TC running on g network instead of n?

Below is pasted my readings from the system profiler, Network, airport
This is from my MacBook 13" 2GHz Intel Core Duo. what am I doing wrong that both my Mac and TC are reading the much slower a,b,g instead of n?
Interfaces:
en1:
Card Type: AirPort Extreme (0x168C, 0x86)
Firmware Version: Atheros 5424: 2.0.19.10
Locale: FCC
Country Code: US
Supported PHY Modes: 802.11 a/b/g
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
Status: Connected
Current Network Information:
62JACS:
PHY Mode: 802.11g
BSSID: 0:1f:5b:87:5:53
Channel: 1
Network Type: Infrastructure
Security: WPA2 Personal
Signal / Noise: -56 dBm / -96 dBm
Transmit Rate: 54

Ok so I'm back up and running. radio mode is 802.11n(802.11b/g comp) channel is auto, WPA2 personal. my transmit rate on my MacBook is 54, the same as on my 5 year old PowerBook G4. When I select 802.11n (802.11a comp) transmit rate 48 on MacBook and my PowerBook obviously does not find the network. my guess is either I'm stuck with my original settings or once again I"m missing a step somewhere. My guess is that my MacBook does not operate on the N network.
A side note, after getting my MacBook back from apple today after they replaced my top case and keyboard I keep getting this annoying window that pops up and won't go away despite hitting the OK button. "Network Connection" with the purple circle with phone jack in ctr. says " your connection failed because the communication device is unavailable. Make sure it's connected to the your computer and try reconnecting"
this window keeps popping up regardless of the fact that I'm on my network and all is well. Does this have to do with the modem or some other start up item? bizzare.

Similar Messages

  • How can I get Firefox to run on a network with multiple users logging on with the same user name and password?

    I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

    I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

  • Trying to configure Portal to run off the network

    Hi all,
    I am trying to configure Oracle Portal 3.0.9.8.2 to run off the network. I have taken all of the recommended steps in terms of configuring hostname, using a static IP, running and checking the ssoodatan script, updating the hosts file, and configuring a loopback adapter, but can still not make it work. The Portal works and functions fine when connected to the network, but as soon as disconnected from the network Portal returns
    Error: Timeout occurred whilst retrieving page meta data 0 ms.
    or
    Sometimes it will display the banner, but the Portlets and the Providers will instantly timeout. I have cranked up the timeout levels of JServ and the Providers but to no avail. I have put the recommended timeout, stall, requesttime, buffer, minStall, minTimeout in the zone.properties file, but no luck.
    I have noticed within the jserv.log the error message below. The link that jumps out at me is UnknownHostException: www-proxy.us.oracle.com. I did have my proxy server set at one time, but I erased it from the global settings page, and I ran the procedure I found somewhere on this discussion board to make sure it was set back to null. When I run the diag.cmd program it shows my proxy server being empty. Where could this be picking this up from, I also have proxy servers turned off in my browsers. Any suggestions or help??
    13/02/2002 16:04:08:752 PST] page/JNI: Exception when trying to connect in 1.
    [13/02/2002 16:04:08:752 PST] page/Timeout occurred, label=147 url=http://jstrada-lap.us.oracle.com/pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet time=10ms
    [13/02/2002 16:04:08:762 PST] page/ContentFetcher Unexpected Exception, name=content-fetcher0
    java.net.UnknownHostException: www-proxy.us.oracle.com
         at java.net.InetAddress.getAllByName0(InetAddress.java:575)
         at java.net.InetAddress.getAllByName0(InetAddress.java:544)
         at java.net.InetAddress.getAllByName(InetAddress.java:537)
         at HTTPClient.HTTPConnection$EstablishConnection.run(HTTPConnection.java, Compiled Code)

    I think you must add an entry to your /etc/hosts file, as follows:
    127.0.0.1 noa noa
    and create a vhost entry on /etc/httpd/conf/extra/httpd-vhosts
    <VirtualHost *:80>
    ServerName noa
    DocumentRoot "/srv/http/"
    <Directory "/src/http/">
    Options Indexes FollowSymLinks
    AllowOverride None
    Require all granted
    </Directory>
    </VirtualHost>
    Although I'm not sure if the vhost is actually necesary, but it won't harm.
    pd: if you use vhosts, remember to uncomment "Include conf/extra/httpd-vhosts.conf" con /etc/httpd/conf/httpd.conf and restart apache
    # systemctl restart httpd

  • For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent  problems when logging into some  websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop compuHelp

    For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent  problems when logging into some  websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop computer. The wifi unit is  a iinet BOB 2 unit. The other computer works completely fine. The only problem is with this apple iPad? I have rebooted iPad and rebooted BOB 2 wifi unit but this has made on difference to the problem?
    Can anyone suggest any HELP
    Thank You

    For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent  problems when logging into some  websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop computer. The wifi unit is  a iinet BOB 2 unit. The other computer works completely fine. The only problem is with this apple iPad? I have rebooted iPad and rebooted BOB 2 wifi unit but this has made on difference to the problem?
    Can anyone suggest any HELP
    Thank You

  • HT1926 I have a French computer running on 32 bits instead of 64 (Vista). Reinstalled several times iTunes but keep on having failure 42110!! No download available for 32 bits????

    I have a French computer running on 32 bits instead of 64 (Vista).
    Reinstalled several times the latest iTunes but keep on having failure 42110!!
    No download available for 32 bits???? This is more an Apple support question!!

    Try this user tip:
    https://discussions.apple.com/docs/DOC-4831
    Hope that helps.
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • Nothing is going from my external hardrive into my trash (run on a network)

    Hello
    We use one external hardrive between four of us in our studio, run on a network. I am trying to delete stuff from the hardrive, but anything I put in the trash is not appearing there. Some of the time it says its because the file is in use - which it is not, and other times the file seems to be dropped in the trash no problem (and I get the deletion warning box), but when I go to empty, nothing is there. I've restarted my machine twice, and some of the files have appeared back to where they originally were, and others have disappeared, and aren't being found in spotlight.
    Items from my desktop are going in fine, but I can't really transfer stuff from hardrive to desktop to trash, mainly because I finish in half an hour and take my laptop with me, and it will still be transferring by then!
    Any help greatly appreciated! Thanks

    Did you put the library on the external drive, or just the media folder. See this migrate iTunes library post for the way this ought to be done and recovery tips for when it is no longer possible.
    tt2

  • HT1689 I want to close apps running in back ground but after double clicking I dont get apps running in back ground instead photo apps open after double clicking home screen

    I want to close apps running in back ground but after double clicking I dont get apps running in back ground instead photo apps open after double clicking home screen Please help.

    iPhone 3G does not support multitasking

  • IPhone 5s showing extended network instead of Verizon.

    Every since I did the update on my iPhone 5s my phone has been showing extended network instead of Verizon. After reading the post, I find I'm not the only one with this problem. After almost 3 weeks with Verizon support, Apple support, trouble tickets, resetting, restoring, reinstalling, something called reprovision, a new phone and 2 new sim cards, I finally got an answer to the problem. Since I have Verizon service with an Alltel plan the update will not work. Verizon and Apple are aware of the problem but the do not like to admit it. The only solution I was offered was to change my plan to a Verizon one which would be a lot more money for a lot less service, or they would have the local store loan me a different type of smart phone ( Droid or whatever they had available) for me to use till Apple does another update with a fix. I'm not really happy with any of the options Verizon is giving me. If they can not provide me with acceptable service I think they should be the ones making the concessions, not the customers who are not getting what we are paying for. Verizon needs to come up with an acceptable plan to replace the Alltel plans.

    Alltel had a smartpack plan which included unlimited data. So I imagine he's on that. Vzw of course is in it BIGTIME for the $ hence they'll need to phase out those plans by any means. Making things difficult with extended areas etc. They already made alltel phones unusable years ago

  • I made a pre-booking for ipad2 wifi cellular, i would like to know whether i can upgrade it to IOS6 n IOS7? and i want to know whether can i use 2G network instead of 3G as the 3G network plan is expensive??? and i want to know whether i can access siri ?

    i made a pre-booking for ipad2 wifi cellular, i would like to know whether i can upgrade it to IOS6 n IOS7? and i want to know whether can i use 2G network instead of 3G as the 3G network plan is expensive??? and i want to know whether i can access siri ?

    Siri does Not work on the iPad 2.  iOS 7 is not even out yet, so we have no way of knowing if you'll be able to upgrade to it.

  • Security restrictions? for xml/jpg running on a network

    Hi This is my first post! And hoped someone could help in any way... I have a main Flash file I'm publishing as both a swf (FP9 AS2) and exe. This file brings in data from external xml and jpg files. It initially creates a menu from an xml file and brings in jpg images for each of the menu items. Then when you click on one of these menu items, another specific xml file is loaded depending on what you press. When running either the swf or exe on my local machine (C: drive) it all works great. But when running off a network, the first xml file and jpgs are loaded (thus creating the dynamic menu) but when i click an item the corresponding xml file fails to load. If I throw the swf (from the network) into a browser, all works as it should. It's just when running the swf with the standalone Flash Player or using a projector file that it fails. Odd as it does initially load an xml file and jpegs, but then 'stops' working. Also if I run it off the network within the authoring environment, it works fine. I've tried setting the Global Security Settings to trust the network location but still no joy. I've also tried changing the local playback security options in publish settings but still can't get it to work. Is it a sandbox issue? Do I need a FlashPlayerTrust configuration file? Thanks, Mark

    I'm having the same problem. I was working with copies of a file all morning. Opened up another file, then reopened the first file and got the "No Effects#01.aif" missing message. I hadn't even touched the unedited original file and it is missing from there. I used Data Rescue II but it could not find it either!
    Does anyone know what is happening? I have lost several days of sound editing for five different podcasts because that original recording file cannot be found.

  • Want to get all the services running in the network

    I wish to get the details of all the services running in a Lan.
    I wish to get them through JSP headers. How to make it possible?
    From the server, just by running one JSP programme, i have to
    get all the details of all the services running in that network.
    Please help me to work it out.
    Thanking You.
    Faithfully
    Sathish Prabu C.K.

    hai if u got then please mail me immediately!
    bye,
    mega.

  • Can you get an iPod 5 running ios6.1.3 instead of ios7

    Can you get an iPod 5 running ios6.1.3 instead of ios7

    Yh all of the above is true, you cant go from ios 7 back down to ios 6 sorry unless you were to buy an ipod touch that was made whilst ios 6 was in use of were to get ipod touch 4g (like i am) that only goes up to ios 6...
    Know everyone else helped but i was bored so i hoped i helped a little even though i basically repeated

  • Officejet 5610 - can I connect it with the usb to a router home network, instead to connect to the c

    Hi, Is it possible to connect Offcejet5610 with usb to a router home network, instead to a computer?

    Yes, if the router supports USB printers (not just hard drives).  Also, the only function that will be supported will be printing, nothing else.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • My E72 is asking me to select WLAN network instead...

    while setting up a new email mail box (gmail)
    my E72 keep asking me to select WLAN network instead of using my regular at&t internet acces.
    Wlan is set to <never>   in the connection setup..
    is any one know what is happening ?
    it used to connect with my AT&T internet acces while setting up emails mail box.
    it works fine when i go online...but not while i am setting up mail box
    thank you.

    GOTO "destinations" in settings if you have that.
    and change AT&T to the number 1.
    for your email app, you have to configure the access point to be used manually. if its anything like mine,
    you open the email app,
    goto setting,
    select the specific email,
    mailbox setting,
    goto advanced mailbox settings
    change access point for incoming emails settings and outgoing emails setting to AT&T.
    cheers

  • Determine if NIC can run on Gigabit network

    I have a bunch of Solaris servers that will be moved to a gigabit network connection. How do I view the network settings on the network cards and determine if they can run on gigabit network? What commands I can use? This will help me if my group has to purchase new network cards. Thanks for you help.

    You can also trawl the Sunsolve support web site for Infodocs,
    and spend time at Docs.Sun.Com and the Sun System Handbook, as well.
    Generally, you just need to "know" your hardware.
    Your newer systems will likely have a gigabit interface inside,
    while the older systems will only have 10/100 chipsets for connectivity.
    Your bge interfaces tell me those are newer systems,
    with a Broadcom Gigabit Ethernet chipset.
    hme is a 10/100 chipset that was widely use in a previous generation
    of Sun's SPARC-based systems. ( Highspeed Media Ethernet )

Maybe you are looking for