Swipe movie controls?

Okay I really need some help. I am working with Air for Android (CS6) and have built out a motion comic as a movie, with stops on Key Frames. The movie is fine, but I am havng trouble with the swipe controls.
I need it to right swipe, go to next frame and play. But, on the swipe left, I need it to go to the previous frame and play in reverse (going back to the previous stop frame).
I just can't seem to get the s script right.

The move backwards thru the timeline requires continuously executing the prevFrame() method until you reach whatever frame it needs to stop at. I do not use snippets so I have no idea if that would be included... though I doubt it. To execute the command you could initiate an ENTER_FRAME event listener and use its event handler function to process the prevFrame calls...
addEventListener(Event.ENTER_FRAME, moveBack);
function moveBack(evt:Event):void {
     if(currentFrame > desiredFrameNumber){
          prevFrame();
     } else {
          removeEventListener(Event.ENTER_FRAME, moveBack);

Similar Messages

How do I move control of my ATV from one Mac to another in the same house?

I have two iMacs in the office. I have ATV2 on my flat screen TV. I want to move control of ATV from one iMac running Snow Leopard to to the other running Lion, because of more and better content. Not sure how to accomplish this. Thanks for any help you can lend.

Ok I understand that but my ATV only appears in the left control column of one iMac and not the other. Not the one I want to control it with.

Interactive movie controls

Hi,
Sorry if this a silly question or not appropriate for Premiere. I am creating a presentation for my company, a corporate looking one. I built one in Flash, which was fine, but a bit fidly, as the presentation was very long (about ten minutes) and with a huge amount of layers. I found the image quality to be poor on Flash, and as PowerPoint is out of the question I want to build it on Premiere. I have used Premiere before, not very experienced but I get by.
I dont really want to have a movie that just plays through itself with no interaction. Is there a way to add movie controls, as in the first section of the presentation will play, then stop until a button is clicked (like an interactive PDF) and if so can anyone point me in the right direction as to how to use them?
Sorry if this is obvious.
Thank you

Try the Flash forum for questions about encoding issues: http://forums.adobe.com/community/flash

Movie controls stopped working

my movie controls have stopped working
such as
the trans port controls appear when I move the mouse
using the escape key to cancel out of the movie
the ONLY way I can close a full screen movie is to click it and look for an 'x' in the upper left corner.
I am on a mbp retina runing the latest os/itunes.

I am having a similar problem with my two MacBook Pros, but only with You Tube. When I play a You Tube video on my even older Mac Pro, the volume is fine. I've researched this extensively, but will admit I'm not too good at understanding all the options in the Mac Preferences. Nevertheless, I've tried multiple suggestions to no avail. Were it not for the fact that YouTube works fine on my MacPro, I'd believe it was a You Tube problem. But I don't.
All three computers are running the same Mac OS.

In QuickTime 10 is there a way to hide the movie controls when paused?

Is there anyway to hide the movie controls in quicktime when pausing movies? It's quite irritating when trying to analyse video, especially when resolution is low, and can't move the controls out of the video window to see whole picture. There should be a way to move them outside the movie window?

Click the mouse while it is over the player window. The onscreen controls and title bar will disappear.

K3 : turning movie controls off

Seems the keynote team forgot to put a chackbox in the quicktime inspector so we can turn a particular movie's control to OFF (so this movie doesn't show controls when the mouse is mooved, while still showing them for other movies on the slide)
lots of us are using motion/livetype and so on to bring more life in our presentations, but for now, we have to stick with K2, since in K3, those elements get a controller when we don't want it.
is there a way?

A workaround is to put the motion graphics on the master - when a movie is on the master, it will play immediately when the slide comes up, but will not show the movie controls. This isn't ideal, of course, since it means creating a separate master for each slide with a background motion graphic, but it does work.
PowerMac G5 Mac OS X (10.4.4)

Play pause movie controls

I would like to create play/pause movie controls that for different flv files.
I do not want to use skins but have the controls as part of the movie/video.
Can anyone point me to a tutorial source that will help me design these?

please don't cross-post. check your duplicate thread.

"swipe moviment" between pages and articles in a folio

hello.
I'm making an app and I want to navigate through is pages and articles only using links and buttons. Is there any way to eliminate that "swipe moviment" between pages and articles in a folio?

No.
Neil

Movie control bar in iwev

I have done a spreadsheet with numerous movie clips. They all worked fine until just recently. The movie control bar will not accept inputs. It works fine in iweb. I ultimately just went to autoplay to keep the site running. There is a small down pointing triangle when the bar appears on the web.

What's the URL of your site so we can examine it first hand?
OT

Can't find airplay option in swipe up control centre after hard reset

My iPad recently updated to iOS7, Netflix is telling me to turn off airplay to watch through my HDTV. I connect via hdmi cable. I have done a hard reset and the airplay option is still not in my swipe up control centre. I don't know where else it would be. Please please help!!!!

If you don't see the AirPlay icon:
1. Turn off router, Apple TV and iPad
2. Turn on router and then wait 30 seconds for it to complete start-up process
3. Turn on Apple TV and then wait 30 seconds for it to complete start-up process
4. Turn on iPad (wait 30 seconds) and test AirPlay

QT movie controler doesn't work ...

After draging and placed a QT movie (h.264) and published my site, the movie controler doen't work ... I keep clicking on it and nothing happens .... The movie only starts if click twice over the movie and stops if I click once ....

QTKirk ..... You are the Man ! You will not believe but I had just found the solution when my mac emmited a sound "saying" that I had a new message and it was yours ! After 1 and 1/2 day trying to solve that damm issue, I though that it could be the problem. I turned on the layout view, increased the page height ... placed the movie a little bit above the footer line and VOILÁ !!! All movies played smoothly well .... lol .
Despite I had already found the solution, I said that "you are the man" because not even the Apple Guys at their "Chat Dept." could help me .... I'm an Editor, not a Web Designer and because of that I was already thinking that iWeb does not deal very well with videos edited in Final Cut Pro and encoded/compressed via Compressor..... Thanks for have spent your time answering me and keep giving good advices as you did, as someone who knows what is talking.

Ios 8, no movie control buttons

When I want to forward movie, pause or anything, there is no buttons to appear. Volume side control functions. Taping on the screen is not helping. Do not know if is related to new ios. thnx

Thank you for your response. However, the I PAD 3 Retina, has NEVER had a headphone jack inserted. I gave this to my wife some time ago, she does not use headphones! Additionally, if I swipe control center, touch Air Play, ONLY, selection available are Headphones and Apple TV. Tried, using the General Settings, to disable the mute function and enable the slider switch on the side. This resulted, in my being able to see, in Air Play the "I Pad", selection, checked this, and could hear both system click sounds as well as play audio thru, the I pad. Subsequently, the next day, it reverted back to the prior two of three options in air play. Namely, Headphones and Apple TV. To make it more confusing, I tried the same protocol, that restored the Internal Speakers previously, and when I checked "I Pad" selection, it appeared momentarily then reverted back to ONLY "Headphones" and Apple TV, which by the way, either one plays sound thru the corresponding selection. HELP......This I pad is no longer covered under Apple Care. Thank you.

Magic Mouse 1 finger swipe moves app to new desktop

My mid-2009 is running the latest ML bits and it has developed an extremely irritating behavior.
When using my Magic Mouse a 1 finger swipe across the top part of a window moves it to the next desktop. I have my settings in system prefs set to use a 3 finger swipe to change desktops. I also have turned off "Swipe between pages" in the Magic Mouse settings. Sometimes I'll move my finger on the mouse a litlle and suddenly find myself (and the window I was over) on the next desktop.
I also get this behavior on my MBP pad if I swipe 2 fingers across the top of a window. That's also a little irritating, but less disruptive to my work.
I would love to know how to disable this behavior.

I guess you have installed all available updates, including this one?
http://support.apple.com/kb/HT3936
As a test, you can create a new admin user account in System Preferences Accounts pane
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
Log out and log in to the new account. Try the mouse there. This will help narrow down the cause. If it works in the new account, the cause is probably in your normal user account. If the same problem recurs, then the cause is probably at the system level.

Quicktime Pro - missing movie controls in browser plugins

When viewing QT movies in my browsers, I have full functionality except that the control strip is replaced with a black bar. Buttons do behave (the volume slider even appears if I click where it should be) but they are not displayed.
This occurs in both Firefox 2.0.1 and IE 7. It happens with QT 7.1.3 and also happened with the previous version (7.0.2 I believe).
My OS is WinXP x64
Mac Pro 2.66 Other OS Windows XP 64bit

Well... since the generic feedback form is the only other way to post any kind of information to Apple about QuickTime (incredibly short-sided for a paid "pro" product) we'll continue to post here regardless of whether it is "supported".
Quicktime Pro is an important part of my company's pipeline... which is also dependent on Windows 64bit (32bit just doesn't cut it for highly complex, high-resolution 3D rendering). There is no alternative.

Captivate is confusing my movie controls

Hi,
I have a shell project that includes some animations
(published captivate movies with controls on). When I import that
movies as animations into my project, I can see in the library that
the controls I chose from the skin properties are correct.
When I preview or publish, I get totally different controls
I've never seen before located in a different location on the
screen. I tried add the move to an empty project and it looked
fine. I decided to recreate my shell with a new empty project, add
some movies but I still get the same results.
Do anybody have similar issues or a workaround.
Thank lisa

Hi Rick,
Oh, I hope you can help since my whole course is based on
this structure. Let's see if I can explain better. I don't know if
screen shots will help. let me know.
1)I have a project which I call my shell. It basically
contains branding, back and next navigation. This project will
becomes the a module in my course.
2) I have multiple projects that are demonstrations. They are
small enough to fit in the main shell movie.
3) The smaller projects have a few controls like rewind,
pause and back.
4) once ready i insert the small projects as animations
(published swfs with controls) into the main shell.
5) If I look at the shell library, I see my animatons with
the proper controls.
6) However, if I preview or publish I get different controls
in different locaton.
I've tested this as a simple case. I have even add blank
slides between, played with timing of animations, etc, but still
get the same results. If there are no controls in the smaller
movies, there is no problem.
1) create a new blank project
2) add 3 blank slides
3) on each slide insert an animation (captivate published
movie with controls)
4) once i preview or publish I get inconsistent results where
one has the proper controls but the others don't

Swipe movie controls?

Similar Messages

Maybe you are looking for