Taking stack tracks out of record mode, while transport moving

Is there a way to stack 10 tracks, one record button triggering them all, three other tracks out of the stack and then the record button for the stacked (one button) 10 tracks button being un-engaged, while the transport is moving leaving the other three tracks recording? All without stopping the transport?

Hi user13118647,
It looks like your application is triggering an existing Sun HotSpot VM bug from the older 1.4.2_11 JDK.
Please review the Sun bug references below.
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6405062
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6385867
The problem appears to be resolved in JDK 1.4.2_13(b01). You may want to download and attempt to replicate with this service pack upgrade.
Another potential problem I noticed is at your classpath level. It looks like you are using a mix of runtime JDK jar files from the Sun JDK and JRockit. Please ensure your JDK classpath; including any reference to any JDK related runtime jar files (tools.jar, rt.jar etc.) is consistent and unique e.g. Sun HotSpot or Oracle JRockit but not both.
## Example:
JAVA_HOME=C:\bea\jdk142_11 // JDK home is setup to the Sun JDK
CLASSPATH=C:\bea\JROCKI~1\lib\tools.jar; // tools.jar is loaded from the JRockit JDK home
Regards,
P-H
http://javaeesupportpatterns.blogspot.com/

Similar Messages

Soundtrack Pro pops out of record mode after 1 second - Help!

I have an ADR session tomorrow, so this one is pretty urgent. I have Soundtrack Pro 2.02 on my PPC G5 and I've used it to record vocal tracks for a long time, but I haven't used it a couple months. I started it tonight to do a couple test takes and hit the record button and it records for about 1 second then pops out of record mode. The playhead, however, continues to run. So it's not that it stops altogether, it just quits recording.
Nothing new in terms of hardware, same preamps, same mic. No new software that I can think of, just the standard updates. Searched the and found the same question asked a earlier this year but was never answered ( http://discussions.apple.com/thread.jspa?threadID=1382762&tstart=6 ). I hope someone knows what's going on. Thanks much.

UPDATE:
I did a complete re-install of FCS and it's working now.

Kicked out of recording mode prematurely

I am seeing a problem with Captivate 3 where clicking certain
UI controls in the app I'm recording kicks me out of recording
mode. The curious thing is it only happens on one machine. Doing
the same thing while recording on another machine works
correctly.

I was able to figure out a workaround. In Captivate, under
Recording>Settings, uncheck the option “Hide Adobe
Captivate system tray icon”. Then on your desktop, right
click on the system tray (the bottom right hand corner). Click on
Properties. Click on the notification area tab. Click customize.
Then find Captivate on the list. It most likely says “Hide
when inactive” next to it. Click on that phrase and it should
turn into a drop down menu. Choose “Hide”. I believe
you would only have to make these settings once and they will stick
until you go back and change them.

MacBook Pro comes out of sleep mode while lid is closed

Hey guys,
I have a MacBook Pro that is slightly over a year old. I'm running Leopard 10.5.5, and I have a strange problem where the computer comes out of sleep mode while the lid is still closed. This happens without any USB plugs being inserted or removed. Basically it just comes out of sleep (I can tell because I can hear the hard drive spin up as well as the noise the cd-drive makes when it's woken up), then it seems to realize that the lid is still closed and goes back to sleep. This used to happen somewhat infrequently, but I got fed up when this happened today about 10 times in a row as I was trying to study for an exam.
I have applecare so I'm not worried about having to take it in, it's just a strange, annoying problem. I have not been able to find anything from searching google or the help forums, so if anyone knows what could be causing this and how I can fix the problem it would be greatly appreciated.
Thanks
Message was edited by: SFR6

I did as you said, and I think I found the perpetrating program. It showed:
"11/28/08 11:41:24 PM [0x0-0xb90b9].com.apple.Safari[1261] Fri Nov 28 23:41:24 Macintosh-37.local Safari[1261] <Error>: Invalid JPEG file structure: SOS before SOF\n"
Any idea what this means? The only other thing that showed up as an issue was:
"11/28/08 11:42:16 PM iCal[1267] * Assertion failure in -[CoreEventResizeTracker mouseUp:sender:], /SourceCache/iCal/iCal-1270/iCal/src/calendar-views/x-days/CoreEventCreationTra cker.m:697"
or
"11/29/08 12:19:34 AM com.apple.launchd[1] (com.apple.backupd-wake[1287]) Exited with exit code: 1"
I have no idea what this means, so if anyone can shed some light on it it would be very much appreciated.

Why do I get a Track out of memory error while running open loop frequency response?

MatrixX Build 61mx1411: I get a "Track out of memory" error when I run the Open Loop Frequency Response from the MatrixX pull down tools. What can I do to prevent this? We are running on an HP B1000 with 768 MB of RAM under HP-UX 10.2.

In the old days of Mx say Version 5 and prior the user actually selected the amount of memory that would be allocated. Depending on the size of the model etc. you would have to allocate memory. In version 6.0 and going forward there is no need for the user to manually allocate the memory.
Build {rstack=50000,istack=200000,sstack=50000,cstack=500 000}
If this is a command in a script file that you are running and the error is resulting from that then I would try commenting out everything after the letter d in the word build and then starting it back up.
i.e. only use Build
I don't believe that there is a way to manually allocate the initial SystemBuild Stack size.
I believe initially the stack size is set to 10010.
However, one way
you can manually set the initial SystemBuild stack size,is to create a large StateSpace as soon as you start up SystemBuild. This will prevent piece-meal reallocs while using SystemBuild.
You can created a new SuperBlock in SystemBuild and then drop down a StateSpace Block with 199 inputs and 199 Outputs and 1 State and entered ones(200,200)as the StateSpace Matrix without any problems. This would resize this internal stack to at least 40000.
You really should not have to do this but if that helps then you might think about doing this in your startup.ms file you could use SBA or load the file then you could delete the superblock and begin working.
"Bob" gave me this little tid bit.
Please let me know if any of this is of use.
Garrett
Garrett Thurston
[email protected]
Phone: 781.993.5540

Reducing time while Filtering Out New Records with the Same Key

Hi Experts,
I have an issue .. I am trying to load data into 0MATERIAL . While loading via DTP the step u201CFilter Out New Records with the Same Keyu201D takes much time for processing . For each datapackage it is taking around 30 minutes to filter out new records with the same key . While for other master data it hardly takes 5 minutes.
Any pointers how to reduce the timeu2026
Thanks in advance
Sam

Hello,
No there is no need to do that change then.
Can you tell me are you doing a full load daily to 0MATERIAL object.
why dont you use delta.
Also if the DTP is of type FULL, then are you deleting the previous PSA requests.
Maybe you can ask the basis guys to check with a trace what is really happening on the DB side during this 30 mins and then maybe we can find the needed fix.
Regards,
Shashank

Firefox will run reasonably fast - for a while, I do have quite a few tabs open, They start out in background mode, but as soon as I access them it slows

My problem is Firefox will run reasonably fast - for a while, I do have quite a few tabs open, They start out in background mode, but as soon as I access them (to view or download from them) even if I close them as I go, FF will start to slow down and it isnt long before FF drops to a crawl sometimes taking MINUTES to answer a click on the file menu (example) no fancy benchmarks needed.
Having to restart FF and hoping your tabs come back for a temp. speedboost is NOT acceptable.
I have to restart at least 3-5x a day - anyone else think this is stupid?
I have 6 gigs ram, XP 32 only uses about 3.5 of it, 2.33ghz core duo, plenty of drive space.

I understand that after using Firefox for a while there are some issues with speed. [[Firefox is slow - How to make it faster]]

I finally got my iphone out of recovery mode, after 7.1.1 but now it won't accept my Icloud info and states "An error occrured while trying to save the Icloud account?" What do I do????

I tried updating my iphone 4 to 7.1.1 and it went straight into recovery mode.... I finally got my iphone out of recovery mode, but now it won't accept my Icloud info and states "An error occrured while trying to save the Icloud account?" What do I do????

Same situation. I installed iOS 8 beta 4 on my iPhone 5 and a few days later my iCloud account disappeared. My contacts and calendar entries are gone.
My Mac Mini and MacBook do sync as they should with iCloud.
When I try to log in to iCloud on the iPhone (the username shows "[email protected]" and password shows "required"), I put in my username and password and tap "Sign In", It says "Verifying" at the top and after a while checkmarks appear next to my username and password. Then I get an error message saying "An error occurred while trying to save the iCloud account". If I tap OK the message goes away, leaving my username and password intact (checkmarks are now gone). If I tap "Sign In" again I get a message saying " '[email protected]' is Already Added. This iCloud account has already been added to your iPhone". If I go back to Settings and then go into iCloud again it's not set up and appears as I stated at the beginning of this paragraph.
Nothing works and the sync does not occur. Contacts are empty and Calendar has no entries.

My ipod touch 5 gen still in recovery mode how can i get out in recovery mode? i update it in ios 6.2 while my itouch is in jailbrake

my ipod touch 5 gen still in recovery mode how can i get out in recovery mode? i update it in ios 6.2 while my itouch is in jailbrake

Google "DFU mode", put it in that mode and Restore it in iTunes.
And stay away from jailbreaking.

Recording Modes greyed out

All my recording modes have greyed out, as the attached screen shot, so I cannt change options.
I seem to be stuck in Demo mode.
Any ideas what I have done wrong?
Noel
England

Hi Noel
Please note that if you have an image, you may insert it inline using the little camera icon just above where you type the post.
This way we may see your image immediately and not have to wait for the forum mods to make it available in the attachments section.
So it will be helpful if you could reply and add the image that way. Perhaps then we might better help you.
Also, what version of Captivate are you using?
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Switching Tracks;Disable Record Mode

Is there a way to disable the automatic recording mode that happens when you switch tracks.When i'm cleaning up tracks and going between them with my monitors on,the red recording mode button turns on and feedback occurs when the built-in mics kick on.Thank you.

That's something for the "things I'd like to see changed" list.
It never made sense to me since it seems to me that you choose a Track for recording only once or a few times, whereas you choose it for mixing, etc. many, many times and then always have to disarm it so there are no accidents.

So far so good. But then, how do you return to the viewing mode while preserving the corrected photos. There is no way out such as a button " done " like the one present in mi iMac.

In my ipad, looking at photos with red eyes I enter edit mode, red eye tool, correct and then what? How do I return to the viewing mode while preserving the corrected photos. There is no way out such as a button " done " like the one present in my iMac. Any solution ?

In my ipad, looking at photos with red eyes I enter edit mode, red eye tool, correct and then what? How do I return to the viewing mode while preserving the corrected photos. There is no way out such as a button " done " like the one present in my iMac. Any solution ?

Dragging multiple media clips into vertically stacked tracks in the timeline? Is it possible?

Hoping that some Adobe Premiere Guru might be able to lend some insight into what seemingly should be a fairly simple thing to accomplish... but despite scouring the web, I can't seem to find a peep of a solution for it.
My neighbor (whom, incidentally, I convinced to go with Premiere CS5.5 as his NLE of choice in the wake of the FCPX uncertainty) is working on a "reality-style" project where they have a massive amount of cameras running simultaniouisly for hour upon hours on end. Think Big Brother House style.
Essentially for each hour of the footage, he is creating a project in which all the multiple camera footage (MOV) from that hour is listed/linked over in the project panel. For example, for HOUR ONE he has the footage from all 20 cameras (or whatever) for hour one listed there.
BASICALLY what he wants to be able to do is grab ALL the footage from those various cameras AT ONCE, DRAG them over to the timeline and when he drops them there, the video (and, inversely, the audio) clips STACK vertically, one on top of the other, each one taking its own track in the timeline.
Currently, of course, when he does this the footage arranges itself in the timeline end to end. In the case of my HOUR ONE, 20 CAMERA example, this basically creates a 20 hour long clip, as oppossed to a one hour clip with 20 tracks, stacked one on top of the other.
As near as we can tell, there's no keyboard shortcut to make this happen. I VAGUELY recall being able to do this in FCP (maybe?) so I'll be stunned and more than just a little bit disappointed to if there isn't SOME way to pull this off in Premeire.
Does anybody have any idea if this mode of automatically dropping clips into the timeline as stacked tracks is possible? It will, quite literally, save him hours and hours of work if he can figure out the secret. And I won't feel quite so guilty for having turned him onto Premiere for this specific project!
And if anyone knows for a fact this is NOT possible, that would be great to know as well. At least we can put the notion to bed one way or another.
Thanks in advance.
Regards, Michael

You can do this with the make multi-camera source sequence command in Premiere Pro CS6 (note that this was posted before CS6 was launched):
Mark the clips
Select the clips
Choose Clip > Create Multi-Camera Source Sequence
Choose the style of synchronization and click OK
Right click on Multi-Camera source sequence and choose > Open in Timeline.
Clips are now stacked up inside of a sequence
More here: http://helpx.adobe.com/content/help/en/premiere-pro/using/editing-multi-camera-sequences1. html#source_sequence_for_multi_camera_editing

How do I take my iPod out of "Recovery Mode" without restoring to factory settings?

(iPod 4th Gen, Windows 7)
I hadn't synced my iPod touch for a long time, because just before Christmas, my antivirus stopped working on my laptop, and I got a virus. I was unable to do anything. Because of my circumstances, I wasn't able to get my computer back to normal until just about a week ago. During the time I didn't have access to my computer, I made a lot of purchases in the iTunes app.
Now that I have access to my computer again, I tried to sync my iPod. Since it had been a while, I needed to update it. Something must have happened during the update, but I don't know what. All I know is that now my iPod will only show the "Connect to iTunes" screen (so I can't use it at all), and when I connect to iTunes, it says my iPod is in "Recovery Mode." My purchases were not synced to my computer.
iTunes says to restore it, but I don't want to do that because I would lose all of the purchases I've made since Christmas. They weren't synced, so they would be wiped if I restored it, and only what is on my laptop would be re-synced.
Bottom line: is there a way to get my iPod to work again, without restoring it to factory settings? If not, then I spent all of that money in iTunes, and now what? I'm supposed to buy it again?
Thanks for taking the time to read this; I know it's long. I just wanted to make sure all of the details were there, because I've scoured the internet, and no one has a solution for this, other than wiping the slate clean, downloading a program from who-knows-where, with who-knows-what viruses attached to it, or jailbreaking. And those are not options.

Yu can try to use this program to get the iPOd out of recovery mode.
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov
However, from what you describe, the iPod is very corrupted and a restore is required. I know of no way to get any ifno off the iPod

Does Premiere Pro support a "self-record" mode?

Does Premiere Pro support a "self-record" mode? It would record a new video with the source being what you are previewing, in terms of "animation" rather than in terms of the quality seen on screen. I often like to make humorous effects by dragging the time indicator back and forth, and have to resort to recording my own screen while in semi-fullscreen mode, then import that video and crop out the chrome. This obviously is not optimal and results in significant quality loss. Does Pr itself have such a feature built in?
I doubt it does, but it would be extremely useful.

Ditto what mark said. The intended purpose of the project manager is basically to do just as you said. It was a great solution for anyone that wanted to store the few usable minutes of their media and were confident in just discarding the rest. The problem is that, as Mark said, it doesn't handle the trimming of all common file types these days. That's because, in video, 'destructive' editing is always a matter of re-exporting edited versions and project manage simply cannot export every format to any format. The original files are never actually being trimmed down, you're just getting new versions to replace the old ones with. This represents another drawback in the form of generational loss. That's why the Project Trimmer many not be the ideal solution for you even if it is able to trim all applicable formats for you.
I tend to agree with Jim and thing that the better way to go is with Prelude. With that app, you can log what you want before hand and then capture (or, more accurately, 'Ingest') just those parts from the start. Still, it might be a good idea to save the original footage on memory card(s), hard drive(s)s (or , dare I say, tape(s_?). That way if you find out later that you didn't capture (or ingest) all of what you wanted, you can always go back and get it. Also you'll have an additional backup which could easily be re-captured from the original source if you've save the prelude project(s).

Taking stack tracks out of record mode, while transport moving

Similar Messages

Maybe you are looking for