Transports BWD - BWQ !?

Hello all,
How r u ?
We transported the BWD myself Objects(InfoSets, Extract Structures & DataSources) to BWQ. The transport was successful and we could see the InfoSets and extract structures in the BWQ and not the DataSources.
The SourceSystem Conversion is fine. We replicated the BWQ myself SourceSystem, even after that the DataSources are not shown. Then we tried many times transporting using many ways but did not help.
Another request was created in the BWD for the Cube with Indata Flow Before and After, the error came out like,
 DataSource ZCV_ZCV_CLINT_TRANS does not exist in source system BWA100 of version A
Mapping between data source ZCV_ZCV_CLINT_TRANS and source system BWA100 is inconsistent
DataSource ZCV_ZCV_CLINT_TRANS does not exist in source system BWA100 of version A
Field /BIC/ZCV_ANAAM will not be delivered from DataSource ZCV_ZCV_CLINT_TRANS in source system BWA100
Field /BIC/ZCV_BSNNO will not be delivered from DataSource ZCV_ZCV_CLINT_TRANS in source system BWA100
Field /BIC/ZCV_BURST will not be delivered from DataSource ZCV_ZCV_CLINT_TRANS in source system BWA100
Field /BIC/ZCV_CLINT will not be delivered from DataSource ZCV_ZCV_CLINT_TRANS in source system BWA100
Like this for all the objects.
Finally we decided to create the DataSources by hand as the InfoSets & Extract Structures are available. Here comes the nightmare,
While giving the same (BWD)DataSource name in RSO2(BWQ) it allowed us to select the Create the button without saying any error, agter entering all the needed entries while saving it shows
InfoSource ZORG_CLIENT_TEXT already exists
How come in RSO2 it will show like this ? What could be the problem ?
Could anyone get why this problem occurs ? all the attempts to create or transport the DataSources failed. This should go live soon....
Any clues ?
Best Regards....
Sankar Kumar
+91 98403 47141

Hi,
First transpot the ALL ODSs with DFB .So here you need to take tick mark for DEV R/3 only. Once it is imported into BWQ, then replicate the datasources from self system in QA BIW.
And then transport all Cubes with DFB and DFA .Here you need to take tick mark for both R/3 DEV and DEV BIW in the transport connector tool .
Donot forget to have the conversion of source systems in QA BIW.
i,e the mapppinf should be like:
DEV R/3---> QA R/3
DEV BIW---> QA BIW.
With rgds,
Anil Kuamr Sharma .P

Similar Messages

Urgent BWD-BWQ transport question

Hi Guys,
Unfortunate i delete the info object from C/S, T/S,T/R,U/R,ODS and I/Cube.. now i want to transport the same above the Structures from BWD-BWQ is't posible for this, If posible then what is procedure for transport help me guys....
If not what are the steps i have take .........
Thank you
DST

Hi DST,
If you have the same oject available in BWD the u can create a new CTS , include the object in question and retransport or if u know the request u used to transport this object previously to BWQ then u can re import the same request again to BWQ ....need not worry abt other objects in the request.
Hope this helps
Anand Raj

Steps for transporting info source from BWD- BWQ- BWP

Hi all,
any body tell the steps for transporting Infosource from BWD to BWQ to BWP.
Thanks in Advance
Satya

HI Satya,
Go to transport connection select the infosources under it...select objects there select ur infoaource u want to transport-there is an option tpo change the paskage if u want...assign a new request..once the new request is aassigned...then go to SE10 and then release the request. Now its ready for transport.Normally after releasing the request the Basis guys transport the request.
Regards,
Marc.
Message was edited by: Marc

Query Changes: Variable not collected in Transport

Hi Experts,
Intiatlly some one created a query and it was transported to BWQ from BWD.
Due to some changes, I needed to rework on the query. For that I did the following:
a. In the Administrator Transport Workbench, I collected the query
b. CLicked on the Transport checkbox
c. Then assigned a new BEX Transport request.
d. I then made changes in the query plus added a variable in the query.
e. I checked my query and it was working fine in BWD.
Now when I transport this query to BWQ, the transport fails and says
"Error when acitvating element 4DKMNO0UMEXIN0FHM6RYXXJ3F"
"Element 4E5X3H4IQ5BEDSZY1I6GW4P2J" is missing in version M"
I think the transport is missing the variable I created. So why is this not collected?
Secondly since this transport request was released will I have to recollect the query and variable. If so how?
Thanks,
Hundia

I raised an OSS Message.
The reply from SAP was:
"We have analyzed the situation with the inconsistent queries.
1. The error message
'Unable ot detect element type for Element Recreated Formula:
DBJFSQOSAL3WPK8LSCNUWNAJ"' is raise as a result of incorrect repair
procedure most likely perfomed by the program ANALYZE_MISSING_ELEMENTS.
This is very old report which allowes repair, but unfortunately this
repair is not correct. Therefore we do not recommend you to use it
in similar cases.
The element DBJFSQOSAL3WPK8LSCNUWNAJ recreated by the program as a
local formula must have type Calculated Key Figure. This info can be
obtained just by analysis of the corresponding structure members which
has to represent this CKF in the query...
2. Missing element and INCONSISTENCY. This is logically related to
the first case. I have perfomed extended anylysis and the situation is
the following.
Affected query YTEMP_ZSCNNM04_01 (4B75NN07LN3TJVDW9VX8OUACR) contains
one unresolved reference to 4B773WHW1GK5WZAPK5CZHZSH7. This missing
element can be a local structure member (FLM or SEL) or a reusable
object like calculated or restricted KF
Affected query ZORQSP_ZSPNNM021_NN_05 (4DUV3IK29VBJESNEWX20PBXM3) also
contains one unresolved reference. This is pretty similar to the case
above. The missing element is CKF. This can be found from the definitionof the related element.
Affected query YY_FT_TEST has 3 unresolved references. Here the case
is a bit different. According to my analysis the missing elements are
just such global part of a query like Filter and Sheet. This more less
means the entire definition of this query is not available.
Possible solution.
As far as I see, all missing elements are local for the BWD system.
This means that most likely we can not use transports from the other
system. By just to use this option aswell, please check if some of thesemissing can be found in the other systems
4B773WHW1GK5WZAPK5CZHZSH7
4BO650QIIZZ51VCNLZXSC4MP7
4BO652NN9NEIPI7P2IIUUMB57
4BPGWZK405TZ1061K1FSQCT0R
4DVE6TT3PU9YJ6RQ4ETM2MDIJ
and
4DBJFSQOSAL3WPK8LSCNUWNAJ
If you find something, it is necessary to transport them to the BWD
system. This will solve some issues.
But probably you will not find them. Therefore the alternative way will
be to replaces the missing objects in the definition of the affected
queries by some other availabe objects. This is to be done manually.
For example mising CKF can be replaced by a constant value and then
in Query Designer replaced once again by any avaialbe CKF.
Such technique can help te achieve technical consistency of the queries
ZORQSP_ZSPNNM021_NN_04, YTEMP_ZSCNNM04_01 and ZORQSP_ZSPNNM021_NN_05.
Situaiton with the YY_FT_TEST is more critical. There are no chances
to repair this one. The only option will be to delete it using the
transaction RSZDELETE.
Please tell me how would you like to process. In principle, this case
is not really critical as the missing elements are just locally affect
queries and not used by reusable query components like CKFs/RKFs which
might be shared between many other queries also affecting them.

BPS WIB - how to transport with correct URL in hyperlink

Hi all,
If I have a hyperlink in my BSP web interface (WIB for BPS)which references my BWD server, how do I make sure that when I transport to BWQ or BWP that the correct server address part of the URL is written in for the relevant system?
Thanks,
Rael

Hi Anil,
Thanks for the response. But I think you are talking about a WEB APPLICATION (BW REPORTING) type of URL, whereas my problem exists where I am using the WEB INTERFACE BUILDER in SEM in order to build planning web interfaces.........
I have a jump to the following URL within my planning interface:
http://hpks01v1.germany.glaxo:8010/sap/bc/bsp/sap/zbdew003/admin.htm
You can see the server is 8010 - our BWD server. But when this is transported to BWQ, it still looks the same and then the link jumps back to the BWD server (8010) and not the BWQ server which is (8080)....?
Or maybe I do not understand how to use what you have recommended properly?
Thanks and regards,
Rael

Transports on system landscape with no test environment

Hi,
Please share your experience about transporting from BWD to BWP. I have normally worked with BWD, BWQ, BWP, where we have the chance to test our transports on BWQ before moving the perfect changes to BWP. What precautions should I take when working and dealing with the landscape with no test instance?
Thanks
"Public opinion is a weak tyrant compared with our own private opinion. What a man thinks of himself, that is which determines, or rather indicates, his fate." ~ Henry David Thoreau, US Transcendentalist author (1817 - 1862)

Hi all,
Certainly I see and hear that smaller companies don't have enough funds to implement 3- system landscape, but I don't see why they would want to do that - better save money then and just do ABAP R3 reporting if all you will have is just implementing one module. Aren't you suppose to have sufficient funds in order to maintain and have SAP R3 and BW running? When they start wanting to implement more modules, then it will get clumsy and unstructured. They would have to spend more effort in doing the workaround and dealing with an unruly environment.
Thanks
"When the character of a man is not clear to you, look at his friends." ~ Japanese Proverb
"Nothing is easier than to denounce the evildoer; nothing is more difficult than to understand him." ~ Fyodor Dostoevsky, Russion Literaturer (1821 - 1881)
"Be smart and know who you're dealing with...But again who wants to" ~ Anonymous

Hierarchy transport

What is the general Procedure to move heirarchies from Development to Quality ant then to Production ??
Is it that we make the links that the Hierarchy is extracted from the corresponding R/3 system
like from R/3 Hierarchy table to BWQ
and R/3 Production to BWP
or
Do we do a export kind of stuff from BWD -> BWQ -> BWP ???
What is the general Procedure ?? and please it would be really great if you can give some steps to do the same ???
Thanks a lot,
GG

se09 - biw
create tranport - workbench req. - skip project name - note transport number
rsa1 - transport connection - collect objects - select pc - find the pc - move from left to right
grouping - collect necessary objects - hit transport bus with no bex
comes with a request - match req. number generated in se09
se09 - display request - req is modifiable in tree - select request - release task - release parent as well - get screen with status
go to production system - stms - click bus - choose bp2 - opens all transports - shows my req - click import icon ONLY my request -
import done - ready message.
check in rsa1 in production
se09 - bw
create tranport - workbench req. - skip project name - note transport number
rsa1 - transport connection - collect objects - select pc - find the pc - move from left to right
grouping - collect necessary objects - hit transport bus with no bex
comes with a request - match req. number generated in se09
se09 - display request - req is modifiable in tree - select request - release task - release parent as well - get screen with
status
go to production system - stms - click bus - choose bp2 - opens all transports - shows my req - click import icon ONLY my request -
check in rsa1 in production
ur topic has already been discussed here and the above is an excerpt for your ease.
Re: How to transport Hierarchies?
assign points if useful ***
Thanks,
Raj

Cannot transport transfer rules!

Hi,
We have a problem transporting the transfer rules from BWD to BWQ.
Here are the steps I did :
New object ZZRANK was added to user exit on R/3 dev. and transported
New infor object ZZRANK was created in BWD
ZZRANK was added as attribute to 0PLANT (mater data)
Transfers were created and comm struc updated.,
testing was successful in Dev, r3 changes were transported to Q and BWD transports to BWQ. ALL info objects transported successfull but the transfer rules failed. Cannot determine why.,
   Start of the after-import method for object type R3TR ISMP (Activation Mode)
   Mapping between data source 0PLANT_ATTR and source system PR2200LS is inconsistent
   Field ZZRANK will not be delivered from DataSource 0PLANT_ATTR in source system PR2200LS
   Mapping between data source 0PLANT_TEXT and source system PR2200LS is inconsistent
   Field KEY1 will not be delivered from DataSource 0PLANT_TEXT in source system PR2200LS
   Errors occurred during post-handling RS_AFTER_IMPORT for ISMP L
   The errors affect the following components:
      BW-WHM (Warehouse Management)
Any help is appreciated.

You may have to replicate your data source on BWQ.
First replicate and then send your transport again from BWD to BWQ.
Regards.
Sanjay
Message was edited by:
        Sanjay Sinha

How to delete released transport request

Gurus,
We are doing a system synchronization and for that we are going to make a system copy from BWP TO BWD. Hence I am told to delete all modifiable transport requests, which I did without any problem.
But in BWQ there are some transports which are already released and how I can delete them. They don't show under modifiable transports , rather they show under released transports.
(For your information in my company any transport released from BWQ does not automatically go to production, we have to send a manual e mail request with the transport # to basis. Therefore these transports even though they show released they will never make it to production as I have never sent release request to basis and these transport are of no use any ways.
So please guide me how to delete these released transports in BWQ.
Thanks
MK

Hi MK,
Goto Import queue of target system(T Code: STMS) and delete(Shift+F2) from import queue. or from menu --> Request --> Delete.
In this way it only deletes from import queue.
Hope it Helps
Srini

Error While Transporting Transformation

Hi Gurus, I have this issue that I am getting an error while transporting Transformation. I made sure that that only transformation is sected and nothing else. I am getting this error message while importing it in BWQ environment "Formula 4AY060939P5D2NKRXKMJFECLS is already locked in the requests of other users or the system is set so that formula 4AY060939P5D2NKRXKMJFECLS can no longer be changed."
I was wondering, if this is locked by some other object or transport request, how can I find that out? Thanks in advance for all the help.

Hi,
You can check if the request is locked by another transport in BWQ by using the transaction SE03.
First find the object directory entry for your object(you can take this from your transport. Go to SE03 --> 'Search for Objects in Requests/Tasks '. Under object selection enter the details as in your transport and select the check box against your new entry. Under Request/Task selection, select 'Modified' and 'Released'. Execute. You will now see a list of transport requests that contain your transformation. Check these & either release them or delete your object from the modifable transports. Re import your transport.
You can check if this object was locked by a person using the transaction SM12.
Regards,
Shilpa

Change source system name in variant in BWQ

Hi Gurus,
I created a process chain for global seetings for unit of measurement and fiscal year variants and transported to BWQ.
In BWQ, I found the source system name in variant is showing ERD source system name, but I need to change it to ERQ source system name. Any advice how to change source system name in variant in BWQ I would appreciate it.
Thanks
Liza

Hello Again Liza...
I had the same problem but I didn't need to include in process chain...
So to execute periodically you can change it in debug mode, not the best solution...
But since you need to use it in a process chain, you should copy that program to one of yours Z.
Do this:
Go to transaction se38 and insert the program name "RSIMPCUST".
Click on the button of "Copy" (Ctrl+F5).
Change the source program name to ZRSIMPCUST (or whatever you want)
Click Enter
Click the button to mark everything (F8)
Click Enter
On the next window of the name of the include click enter (leave it blank)
Click on the button Change of your Source Code
In line number 54 you'll find this in Selection Screen part:
PARAMETERS: logsys TYPE rsa_logsys MODIF ID p01.
PARAMETERS: logsysnm LIKE tbdlst-stext MODIF ID p02.
Delete those two lines and insert this ones:
PARAMETERS: logsys TYPE rsa_logsys.
PARAMETERS: logsysnm LIKE tbdlst-stext.
Now click on Activate button (Ctrl+F3)
Now you have a new program just like the old one but you can change the source system to whatever you want!
Please assign points,
Diogo.

How to terminate Transport on BI 7

Dear BIers,
When we're performing the TRANSPORT from BWQ to BWP, at the beginning the performance of the transport is horrible low, finally, there are tens of requests handed over with status 'Import Running', the Truck.
1. How to improve the performance of transport.
2. How to terminate the 'Import Running' transporting.
Any suggestions are appreciated.
B.R
Gerald

Hi Gerald,
If the status indicates that tp is still running, there may be several reasons:
--> TP is processing a request with a large data volume.
--> An error has occurred. In this case, you can find further information in tp system log.
--> TP was terminated with operating system tools. Therefore, check if the tp process with the process ID displayed is still running.
The Import Monitor displays all tp processes that terminated or have not yet been completed.
To start the Import Monitor:
Call Tcode: STMS.
Choose Transport button. The import overview appears.
Position the cursor on the SAP System for which you want to start the import. If you do not select a system, the monitor automatically displays all systems in the domain.
If you only want to display a particular group of systems, choose Extras --> Personal Settings and enter the systems under System list.
Choose Goto --> Import monitor.
To update the display, choose Refresh button.
You can use the context menu to delete individual entries, display import details and their transport steps, and go to the import history.
To terminate transport proposal:
http://help.sap.com/saphelp_nw04/helpdata/en/c4/08feede2af11d2b41d00609419f767/frameset.htm
Check this link too:
http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a4547acc11d1899e0000e829fbbd/frameset.htm
Hope these helps u...
Regards,
KK.

Use an existing request in transport connection

Hello
I want to add objects into an existing transport request with transport connection.
How can i do?
Can i create a new one from transport connection but not transport it automatically? only insert objects inside it.
Thanks.

Dear Fernando Ariel Gonzalez ,
I think we can..
Please go through the steps below,
1. Go to rsa1 -> business content
2. Choose 'grouping' as "in dataflow afterwards"
3. choose 'collection mode' as "collect automatically"
4. choose 'infoproviders by infoareas' - choose appropriate infoprovider and 'insert objects for collection'
5. Select your query / queries
6.choose 'create transport request for BEx' and select appropriate development class
To Release a request....
se09/se10, 'modifiable' is marked, and 'display', cursor on you request and click truck button (release),
if request has 'child' request, need to release it first.
To delete or remove request
Goto SE03
Requets/Tasks > Unlock Objects
Give the Request num & Execute
Now Delete the Request on SE09
It is possible to rmove before transportataion from SE03. Well if you want to remove from after transportation it can happen in a case like this. While you delete the obect in dev, it should ask for a request and when that request is transported the object will get deleted in the target sys too.
For more information....
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
/message/1257362#1257362 [original link is broken]
Re: How to collect & transport new cube & new update rules
Re: Transport to BWQ issue?
Re: Transport a query from BWQ to BWP
Hope it helps you,Revert me back if you have any queries
Regards
Bala

Conversion of logical system

Hi,all,
I have 3 BI box - BWD, BWQ, BWP, and 3 R3 box - R3D, R3Q, R3P, before I transport datasource, infopackage from BWD to BWQ, I configured the conversion of logical system in BWQ as: BWD -> BWQ, R3D -> R3Q, that works fine, So before I transport to P, how should I configure this mapping in BWP: BWD -> BWP, R3D -> R3P or BWQ ->BWP, R3Q -> R3P?
Thanks a lot.

Hi,
You can input all four or you can input the combinations going from your Q to your P system. Both will work...
-Jacob

Issues with object maintenance on development system

How would you maintain your BW object development - backend and frontend - on BWD system after they have been transported and imported to BWQ? That is how would you prevent the last recently imported objects from getting changed for no reason at all?
We have a situation where we transported and imported all recently changed development from BWD to BWQ, and the objects now have been changed to something else not matching from what we had transported to BWQ. The changes were not called for per our user's requirement. In order to fix this we would have to check all obejcts from BWQ and then to correct them on BWD back to the way they were last transported.
We are validating the data on BWQ and we would not want to redo the development again to revert back to their orginal state. We would want to ony make correction from what we last transported.
How can this be resolved? Could we put authorizations access to certain objects based on who has developed it on BWD to control the changes on BWD and transports to BWQ? Is this how it would work?

Really... Basis folks take things so personal. They're touchy, sensitive, and always annoying . Surely I wouldn't want to make friends with Basis folks. I'll be polite and cordial but it doesn't mean I like them. Besides they are the ones to support the developers and they must do what I say.
Another approach to this would be to copy client BWQ to BWD.
Those Basis folks better do some work besides complaining and find faults at others.
It's get itchy when they start complaining. They would give me a butt cringe...

Transports BWD - BWQ !?

Similar Messages

Maybe you are looking for