Testrun error in posting depreciation run (AFAB)

Dear All,
I got  testrun error when I posting depreciation run (AFAB) so I have checked  acc.dep as technical massage everything look find. I think it need more config in somewhere. Anyone please suggest me how to fix this.
Account 'Acc.dep. accnt.for ordinary depreciation' could not be found.
     Message no. AU133
Diagnosis
     When creating the accounting document, the system could not find account
     'Acc.dep. accnt.for ordinary depreciation' for company code CC00.
Procedure
     Enter this account in the account determination for Asset Accounting.
Thank you so much in advance.
Best Regards,
Utarat.P

Hi Utarat,
additionally usefull information in the following link:
Error AU133 Account 'Contra account: Acquisition value' could not be found
Regards Bernhard

Similar Messages

  • Unable to post depreciation run - AFAB

    Dear All,
    I have a AUC with capitalisation date 16.06.2011. On 4.02.2011, I have wrongly depreciated the AUC. On realising my mistake, I changed the Depreciation key to 'MANU' from '0000' and posted a transaction with Transaction Type '640 - Unplanned depreciation on prior-year acquisitions. Now when I try to execute the depreciation run for period 1 - 2012, which was terminated, I am still getting the error - 'Account 'Accumulated dep. account unpl. deprec.' could not be found for area 01'.
    Diagnosis
    When creating the accounting document, the system could not find account 'Accumulated dep. account unpl. deprec.' in depreciation area 01 for company code XXXX.
    Procedure
    Enter this account in the account determination for Asset Accounting.
    Since this is an AUC account, account determination to a GL is not appropiate.
    Kindly suggest how to proceed, as I am unable to complete my depreciation run.
    Thanks
    Rosalyn

    Hello Konnipati,
    Issue is not yet resolved.
    The details of the issue are as follows:
    1) The user has changed the depreciation key from '0000 to 'MANU' in
    one of the AUC and posted unplanned dep. in ABSO transaction.
    2) The dep.run was executed for the month end close on the same day.
    3) The dep run got terminated with the error
    message: 'Account 'Accumulated dep. account unpl. deprec.' could not be
    found for area 01' Message no. AU133.
    4) The user realised the mistake and reversed the unplanned
    depreciation document immediately.
    5) Then they tried to execute the 'RESTART' dep. run. But the system is
    still showing the same error message.
    6) We changed the dep.key from 'MANU' to '0000' in AUC master.
    We replicated this scenario in Quality. We tried to resolve the error
    by transfering the AUC to new AUC in the same Asset Class.
    The values of the AUC got posted to the new AUC without any
    depreciation and the old AUC got deactivated.
    We then executed the RESTART depreciation run, but we still get the
    same error.
    6) Since this is a AUC, we cannot assign any GL accounts.
    Please let us know your suggestions to resolve the error message in the
    depreciation run.
    Thanx
    Rosalyn

  • Posting depreciation run (AFAB) for profit center

    I have 3 plants and each plant is created as separate profit center.
    All plants want to run and post depreciation independently. So i wanted to know if AFAB (depreciation posting) can be executed profit center-wise.
    Please advice

    There are no SAP notes.
    Because we are looking something beyond the original design of the system.
    You can post the depreciation per company code, but not for profit center. In AFAB, you cannot get profit center selection screen.
    As a statistical object, finally your profit center gets the postings, which you can view them in the report.
    But, if you want to run AFAB based on profit center selection criteria, then, it is NOT possible. There is NO SAP notes for that.

  • Executing the Depreciation Run - AFAB

    Hi, Gurus
    For reasons of adjustments to the law 11 648( Brasil) was not executed the drepeciaton run since January.
    Is trere any problema to Executing the Depreciation Run (AFAB) month by month in the past or I can execute all periods  at once ?
    the client need a to be sure about what is better to do or what is correct. 
    since now > Thanks a lot !!!!!!!!

    You have to do it month by month...

  • Park and Post for Depreciation Run - AFAB

    Hello Experts,
    We have around 15,000 assets in our company code. We have requirement that, asset management team will check the depreciation and execute the depreciation for all 15000 depreciation. However at this time, FI postings should not be available.
    Later the finance team will re-check the depreciation on test check basis and post it to FI. Trial balance will be updated.
    In short, I require park and post for depreciation run in SAP.

    Hi Meena,
    You can verify planned depreciation in Asset report S_ALR_87011990 and do not tick depreciation posted check box and give report date as the last date of the month you want to verify.
    It will give depreciation planned details up to the month in the field dep for the year.
    After verifying this you can run AFAB then check the same T code and this time tick depreciation posted check box. Now it will give you depreciation posted.
    There is no parking concept in Asset module.
    Hope it solves.
    Regards,
    GSR

  • How to revrse the documnt posted through the Depreciation run AFAB

    Hi,
    Please advise, how to revrse the documnt posted through the Depreciation posting using tcode AFAB.
    Thanks & Regards
    Jai

    Hi JayChandra
    Hope I gave my reply vide your earlier todays thread  Re: How to reverse the document posted through AFAB(Depreciation run)
    Please check  The answer is
    You can not reverse
    Make your correct changes in Asset Master/Depreciation data  and rerun AFAB
    System posts the difference

  • Problem in depreciation run -AFAB

    Hi,
    I hv uploaded asset balances as on 31.03.07 (FY2006) and closed the period . Subsequently, while trying to execute depreciation run in 2007 (period 1) system is giving error " year 2006 is not closed"
    while trying to run afab for period 12 in 2006 msg being thrown is " yr 2006 is closed".
    Can anyone give solution to this.
    we r i ECC 5.0 , but hv not activated document splitting.
    thanks in advance
    saibal

    Hi,
    Pls goto OB52 and open the previous period. then try dep run.
    after dep run again change period close back to normal.
    during this period change do not post any finacncial entries.
    Thanks

  • Error in Executing depreciation run

    Hi,
    After creating an asset in Jan'08, I am executing the depreciation run for Jan month as repeat run. But system is showing an error "Not all the documents in the last posting run were posted" Please advise what should I need to do to resolve this error.
    Regards,
    Parul

    hello
    This could be a fiscal year closing error message.
    check this and assign ponts if useful
    Fiscal Year Change
    Purpose
    From the point of view of the system, a fiscal year change is the opening of a new fiscal year for a company code. At the fiscal year change, the asset values from the previous fiscal year are carried forward cumulatively into the new fiscal year. Once the fiscal year change takes place, you can post to assets using value dates in the new fiscal year. At the same time, you can continue to post in the previous fiscal year. You find the fiscal year change program under Periodic processing.
    Process flow
    The fiscal year change can only be carried out (even in test mode) for the new fiscal year. The earliest that you can carry out a fiscal year change is in the last month of the old fiscal year. You can choose any point in the new fiscal year for carrying out the fiscal year change. Before you can change to fiscal year YYYY, you must have already closed fiscal year YYYY - 2 (refer to Year-End Closing). You can have a maximum of two fiscal years open for posting at one time.
    No business transactions can be posted in a new fiscal year before the fiscal year change. You can continue to post in the old fiscal year, even after the fiscal year change. The system automatically corrects any values that are affected by postings in the past.
    Background Processing
    The fiscal year change has to be carried out as background processing for performance reasons. Therefore, start the report as a background job (in the selection screen of the report: Program ® Exec. in background). You can carry out test runs with fewer than 1000 assets in the foreground.
    Error Log
    The system carries out the fiscal year change for all assets, even if the assets have errors. The system provides statistics per company code for the assets that have been changed.
    The system writes assets with errors to an error log and to a worklist (refer to Tools). You can access a long text for the error messages that appear (Long text).
    In the case of program termination, you can repeat the fiscal year change as often as required.
    You close the fiscal year for bookkeeping using the year-end closing program. After you run the year-end closing program, it is no longer possible to post in the closed fiscal year (refer to Carrying Out Year-End Closing).

  • Error in the depreciation Run

    dear all
    i have around 9500 assets in my asset master, when i run the depreciation at the final point it stops giving the error Error(). how can i correct how can i find the actual error??
    Thanks & Regards
    Kanishka

    Dear Kanishka,
    There exist several possibilities which will lead to Depreciation Run failure. Please kindly check whether
    the following senarios is the case in your situation:
    - Please make sure that Depr. area 100 (Book Depreciation) is active
       for to all asset classes. This is important.
    - Another reason caused the depreciation run failed
      is that an Asset Class is missing in the OITM table, but it still
      exists in the Fixed Assets table[@ba_cclsdpa].To find such cases,
      please refer to note :1236895
    - Please refer to note 1023366.
    how to set log level to 6
    1. Choose "Start->Run", enter "regedit", and press Ok.
    2. In the "Registry Editor" open the path
    "HKEY_CURRENT_USER\Software\SAP\SAP Manage\SAP Business One\AddOn"
    3. Double click on LogginLevel.
    4. In "Value data" enter the value 6 and click "OK".
    how to get log file.
    Go to 'start', then Run..., and in the browser type: %temp%
    You will see a folder 'SAP Business One Log' in it a text file
    First, delete  the original log files and start addon.
    After error occurs, please save log file on that time before doing
    anything like continuing the addon process.
    In case the issue is not resolved and you get the log file, please create the
    message for SAP support on channel partner portal and send us the log file.
    Regards
    Vikas Rastogi

  • Error in Depreciation Run - AFAB

    Hi All,
    When i run the depreciation posting(AFAB), except one document others got posted.The error document says that it cant be posted as it is blocked by other user.
    Depreciation documents are generated automatically by the system during the batch processing and how can it be blocked?
    Plz help me out in this .
    Thank You
    Regards
    Andrew

    Hi,
    To check which master data is blocked go to the session of AFAB and select the programme and go to the Job Log button in SM37 transaction code which will give the list of the error and who has blocked it.
    Hope this helps,
    Thanks and Regards,
    Gokul.

  • Depreciation Run Error Message Error 0()

    We imported Fixed Assets at a client using the importation utility in the FA module. Then we are trying to do the Depreciation Run for the first time and we are getting the following error message "The depreciation run 100000010 failed and has been cancelled. Error 0()".
    May anyone help on how to solve the error.
    Edited by: Tendayi Chidawanyika on Jan 29, 2009 3:11 PM

    Have you changed the status of the module from Transfer to Production in the Administration > Company details?

  • Not able to post depreciation in the new co code

    Hi
    I am trying to post the Depreciation using AFAB into a newly created Co Code for the first time. But the system throws the below error asking me to post to the last month of the previous year.
    You can only post in new year after closing the previous year.
    Message no. AA687
    Diagnosis
    You want to post in a new fiscal year. However, a posting must have been made in the last period in the previous fiscal year before you can do this.
    Procedure
    Post to the last period in the previous year first.
    But this is a new co code which goes life in the middle of the current year. Then why is it asking to post the depreciation for the last month of the previous year.
    Also, I have closed the last year in asset accounting without any issues using AJAB. But still why is it showing this error. Please help me how to overcome this error and post the depreciation for the first time in the new co code.
    Thanks
    Gemini

    Hello All,
    My Fiscal Year is from November to October. My transfer date is 31 Oct 2013. Oct is my last period (Period 12) for FY 2013.
    I have uploaded legacy Asset values in the month of Febraury (Period 4 of FY 2014) and now trying to run the depreciation run in the new co code for the first time. But I am facing the error and system is not allowing me to post the depreciation.
    When I opended the Asset year 2013 and the FI Period for 2013 also and tried to post the depreciation but it says no values exist for posting depreciation in that period. Then I closed the Asset Year for 2013 using AJAB and also did the asset value transfers to the new year 2014 using AJRW.
    Again tried to post depreciation using AFAB in period 1 of 2014 but no use. It gives the same error :
    You can only post in new year after closing the previous year.
    Message no. AA687
    Diagnosis
    You want to post in a new fiscal year. However, a posting must have been made in the last period in the previous fiscal year before you can do this.
    Procedure
    Post to the last period in the previous year first.
    But the previous FY 2013 is already closed. Looks peculiar.
    Please suggest since this is very crucial for us to go live.
    Thanks

  • Post depreciation with external number range assignement

    HI
    When i am running Depreciation  run AFAB, i am getting error"created doucment number range with internal assignement. 
    Currently the number range assigned for documents is external.
    Why this error is coming... please provide solution without changing number range to internal..
    Thanks and regards
    Ramarao.p

    HI
    see the SAP document .....
    Specify Document Type for Posting of Depreciation
    In this processing step you determine the document type for each company code for posting depreciation.
    Standard settings
    SAP supplies document type AF for depreciation posting.
    Requirements
    You must have defined the document number ranges.
    Activities
    1. Check the standard document type AF. If needed, define your own document type.
    2. Specify the document type for depreciation posting. The document type you select must meet the following conditions:
    It must be a document type for batch input.
    It must be defined with external document number assignment
    So please provide the solution ...with out changing internal number range...
    Thanks and regards
    Ramarao.p

  • Posted depreciation is missing in period 7, planned depreciation for period 8 is doubled

    Hi Experts,
    I would like to ask for some explanation for this issue and how to correct the error.
    Performed Depreciation run via AFAB transaction.
    then upon checking in asset explorer. period 7 is missing while the amount in planned depreciation for period 8 is doubled.
    could you please explain how and why this thing happened?
    thanks in advance!

    solved.

  • Error when run Depreciation Posting Run AFAB

    Hi,
    I found error when run Depreciation Posting Run for period 7 2007.
    FYI. I had run Unplanned Depreciation (TCode: ABAA) with document date 31.10.2007 and posting date 31.10.2007, trans. type 640. After that, i want to run Depreciation Posting Run (TCode: AFAB) with fiscal year: 2008, posting period: 7, reason for posting run: repeat. Select on Test Run. Then i found error message as below. 
    Error Message:
    Documents manually posted within dep.doc.number range
    Message no. AA728
    Diagnosis
    In the number range interval for the document type for posting depreciation, a document  has been posted which was not created within the framework of depreciation posting. The last document posted by depreciation posting was assigned the number .
    Procedure
    Contact your Systems Specialist. When changing the number range interval for the document type in depreciation posting, you have to specify a new interval in which no documents exist. Using organizational measures, you can guarantee that there are no documents apart from those created by depreciation posting in this number range.
    Can any one help how to solve this issue?

    Hi Paul,
    Now I go to TCode: FBN1 - Accounting Document Number Ranges, then i want to change the range for year 2008.
    No Year  From No          To No           Current No          Ext
    03  2001   0300000000   0399999999   -                          /
    03  2002   0300000000   0399999999   -                          /
    03  2003   0300000000   0399999999   -                          /
    03  2004   0300000000   0399999999   -                          /
    03  2005   0300000000   0399999999   -                          /
    03  2006   0300000000   0399999999   -                          /
    03  2007   0300000000   0399999999   -                          /
    03  2008   0300000000   0399999999   -                          /
    03  2009   0300000000   0399999999   -                          /
    Referring back to Asset Accounting, the Reference Document: 19.
    Do it mean that my FI doc. no is 0300000019 ? I bit confuse on this..
    Can you guide me more details on it?
    Thanks in advance.
    Edited by: Nur Aman Abdul Manap on Apr 15, 2009 2:09 AM

Maybe you are looking for