ToDo Bar Missing Items with 30 Day Cache

Hi all,
We have had a issue with a number of users on Outlook 2013 set with a local cache of 30 days. After a local move request of the users mailbox the task list and to do bar is missing a large number of items.
switches to /resettodobar and removing the to do bar folder via MFCMAPI also failed to resolve the issue.
Users are either expanding the local cache or switching to online mode.
These results appear to be in contrary to KB2733062 http://support.microsoft.com/kb/2733062/en-au
Note This setting does not affect the number of items synchronized with folders of the following types:
Calendar
Contacts
Tasks
Journal
Notes
Outbox
Shared or delegated

Hi,
It is so strange. Based on my further research, the Outlook cache months should not affect the task items. Please switch to Outlook /cleanviews
to restores default views to have a try.
Also try to change a computer for new Outlook client, then check whether the issue can be reproduced or not.
According to your updates, the issue doesn’t occurs in OWA and Outlook Online mode but only in Cached mode, I suggest we can also ask a question in Outlook forum for some suggestions:
https://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook
Regards,
Winnie Liang
TechNet Community Support

Similar Messages

Full-day event created from todo item with one day off

Can anyone reproduce this?
1) Create a todo item
2) In week view, drag-and-drop it to create a full-day event
Expected Results:
A full day event is created on the day onto which I dropped the todo item.
Actual Results:
The event is created the THE DAY BEFORE the one onto which I dropped the todo item...!?

Welcome to the Apple Discussions. How photos are separated when imported is set in iPhoto's Events preference pane:
Click to view full size
When importing from the Finder, i.e. a folder on the hard drive, all of the photos will be in a single Event unless that checkbox that's pointed to in the screenshot is checked.
FWIW my workflow is to upload after every shoot to a folder, name the folder to identify the occasion of the photos and import the folder into iPhoto. This gives me an Event with the same name as the folder. I also rename the photos with the international date format for the date the photos were taken: YYYY-MM-DD-001.jpg, -002.jpg, etc. This avoids duplicate file name issues that can crop up at a later date.
I then have the camera reformat the memory card for the next shoot.

Missing preferences, tool bars, menu items after receiving CS3 file while I have CS2

I have Indesign CS2. I rec'd a CS3 file not knowing it was CS3. A message appeared as follows:
Cannot Open. Please upgrade your plugins to the latest versions, or upgrade to the latest edition of Indesign.
I went into HELP, Configure plugins. Chose "all" and "required" plugins. I then clicked ok and it said "All plugins available when you restart application" and it still wouldn't open. Then I was sent an exchange version of the same file and it still wouldn't open. I received this message:
Cannot open. InDesign may not support the file format, a plug-in that supports the file format may be missing or the file may be open in another application.
After this I wasn't able to get my CS2 screen back the way it was before. There's no introduction when I open the program, my tool bars aren't present, and the menu items aren't as extensive as they were before.
It was then suggested I reinstall Cs2. I logged in under the administrator. CS2 was different than the way I had it before but the tool bars were present. I then logged in under my name and there are still problems;no tool bars, missing menu items, no intro, etc.
I then tried rebuilding my preferences using these instructions;
The fastest way to do this for InDesign CS2 (and any CS2 program) is to quit the program, then hold down Command-Option-Shift-Control immediately after starting it up again, and keep those keys held down. (On Windows, hold down Control-Alt-Shift.)
If you mashed on those keys quickly enough, youll get an alert when the splash screen appears offering to Delete InDesign Preferences File?. Click Yes, but dont release the modifier keys while you do so, because youre going to get a second alert to which you should also click Yes.
Now you can release the keys and InDesign will complete the boot-up process with fresh, clean Preferences.
Nothing happened so my program is still missing preferences, menu items and toolbars. Any help would be greatly appreciated.
Thanks
Operating System Windows XP Professional
Dell Precision 360

First, you need to realize that resetting preferences will put them back to ground zero, not the way they were the last time you were happy.
You can try the key combination again and see if you are any faster (we're talking near instantaneous) or you can open your user profile, show hidden files and folders and navigate to C:\Documents and Settings\Administrator\Application Data\Adobe\InDesign\Version 4.0 and rename the two files InDesign Defaults and InDesign SavedData.
In your case, a better first option, I think, would be to try System Restore which you'll find in System Tools under the Programs > Accessories heading on the start menu. Go back to the first restore point before you tried to open the file, if you can.
In any case, for you to open a CS3 .inx file you will need to be fully patched the the last CS2 update, and you should expect to see some text reflow issues, as well as missing any CS3 features that the author used which aren't supported in CS2.
Peter

We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help..

We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help.

Are you wanting to import iCal to the MacBook Air. Since iCloud doesn't work with 10.6 OSX you probably don't have any data in iCloud yet?

How to find open SO Items with tax code for a particular day?

Dear all
If i want to see all open SOs(items), with tax code for a particular day, how to find using table VBAP in SE16?
Please guide me
Edited by: Julius Bussche on Mar 3, 2009 11:10 PM
Please use descriptive subject titles and the search

Hi GB,
Its always better to see through the standard reports , as you will be able to see the aditional info as well.
In the case of table in se16 you will be able to see one table at a time and then you need to manually figure out the fields that required.
For example if you want to see the sales order details through tables then
1.You have to go to VBAK to see the document type and then you need to go to VBAP to see the items , it means that you need to access 2 tables for this simple thing ....
In standard reports there will be lot of joins between the tables and you can view the data more elobarately as weel.
Note : In general if you want to see the complete details of the documents(open), then pls use the reports.
Regards,
Vvieks

Mdm uwl iview [(Item) Item is missing from the UWL persistent cache ]

Hi All,
we have a custom MDM repository, so I created the xml configuration file and uploaded into SAP system and clicked on "Register Item types" button and I am able to see that my items has been sucesfully registered.
Now I am using the UWL iview and when I view the connection status, it says that it is sucessfull for the backend MDM system. but i couldnt get the task that i created in the backend system for my user id. I checked the Uwl Log file, The error in the log file is
"com.sap.netweaver.bc.uwl.UWLException: (Item) Item is missing from the UWL persistent cache #"
Also the views that I mentioned in the XML configuration are not appearing in the UWL.
Could you please help me in resloving this issue.? any help?
Thank You
RKR
P.S: Posted this question already in Portal Implementation forum, but thought that the MDM experts might have already worked on this type of problem..
Edited by: RKR on Jan 6, 2008 12:15 AM
Edited by: RKR on Jan 7, 2008 8:27 PM

Hi,
I have the same problem, have you found any solution?
Are you also running MDM 5.5 SP6?
BR
Michael

How to create an item with date type mm/yyyy (no day)

Hello,
Is it possible to create an item with date type mm/yyyy (no day)? I want the pop-up date picker to just show month and year.
Thanks,
Jen

Hi,
you cannot pop-up date picker to just show month and year, but you can set your item format as MM-YYYY
You can check this APEX_ITEM.DATE_POPUP2 at : http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/apex_item.htm#CHDJHBCG (if using apex 4.1) else http://docs.oracle.com/cd/E10513_01/doc/apirefs.310/e12855/apex_item.htm#CHDFDDEI
Edited by: Sergio_doudou on 2012-04-13 14:26

Account statements with 30 days past due items for customer

Hi Guys,
My client wants to generate the account statements or letters for customers whose open items are 30 days past due.I guess its related with dunning process not with generating regular statements using Tcode F.27. Could anyone please guide me what are the steps involved in achieving this scenario,and how system will capture the customer accounts outstanding with line items 30 days over due.I be grateful.Thanks
Iqtidar

In IMG -> Accounts Receivable ->Dunning->Basic Setting-> Define Dunning Area first and
Then define the dunning Procedure this where you will mention the due date after which you have to start the dunning procoss and the interval between 2 dunning level. Transaction code is FBMP
Attach the Dunning Procedure to the Customer Master ->Company Code Data -> Correspondence
Then run the Dunning Procedure in the Transaction Code : F150

Items not visible in Cached Exchange Mode Outlook 2013

Outlook 2013, exchange 2010 14.2.247.5. I know it's an older version and I'll update if I need to.
So this is a tough one. I noticed one day while on a conference call that I was not receiving into my inbox an email that was just sent to me with a power point presentation. When I took it out of cached mode I saw the emails, 3 that were sent in total.
So I toggled cached mode, online mode a few times and adjusted the sync period and they started showing up in my inbox in cached mode.
Problems never go away that easy!!!!!!
So today I went into a shared account and in a particular folder there were missing items. Mostly items with attachments. There were a few emails listed about 15 or so but there are close to 2,000 emails in that folder mostly all with attachments. I deleted
the OST and there is no difference, still the same number of emails as before.
Tried the toggle routine but that didn't have any effect.
So I right click on the folder and go to properties and click the synchronization tab. It says "Last synchronized on: Never" , though there are items displayed, even after deleting the OST. It also says "Server folder contains 2,007"
and "Offline folder contains 12".
So I click filter and more choices and none of the options will allow me to sync all types of emails so I chose "Only items with:" and selected "one or more attachments".
All the emails with attachments are now visible and now the properties still says "Last synchronized on: Never" but now "Server folder contains: 2,007" and "Offline folder contains: 1,998".
Well I then clear the filter and low and behold, "Last syncronized on: Never" "folder contains: 2,007" and "Offline folder contains:" wait for it.................. "2,007"! And new items with attachments
are coming in.
WHAT THE _____. This is BAD because I am tasked with rolling out Office 2013 and caching is a must for my environment! But I cannot go live with such a bug or misconfiguration.
I've seen a few threads around the interweb about similar situations but nothing very clear and no real troubleshooting details.

Ok, I did more digging this time on the exchange server. I get see this error in the event viewer.
Log Name: Application
Source: MSExchangeIS
Date: 5/2/2014 1:59:24 PM
Event ID: 9646
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: contoso.com
Description:
Mapi session "5fa396f3-d773-457a-8cfb-1e4d49bff426: /o=/ou=First Administrative Group/cn=Recipients/cn=myself" exceeded the maximum of 500 objects of type "objtFolder".
So Why is this happening. I read it will cause all kinds of sync problems. Is it because I have a whole bunch of shared accounts in my folder list? I know I certainly don't have 500 folders!
I also just stumbled across this sub folder "Sync Issues" and "Local Failures" when looking at the number of folders I have and a whole bunch of errors.
13:43:34 Synchronizer Version 15.0.4605
13:43:34 Synchronizing Mailbox 'Me'
13:43:35 Synchronizing local changes in folder 'Sync Issues'
13:43:35 Uploading to server 'exchagne.contoso.com'
13:43:35 Error synchronizing message 'Synchronization Log: '
13:43:35
[80040305-54A-4DE-324]
13:43:35
Your server administrator has limited the number of items you can open simultaneously. Try closing messages you have opened or removing attachments and images from unsent messages you are composing.
13:43:35
Microsoft Exchange Information Store
13:43:35
For more information on this failure, click the URL below:
13:43:35
http://www.microsoft.com/support/prodredirect/outlook2000_us.asp?err=80040305-54a-4de-324
13:43:35 Moved a message that failed synchronization to 'Local Failures'. Message subject -> 'Synchronization Log: '. You can view this message in your offline folder only.
13:43:35 Done

Custom icon for bar button item on iPhone?

Hey all,
I'm trying to set a custom image as a bar button item in my iPhone app and can't figure it out. I don't want the image inside a button, I want the image to be the button itself. If I use initWithCustomView the area isn't clickable anymore (unless I'm missing something).
Does anyone know how to do this?
Thanks,
Mike O.

I am having the exact same problem, but I cannot figure out the solution. I tried initWithCustomView: with a UIImageView, and then with a UIButton. If I set the UIBarButtonItem's target and action, that method does NOT get called in either scenario, and when i set the UIButton's target and action in the latter scenario, it STILL does not get called. Could you post your working sample code? Here is an example of my code which DOES NOT WORK!
UIButton * button = [UIButton buttonWithType:UIButtonTypeCustom];
[button setImage:[UIImage imageNamed:@"NowPlaying.png"] forState:UIControlStateNormal];
[button addTarget:self action:@selector(nowPlayingButtonClicked) forControlEvents:UIControlEventTouchUpInside];
nowPlaying = [[UIBarButtonItem alloc] initWithCustomView:button];
nowPlaying.action = @selector(nowPlayingButtonClicked);
nowPlaying.target = self;
Thanks for your help.
Message was edited by: Ben Sussman

OS X Start up : Menu bar missing

Hi,
MacBook Pro mi-2010, OS X 10.8.2 (clean install).
For some start-ups, the menu bar is missing! (with the apple menu item, at the top of the screen).
The place for it is reserved, the menu bar seems to be invisible.
When you lauch any application from Dock the menu bar is definitively restored (until you restart the system).
It's not happening each time.
Everything is up to date.
If you can help, thank you...
Frank

What is in your Login Items folder?
- What do you mean, my login home folder. There is only standard folders.
Does this behavior persist for a different user, e.g., Guest?
- Yes it does
Does this behavior persist when Starting up in Safe Mode?
- I don't know because starting this mode is very very very long to boot. And I need to boot and reboot many times to be sure whether it happens or not in safe mode.
Third party
- Yes, SSD drive, firmware freshly updated. TRIM is activated with Trim Enabler.
- Yes, 8Go of RAM.

Append New Item with BAPI_RESERVATION_CHANGE

Good Day Gurus,
I was able to modify Material Reservation Items with BAPI_Reservation_Change, but appending a new item causes a bapi message of "Not possible to add and update at the same process"
what's causing this error? or is there any other work around to achieve my goal?

Hello,
Check this standard function module IDOC_INPUT_MATERIALRESERVATION A. Inside this this BAPI has been called. So, go through it and see anything you have missed.
Also, check the function module documentation available.
Thanks,
Abhijit

Cannot backup my files / copy my files and folders due to error message " The operation can't be completed because an item with the name ".DS_Store" already exists. "

Hi Apple community!
I have a [rather worrying] problem.
When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
" The operation can’t be completed because an item with the name “.DS_Store” already exists. "
I am not given an option to skip this file or anything else.
But I simply cannot complete the operation!
I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
but no success.
The same thing keeps happening.
At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
So effectively, it seems I cannot backup my files anywhere!
Any help or advice would be greatly appreciated.
Thank you.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Customer line items with balance carry forward no opening balance

Hello FI Experts,
We have ticket where the user is using a Z* Report for Customer line items with balance carry forward. In 31.01.2007 user has posted some legacy data, latter he was executing this Z* report then user can see the values posted on the same day (31.01.2007) as line items. But he was executing the report on 01.02.2007 then he was not able to see the line item as well as the values posted on 31.01.2007 as opening balance as on 01.02.2007. But if we run the report as on 01.01.2008 then we are able to see the values which are carry forwarded as opening balances. Did anyone have worked on this type of scenario?
Requirement Here Is: The values that have been posted on 31.03.2007 which are still open line items should get displayed as opening balance as on 01.02.2007.
Thanks for helping on this issue.

Hi,
Any report will get data from Tables. Please check whether the table you have used to develop this report has opening balance.
Balance will be carry forwarded only when you run the balance carry forward program. Check whether this was run for the date you have specified. This can be done in the year end.
If you are checking in the middle of the year, then the balance will not be carry forwarded.
Regards,
B. Radhika.

[Sales A/R] [Sales Report] [Open Item List] [missing item]

Dear Expoerts,
Business One 2005A:
How to restore or rectify the 'missing item' on the Open Item List?
There is an item shows Commiited 10 however there is no corresponding Sales Orde.
Since there is no stock therefore data shows Available -10.
How can we purge this bug because we tried Goods Issue and Restore, neither methods can do anything about it.
Your advice will be very much appreciated.
Kunitomo
Tokyo, Japan

Dear Gordon,
Yes, i'm sure. When i test it, i copy Sales Order (eg. got 5 items - 4 of 5 item is 0 amt) to Delivery Order (got 5 items - 4 of 5 items is 0 amt). Then i delete the row of 4th & 5th item with 0 amt.
FROM Sales order:
Example: 1) Item A      $1,000.00
               2) Item B              $0.00
               3) Item C              $0.00
               4) Item D              $0.00
               5) Item E              $0.00
To Delivery Note:
Example: 1) Item A      $1,000.00
               2) Item B              $0.00
               3) Item C              $0.00
               4) Item D              $0.00 (Delete row in Delivery Order)
               5) Item E              $0.00 (Delete row in Delivery Order)
After i check the Open Item List - the amt, net & tax do not show the figure for this Sales Order. The Sales order just show $1,000.00 in "Original Amount" in Open Item List.
Please check for me, the SAP B1 system std is like that?
Thank you.
Regards,
Sheon

ToDo Bar Missing Items with 30 Day Cache

Similar Messages

Maybe you are looking for