Thinkvantage Fingerprint Enrollment

Im creating an image for the X61s and want the fingerprint enrollment to be optional. I'd like to prevent the user enrollment from automatically starting after logon. So, I need the fingerprint software installed, but dont want to be hassled for enrollment. Does anyone know how to disable the user enrollment at startup?
Thank you,
Dave
Solved!
Go to Solution.

Dave, welcome to the forum,
I believe you need to disable CSSAUTH.EXE in the Autoruns.
Message Edited by andyP on 09-04-2008 08:40 PM
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Similar Messages

T440s FP Reader Problem/Failure "Your fingerprints have not been enrolled for authentication."

I have a T440s CTO which is a great machine except that I no longer have part of the fingerprint reader functionality available to me. The machine has a Synaptics Fingerprint Sensor.
At new and after enrollment of fingerprints, functionality included:
1) Swipe at power on password screen authenticated me a) through power on password, and, b) through Windows 7 Professional logon.
2) After machine recovers from sleep, a swipe at locked computer screen authenticated me through Windows 7 password query.
3) After machine locks after set timeout, a swipe at locked computer screen authenticated me through Windows 7 password query.
I no longer have functionalities 2) and 3) described above. When I swipe at the locked computer screen, the message "your fingerprints have not been enrolled for authentication" appears at which point I have to type my password to unlock computer.
Since functionality 1) continues to work properly, my fingerprints are correctly enrolled.
I have taken the following steps:
1) updated the driver for the Synaptics FP reader
2) deleted and re-enrolled my fingerprints (multiple times) through Lenovo Fingerprint Mgr. Pro v8.01.18(x64)
3) deleted fingerprint data from the Security tab of the BIOS setup utility.
The Synaptics device driver installed is version 4.5.266.0
Has anyone else experienced this issue?
LENOVO folks - please advise how I can resolve this so that the original functionality is restored.
Regards,
BIFF

OK - I left the domain and ran FP Mgr Pro and lo and behold, no fingerprints were enrolled. Unfortunately, when I tried to enroll the fingers that I use for the FP reader, the machine told me that the fingerprints were already enrolled. Recall that I did not delete the fingerprints that were enrolled under the domain before attempting to enroll at the machine level.
Then - I deleted the fingerprints at the domain level and deleted the fingerprints at the BIOS level. I then logged in at machine level and enrolled fingerprints.
I rebooted and the machine asked for FPs at power on password and accepted my print. Unfortunately, it booted me through power on and Windows security into machine level, not my domain which is where I need to be.
This is very frustrating.

Finger print reader is not enrolling my fingerprint

I have been trying to enroll my fingerprint, but no matter how i swipe my finger accorss it keeps saying "unsuccessfull" . My pc does have the fingerprint device, I tried reisntaling driver, reinstalling software, updating driver . I have no idea what to do at this point ! Any suggestions ?

Hi,
1. Post your part number (p/n) . You'll find it at the bottom of the laptop on a sticker, which looks like this.
2. Which system are you using?
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Thinkvantage system update kills Fingerprint device [Fingerprint Software 2.0 for Windows V64]

1. Fingerprint device on my 1week old T400 (Vista64 business) has stopped working today after latest update- Lenovo Fingerprint Software 2.0 for Windows V64, Version 3.1.25.80
What can I do now to get it working ?
Thank you.
1st time thinkpad user

Hello, I posted a solution here:
http://forums.lenovo.com/lnv/board/message?board.id=Special_Interest_Utilities&thread.id=2464
Cheers,
Chris

How can I get an older iTunes U account enrolled in newer version of iTunes U?

My institution originally signed up for iTunes U in 2010, but due to various reasons, we never went live with our site. We are now ready to proceed, but we need to get enrolled in the newer version of iTunes U. I was directed to go to https://eduapp.apple.com and send a note saying that we wanted our older, private account enrolled in the newer version, but for whatever reason, I cannot log in, despite trying multiple computers and browers. I know my Apple ID and password are correct, as I just logged into this site with them. Is there anyone on here who can help me? The institution is Aiken Technical College.
Thanks,
Allyson Davis

Refer here:
http://support.apple.com/downloads/#itunes

T440p Fingerprint power-on is not working

Hi , i just recieved my new T440p , Fingerprint @ power-on is not working although all config. is done typically in lenovo fingerprint manager pro & fingerprint security settings in the BIOS , i start my laptop it goes through windows normal startup & logon without any request for fingerprint .
Solved!
Go to Solution.

Dear Ahmad
Welcome in lenovo community
Have you tried to first to enroll your fingers first , an application called Lenovo Think Vantage should be installed .
Do you have this application installed ?
Also you need to check the device manager , it's better to send us a screen shot of it .
Let us know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How do I enter an itunes U course code in iTunes on a PC? My teacher gave me a course code to enroll in their course (unpublished), but I don't have an iPad or iPhone. Can I use iTunes on my PC?

How do I enter an iTunes U course code in iTunes on a PC? My teacher gave me a course code to enroll in their course (unpublished), but I don't have an iPad or iPhone. Can I use iTunes on my PC? I don't see a place to enter my enrollment code. I also tried using the link sent to enroll but it doesn't work either. Am I out of luck?

As I noted in the other thread:
There are two kinds of content available, "courses" and "collections". If you look at the iTunes U section on the iTunes Store, you'll note some are square (collection) and some have a faux wire binder and tabs (course); you can subscribe and watch collections from within iTunes, but courses only work on iOS.
The content you see in iTunes on your PC are "collections", while your teacher has created a "course". Collections are more like podcasts, with only audio or video episodes available. Courses have more structure and richer content, including assignments and iOS-specific materials like App Store links and Pages documents.
While the distinction is not particularly relevant for iOS users – one can subscribe to either type – it is admittedly confusing for desktop users since the distinction and terminology are not explicitly defined.
Does that clarify matters somewhat?

CA web enrollment page is not shown in windows server 2008 R2 Datacenter edition

hi friends
on a windows server 2008 R2 Datacenter, i have installed ADCS (including web enrollment), & every thing is ok.
but when i connect to CA web enrollment page to request a certificate for my web server, when i select advanced certificate request, system doesn't show the page which we select which register our name & specification & we select which certificate
template do we want. instead it shows the page
in windows 2008 R2 enterprise edition this problem doesn't exist. also in standalone CA web enrollment page this problem doesn't exist.
any help pleas
thanks in advance

forget about enrollment web pages. With Enterprise CAs you should consider to use Certificates MMC snap-in:
http://technet.microsoft.com/en-us/library/cc754490.aspx
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell FCIV tool.
hi thanks.
i am familiar with cert snap-in, but i wanted to know can we restore previous web enrollment page which delivered us the ability of enroll

Fingerprint Reader does not work under Win 7

I have a T500 which I have just upgraded from Windows Vista Business to Windows 7 Professional.
Everything apart from the Fingerprint Reader and the Wireless Broadband seems to work.
The Fingerprint Reader is the Authentec AES2810, with driver version 2.0.0.18 dated 24/11/2009.
If I run the Lenovo Fingerprint software version 3.3.0.58 I get the error that the software cannot
communicate with the sensor.
The Wireless Broadband card is the Ericsson F3507g. The follwing drivers are installed:
Network adapters:
- F3507g Mobile Broadband Driver, version: 1.0.0.52 dated 29/07/2009
Ports (COM & LPT):
    - Ericsson F3507g Mobile Broadband Minicard GPS Port (COM6), version: 1.0.0.28 dated 29/09/2008
    - Ericsson F3507g Mobile Broadband Device Management (COM4), version: 4.54.7103.1 dated 26/06/2009
Smart card readers:
    - F3507g Mobile Broadband USIM Port, version 6.0.0.7 dated 12/05/2009
       Even if there is the driver information indicated above the USIM device says:
"No drivers installed for this device."
Universal Serial Bus controllers:
     - F3507g Mobile Broadband Device, version: 4.54.7103.1 dated 26/06/2009
If I use the ThinkVantage Access Connections software I get the following error message:
"The current wireless WAN connection is being managed by another client utility.
Close the client utility and try again." But to my knowledge no other Wireless Broadband client is running.
If I try Mobile Broadband Connect via the Vodaphone UK interface I get the following error message:
"No Wireless Mobile Broadband device found."
And finally if I try ThinkVantage GPS I get the folowing message:
"The GPS NMEA CPM port is not available. You need to check the following things.
- Another GPS application is using the COM port.
- COM port is disabled. You can enable the COM port in Device Manager."
Under Windows Vista both the Fingerprint Reader and the Wireless Broadband device worked without
any problems. Do anybody have any ideas on how I can resolve these two problems.
Best regards,
Frode
Solved!
Go to Solution.

Yes, it is the driver that seems to be the problem. Here is how I proceeded. Before I started to removed the Lenovo software and the driver I first made sure the the automatic driver installation was turned off. The easiest way to do this is to type "change device installation settings" in the Start Menu search box. A window then pops up with the question: "Do you want Windows to download driver software and realistic icons for your devices?". By default this is usually set at "Yes, do this automatically". Instead select the option "No, let me choose what to do", which will bring up another menu where one select the last option: "Never install driver software from Windows Update."
After you have installed the new driver do not forget to put it back to the recommended automatic mode.
I first went to Control Panel - Uninstall Programs and uninstalled the Lenovo Fingerprint Software. I then went to the Device Manager and uninstalled the AuthenTec driver version 2.0.0.18 and checked the box delete this driver software. I then rebooted the PC and during pre-boot went into the BIOS, selected Security and Fingerprint Reader and made a reset on the reader. After reboot I reinstalled the Lenovo Fingerprint Software 3.3.0.58 (7wf160ww). This time the installation went through without any error messages but when I started the software I discovered that it still did not work. When trying to run the tutorial or to enroll fingerprints I got the old error message: "Cannot communicate with sensor. Please confirm the sensor is ready."
I then checked the driver and I found that I now had the older AuthenTec driver version 8.1.2.56 dated 07/07/2009 and everything looked OK from the driver point of view. I then suddenly remembered that I had forgot to uninstall the AuthenTec TrueSuite software. I immediately uninstalled the TrueSuite software and also yet again the Lenovo Fingerprint Software, but left the newly installed driver in place. After a reboot I again reinstalled the Lenovo Fingerprint software and this time it worked. I can now run the tutorial and enroll fingerprints and the fingerprints work 100% for the Windows login. I have not yet tried to install Lenovo Client Security. I will do that later. However, I have discovered that the AuthenTec TrueSuite software has not been reinstalled after doing the last Lenovo Fingerprint software reinstallation. I am not sure if this is a good or a bad sign. Perhaps Bananaman or Cleo_Lenovo can give me some feedback on this issue.
I thank you all for helping me out with this problem. I find the Lenovo Forums of great interest and usefulness.
Cheers,
Frode

Account Enrollment Initial Failure

Hello, buddies!
I posted 2 discussion messages on the solution accelerators forum.
Both of the problems have been solved successfully. But now the next session has come up.
My milestone is to use LiveCycle ES for constructing nation-wide insurance system.
As for the first step, I've been testing LiveCycle ES solution accelerators on 8.2 version.
To ensure the capability of LiveCycle ES and also Solution Accelerators, I have to speed up the configuration the business process
of Account Enrollment.
Anyway things are not going well.
The problem is as follow:
After I have signed in Finance Corporation portal, I clicked the Apply Now button to open a Commercial Account.
The the aforementioned screen was appeared.
But no more action. I've already checked the websphere application server log files. No errors, no outputs.
And also I recorded PrepopulateSNCVars process in LiveCycle Workbench ES.
It worked fine. For pre-populating, it captured the profile of Kel Varsen correctly.
I want to check if the problem is because of selection and capture widget library.
Any idea?
Any help will be much appreciated.
Thanks.

Yes, this problem has been solved today.
While initializing database in SQL Server 2005 with hibernate, some differences between data types have impacted the SNC deployment.
To be exact, it was 'blob' type.
So i changed the 'blob' into 'varbinary' in SQL Server 2005.
Now that it seems to me everything is ok, but one thing I found is that there is a deserialize error in websphere log file.
It will be resolved soon.
Thanks.

What is the difference when you enroll in your bank's on line bill payment program?

This is really more of a general question that doesn't specifically have anything to do with Verizon Wireless. Somebody here mentioned that it's possible to have your bank involved in paying your bills on line? What exactly does that involve? Does that mean all of your vendors send their bills to your bank and then the bank automatically takes the money out of your checking account?
Here is what I do and I'm just trying to understand the difference: Right now, each individual vendor that I do business with routinely notifies me via email each time my bill is ready for viewing on line. I view the statement on line first to make sure it's correct and then I charge the payment to my checking account with my bank routing number and checking account number listed and verified. Then about 2-3 days later, the transaction hits my checking account in the form of an "e-check", I guess. I need to be sure that I am making the payments on my own and that I am documenting all of my transactions accurately in a paper ledger book that I still use. It still comes in handy for me to keep a manual record and check that against my monthly bank statements so I always know what my balance is. I still balance my checkbook. The only difference now is that I'm no longer handwriting a paper check, using up postage, or using the mailbox every time.
The way I'm doing it now is very quick and convenient but with your bank's on line bill payment program, what exactly is the difference?

Thank you. I think I'm going to leave my existing arrangement alone but that's good information to know. I don't like any of my routine bills with the same amount per month getting paid automatically besides my gym membership fee. That's just something I am anal about. I usually get accused of being "fussy". lol...But everyone is different and obviously it depends on your needs.
I didn't realize some banks charge a fee for their bill pay system but that's definitely something I would ask about before enrolling in something like that. I went to my bank's website which I use anyway for viewing my statements and all it provides is an on line form for enrolling in on line billing. It doesn't give any information. Oh well. I'll just call my bank's customer service line or speak to a banker at my local branch in person if I change my mind and decide to look into it later on.
So far the difference from what you described seems negligible in my case and that I really wouldn't gain much. But then again, I just started with paying my bills on line so it's still a new routine for me.
Thanks again.

How to include the user as a recipient of the email generated when a smart card certificate is issued by an Enrollment Agent on behalf of a user.

How can I add the requester name in the To: field of the email generated when a Smart Card certificate is issued on his behalf.
I want to address the possibility of someone (Enrollment Agent) issuing a Smart Card certificate on behalf of a user, assign a PIN and use it without the user's knowledge.
There doesn't seem to be a way in the registry to define a variable to be used in a manner similar to the TitleArg & TitleFormat way of using %1.
Jamal Saket OSFI Canada

Hi,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
TechNet Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can't enroll devices with Profile Manager - invalid key

n my case I can install profiles on devices from Profile Manager page but I cannot enroll devices.
The certificate I download to enroll is reject by my MacBook Pro Lion: Says Invalid blablabla at the end:
Now I have done log research and I now exactly and understand why it doesn't work:
the scep_helper daemon is supposed to listen to port 1640 TCP (which you should forward to your server by the way, if you want to be able to enroll devices) and provide the requsting client the root CA that signed the certificate. In my case, it can't find the root CAT to provide the client with so it can finalize the cert validation process.
In my case, that's what I see in the log:
Jul 29 02:12:44 teknologism scep_helper[1638]: SCEP_HELPER: /SourceCache/RemoteDeviceManagement/RemoteDeviceManagement-701.70/scep_helper/m ain.m:727 'status = SCEPGetCACert(session, NULL, 0)' = -25300
Jul 29 02:12:44 teknologism scep_helper[1638]: SCEP_HELPER: /SourceCache/RemoteDeviceManagement/RemoteDeviceManagement-701.70/scep_helper/m ain.m:513 'SCEPGetCACert(session, NULL, 0)' = -25300
Jul 29 02:12:44 teknologism scep_helper[1638]: SCEP_HELPER: /SourceCache/RemoteDeviceManagement/RemoteDeviceManagement-701.70/scep_helper/m ain.m:819 'challenge = GetChallengeFromSCEP(password, guid, hostURL)' is NULL
Jul 29 02:12:44 teknologism ProfileManager[516]: Could not retrieve root certificate from open directory server.
No , as for the bad news: I have no idea on how to fix. Have dug into scep_helper, googled etc. Not a single clue on how to check it's configuration or even why it can't find the root CA. By the way everyhting else (I really mean everything, ical,cardav,web,wiki etc.) work great. And profile manager too, it's just the enroll thingy that doesn't work. And the root CA cert is in /etc/certificates. My server a legit Class 1 SSL cert signed by a system trsuted CA (Startfiel to name it)
I have tried with other certs etc... It's a no go.
Can anyone help ??
How can I add that missing CA Cert in opendirectory ?

Here is some more infos...
teknologism:root root# serveradmin settings devicemgr
devicemgr:SSLAuthorityChain = "/etc/certificates/trinity.teknologism.org.C1D19D55699B48C94A18787E4F53B4C3230E 91FE.chain.pem"
devicemgr:od_active = yes
devicemgr:ssl_active = yes
devicemgr:enableCodeSigning = yes
devicemgr:updated_at = 2011-07-28 16:04:52 +0000
devicemgr:email_delivery_method = ""
devicemgr:CodeSigningPrivateKey = "/etc/certificates/teknologism.org Code Signing Certificate.ED29CE4BD9D2926D64E60EF7A117EFDB2213F0CC.key.pem"
devicemgr:apns_active = yes
devicemgr:CodeSigningAuthorityChain = "/etc/certificates/teknologism.org Code Signing Certificate.ED29CE4BD9D2926D64E60EF7A117EFDB2213F0CC.chain.pem"
devicemgr:default_profile_created_at_least_once = yes
devicemgr:knob_sets_enabled:com.apple.mail.managed = yes
devicemgr:knob_sets_enabled:com.apple.vpn.managed = yes
devicemgr:knob_sets_enabled:com.apple.carddav.account = yes
devicemgr:knob_sets_enabled:com.apple.jabber.account = yes
devicemgr:knob_sets_enabled:com.apple.caldav.account = yes
devicemgr:email_authentication = ""
devicemgr:email_port = 25
devicemgr:email_username = ""
devicemgr:id = 1
devicemgr:last_modified_guid = ""
devicemgr:SSLPrivateKey = "/etc/certificates/trinity.teknologism.org.C1D19D55699B48C94A18787E4F53B4C3230E 91FE.key.pem"
devicemgr:od_master = "127.0.0.1"
devicemgr:apns_topic = ""
devicemgr:email_password = ""
devicemgr:mdm_acl = 2047
devicemgr:user_timeout = 43200
devicemgr:server_organization = ""
devicemgr:SSLCertificate = "/etc/certificates/trinity.teknologism.org.C1D19D55699B48C94A18787E4F53B4C3230E 91FE.cert.pem"
devicemgr:created_at = 2011-07-24 11:47:33 +0000
devicemgr:email_address = ""
devicemgr:email_domain = ""
devicemgr:CodeSigningCertificate = "/etc/certificates/teknologism.org Code Signing Certificate.ED29CE4BD9D2926D64E60EF7A117EFDB2213F0CC.cert.pem"
devicemgr:email_server_address = ""
devicemgr:admin_session = ""
The 3 CodeSigning certs/keys are in /etc/certificates and their permissions are correct.
Also, don't ask me why but my ProfileManager pane in Server.app is working again. It shows all the config...but can't modify anything....as soon as I try to modify it spins the waiting whell forever... I guess it's the same error as command line serveradmin...

I have enrolled for the apple developer program but apparently have the same account name in iBooks. I need to change the iBooks account but don't know how. Do I change my apple id? Will this cause me problems with iTunes etc etc?

I have enrolled for the apple developer program but apparently already have an account with iBooks, cant have this it seems.how do I change my iBooks account, is this the apple id for my iPad and if I change this will it cause problems accessing iTunes etc?

I guess nobody knows if the crash that occured was legitimate or not? Apple phone support could do nothing for me, so I guess I am left to drive 45 minutes to the nearest store.

How to use Phone enrolment for an Intune account?

I have created a Microsoft Intune account and setup a signed company hub for phone devices.
But I cannot work out what information to enter into the Windows Phone 8.0 -> settings -> company apps in order to enrol the phone onto Intune. I have an Intune user called '[email protected]'. So I can log into Intune online by using this
account with the appropriate password.
But on the phone when it asks for email address I enter '[email protected]'. But it fails saying I should check the email address and server address. Should I be entering something else instead?

Please try to follow the instruction mentioned in
http://www.microsoft.com/en-us/download/details.aspx?id=36174
and I think windows intune forum is more suitable for your question.
<THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
Thanks
Alan Yao
MSDN Community Support
Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

Thinkvanta​ge Fingerprin​t Enrollment

Similar Messages

Maybe you are looking for

Thinkvantage Fingerprint Enrollment