\lib\j2ssh-core.jar;C:\Oracle\MIDDLE~1\ORACLE~2\3rdparty\lib\j
2ssh-dameon.jar;C:\Oracle\MIDDLE~1\ORACLE~2\3rdparty\classes;C:\Oracle\MIDDLE~1\
ORACLE~2\lib\external\log4j_1.2.8.jar;C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D
~1\config\osb;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\
Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;.;C:\Program Files\Java\jre6\lib\
ext\QTJava.zip;C:\Program Files\Rational\ClearQuest\cqjni.jar
PATH=C:\Oracle\MIDDLE~1\patch_wls1034\profiles\default\native;C:\Oracle\MIDDLE~1
\patch_oepe1040\profiles\default\native;C:\Oracle\MIDDLE~1\patch_ocp360\profiles
\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MID
DLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\
MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\oraclexe\app\oracle
\product\10.2.0\server\bin;C:\Program Files\Java\jdk1.6.0_24\bin;C:\progra~1\ora
cle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\
1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Fil
es\QuickTime\QTSystem\;C:\Program Files\Rational\common;C:\Program Files\Rationa
l\ClearCase\bin;C:\Program Files\Cepstral\bin;C:\apache-maven-2.0.11\bin;C:\apac
he-ant-1.8.2\bin;C:\Program Files\Enterprise Vault\EVClient\;C:\Oracle\MIDDLE~1\
WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Listening for transport dt_socket at address: 8453
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b51)
Java HotSpot(TM) Client VM (build 17.0-b17, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transpo
rt=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms256m -Xmx
512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogi
c.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\l
ib\weblogic.policy -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea..
. -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:co
m.bea.sbconsole... -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\O
racle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\s
erver -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1
-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -D
domain.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1 -Djrockit.optfile=C:\Or
acle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.se
rver.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\ser
vers\AdminServer -Doracle.domain.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\
BASE_D~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~1\USER_P~1
\domains\BASE_D~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE
~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\arisidprovider -Doracle.security.jp
s.config=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\fmwconfig\jps-confi
g.xml -Doracle.deployed.app.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\ser
vers\AdminServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateT
ypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracl
e\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pk
gs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dweblogic.mana
gement.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToCo
nsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1034\profiles\default\sys
ext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_oepe1040\profiles\default\sysext
manifestclasspath;C:\Oracle\MIDDLE~1\patch_ocp360\profiles\default\sysext_mani
fest_classpath weblogic.Server
Listening for transport dt_socket at address: 8453
<Apr 14, 2011 10:42:50 AM CDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ
JCE Provider self-integrity check for better startup performance. To enable thi
s check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Apr 14, 2011 10:42:51 AM CDT> <Info> <Security> <BEA-090906> <Changing the defa
ult Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disabl
e this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Apr 14, 2011 10:42:52 AM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting We
bLogic Server with Java HotSpot(TM) Client VM Version 17.0-b17 from Sun Microsys
tems Inc.>
Let me know if you need more information.
Thanks
Maybe you are looking for
-
Profit Analysis field grayed out
Hello All, I am trying to configure the "Activate Project Management in Controlling area" in PS. When I am trying to activate the components, the Profit Analysis field is grayed out. Since we are implementing COPA at our current client, I assume that
-
ECC5 installation: Error msg during Post Processing Oracle DataBase
Hello Gurus: I had installed Java and Oracle DB on C: drive which installed successfully. I was installing SAP on D: drive. This msg came up.It happened after five hours of final installation when it goes stage by stage in the final run. Switched to
-
Unable to select multiple with holding tax codes. This entry already exists in the following tables '' (ACPR) (ODBC -2035) [Message 131-183]
-
Hi, While am maintaining status, there are some default function keys assigned like F2, F9, SHIFT-F2.. I could not remove the default values assigned to them.. I wud like them to be empty. How to do that? Regards, Kalai
-
Xfce keyboard shortcuts -- where to configure the def folder? [solved]
Hello, I've moved my user's home directory, the old one still exists. Now, when I run terminal via a shortcut, it opens at the old location. For thunar, it is the same. I haven't been able to find where to configure that. Any thoughts? Thank you Last