Storage type search

Hi Experts,
I am trying to create TO when I get the error message
"Data for storage type search is not defined (E 123 S)".
I may have missed something. Please help.
Thanks,
Mylene

Dear Mylene
Check this thread where the same issue was discussed
[Data for storage type search is not defined |Data for storage type search is not defined (A )]
thanks
G. Lakshmipathi

Similar Messages

Transfer Order : Data for storage type search is not defined (A   )

Dear Experts ,
While trying to use the Transfer Order and trying to determine the storage type this error appears :
Data for storage type search is not defined (A   )
Message no. L3007
Diagnosis
Information on the storage type search has not been defined.
How ever , I have already configured the search and here is the Storage Type search's data in OMLY
1. Warehouse number : W10
2. Operation : A "Stock Removal"
3. Indicator :   E
4. Stock Category : Blank
5. Special Stock Category : Blank
6. Storage Location Ref :10
7. Storage Type : 10E
Please Advice
Edited by: Sap Sap on Feb 24, 2011 10:54 AM

Hello,
The storage type in which you want to place the material or pick the material from has not been defined in the storage type search sequence.
You need to define the search sequence in customization so that storage type is determined automatically when the transfer order is created;
SPRO>>Logistics Execution>>Warehouse Management>>Strategies>>Activate Storage Type Search
In this go to determine search sequence and then
for warehouse number W10, operation as stock removal 'A' and in this maintained the relevant the storage type (10E) so that it is determined automatically.
I hope this helps.
BR,
Tushar

High Level Bin Search, before Storage Type Search

Hi,
Can anyone help me to guide, which user Exit/Badi, be used for searching Empty bins, before storage type search. I come to know from one of colleague below message.
"" if you want to check the quantities on a higher level (before storage type search ), you can use the user exit "+++".""
I am unable to understand which kind of user exit "+++".
Background: Want to do putaway with storage type 007: Our high rack is having space (Bins) with different capacity. One rack can have 4 type of racks.
We want to putaway material with different bin types in one storage type.
Regards,
Mainsh Gupta

Hi Vijay,
Thanks for your quick reply. I am trying user exit given by you. Once again I would like to submit my requirements here.
a) We have 98 racks in Warehouse.
b) Product is Ball Bearing.
c) Bearings are handeled in Ea, Issue and Stock unit is Ea
d) Alternate Unit of Measure is Box, i.e. per box quantity is mentioned into Material Master.
e) Each Rack is having 5 different type of bins.
f) We want to fill rack from bottom to top for first rack, and then next rack.
g) Once we do putaway for any material, each time system should pick Next empty bin, and each bin type is different.
Case 1) If going with Storage Type 007:
                i) Need to maintain palletization data in Material master WM view 2.
               ii) Can not maintain any capacity check for Capacity utilization in Material Master. Capacity is only Pallatization data.
              iii) While creating TO, System goes for placemet of material from bottom to Top in Rack, but give similar quantity for each bin, & these quantities are defined from Material Master from Palletization data.
              iv) In this case it is not checking bin capacity.
My query:
i) How can we split quantity during TO Creation based on Next Empty Bin avaialbe with certain capacity and all further bins with other capacity.
ii) Can we have different type of bins in one storage type if we are going for Storage type 007. or it is mandatory to have similar kind of bins.
Case 2) If going for Storage type 002:
              i) Not maintined Palletiztaion data in Material master.
             ii) Maintining capacity check in WM View 1.
            iii) Maintained Capacity check in Bin master.
            iv) WHile careting TO , system doesnot spilt quantity for next empty bins avaialbe, Only one line item comes for whole quantities. and system throw an error.
Message Number: Message no. L3068
Message Details: Maximum quantity for storage bin TR-15 will be exceeded by 740.000 PC
My query: How can we split TO quantity as per next empty bins available.
If you will give me your contact number, I can speak to you over phone and eleborate in more details for your clear understanding my issue.
Regards,
Manish

Data for storage type search is not defined (E FC1 ) in WM module

Hi friends,
I m working in Ware house management.I have created material document and using the matertial document number in LT06.
I am getting the following error while creating transfer order for material document in T-code LT06.
Data for storage type search is not defined (E FC1 )
Message no. L3007
Diagnosis
Information on the storage type search has not been defined.
Procedure
Contact your system administrator. Note down the values that are within parentheses in the error message.
Please advise me how to solve this error.
Thanks in advance.
Regards,
William

SAP does not know where to put the material.
You usually enable SAP by defining storage type indicators, that you maintain at the putaway and picking indicator fields in material master.
then you setup the storage type search based on this indicators.
SAP can then know in which storage type it shall search for a space to store your material.
As a first step check whether you missed to enter this indicator in your matrial master WM view

Storage Type +++ in Storage Type Search Sequence

Hi Everyone,
Can someone please explain me what a '++' signifies in the Storage type Search Sequence. Like for a warehouse, for a storage type indicator, for a stock category etc. one has defined storage type: '++' in the first storage type column. What does this mean. I understand '***' might imply all storage types are equal, try all. But what does +++ mean?

Hi VIk,
SAP help of the customizing node (sPRO > LE > WM > Strategies > Activate Storage type Search):
If you want the system to search through the entire warehouse number for stock pick, enter "***" (stands for strignent FIFO) as the storage type. The system then will search the entire warehouse for the oldest stock of the material. The entry "+ + +" means that the system branches to the user exit to the stringest FIFO process (MWMT0013).
Regards,
Csaba
Edited by: Csaba Szommer on Jul 27, 2009 8:54 AM

Storage Type Search for Multiple Storage Types

Hello experts.
I have an issue that I cannot seem to resolve.
Background
- We are using kanban strategy 0006 in order to move materials from Plant A to Plant B. Plant A is warehouse-managed but Plant B is not.
- Within Plant A we have one wm-managed Storage Location with many Storage Types.
- Within Plant B we have two Storage Locations ( each one representing a separate, physical building ).
- A majority of the kanban materials in use only have one Supply Area assigned to them. However we have approximately 15 materials that have multiple Supply Areas assigned to them. This is because these materials are common parts across two different Storage Locations in Plant B. As a result, they also have two different Storage Types assigned to them in Plant A ( the source of the material ).
Problem
Because we have common materials in two different Storage Types, the Storage Type Search (defined in OMLY) does not always return the correct Storage Type for the Stock Removal Strategy.
I understand that this occurs because the Storage Type Search is defined based upon the Warehouse Number, Removal/Putaway Indicator and the Storage Strategy. Therefore both Storage Types will use the same Storage Type Search when determining the Destination Storage Type for the transfer order.
FYI, here's an example :
- Material 123ABC is defined in Plant A, Storage Location SL00, Warehouse WH1 with Storage Types ST1 and ST2.
- Material 123ABC is defined in Plant B, Storage Locations SL01 and SL02.
- Material 123ABC has Supply Area SA1 for Storage Location SL01 and Supply Area SA2 for Storage Location SL02 defined for kanban.
- Material 123ABC has Stock Removal Strategy 003 assigned in the WM1 view for Plant A, Storage Location SL00 and Warehouse WH1.
- The Storage Type Search sequence defined for Stock Removal Strategy 003 is Storage Location SL01 then Storage Location SL02.
- When I execute kanban for Material 123ABC for Supply Area SA2, the Destination Storage Type for the transfer order should be ST2. However because the Storage Type Search is based upon the Warehouse (and not the Storage Type level), the Destination Storage Type for the transfer order is ST1 because it is the first item in the Storage Type Search sequence.
So my question : does anybody know how I can resolve this issue? We don't want to adjust our master data for these materials or supply areas. Is there a USER_EXIT that we can implement that will account for this condition?

Hi Mathew,
Based on the storage location indicator you can maintan different storage types for picking and putaway. I think your scnario willl be addressed using this indicator.Please explore this option before going for User exits.

ID Point for Storage Type V.S. Value in Storage Type Search Table.

I am trying to perform a GR without PO (MVT 501) for material ABC into Plant 1000, Warehouse number 100, Storage Location 0100.
During creation of Transport Order, the Destinated Storage Type appeared
is 011 (ID point for st.ty.010). However, the desired Destinated Storage Type should be 015 (High Rack) instead of 011.
I have checked the following configuration:
1. At the SPRO->LE->WM->Master Data->Define Storage Type, the value set for Field: Assigned ID (Identification point) for storage type under the Stock Placement Control = 011 (ID point for st.ty.010).
2. At the Storage Type Search Strategy, 015 is put as the first Storage Type, followed by Storage Type 001 (high Rack Storage)
3. And I found out that using LX03 (Bin Status Report) that there is no
Storage Bin created for the combination of the following
Plant 1000, WN 100, SLOC 0100, Storage Type 015, Storage Section 001
Since we do not have any Storage Bin created for Storage Type 015, it will display 011 as the destinated storage type during TO creation.
My question
After I have manually created a Storage Bin 03-01-01 for storage type 015, during the TO Creation, system still suggests 011 as Destinated Storage Type instead of the 015 I put in the 1st column of the Storate Type Search.
I already have the Storage Bin created for Storage Type 015, why the system still fails to pick it but suggests 011 from Assigned ID (Identification point) for storage type.

Dear Karthik
You are right, I did activated Indicator: Activate Storage Unit Type Check for Stock Placement in SPRO->LE->WM->Master Data->Define Storage Type
The Indicator: Storage type with storage unit management was also ticked automatically by system when I selected Indicator: Activate Storaget Unit Type Check for Stock Placement.
Are you trying to say the ID Port defined in Storage Type will have higher priority over the Storage Type value I maintained in the Storage Type Search Table?
I have already maintained the Storage Bin and I still do not understand why system still go for ID port. As far as I know, system will suggest the Storage Type from ID Port ONLY if storage bin in this storage type as their destination are not maintained in first in the other setting.
Quoted from SAP HELP
Identification point for storage type
Identification point (storage type) of the current storage type.
All goods movements that do not have a specific storage bin in this storage type as their destination are first directed to the identification point.
Here the goods are identified and a transfer order is generated for the actual transfer of the goods into the storage type concerned.
Please help.
Edited by: Daimos on Nov 4, 2011 3:25 AM

Block stuctue & storage type search

Hi all,
1. In case storage type (SUT managed ) with bulk structutre for e. g.
For tote the block structure is defined as 12*6=72
For pallate its defined as 2 * 1 = 2
Now ,
Does the system allow Keeping the tote of 72 SUT & also keeping the pallate of 2 at same time ?
If above scenario is not possible.
Is it possible to keep single pallate 1 & in remaining space 36 totes.
2. I have defined three storage type for the search strategy st1,st2,st3.
but even the empty storage bin is available in the st1 while creating TO its taking st3.
What could be the resons?

Hi dev,
Can you please explain how did you solve this issue?
Regards,
Prakash

Storage area search for storage type

Hi Gurus,
iam trying to create a TO for initiainl Inventory load ( movement typer - 999), I enter the source storage type / section / Bin and dest storage type / section / Bin. Iam facing the error ' No storage area search has been defined for this material and storage type '. Please advise
thanks
Karthik

Hello,
Please check whether you have maintained storage type indicator in WM view for a material.
Also check whether you have maintaied storage type search, bin creation for the storage type.
Hope this will clear
Regards,
Prashant

Search for material from 2 Storage types

Hi,
When creating a delivery for Subcon PO Via ME2O the transfer order is created automatically from the source storage type
657 ( for example). The requirement is that the system should also look for material from source storage type 460 ( for example).
I did the following customization ( SPRO path):
1) Logistics execution -> Warehouse management -> Strategies -> Activate storage type search - > Determine search sequence --
For the combination of Warehouse number & Mvt type 541 ( GI to Subcon delivery) -- 657 and 460 are assigned.
2) Logistics execution -> Warehouse management -> Activities-> Transfers-> Define Mvt types-> For the combination of Warehouse number & Mvt type 541 -- I have assigned source storage type as 657.
With the above the system does the search from 657 stoarge type only and not from the both.
Is there any other setting to meet this requiremnet?
Best regards,
Prasad

Hi,
I removed 657 source storage type in the 541 mvt type set up ( Source storage type is Blank) . In the Movement Type set up for 541, "Ref.Stor.Type.Search" field is already with 541.
The Storage Type search sequence is maintained for the combination warehouse number & 541 mvt as 657 and 460 ( storage types).
When Delivery is created for Subcon PO, The Transfer order is not created automatcially ( Only delivery is created)
The requirement in detail is as below:
There are 2 plants ( AL70 & AL77) linked to 1 Warehouse (AL1). When delivery is created for subcon PO in plant AL70, the TO is also created automatically with source storage type as 657 and destination storage type as 916. The additional requirement is when delivery is created for Subcon PO in plant AL77, the TO aslo should be created automatically with source storage type as 460 and destination storage type as 916.
Regards,
Prasad

Batch determination based on WM storage type stock positions

Hello experts,
I am hoping the get some advise on the best method to achieve this:
We have batch determination turned on for select customers and the system is proposing stock that is mainly in our each or lose pick storage types (110), the issue with that is the fact that we do not pick in less then case qty for those customers so if the stock doesn't exist in our general storage the user must re-determinthe batch codes before delivery release.
This process is becoming very time consuming so I would like to improve it.
My first thought is to create a custom check in the batch search strategy that will only propose batch codes that exist in our general storage (search strategy based on WM stock positions)
Are there any other options to achieve a batch search strategy based in WM stock positions other then the one above and does that solution sound practical?

I'm not referring to the type of picking either (i'm not referring to picking strategies at all). I'm referring to storage type search criteria defined in OMLY.
"We need batch determination based on WM storage type stock positions" -> you are running BD at delivery level and therefore, there is nothing from a standard perspective that we can do to run BD based on WM storage type again. Since the BD has already occurred, we need to find other venues to direct the pick to the appropriate storage types.
This is what I'm understanding but I reckon there's something that I'm missing and so let's take the below example and then you can get back with corrections:
R001 plant
ZM01 storage location
Z01 WH
110, 120, 130, 140 storage types (110, 120, 130 are case/lose pick, and 140 is general)
Since you had mentioned earlier that the BD is running at plant level, I'd assume the storage location ZM01 is automatically determined (since the batch resides in ZM01). Since the batch is already determined, based on your 'storage search strategy' (110, 120, 130) the system tries to pick this batch in these storage types. Now, when there is no full case, you have to manually change the storage type to 140 to pick and this is where the problem is. So, I was recommending that since there is no standard way to automatically pick the full case from 140, use the enhancement.

Storage Type 916 in the outbound delivery

SAP GURU,
When i am creating a outbound delivery against a sales order...as my Plant is warehouse mnamanged so Warehouse will automatically get determined in the delivery based on SPRO setting but i am not able to find out how storage type 916 at the item level in picking view is getting determinated automtically.
If i check storage type search criteria in SPRO..we have not maintained 916 storage type for my ware house and picking combination.
Plz help in getting the logic of 916 storage type.
Nitin

I got the answer myself ...Plz ignore my question.

How to restrict the material for speific storage type

Dear all,
i am maintained the X - material to 001 warehouse and 001 rack storage type when i try to create TO for putaway process it will allow me some other storage type like open,shelf....as per my client requirement it should not be .....
i am using manual strategy for putaway proces ....kindly guide me....
Thanks
Muthuraman.D

Hi,
The storage types during Putaway are proposed based on the strategy defined.
Change the stcok placement indicator in WM view 1.
If you have a storage type search strategy defined that matches your requirement, then maintain the same in WM view 1 for the material
Hope this helps
regards

WM - Storage Type Replenishment

Hi everyone !
I have a little problem with the storage type replenishement in WM.
I configured two replenishment movements for 2 storage types :
- First one for a storage type that manage the base unit of measure "pieces", and that has a "capacity check" based on material and a putaway strategy "I" (addition to existing stock).
- Second one for a storage type that uses the <u>Storage Unit</u> "Case" and uses a putaway strategy "L".
Then I configured the replenishement as "Transfer Order (random) imm.".
I have correct data in the material master.
The problem is that the system does not create any TO when confirming the TO that pass under the mimum stock.
<u>It has worked once</u> with the first replenishment movement, but configured with the putaway strategy "L", and without the Capacity Check (without any complication).
I think this is a problem during the automatic creation of the TO, maybe due to palletization data proposed during the automatic TO creation...
Does anyone has an idea ?
Thanks
Remi

When ever the stock level in a fixed bin for a particular storage type goes below the min bin qty replenishment is triggred automatically by running RLLNACH1 or manually by LP21 which creates TRs.And TRs are converted to TOs.
In your question you have given the Material, Warehouse
and Storage type only fixed bin is not there.
In the Material Master WM 2 view you need to maintian the fixed bin in storage bin field and the max bin qty and min
bin qty and the replenishment qty in their respective fields.
Configuration:
==========
Spro >> LE >> WM >> Activities >> Transfers >> Define Stock Transfers and Replenishment Control
Click on Maintian WM movement types and check whether replenishment movement type 320 (Std) is maintained.
Double click and maintain a value e.g 1 in the Ref stor type search field
And the same value 1 should be maintianed in the storage type search as below
Spro>> LE >> WM >> Strategies >> Activate Storage type search >> Define Search Sequence
Whse: oper:   Typ In:   stkcat: Splstk: Stoclass:   Wpc
200       A        XXX
Ref sto type   sto loc      1     2     3    4   5    6    7   8 .....
     1                            210
xxx is the type in mentioned in the MMR in WM view 1 in stk removal field.
F3 Back
Click on Define Replenishment Control for Storage Type
whse storage type Mtyp Repl. Replenish
200     210         320             1
Then execute transaction LP21 and enter the parameters like plnt, sloc,whse,sto type, Sto bin (Fixed bin in MMR),Material
Executing will create TR when Stock level is below the min bin qty.
TR can be converted to TO.

Function module to get WM storage bin,storage type based on Matnr

Logic to pick the storage bn (LQUA-LGPLA)based on MATNR and CHARG(batch).
The TO qaunt table LQUA is populated when a TO is created.So we need the same logic to get to be implemented .
Please provide the Function module or logic for the same

Hello Vikram,
What you want to do? When you need to use this functional module.
The following are the user exit available for WM.
o   MWMTO001 Update own data after TO creation
o   MWMTO002 Update own data after TO confirmation
o   MWMTO003 Own stock removal strategy
o   MWMTO007 Palletization and storage type search for stock placements
o   MWMTO004 Own stock removal strategy
o   MWMTO008 Storage type search for stock removals
o   MWMTO005 TO-related underdelivery
o   MWMTO006 Bin-related overdelivery and underdelivery
o   MWMTO009 Prevents deletion of TO items
o   MWMTO010 Determines total planned TO processing time
o   MWMTO011 Correction of processing time for TO item
o   MWMTO012 Transfer order split
o   MWMTO013 Enhancements of stock removal strategy "Stringent FIFO"
o   MWMPP001 WM/PP interface: Automatic TR creation
o   MWMRP001 Replenishment control: Selection of delivery items
o   MWMRP002 Replenishment control: TR quantity allocation
o   MWM2S001 Redetermining 2-step picking
o   MWMD0001 TO printing using print program RLVSDR40
o   MWMD0002 TO printing (multiple processing) through print program RLKOMM40
Hope this helps.
Please explain more about your business process to have accurate response.
Regards
Arif Mansuri

Storage type search

Similar Messages

Maybe you are looking for