Transfer and sms issues

1) How can i transfer music and pictures from my computer (itunes) to my iphone.
2) How can i get delivery messages when i send sms

Sms problem solved on http://www.ardorpes.com/2009/03/02/how-to-change-message-centre-number-on-apple- iphone/comment-page-1/#comment-1114

Similar Messages

Apps transfer and authorization issues

I have nearly 100 apps on my iPhone 3 that I need to transfer to my iTunes account. Despite authorizing my computer, it keeps asking me to re-enter my details and won't start the sync from my iPhone. Going round and round in circles - what do I do?

Same here, I have an iPhone 6. After updating to 8.3 the phone started to lag, the battery consumption went crazy, the phone started to overheat and the games started to stutter and freeze for short periods of time. From what I've read on the internet this update is good for 5s or lower models but for 6 and 6+ it's a lot worse. This is unacceptable since Apple has only 5 phone models compatible with iOS 8 and they have all the resources and time to make the things bette.

N80 SMS and Ringtone issues.

Hi Everyone,
My phone takes too long to send SMS (2 - 3min), my gallery freezes when you revert back to it after editing a picture and the ringtones play when my phone rings, but seconds later it slows down like a broken record!
I have perform the *-3-Green reset, I have had the software updated and the issue is unresolved.
I dont think Nokia knows what to do now except for reloading the firmware. (Theey have reloaded it a total 9 times since I got the phone in July 2006)
Can anyone shine some light, apart from going to another brand?
My carrier is Vadofone AU.
Cheers.
Nokia N80 Pearl Black | v4.0623.0.41 | RM-92 | 68.01
Sydney, Australia

in the application manager section of the Nokia N80 handset, is there anything that can be removed which may be causing slowness??
i just looked and i have the following in the application manager section, what can i safely remove?
QUICKOFFICE
CATALOGS
WIRELESS KEYBOARD
SEARCH-LOCALPLUGINS - HK
SEARCH LOCALPLUGINS - IT
SEARCH LOCALPLUGINS - FI
SEARCH LOCALPLUGINS - SE
SEARCH LOCALPLUGINS - UK
SEARCH LOCALPLUGINS - DK
SEARCH LOCALPLUGINS - FR
SEARCH LOCALPLUGINS - ES
SEARCH LOCALPLUGINS - NO
SETTING WIZARD
ADOBE READER LE
SEARCH-GLOBAL PLUGINS
SEARCH
SEARCH

TS2755 iOS 7.1 SMS and iMessage issues

Ever since I updated my phone to 7.1 my iMessage and SMS has been playing up....I recieve some messages about 12 hours after they were sent, and some not at all. A lot of my friends are having the same issue. Are apple aware of this bug and are they working to fix it??

I have this problem also and I have visited an apple shore who couldn't help. I've reset all my settings and have fine a full system restore, with no solution.
I have had to turn iMessage off to ensure I receive messages sent to me.
Apple do not seem to want to acknowledge this as a problem, so far.

How do I transfer my SMS messages from 4s to 5

How do I get my old SMS messages from 4s to transfer to 5.
I have spent all day getting my 5 synced and the SMS issue is my last task to transfer.
Please HELP!!

you back up your old phone to iTunes, and restore your new phone from that old phone's backup.

Different alerts for email and sms messages for a contact with custom ring tone

Hello,
I have a Curve 8530 with OS 5.0.0.395.
I have my default sound profile set up to play one type of alert sound when I receive and email message and another when I receive an SMS message (so I know the difference without looking at my phone). That works fine except for contacts that I also have a custom ring tone set up for. It seems that under the Custom Ring Tones/Alerts section of the contact there is only one entry for Messages and it applies to both email and SMS. If I have the contact's message alerts set to the alert I have for email, then their SMS messages play the same alert and I might think it's an email. Or if I have the messages alerts set to the SMS alert sound then their emails sound like SMS messages. Is there a way to have a custom ring tone set up for a contact but still allow their emails and SMS messgaes to follow the current sound profile's settings?
Thanks.

Hello,
Have you had any luck resolving this issue. I had a 8230 and this was possible. But like you I can get the 8530 to work. If you found the solution, please let me know.

Problems with email and SMS after 1.3.5

Let me first say that I love the Pre. Up until this point it has been perfect - I have a replacement, but that is because I dropped it (wrong angle, wrong location, broken screen). However, following the 1.3.5 update I'm now having a fairly important problem with email and sms - I can receive email and messages, but not send them.
I have two email accounts. My personal account is with earthlink. My work account goes through an ISP using the domain name of my employer. I'm not using Microsoft Exchange or Outlook. I have tried deleting and reentering the accounts and that did not work. I can receive messages but get error messages when I try to send.
The same for messaging. I don't use it very often. But yesterday I get a text message and tried to respond and got the error message.
I power the phone off every night because I have a landline and use that as the primary phone at home.
I have been looking around message boards trying to find a fix for this. Has anyone had this issue and resolved it?
Thank you.
Post relates to: Pre p100eww (Sprint)
Message Edited by starburst42 on 01-05-2010 07:06 AM
This question was solved.
View Solution.

I forgot to add that this is a stock Pre. There are no patches or homebrew apps.
Edit:
I found a fix for the email problem, in posts on precentral and this board from a few months ago. The info came up in a Google search, and not searches of the boards, which is kind of frustrating. Here is the info, and the link. I really wish Palm would put info about this work around on their site, or at least make it easy for people to find. The solution is the last message in the thread linked below:
Had the same problem. Checked with Earthlink - no help. Checked with Sprint - no help. Checked with Palm - no help. Here is what finally worked:
Delete the earthlink account and start over. When you do - this is the key - set up the account manually! If you use the Pre defaults and try to change the settings it will not correct the problem. Your settings for outgoing mail must be:
"smtpauth.earthlink.net"
Use Authentication set to "on"
username is your email address
your email password
port set to "587"
encryption "none"
Again, the key is to set up manually.
smtp email fix
Message Edited by starburst42 on 01-06-2010 12:08 PM
Message Edited by starburst42 on 01-06-2010 12:09 PM

Separate Email and SMS messages not found

Hi Guyz,
I'm just wondering, I can't find any options under messages separating email and SMS messages on my 8100. Would this be a platform issue? My current platform is v4.2.0. Is there a way to download and upgrade a new platform? Or can i just download a theme that has that option...
Thanks in advance

Go into messages,
Press Menu button,
Scroll to options,
then general options,
scroll down and you will see SMS and Email inboxes: Theme controlled etc, change it to seperate.
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

Email Messages Have Started Arriving as Both Email and SMS

All of a sudden, all of my email messages have started arriving on my iPhone as both mail and SMS messages. This happened yesterday (Mon., 3/3/2008) evening. I had downloaded the latest iPhone software the previous day and had had no initial problems in the first 24-plus hours. I haven't intentionally changed any settings. Does anyone have any idea what's going on?

Mine, too. Although I hope by posting this "all's well" message that I don't cause it to start again. Regardless, good to know I wasn't alone with this issue. Thanks!

Email and SMS notifications stop working occassion...

I recently updated the firmware on my E71 to the latest. I now have an issue where the email and SMS notifications on the home page periodically disappear. Once the notification icons have disappeared, I need to restart my device in order to get the icons back again. This never happened with the old firmware.
Is this happening to anyone else? Thank you.

Sounds like an software issue..
Perhaps you may wanna try reinstall the firmware on your phone or do the following:
- A soft reset by keying in *#7780# when on standby - This will not delete any data but will restore all the settings back to default.
If that does not help then you may wanna try doing a hard reset by keying in *#7370# when on standby - This will reformat the phone. DO NOT FORGET TO DO A BACK UP AS THIS WILL ERASE YOUR ENTIRE PHONE MEMORY.
The security code by default is 12345
Message Edited by kingpin007 on 21-Feb-2009 02:14 PM
Mark me a KUDOS if this has helped...

I restored my iPhone 5 to IOS 7.1 on computer and tried to restore from icloud back up. It says "restore completed" but Apple logo keeps popping up every 5 seconds. It restored only contacts and sms. I can access the phone but have to stop if logo pops

I restored my iPhone 5 to IOS 7.1 on computer and tried to restore from icloud back up. It says "restore completed" but Apple logo keeps popping up every 5 seconds. It restored only contacts and sms. I can access the phone but have to stop if logo pops

Hello khanhlinh98,
I would recommend performing the following steps in order to stabilize your iPhone.
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see the battery icon in the upper-right corner of the screen. Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

Different sales area for Inter company stock transfer and STO

Hi People,
                       Is it possible to have two different sales area's for Inter company stock transfer and within the company stock transfer. The problem is in below step
IMG->MM->Purchase Order->Setup stock transport order->Define shipping data for plants.
In this step when you define plant as customer, the same plant as customer needs to be maintaind for both STO and Inter company and there is only one entry of sales area possible for this single plant. So, how can the task be achieved.
I want that STO should be carried out by sales area lets say X/Y/Z
Inter company should go through A/B/C.

hi dear,
           It is not possible at all to have two sales area for given Plant in STO.
           What is issue in that u can Transfer any MATERIAL, just need to extend it to given sales area.
Reagrds
AJIT K SINGH
HAPPY TO HELP U

MyRIO memory, data transfer and clock rate

Hi
I am trying to do some computations on a previously obtained file sampled at 100Msps using myRIO module. I have some doubts regarding the same. There are mainly two doubts, one regarding data transfer and other regarding clock rate.
1. Currently, I access my file (size 50 MB) from my development computer hard drive in FPGA through DMA FIFO, taking one block consisting of around 5500 points at a time. I have been running the VI in emulation mode for the time being. I was able to transfer through DMA from host, but it is very slow (i can see each point being transferred!!). The timer connected in while loop in FPGA says 2 ticks for each loop, but the data transfer is taking long. There could be two reasons for this, one being that the serial cable used is the problem, the DMA happens fast but the update as seen to the user is slower, the second being that the timer is not recording the time for data trasfer. Which one could be the reason?
If I put the file in the myRIO module, I will have to compile it each and every time, but does it behave the same way as I did before with dev PC(will the DMA transfer be faster)? And here too, do I need to put the file in the USB stick? My MAX says that there is 293 MB of primary disk free space in the module. I am not able to see this space at all. If I put my file in this memory, will the data transfer be faster? That is, can I use any static memory in the board (>50MB) to put my file? or can I use any data transfer method other than FIFO? This forum (http://forums.ni.com/t5/Academic-Hardware-Products-ELVIS/myRIO-Compile-Error/td-p/2709721/highlight/... discusses this issue, but I would like to know the speed of the transfer too.
2. The data in the file is sampled at 100Msps. The filter blocks inside FPGA ask to specify the FPGA clock rate and sampling rate, i created a 200MHz derived clock and mentioned the same, gave sampling rate as 100Msps, but the filter is giving zero results. Do these blocks work with derived clock rates? or is it the property of SCTL alone?
Thanks a lot
Arya

Hi Sam
Thanks for the quick reply. I will keep the terminology in mind. I am trying analyse the data file (each of the 5500 samples corresponds to a single frame of data) by doing some intensive signal processing algorithms on each frame, then average the results and disply it.
I tried putting the file on the RT target, both using a USB stick and using the RT target internal memory. I thought I will write back the delay time for each loop after the transfer has occured completely, to a text tile in the system. I ran the code my making an exe for both the USB stick and RT target internal memory methods; and compiling using the FPGA emulater in the dev PC VI. (A screenshot of the last method is attached, the same is used for both the other methods with minor modifications. )To my surprise, all three of them gave 13 ms as the delay. I certainly expect the transfer from RT internal memory faster than USB and the one from the dev PC to be the slowest. I will work more on the same and try to figure out why this is happening so.
When I transferred the data file (50MB) into the RT flash memory, the MAX shows 50MB decrease in the free physical memory but only 20MB decrease in the primary disk free space. Why is this so? Could you please tell me the differences between them? I did not get any useful online resources when I searched.
Meanwhile, the other doubt still persists, is it possible to run filter blocks with the derived clock rates? Can we specify clock rates like 200MHz and sampling rates like 100Msps in the filter configuration window? I tried, but obtained zero results.
Thanks and regards
Arya
Attachments:
Dev PC VI.PNG ‏33 KB
FPGA VI.PNG ‏16 KB
Delay text file.PNG ‏4 KB

How can i transfer my sms from iphone 3gs to iphone 4s?

Hi
I am thinking about getting an iphone 4s
How can I transfer my sms from an iphone 3gs to an iphone 4s?

I just bought a new iPhone, and also had an iPhone before.
You sync the old iPhone, plug in the new iPhone, and then you will be asked if you want to sync the new one with the old one.
I also wanted to keep all my SMSs, and it worked - they were transferred to my new iPhone.

MacBook Pro Health and safety issue: Potential Burn during normal use

Hi,
I am not a complainer. I worked for Apple of 6+ years and have had a top of the line Apple Notebook since Apple created the concept of the laptop notebook.
I recently experienced a 3rd degree burn using my MacBook Pro that I think Apple needs to warn folks about:
MacBook Pro 17"
Machine Model: MacBookPro1,2
CPU Type: Intel Core Duo
Number Of Cores: 2
CPU Speed: 2.16 GHz
L2 Cache (shared): 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP12.0061.B00
Serial Number: ()
SMC Version: 1.5f10
Sudden Motion Sensor:
State: Enabled
I had my laptop on my lap. I was wearing shorts. It noticed that it was warm on my leg where the left side of the MacBook Pro was touching my leg, but it didn't create a reflex pain response.
Upon completing my session, when I closed the machine and put it away, I noticed a 1 inch x .75 inch blister on my leg where it had been touching the MacBook/Pro; and it has turn out to be a significant burn.
I checked all the documentaiton that came with my MacBook Pro and there was no warning about the potential of this situation.
I recommend that Apple let owners know, perhaps through an email or a popup when they visit the Apple site. Lastly, when I encountered this issue, I wasn't running any high performance, compute bound applications. It was email. So, I have to believe that it is possible to detect wait states within the processes running and take the processors to a low power mode of operation when they are not performing actual work. Am I out in left field here?
I want Apple to be successful. I haven't heard of a similar complaint on any of the high performance PC's at work. Beyond a Health and Safety issue, this is also a reputation issue. Better to face into the storm and honestly deal with this issue.
A slightly crisp, but loyal, MacBook Pro user.
Mike Doherty
MacBook Pro Mac OS X (10.4.5) Potential Health and Safety Issue- 3rd degreee burn potential under normal use

Mike... I do sympathize with your situation but let me correct you:
I recently experienced a 3rd degree burn using my
MacBook Pro
Do you know what a 3rd degree burn is? A 3rd degree burn involves the dermis, and is full thickness involving the subcutaneous tissues and fat underneath your skin layers. This is something that usually happens when man meets fire, electrocution, and chemical burns. A 3rd degree burn is not typically achieved by a simple transfer of energy by conduction, unless extreme heat for an extended period of time.
I had my laptop on my lap. I was wearing shorts. It
noticed that it was warm on my leg where the left
side of the MacBook Pro was touching my leg, but it
didn't create a reflex pain response.
Reflex pain response? Don't try to make up medical terminology. You didn't feel it much like you don't feel the sun when you get a sunburn initially... your skin slowly adjusted to the temperature, and at some point the heat increased over the threshold of which causes damage. You should have gone to the doctor if you were overly concerned.
Upon completing my session, when I closed the machine
and put it away, I noticed a 1 inch x .75 inch
blister on my leg where it had been touching the
MacBook/Pro; and it has turn out to be a significant
burn.
You're right, if you have a 1inch by almost 1 inch heat related blister on your leg, it is bad, nothing that I would consider significant. That is less then 1% of your body, probably about 0.25% to 0.5%, and only a 2nd degree burn. Your most significant complication would be a local skin infection.
I checked all the documentaiton that came with my
MacBook Pro and there was no warning about the
potential of this situation.
Actually... I'd hate to call you a liar, but I'm pretty sure that it does warn about burns.
To confirm this, apple has also information online:
http://docs.info.apple.com/article.html?artnum=30612
I recommend that Apple let owners know, perhaps
through an email or a popup when they visit the Apple
site.
They do... link above.
Lastly, when I encountered this issue, I wasn't
running any high performance, compute bound
applications. It was email. So, I have to believe
that it is possible to detect wait states within the
processes running and take the processors to a low
power mode of operation when they are not performing
actual work. Am I out in left field here?
No, you're definitely not. Here's where I start to agree with you. For the computer to heat up that much, when not doing things like rendering video is abnormal, and you deserve to have apple check out your computer. I think you should contact them on this concern.
I want Apple to be successful. I haven't heard of a
similar complaint on any of the high performance PC's
at work. Beyond a Health and Safety issue, this is
also a reputation issue. Better to face into the
storm and honestly deal with this issue.
It's harder for other manufacturers... our computers are aluminum, designed to disperse the heat. Technically they are considered "portables" not laptops, but I don't get into that argument because I disagree with the word "portable"... it's meant to work on your lap, and if you can't comfortably using regular apps, you deserve an answer.
A slightly crisp, but loyal, MacBook Pro user.
Hey, at least you're taking it with some humor. It's a shame you had to get hurt as a result of your computer. If I were you I would have gone to your Primary Care Physician, documented the burn, and returned your computer for a new one, and for something say, a free iPod for your pain.
Sorry you got hurt, I think you should have your heat issue professionally investigated through apple care

Transfer and sms issues

Similar Messages

Maybe you are looking for