Task Status - Provisioning

In the "User Details-->Resource Profile" window, Failed tasks are presented as "Provisioning". This is forcing you to drill down to really understand what happened to the task. Mostly we found that one (or more) of the sub-tasks has been rejected by the target system.
How can we expose the "Task Status" from the details window in the upper window?

What you are seeing is the state of the resource. Either the form was not completed properly, or the create task did not complete. Also, some of the connectors, for some reason, all the task to object status mappings for a rejected task are set to provisioning. I always change them to none. So this way you know if the resource completed it's provisioning. To manage the tasks, they should be available to your system administrators when they login to the web interface and see the open provisioning tasks link.
I think this really all comes down to unit testing to validate that the specified tasks do normally complete as intended.
-Kevin

Similar Messages

  • OIM 9.1.0.2: Remove user assigned to a task in Provisioning Process

    I have read Note: Ability to Have Multiple Approvers Per Resource Object in OIM [ID 429999.1], and executed each steps described in it. But when grant these resource object to some user. First the request was not sended directly to a approval process, as had been expected that I would. The request was send to a provisioning process, specifically to user has been assigned a task, when the user approves the request until the request is then sent to approval process.
    I need to send directly to a approval process, because that's where I have defined my levels of approval.
    I'm using oim 9.1.0.2 BP18 running on OC4J 10.1.3.5 on AIX 6.1 64-bit clustered install with two nodes, Oracle Database 10.2.0.4 on AIX 6.1 64-bit on RAC.

    Hello Everyone,
    Thanks for your response. Actually i have a Approval Process, where i have defined my levels of approvals. In Resume I have this Env. :
    1.- A Resource: ResourceA
    2.- A Provisioning Process in relation with ResourceA.
    3.- A Approval Process in relation with ResourceA.
    The request was send to a provisioning process, specifically to user has been assigned a task, when the user approves the request until the request is then sent to approval process.
    I need to send directly to a approval process, because that's where I have defined my levels of approval. In other words i need to bypass the user assigned a task in provisioning process.

  • Task status  report in cProject 3.1

    Hi,
    I want to extract task status report from cProject 3.1.
    Report should contain task name, status, start date,end date , effort etc.
    Thanks in advance
    Shiv

    Hi,
    Activate the form DPR_TASK_HIER for a particular Project type in SPRO screen. Now keep the cursor on any task in cProjects & click on Print pushbutton, this will generate a PDF Report which will contain Task name, Constraint dates, actual dates, administration details etc. In order to add more data to the Report, goto transaction SAMRTFORMS & edit the form DPR_TASK_HIER.
    Hope this will help you.
    Regards,
    Sujay G

  • Remote Software Updates and Sending Task Status to User

    I am updating user's machines using ARD 3 with the unix command 'softwareupdate -i -a'. With some updates, a restart is required and ARD posts this within the task status column.
    I was wondering if there was a way to grab that task status of "restart needed" or "succeeded" and then send that to the user when the software update has completed.
    Any help would be appreciated.
    Thanks.

    System restart checkbox is used to control what happens outside of MW.
    If you have no MW and did not select to restart outside of MW then systems will reboot after installation completes (unless user overrides it and does it sooner). Keep in mind that the 90 minute and 15 minute restart countdowns will be displayed if user is
    logged in (unless you have changed the times) if user did not interact with any notifications to select other options like install and reboot ahead of time.
    If you have MW and did not select to restart outside of MW, then PC will not reboot until MW starts (unless user overrides it, of course).
    If you select to reboot outside of MW checkbox then PC will reboot after installation ends, no matter if MW is set or not.

  • What are the attributes available on Task Status Notification?

    Hi,
    I need to send the information below when a task is completed or rejected. So I would like to know if they are available. I think so because I've got them from Task Status Notification (OIM standard email definition). If not, what are the attributes available on Task Notification?
    <Tasks.Task Name> is <Task Details.Status>.
    <Task Details.Status>
    <Resource.Resource Name>
    Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
    Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
    Response Code : <Responses.Response>
    Response Description : <Responses.Description>
    Error Details : <Task Details.Reason>
    Thanks,
    Renato.
    Hi,
    I have implemented some java code to workaround the problem below... But I don't believe this does'n work in OIM :-):-):-):-) Please, tell me if you are using task status notification in OIM and if your email defintion has the variables below.
    Thanks,
    Hi,
    One of OIM email templates is Task Status Email Notification. I am trying to notify the user (Notification tab) using this template but it didn't work. Even when I set the Object Name and Process Name values for an email definition, it does not work.
    How have you implemented task status notification in your workflows? I think if this template exists in OIM, by default, so it is posible to have the information below during notifications.
    I think I'll have to call Oracle's Support.
    =======================================================
    Subject: Process task <Tasks.Task Name> is <Task Details.Status>.
    Body:
    The Process task <Tasks.Task Name> is <Task Details.Status>.
    The details of this process task are as follows:
    Process Task Name: <Tasks.Task Name>
    Process Task Status: <Task Details.Status>
    Resource Name: <Resource.Resource Name>
    Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
    Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
    Response Code : <Responses.Response>
    Response Description : <Responses.Description>
    Error Details : <Task Details.Reason>
    =======================================================
    As I've said, the e-mail was sent but in blank:
    The Process task is .
    The details of this process task are as follows:
    Process Task Name:
    Process Task Status:
    Resource Name:
    Target User: []
    Assigned to: []
    Response Code :
    Response Description :
    Error Details :
    Is it possible to have those fields available on notifications?
    Thanks,
    Edited by: Renato.Guimaraes on 23/10/2009 08:05
    Edited by: Renato.Guimaraes on 24/10/2009 15:57
    Edited by: Renato.Guimaraes on 26/10/2009 13:31
    I didn't get any answer until now.. Below it is what I've done.
    a) Create an entity adapter that is assigned to the post-update of the Specific Task Info data object.
    b) Select the task information searching by SCH_KEY, for example (I have to do more tests)
    SELECT
    sch.sch_key, sch.sch_status, sch.sch_note, mil.mil_key, rsc.rsc_data, rsc.rsc_desc
    FROM
    osi, sch, mil, rsc
    WHERE
    mil.mil_key = osi.mil_key and
    osi.sch_key = sch.sch_key and
    sch.sch_key = ? and
    rsc.rsc_key = osi.rsc_key
    c) Load the e-mail definition template and replaces the fields
    d) Sends the e-mail
    With that I solved another problem: I have to send an e-mail always the assignee adds a note to the task.
    Edited by: Renato.Guimaraes on 28/10/2009 08:51. How I did that
    Edited by: Renato.Guimaraes on 12/11/2009 12:19
    Edited by: Renato.Guimaraes on 13/11/2009 07:22 Changed the Thread Subject

    Hi Experts,
    I want to extend my doubt a little more.
    I have a requirment  as below.
    User will enter a range of Date say 01.06.2011 to 25.06.2011.
    I need to show him data in two columns one cloumn for the entered day range and second column for prevoius month date rangei.e(01.05.2011 to 25.05.2011)
    can i achive this without  using Customer Exit.
    Regards
    Laxman

  • Task status is not changed in UWL

    Task status is not changing when it is executed in UWL. the tasks comes from R/3 when a workflow is executed . SAP says realtime refresh not supportinng in current version of UWL. please let me know any workaround to solve this issue.
    Thanks ,
    Sarath

    Hi,
    Unfortuntely, there does not seem to be a 'working' workaround for the issue.
    This is resolved however in SAP Netweaver 7.0 EhP2 or 7.20 versions.
    Please see /thread/1564782 [original link is broken]
    Regards,
    Srikishan

  • Task status not changing in UWL

    Task status is not changed in UWL when the task is executed from UWL . workitems transfered from R/3 by executing a workflow .SAP says real time refresh not supports in this UWL version.
    please let me know any workaround to solve this issue.
    Thanks
    Sarath

    thats right.
    UWL does not refresh immediately. You need to refresh the UWL again.
    As I saw over internet, the Real-time Refresh feature for Universal Worklist is available in SAP NetWeaver 702 SP02 and above, and SAP NetWeaver CE 7.20 SP01 and above.
    Thanks
    Krishna

  • Sort by Task Status doesn't stay sorted?

    A useful feature is to sort computer lists by task status.... at least it would be a useful feature if it worked, but I find that it 'deorganizes' itself after a second. Oops!
    Does anyone have a solution or should i just pray the bug gets fixed some day? (as usual...)

    I was waiting until this evening to see if restarting the server would fix this.
    And it has.
    All the tasks work perfectly - those failing with both the error codes, so that's my own apps and also the SyncBackup tasks.
    For now...
    Digging around some more, I'm led to believe this might have something to do with "Desktop Heap" size.
    http://blogs.msdn.com/b/ntdebugging/archive/2007/01/04/desktop-heap-overview.aspx
    Thing is, this never used to happen up until very recently on one of my servers, I migrated to a new one (not because of this) mystified by the problem and hoping the problem would vanish. And it did, at first.
    One other server I have which runs SyncBackup tasks doesn't have this issue.
    All Windows Server 2008 R2 and all up to date with hotfixes.
    I'm reluctant to modify the Desktop Heap size without a more detailed understanding and still mystified as to why this all worked perfectly until about three weeks ago.

  • XPath expression of task status

    Hi,
    Does anyone know what is the XPath expression for human task status? I need to put a condition that if a task is still assigned, do something in while loop..
    Thanks.

    Hi,
    That should be it:
    bpws:getVariableData('yourVar','payload','/task:task/task:systemAttributes/task:state')
    Arik

  • Changing task status in code

    Hi Experts,
    I saw in a thread that different functions were advised to be used whenever changing WBS status programmatically:
    System status change of WBS element
    I was wondering if a similar list also exists for task status. I need functions that perform the same checks when changing status than the standard for:
    releasing tasks
    confirming partially / completely tasks
    teco tasks
    Thanks in advance
    Kind regards,
    Neil

    Not aware regardging Program availability. But the same if you are amuaaly able to set up and to avoid ling time in data upload / Migration.. You can develop BDC and use the same for the changing status of task. I believe  by task, you  are referrring  network activity.
    Regards
    Nitin P.

  • Issue In Task List, When I select any SP13 task item its updating task status to "Completed" automatically

    Hi Guys,
    A strange issue I am facing in SharePoint 2013 task list. When I just select any task its updated the task status automatically to "Completed". When I unselect task its updated task status to "Not Started" automatically. I don't know
    why its happening.

    Hi,
    It is by design in SharePoint 2013, you can quickly mark tasks as complete by clicking the checkbox.
    If you want to select the item, please check the “select” column.
    Select Items:
    Mark task complete: 
    More information:
    http://blogs.office.com/2012/08/13/managing-tasks-in-sharepoint/
    Best Regards
    Dennis Guo
    TechNet Community Support

  • DELETE TASK STATUS in TABLE

    Hi Gurus,
                  If I delete notification task those tasks status is not showing delete status in jest table.Due to thiswhen we want to execut the transaction( client Development) for all notification having open task then these delete notification tasks appears in the report.
    My reqirement is that when a notification task gets deleted where i get the delete status for task.
    Please help
    Regards
    Anil Kumar

    Hi,
    If you don't want to diplay the notificaitons for which the tasks have been set for deletion here is the procedure to follow.
    1. Create a status profile with the status DLFL.
    2. Create a selection profile and assign the above status profile with the status DLFL as NOT.
    3. While running the transaction QM13 run with the above seleciton profile. This will select all the notifications except the notificaitons for which the tasks have been deleted.
    Hope this  helps.
    Prakash Dhabadi

  • Task status: Not Authorized

    Hello:
    I just upgraded from ARD2 to ARD3 and am no longer able to generate reports. Whenever I try, the Task Status column reads; Not Authorized (with a red exclaimation point). I am able to observe and control computers, but cannot generate reports, which I had been able to do in version 2. Thanks for any help with this.

    Hi,
    I have the same problem here, where some clients are able to be reported and other not ("! Not Authorized" immediately after starting the report).
    I have just find a (curious) workaround:
    1. Select the client(s), go to Report > User history, select "Rebuild data for report" and press "Generate Report". You will obtain as result a "! Couldn't collect report data" error.
    2. Select the client(s) and go to Report > Administration Settings... Check all fileds to be included in report an press "Get Report". For me all fields are "on" expected "Collect Application Usage Data" and "Collect User Accounting".
    3. Try to report again. For me it works. I have tried to report "Software Version..." what failed on 8 for 13 computers (all running 10.4.5) and after this trick it works fine.
    Regards,
    Yann

  • Task Status not Showing Cost Budget

    Dear All..
    Cost Budget is baselined... but in Project Status Inquiry Screen its not showing... When i click Task Status on PSI screen.
    I have run Update and REfresh Project Summary....
    What could be the reason.. Please help...
    Many thanx.

    Hi
    check the PA periods and current reporting period.
    Regrads

  • Task Status in PM/CS Notification

    Need to get Task Status in PM/CS Notification.Is there any FM or table for reading the task status?
    Tcode IW52, in Tasks Tab, need to know for  'STATUS'. ....not User Status

    aufk-aufnr = notif / cs order number
    aufk-objnr = jest-objnr 
    jest-stat is your status... if you need test for this status TJ02-istat = jest-stat  ,  TJ02 - text30 is the text of the status.

Maybe you are looking for

  • Jabber for Windows 9.2.5 Local Contacts

    Hi Guys,      By default, Jabber for Windows 9.2.5, when searching for contacts, it first lists the local Outlook contacts, and then it shows the list of Corportate Directory Contacts.      Is there a way to show only LDAP contacts?? I don't want the

  • Which table is used in er1 cenvat credit taken and utilized report?

    hii guru i have want to know about where is store the value of opening balance's ecs value in details of cenvat credit taken and utilized report of er1? give me briefly description of er1 cenvet credit updation cycle..

  • Popup with userid and password

    Running FP_TEST_00 results in a popup asking for userid and password. Trying to activate a form results in the same symptom. Testing the connection with SM59 ends successful. We are using the ABAP stack. The system user ADSUser is created. Any sugges

  • Even 1.01 skips songs and freezes / stops videos

    I bought my red 3G Nano on september 17th directly at apple store and updated the firmware to 1.01 soon as it arrived. But even wth the updated firmware my iPod randomly skips songs while playing. Some videos are freezing (randomly) or the iPod displ

  • Error 3,,,what is it

    hi guys brand new to the site,,im tryin to install software onto my daughters ipod as her last one broke,,,but i cannot install quicktime onto my pc as it already seems to be on it,,yeah i know but hang on,,i dont think its properly installed as it w