Strange problem after rendering!

Hi guys , could you help me please? my system is Premiere Pro CS3, Win Vista32, 2gb Ram , integrated ATI xpress 200m with 128mb (with the last drivers), core2duo 1.8.
My problem is the following: after importing an AVI 640x480 30fps clip shot with my sony digital camera t20, i add it to the timeline, i play it and it works fine but right after rendering it , it jumps and flick. It also plays fine with windows media player so i was wondering why !!?!??
Are my setting of the project correct? I used DV NTSC 48khz project, but dont think that is something about these settings right? could it be main settings of premiere? i also read that some people had problems using the same graphic card 200m with premiere and vista,could the problem be connected with it?
thanks in advance if you can help...

No. Sorry. I have seen video shot on the same camera at 24fps and at 30fps and the difference was barely detectable. Both scenes were lit the same and shot the same other than frame rate. If we slowed it down it was detectable. Once played on a 20' screen it was a lot more evident, however. When the footage took up my entire area of vision, then the stuttering of the slower frame rate was easier to see. But on a smaller screen, no.
The "video" look is caused by a lack of depth of field and a sharper contrast, both of which should be addressed during production, not post. Just slowing the frame rate just isn't enough to make it not look like video.

Similar Messages

Strange problem after rendering reader extension

Pdf file is working well before rendering reader extension right. After reader extension right one page is automatically created double.
I cannot realize why the page become double. I was analysing with xfa debuger. All properties of page same but page2 is created double.
https://dl.dropbox.com/u/70850345/print/xfaDebuger.jpg
I also moved page 3 next to page1. Then page3 is created double after rendering reader extension right.
DO you know why this page is created double?

Hi,
there are several bugs in you form, which is really 'complicated'.
Most are allowed page breaks for subforms where you did not allow page breaks for the parent objects (the surrounding subforms or pages).
You also set several subforms flowable while the surrounding page are set positioned.
I fixed a few of the problems but not all as I had not the time.
The next thing I don't understand are the many masterpages which have almost the same content.
You'll need just one. All the rest can be placed on the body page(s).
In fact you also only need a single body page which is floating top-to-bottom and allows page breaks.
There you can place all the subforms you currently set as single pages.
https://acrobat.com/?d=pvrhlCnYZtnhkY8HAi7GwA

Strange problems after installing Solaris 10 u6 on 64-bit PC

Hi all,
I have run into some very strange issues after installing Solaris 10 update 6 on my 64-bit PC (it's almost new). The problems are with graphical applications and desktop environments based on GTK (so it seems, at least).
I have installed Solaris normally, following most of the default options and choosing the "Entire Group" software packages installation. However, after the first login I've seen that:
1. No user creation process was offered to me and I had to login as root (I find it pretty strange)
2. After logging in as root into JDK system, my screen went blank for a couple of seconds and then the system threw me back to the login screen.
3. Logging into the old CDE environment was possible, but launching Firefox from there (using a command line terminal) wasn't. It gave me the following error message:
ld.so.1: firefox-bin: fatal: libmlib.so.2: open failed: no such file or directory
ld.so.1: firefox-bin: fatal: relocation error: file /usr/bin/firefox/firefox-bin: symbol gtk_init: referenced symbol not found.
It's very strange because GTK toolkit and JDK environment are supposed to be the core functionalities provided by Solaris. Does anyone have an idea what's going on?
My system sum-up:
CPU: Intel Core 2 Quand Q6600 @ 2.4 GHz
RAM: 2 Gb of DDR2 SDRAM
Motherboard: MSI MS-7529 (Intel G31 chipset)
Monitor: AOC LM725
Graphics card: NVIDIA GeForce 9400 GT
Hard disk: 2 Western Digital HDs (SATA) 320 Gb each,
1 Western Digital external USB HD MyBook Essential 2, 500 Gb
DVD drives: 2 LG DVD drives (SATA)
Network card: Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC
I use my system in the following way:
On the first hard disk, I have a one-partition 32-bit Windows XP SP3 installation (ported from my old computer).
On the second hard disk, I have a functioning Fedora Core 9 installed on the first half of the disk's space (the installation is self-organized into several Linux partitions, e. g. /boot, /swap etc; I am a newbie so I don't know too much about Linux partitioning - only specified to Fedora how much space it could use for its volume group). I installed Solaris onto the second half of the second disk.
It has be noted that my USB external drive seemed to conflict with the network or graphics cards during the Fedora installation and caused it to hang sporadically, so I installed Fedora with this disk detached. I also detached it when I was installing Solaris, though it seems to have not influenced the problems I experienced. I also have attempted installing Solaris before I did so with Fedora, but had the same issues.

Well, it seems that the cause of the problem was that my DVD image was just corrupted - I didn't check it vs MD5 codes supplied by Sun assuming it went automatically OK. I downloaded the image again (this time it was OK), reinstalled the system and successfully logged into JDS. However, I am still puzzled why Solaris doesn't offer to create a default non-root user during the installation process.

Sound problems after rendering

Hi,
Being that I have Premiere Pro 7.0, I am not too sure how much help I will get, but i was hoping that someone here could still help if all possible. Here is my problem. I thought I start practicing developing video lessons for 3d software. These lessons would be created using a screen captureing program, called camStudio. In my first lesson, my first try doing the entire lesson as one video, I found out that the video file size exceeded CamStudio's exporter file size allowance when trying to save out to Microsoft DV 1 AVI file. I then decided to split the lesson into 2, but final compose it as one video in Premiere Pro 7.0. Since the lesson was broken up into 2 screen captured videos, I thought it would make things easier if each screen captured video was in its own simulation. So, in other words, I have created 2 simulations in one project, and then I had nested both of them into the 3rd simulation. For example, simulation 1 was called lesson1 part a, and simulation 2 was named lesson1 part b, and the third simulation was called lesson1. Once I had everything setup, at first everything was working fine, meaing I could see the video and hear the sound tracks. However, after I choose to render the sequence using Microsoft DV11 AVI, I do not get any sound, and yet I made sure that the exporter exports both the video and audio. Furthermore, after rendering the project, going back to Premiere Pro's project, and pressing play, I get the error.... Disk Write Error: Verify drive connection, available disk space and disk access privileges
However, when I go inside simulation 1 or simulation 2, I still hear their sound tracks. One other thing I have noticed is that I get the sound back in the project if I move the orginal simulations into a new simulation. By doing that, I am then able to recover the project,. but if I choose to render again, the same process happens all over again.
Does anyone Have any ideas?
My Specs
Adobe Premiere Pro 7.0
Windows XP SP3
CPU 3.0GHz processor
RAM 512MB

so are you saying that the problem could be comming from how I did my recording with CamStudio? Not to change the subject, but you see, I am kind of lost. My goal is to provide some free video lessons. I was thinking my final encoded videos will be in DivX or XVid. CamStudio does offer users to compress to thise types of format. Howeveer, due to owning a very cheap microphone, those kinds that sit on your desktop, is causing me to have the biggest problem, since there is a good amount of background hissing noise in my recordings. So, I have been using both CamStudio for the screen capturing and Audacity to do the voice recording. Then in Audacity, I try my best of tuning up the voice and removing the background hissing noise. Once that is finished, I then need some sort of video editing software that allows me to put the video and my voice recodring together as well as splicing areas of the lesson where I stutter or slurr my speach a bit, which can be easily fixed in Adobe Premire Pro. However, my version of Premiere does not offer XVid or DivX encoding. I was thinking of using VirtualDub, but I really do not want to have 5 programs, just so that I can fix all of my problems, not to mention I have no $$$$ left. So is there a free better way?

Audio problem after rendering!

Hi everyone! I am having a problem with sound in my project after rendering. I am using Adobe Premiere CS2 , and in Audio track 1, I have someone speaking, and in track 2 I have backround music. When I play it back in the window, together it sounds perfect. After rendering, the voice becomes very crackly and distorted. I have tried rendering just the voice without the backround music, and it sounds perfect. It seems the addition of backround music is causing the distortion to the other track. I have tried rendering the backround music seperately and adding it in, but still the problem persists. I adjust the music so that when the kids are talking, the music dips down, and when they are not, I leave it at it's normal level. HELP..I am losing my grip on this one! Thanks so much....Tammy

Tammy,
If we've dropped a bit of time for this part of the edit, you now have time for more fun aspects of it.
While I will casually monitor my Meters, I spend much more time with a good set of noise-canceling headphones, listening critically. The Meters are basically to point up potential issues. With Audio, if you have not invested in a really good set of headphones, do yourself a big favor, and sneak 'em into the budget.
Glad that you got things toned down.
Now, let's go on to Lesson 02 - The Audio Mixer. Unlike adding Keyframes to a Clip, when your cutting is done, you can apply Track Keyframes to attenuate (also Pan, etc.) you Audio Tracks to suit. One would just change the Send in that Track to Write, or Touch, and "ride the gain" with the slider, as is required. I probably do most of my Audio editing there, than addressing the individual Clips. First thing that I have done is cut back a bit on the frequency of the Track Keyframes in Edit>Preferences, as I find the default to add too many (and you can go in and adjust these by hand, if you need to "smooth" things out a bit.). One caution: do this when you are satisfied with the cuts, Clip placement, etc., as these Keyframes are applied to the Track. If you were to remove a Clip, and replace it, those Keyframes would apply to that new Clip, whether you want them to, or not. This trips some folk up, if they do the Audio Mixer thing too soon in the editing. Wait until you are "in love" with your Timeline otherwise. It's like scoring a Project. One does that as about the very last step, or much work will be repeated, and that is not fun.
Good luck,
Hunt

Picturesize problem after Rendering a timeline in Premiere Pro CS4

Hello,
I currently work with 4.1.0 and have the following problem. When I import Tif sequenze 1280x720 as film, first the film looks correct. The red line above in the timeline says that the sequence is not rendered. When I render now this timeline by pressing the Enter-key, after rendering the content looks zoomed in the preview and on an output monitor the picturesize shrink to approx. 70 %. But there is no effect on this track. This happens simply with original tif files. When I use JPEG files the problem does not exists. So I presume a problem when processing tif files. Do you know problem like this?
Thanks for an answer
André

André,
What are your Project/Sequence Presets?
Is Scale to Frame off, or on?
Good luck,
Hunt

Render problem - strange glitches after rendering in new PP 2014.1

Hi there,
I've updated my Adobe Premiere Pro CC 2014 to 2014.1 and since then all my renders have strange glitches.
Both old (converted) and new projects. It's second day I can't render any usefull file. I've deleted media cache, tried not using any plugins nor effects at all and yet, it still doesn't work properly.

I've found, that happens only when I use lumetri looks in the sequence.
Any idea how to fix this?

CS3: brightness problem after rendering

Hello everybody,
I'm using Premiere Pro CS3 and I have a problem when I use Adobe Media Encoder to render my HDV 720p project: the final result looks brighter than the original footage on the timeline.
Anybody had the same problem? Could you please help me?
ADDITIONAL INFO ABOUT MY PROJECT SETTINGS:
HDV 720p 25 fps (the footage on the timeline is mainly a MOV file exported from After Effects CS3 with the Animation Preset)
ADDITIONAL INFO ABOUT RENDER SETTINGS:
Format: MPEG2
Video Codec: MainConcept MPEG Video
Quality: 5
TV Standard: PAL
Frame Width: 1,280
Frame Height: 720
fps: 25
Field Order: None (Progressive)
Pixel Aspect Ratio: Widescreen 16:9 (1.000)
Profile: (Main)
Level: High 1440
Bitrate Encoding: VBR, 2 Pass
Minimum Bitrate [Mbps]: 4
Target Bitrate [Mbps]: 10
Maximum Bitrate [Mbps]: 18.5
GOP Settings
M frames: 3
N frames: 12
Closed GOP every: 0
Automatic GOP placement (box checked)
ADDITIONAL INFO ABOUT MY HARDWARE:
      Computer Type                                     ACPI Multiprocessor PC
      Operating System                                  Microsoft Windows XP Professional
      OS Service Pack                                   Service Pack 3
    Motherboard:
      CPU Type                                          DualCore Intel Core 2 Duo E8400, 3000 MHz (9 x 333)
      Motherboard Name                                  Asus P5KC (3 PCI, 1 PCI-E x1, 2 PCI-E x16, 4 DDR2 DIMM, 2 DDR3 DIMM, Audio, Gigabit LAN, IEEE-1394)
      Motherboard Chipset                               Intel Bearlake P35
      System Memory                                     2048 MB
      DIMM1: Kingmax KLDE88F-B8KB5                      2 GB DDR2-800 DDR2 SDRAM (5-5-5-18 @ 400 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
      BIOS Type                                         AMI (06/25/08)
      Communication Port                                Communications Port (COM1)
    Display:
      Video Adapter                                     NVIDIA GeForce 8800 GT (512 MB)
      3D Accelerator                                    nVIDIA GeForce 8800 GT
    Multimedia:
      Audio Adapter                                     Realtek ALC883 @ Intel 82801IB ICH9 - High Definition Audio Controller

I did some tests.
1. It appears the problem is not my monitor: I connected my PC to a CRT TV and also viewed the images on a Laptot and the brightness intensity is the same.
2. I tried to render from AE to a loseless file and then import the loseless file in Premiere for the final render to MPEG2 file, but the final result doesn't change.
3. I tried to use another program: Sony Vegas Pro 9.0. I imported the MOV into Vegas and started a render to MPEG2 file. The result was the same as in Premiere: too much brightness.
4. So I went on with the tests and rendered to different formats/codecs. The most decent results I obtained with Lagarith Loseless Codec in Premiere and Sony AVC in Vegas.
But still I'm not satisfied. The image is still a little too bright, which is a problem because I have some granulation issues on the original footage.
I could try to darken the image before starting to render but I would like to find a more "professional" way.
If anyone else has other suggestions they are welcome
Thank you all for the support!

Strange problem after installation of bootcamp with windows 7 on Imac i5 27

After installed Windows 7 (Single partitions Leopard Snow and Windows works very fine) i have a bootloader problem with the option key at startup of the machine.
If i hold option for a little time i don't see any icon, only a gray display. Only if I hold down the option key for about two minutes icons appears correctly.
The problem not exist if i install rEFi, bootloader, it start very fast and all work fine. Any ideas?

Hi,
This is Oracle Database Express Edition (XE) forum.
If you like use APEX listener and have problem with that here is link to correct forum.
ORDS, SODA & JSON in the Database
If you like use EPG see configuration steps from APEX install instructions
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21673/otn_install.htm#CBHBCBBJ
Regards,
Jari
My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai

HTTP Sender Adapter Strange Problem After SP16 Patch!!!

Hi,
after upgrading to XI SP 16 I'm no longer able to create HTTP Sender Adapter based Communication Channels. I can create a Receiver Adapter but no Sender since the Sender button is greyed out in the UI. Does anybody have an Idea what could be the problem here?
Kind regards,
Heiko

HI Heiko,
As stated by bhavesh you cant have a sender http adapter, infact there is no need to have it.
If you want topost message to the integration engine using http protocol,you can directly send the xml message to the pipeline url of the integration engine.
http://<host>:<Abap http port>/sap/xi/engine?type=entry
Yomesh

Weird Problem after Rendering

Okay, so my first edit was a 2 hour long video that was recorded by software from DxTory which records video games. This records in 1080 P so that's what I was hoping to get from the video. After editing, and exporting and rendering in the MPEG HDTV 1080p 29.97 which turned out to be about 12.5 GB large. Uploading this to YouTube I found that the video is only viewable in 360p not what I had expected in 1080p. Did I do something wrong while rendering, if so, what can I do to get my videos to be in 1080 p on YouTube.

CurtisC
You are going to be bound by the upload limitations of your exports. There is no way to extend the Premiere Elements 12 Publish+Share/Social Websites/YouTube limitations of file size 2.0 GB/15 minutes. However, if you take your Timeline to a file, you still have to deal with YouTube at the YouTube web sites. You can get extended limitations there that you cannot get through the within Premiere Elements upload route.
Of all the export choices from Premiere Elements, probably the smallest file size would be expected from a Publish+Share/Computer/Windows Media export (see customization under Advanced Button). But, even there a 12.5 GB seems even much for YouTube to OK. But, I do not know how far YouTube will go with these special accounts with extended limits.
Although Facebook and Vimeo do not show limitations in the Premiere Elements Social Websites feature, they appear to have them. See their web sites for further information on that.
Will decreasing the duration of your video compromise the video message that you are trying to convey with your presentation? Can you get your messages across in a series of shorter videos?
Have you looked at the Windows Media and AVCHD .mp4 choices under Publish+Share/Computer?
ATR

Strange problem after installing iTunes 8.1.1

I have two accounts on the same iMac. iTunes Music folder is in the Share Folder so both account can acccess it. After upgrading to 8.1.1 one account does not shows up the library nor the Apple TV connected. When logging in to the other account it shows the library and the Apple TV connected.
Any suggestions?

To manage permissions in windows xp professional:
http://support.microsoft.com/kb/308419
To manage permissions in xp home edition:
http://www.softwaretipsandtricks.com/windowsxp/articles/2/1/XP-Home-advanced-fil e-permissions
Xp home simply lacks a built in GUI permissions tool in regular mode, so you have to manipulate
permissions via the command line or by entering safe mode or by some third party app.
I use a free 3rd party app from Native Computer Systems called ACLView. Native Computer
Systems is defunct though so you will have to find a third party site that hosts the file.
Kj

Strange problem after updating

I used iPod Updater to install the most recent updates and then I connected my iPod mini to a wall outlet like it said to. there apple logo showed with a bar underneath, then the bar filled and disappeared. then it was just the logo, and every few minutes or so it is making a clicking noise and the logo disappears then reappears. then I tried and failed to reset it, and then after one attempt it showed a battery icon with just one segment filled in, but then that disappeared. then i pressed the select button and now the apple logo is back and its clicking again. what is wrong, and how can i fix it?

Have you tried here?
iPod only shows an Apple logo and doesn't start up.
Restoring using disk mode is often the key.
Putting iPod into disk mode.

Strange problem after share a port with My webserver and FMS

My webserver is running, and I want to use rtmpt(80 port) to player a video. So I did as same as:
http://help.adobe.com/en_US/flashmediaserver/configadmin/WS02f7d8d4857b167770a4686812a808b 6918-8000.html
If you want Flash Media Server and your web server to share a port, set up Flash Media Server as the proxy, put your web server on an unused port, and change the fms.ini HTTPPROXY_HOST setting to point to that port.
httpd.conf
Listen *:8080

Everything is ok except when a post a form.
When I submit a form, the website send me a “application/x-fcs” type empty file let me download file.

A strang problem about Resin database connection pool

I am a beginner，hope somebody can help me.
my web site occured a strange problem after I used the Resin database connection pool instead of
connecting directly
the error message as follows:java.lang.IllegalArgumentException: Request cannot be null
at javax.servlet.ServletRequestWrapper.<init>(ServletRequestWrapper.java:100)
at javax.servlet.http.HttpServletRequestWrapper.<init>(HttpServletRequestWrapper.java:92)
at com.caucho.server.connection.RequestAdapter.<init>(RequestAdapter.java:96)
at com.caucho.server.webapp.DispatchRequest.<init>(DispatchRequest.java:97)
at com.caucho.server.webapp.IncludeDispatchRequest.<init>(IncludeDispatchRequest.java:77)
at com.caucho.server.webapp.IncludeDispatchRequest.createDispatch(IncludeDispatchRequest.java:87)
at com.caucho.server.webapp.RequestDispatcherImpl.include(RequestDispatcherImpl.java:389)
at com.caucho.server.webapp.RequestDispatcherImpl.include(RequestDispatcherImpl.java:345)
at com.caucho.jsp.PageContextImpl.include(PageContextImpl.java:807)
at _jsp._intro__jsp._jspService(/intro.jsp:60)
at com.caucho.jsp.JavaPage.service(JavaPage.java:75)
at com.caucho.jsp.Page.pageservice(Page.java:571)
at com.caucho.server.dispatch.PageFilterChain.doFilter(PageFilterChain.java:155)
at com.caucho.server.cache.CacheFilterChain.doFilter(CacheFilterChain.java:211)
at com.caucho.server.webapp.WebAppFilterChain.doFilter(WebAppFilterChain.java:177)
at com.caucho.server.dispatch.ServletInvocation.service(ServletInvocation.java:221)
at com.caucho.server.http.HttpRequest.handleRequest(HttpRequest.java:263)
at com.caucho.server.port.TcpConnection.run(TcpConnection.java:331)
at com.caucho.util.ThreadPool.runTasks(ThreadPool.java:464)
at com.caucho.util.ThreadPool.run(ThreadPool.java:408)
at java.lang.Thread.run(Thread.java:595)


<resin xmlns="http://caucho.com/ns/resin"
xmlns:resin="http://caucho.com/ns/resin/core">

<log name='' level='info' path='stdout:' timestamp='[%H:%M:%S.%s] '/>
<log name='com.caucho.java' level='config' path='stdout:'
timestamp='[%H:%M:%S.%s] '/>
<log name='com.caucho.loader' level='config' path='stdout:'
timestamp='[%H:%M:%S.%s] '/>

<dependency-check-interval>2s</dependency-check-interval>

<javac compiler="internal" args=""/>



<thread-pool>

<thread-max>128</thread-max>

<spare-thread-min>25</spare-thread-min>
</thread-pool>

<min-free-memory>1M</min-free-memory>
<server>

<class-loader>
<tree-loader path="$resin-home/lib"/>
</class-loader>

<keepalive-max>500</keepalive-max>
<keepalive-timeout>120s</keepalive-timeout>

<http server-id="" host="*" port="8080"/>


<cluster>
<srun server-id="" host="127.0.0.1" port="6802" index="1"/>
</cluster>

<ignore-client-disconnect>true</ignore-client-disconnect>

<cache path="cache" memory-size="10M"/>

<ping>

</ping>

<web-app-default>

<cache-mapping url-pattern="/" expires="5s"/>
<cache-mapping url-pattern="*.gif" expires="60s"/>
<cache-mapping url-pattern="*.jpg" expires="60s"/>

<servlet servlet-name="directory"
servlet-class="com.caucho.servlets.DirectoryServlet"/>
</web-app-default>

<database>
<jndi-name>jdbc/artunion</jndi-name>
<driver type="org.gjt.mm.mysql.Driver">
<url>jdbc:mysql://localhost:3306/union</url>
<user>as</user>
<password>as</password>
</driver>
<prepared-statement-cache-size>8</prepared-statement-cache-size>
<max-connections>20</max-connections>
<max-idle-time>30s</max-idle-time>
</database>

<host-default>
<class-loader>
<compiling-loader path='webapps/WEB-INF/classes'/>
<library-loader path='webapps/WEB-INF/lib'/>
</class-loader>

<access-log path='logs/access.log'
format='%h %l %u %t "%r" %s %b "%{Referer}i" "%{User-Agent}i"'
rollover-period='1W'/>

<web-app-deploy path='webapps'/>

<ear-deploy path='deploy'>
<ear-default>

</ear-default>
</ear-deploy>

<resource-deploy path='deploy'/>

<web-app-deploy path='deploy'/>
</host-default>

<resin:import path="${resinHome}/conf/app-default.xml"/>

<host id=''>
<document-directory>D:/artunion</document-directory>

<web-app id='/'>

<class-loader>
<simple-loader path="$host-root/xsl"/>
</class-loader>
<servlet-mapping url-pattern="/servlet/*" servlet-name="invoker"/>
</web-app>
</host>
</server>
</resin>
Thank you!

Strange problem after rendering!

Similar Messages

Maybe you are looking for