Time capsule Crash /Mounting Point / share not found

I have a home network with Imac's, Appel Tv and use the Time Capsule (TC) as the router. Attached to the TC are several airport expresses. I use the TC as for time machine backups and attached is an axternal HD for media.
All was working fine.
For some reason all in sudden, halfway through working on the external data through one of the iMac's the system stops responding and it seems like the whole network is down. Checked it and seems like the TC does not give a wifi signal though the front led is green. All airport expresses were fine green and gave wifi, but (logically) no Internet.
Reboot the TC and all worked again, BUT....
I can see both the backup and external disc on the TC biut the computers cannot acces it. It give's a warning " it cannot find the original part from the HD"
I have no idea what to do now....
Any support or idea's?
I must admit that this is the first time the HD error appears, it is not the first time the TC decides for no reason that it must stop working...
Jan

As this is a fairly complex setup.. let me encourage you to use 5.6 utility.
This has access to the log, completely lost on v6.. you also have more fine control of what is going on.. not that it can solve it.
Apple made 5.6 available to Lion but not ML but the fact is, it works fine.
Some of your computers may have it installed from previous OS.. but here is how to do it from scratch.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

Similar Messages

Setting up Time Capsule as "Access Point" and not using router feature

I would like to use my Time Capsule as a wireless access point for a laptop. What settings in Airport Utility do I need to make?
Here's my setup:
Internet -> DSL Modem -> Linksys (wired) router -> Ethernet Switch -> Time Capsule.
Connect Using: Ethernet
Configure IPv4: Manually
IP address: 192.168.1.20
Subnet: 255.255.255.0
Router: 192.168.8.1
Connection Sharing: Off - Bridge Mode

Follow up to my question.
Got my laptop to access the internet via the Time Capsule. How? By having my ethernet switch connected to the WAN port of the Time Capsule - not the LAN port.
Internet ->DSL Modem -> Ethernet Switch -> Time Capsule (WAN port)
I noticed that makes it so computers on my wired LAN can't use 'Airport Utility' to access the Time Capsule. I have to move the ethernet cable from the ethernet switch to a Time Capsule LAN port, in order for my wired LAN computers to see my Time Capsule.
Is there a way, so I don't have to unplug from the Time Capsule WAN - to LAN port?

On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll

On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have to clear this everytime I boot up?

With that one, perhaps first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?

Time Capsule crashes when Time Machine starts a backup

I've not searched through the postings here to see if other people have seen a similar problem. I've not attempted to repeat the problem I've seen here so I'm not very clear about the cause.
I'm using a MacBook Pro with OS 10.5.4 connected via a network cabled directly to a Time Capsule which is connected to a DSL/Cable modem. The Time Capsule is updated with v 7.3.2 of the firmware. I've got Time Machine enabled but I'm also using the Time Capsule disk (1TB) to store photos that I've previously archived to CD. I'm in the process of copying all the data from CD to the Time Capsule.
Having copied some photo data to the Time Capsule I was trying out some photo cataloguing SW to see if it was any good (iPhoto is no good to me as I don't want to store photos on the local drive of my machine) - Kodak EasyShare v6.1. Having loaded some images into EasyShare I tried to use finder to search for the file names of some of the images to check that EasyShare was not copying images to my local drive. While I was doing this I think Time Machine tried to kick in and start doing a backup. I believe that Time Capsule crashed at this point. Finder froze and after I restarted it (via Force Quit not a re-boot) I discovered that I had no network connection and Mac OS couldn't see the Time Capsule under FInder or via AirPort Utility (the Time Machine backup also timed out and failed). Time Capsule just sat there with the disk spinning and a green light on the front as if all was OK. Actually - the disk just kept spinning (Time Capsule normally shuts down the drive after it is idle for a while). Because of this I'm pretty sure that Time Capsule had crashed.
I experimented with re-booting my Mac but still no network etc so I tried power cycling the Time Capsule and everything came back to life.
I'm guessing that my doing a search (or some other drive activity on Time Capsule) at the same time as Time Machine kicking in with a backup caused Time Capsule to crash.
Perhaps this is not a very interesting point if this problem is not repeatable but - well, I'd be interested to know if others have seen similar behavior...

I'm having a very similar problem and it is detrimental.
Here is the scenario: I have a 1TB Time Capsule as my primary router. I am able to perform backups on all but one of my machines. My iMac backs up via 1GB ethernet to the TC, my MacBookAir (60GB,SS) backs up via wireless N (270mb) and my other MacBookAir (80GB,IDE) also backs up via wireless N without any problems.
I used to use a 500mb external drive to backup my iMac but outgrew it, so I started backing up to the TC instead. No problems at all.
I also used to back up my Intel MacMini running Mac OS X Server 10.5.5 to a similar external hard-drive but haven't in a while.
I decided it finally made sense to backup ALL my Mac's to the same 1TB TimeCapsule but it's just not working out!
On the MacMini; I turn on TimeMachine, the TimeCapsule has been chosen as a backup location, it prepares backup for a moment, mounts the backup drive and then appears to begin backup up... No...! First I get a message the the TimeCapsule closed the connection, next I lose Internet connection across my entire network both wired and wireless and then the TimeCapsule light turns amber, flashes and essentially does a completel crash / reset and then comes back to life a few moments later. I can backup any other computer except the MacMini to the TimeCapsule without "crashing" it and it makes no sense! Every computer is completely up to date with all the latest patches and the TimeCapsule is running 7.3.2
I sure hope this gets resolved, seems like other people are pretty disgusted with the performance of the TimeCapsule with problems that have no resolution.

I get an error mess when trying to complete backup "The backup disk image "/Volumes Time Capsul MacBook Pro.sparsebundle" could not be accessed (error -1).

When trying to use my time machine got an error message "Time Machine could not complete the backup.
The backup disk image “/Volumes/ Time Capsul/ MacBook Pro.sparsebundle” could not be accessed (error -1).
Any ideas?

I have not found a long-term solution (fix), but in my case the volume where the Time Machine backup should occur usually is mounted on the desktop but not as a shared volume (incidated as a drive with the people holding hands superimposed over the drive icon). If I drag the drive to the trash (unmount it), the next time Time Machine is scheduled to run, it completes successfully.

How do I set up my new Time Capsule just to back up not as a wireless?

Can anyone tell me how to use my new Time Capsule just for back up not as a wireless router?
I have an ATT Uverse for my wireless service and have not been able to get the two to work together.
I just want to plug my Time capsule in and connect it to my MacBook Pro with an ethernet an click backup.
So far my computer doesn't reconnect the Time Capsule.
Thank you for your help

You will need to configure the Time Capsule (TC) to join the wireless network provided by the ATT Uverse router, as follows:
Either connect to the TC's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the TC, and then, using the AirPort Utility, change this setting:
AirPort Utility > Select the TC > Manual Setup > AirPort > Wireless tab > Wireless Mode: Join a wireless network
Wireless tab > Wireless Network Name: <select the ATT Uverse network>
This configuration will allow your Mac to connect by wireless to the ATT Uverse router and perform Time Machine backups wirelessly.
If you want to only do this backups by wire, then you will need to connect the TC directly to the ATT Uverse router by Ethernet, and then, reconfigure the TC as a bridge. You can then connect the Mac to the TC by Ethernet as well for backups.

How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine

How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine.
I have checked that the firmware has been updated to 7.6.4 . Similalrly the Win8.1 machine has been loaded with the update specified in another discussion.

Firstly how are you connecting to the TC.. wireless or ethernet?
Please open a command window and ping it.. ping by name and by IP address.
If ping succeeds at least by IP it should work.
In windows explorer type
\\10.0.1.1 (or whatever the TC ip is.. that is the default).
Having the airport utility for windows loaded can help the process. As it loads bonjour for windows.
7.6.4 firmware on the TC is useless. It works better on 7.6.1
If the ping does not succeed by either name or IP address yet you have internet through the TC, then your network is setup wrongly. You are have firewalls blocking local IP. Take down all the firewalls.

Time machine couldn't complete the backup to johns airport time capsule. the backup disk is not available

time machine couldn't complete the backup to johns airport time capsule. the backup disk is not available

You may find answers at Pondini's Time Machine FAQ for help with all things related to Time Machine.

Time Machine couldn't complete the backup to time capsule-the backup disk is not available

Time Machine couldn’t complete the backup to time capsule-the backup disk is not available

Reboot the network in correct order.. modem.. router/TC.. clients.. 2min gap.
This is just standard windows.. woops, Mac OS networking now.

PricingCalculator points was not found

The PricingCalculator points was not found
There was an error while attempting to add the item to the order.
error in server.
14:36:27,125 ERROR [UnknownService]
atg.commerce.pricing.PricingException: The PricingCalculator points was not foun
d
at atg.commerce.pricing.PricingEngineService.getCalculatorForCalculatorT
ype(PricingEngineService.java:1517)
at atg.commerce.pricing.OrderPricingEngineImpl.applyPromotions(OrderPric
ingEngineImpl.java:367)
at atg.commerce.pricing.OrderPricingEngineImpl.priceOrder(OrderPricingEn
gineImpl.java:238)
at atg.commerce.pricing.PricingTools.priceOrderForOrderTotal(PricingTool
s.java:2805)
at atg.commerce.pricing.PricingTools.priceOrderSubtotalShipping(PricingT
ools.java:1796)
at atg.commerce.pricing.PricingTools.priceOrderSubtotalShipping(PricingT
ools.java:1737)
at atg.commerce.pricing.PricingTools.performPricingOperation(PricingTool
s.java:3064)
at atg.commerce.pricing.processor.PriceOrderTotal.runProcess(PriceOrderT
otal.java:138)
at atg.service.pipeline.PipelineLink.runProcess(PipelineLink.java:233)
at atg.service.pipeline.PipelineChain.runProcess(PipelineChain.java:343)
at atg.service.pipeline.PipelineChainContext.runProcess(PipelineChainCon
text.java:185)
at atg.service.pipeline.PipelineManager.runProcess(PipelineManager.java:
453)
at atg.commerce.pipeline.CommercePipelineManager.runProcess(CommercePipe
lineManager.java:101)
at atg.commerce.order.purchase.PurchaseProcessHelper.runProcess(Purchase
ProcessHelper.java:452)
at atg.commerce.order.purchase.PurchaseProcessHelper.runRepricingProcess
(PurchaseProcessHelper.java:358)
at atg.commerce.order.purchase.PurchaseProcessHelper.runProcessRepriceOr
der(PurchaseProcessHelper.java:317)
at atg.commerce.order.purchase.PurchaseProcessHelper.addItemsToOrder(Pur
chaseProcessHelper.java:890)
at atg.commerce.order.purchase.CartModifierFormHandler.doAddItemsToOrder
(CartModifierFormHandler.java:3245)
at atg.commerce.order.purchase.CartModifierFormHandler.addItemToOrder(Ca
rtModifierFormHandler.java:2870)
at atg.projects.store.order.purchase.StoreCartFormHandler.addItemToOrder
(StoreCartFormHandler.java:1299)
at atg.projects.store.order.purchase.StoreCartFormHandler.handleAddItemT
oOrder(StoreCartFormHandler.java:1516)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
Edited by: mmmk on Nov 21, 2012 1:13 AM

go to your itempricingengine component , either through ACC or dyn/admin
e.g : http://localhost:7001/dyn/admin/nucleus/atg/commerce/pricing/ItemPricingEngine/
see your post and pre calculators.
http://localhost:7001/dyn/admin/nucleus/atg/commerce/pricing/ItemPricingEngine/?propertyName=preCalculators
http://localhost:7001/dyn/admin/nucleus/atg/commerce/pricing/ItemPricingEngine/?propertyName=postCalculators
there should be a calculator 'points'...
there may be some problem due to which your points calculator component in not getting initialized.

Ur mount point have not more space and ur system table space is full how u

ur mount point have not more space and ur system table space is full how u resize or add file . u have not other mount point .what steps u follow

Answers in your duplicated thread: Some inter view Questions Please give prefect answer help me
You can get all the answers at http://tahiti.oracle.com.
You understimate job recruiters, a simple crosscheck is enough to discard people with experience from people who memorize 'interview answers'.
Don't expect to get a job just because you memorize answers for 'job interviews', get real life experience.

The backup disk image "/Volumes/Jeffrey Brown's Time Capsul-1/Main.sparsebundle" could not be created (error 17).

The backup disk image "/Volumes/Jeffrey Brown's Time Capsule-1/Main.Sparsebundle" could not be created (error 17). How can I fix it?

Try just rebooting the TC.. or a reboot of the network..
Turn everything off and restart in correct order.. modem.. TC.. clients. 2min gap.
Try C9 in pondini for that error.
http://pondini.org/TM/C9.html
I generally make a nuisance of myself here by suggesting Apple names are more curse than help. Apple automatic naming conventions are causing havoc.. change everything to SMB compatible names.. ie windows networking which is the base common denominator of networking.. ie if it works with SMB it works on any OS.
Short.. less than 20 characters. 10 is usually plenty. Why type more than you need to?
No spaces.. spaces have to be removed even in apple names..
Pure alphanumeric.. some characters cause issues.. again the apostrophe is a nasty item to all other OS.
The -1 is stupid Mountain Lion.
eg Jeffrey Brown's Time Capsule-1
Change to JBTC

Time capsule crash when copying files from it

Hi, I'm trying to copy files from a time capsule to a windows 7 pc. When I do that the time capsule crashes. I can copy files from the windows 7 pc to the time capsule without problems. Has anybody got a clue? I just bought the time capsule, so it has the latest versions.

What do you see that you interpret as a Time Capsule crash? You can use AirPort Utility to look at the log file of the Time Capsule. Go into "Manual Setup", then invoke Base Station > Logs and Statistics. There might be a message in the log that helps explain the problem.

Is their another way like to use my time capsule as an external drive not using time machine?thanks

is their another way like to use my time capsule as an external drive not using time machine?thanks

You do not have to use Time Machine.. but the TC is hardly suitable for a NAS.. it has no means to back itself up and is relatively slow. Still that is up to you..
CCC or Superduper are good backup softwares .. and there are a number of others.

I try to backup my Lacie Rugged Thunderbolt with my Time Capsule but the Lacie is not active (grey) in the Time Machine preferences. Why ?

I try to backup my Lacie Rugged Thunderbolt with my Time Capsule but the Lacie is not active (grey) in the Time Machine preferences. Why ?

@LaPastenague
Morning / Afternoon.
We may have an unfair advantage in that the Internet gets here faster than it does "down there".

Time capsule Crash /Mounting Point / share not found

Similar Messages

Maybe you are looking for