Trimming end of clip causes some of frame to be chopped off

Ok, I'm new to Premiere Pro (have been using it for the last week as part of my job) but have so far managed to pick up the basics. In the last sequence I edited, I have had a problem with trimming. I have tried trimming the end of the clip (which is at the end of the sequence) and it ends up with a small part of the frame chopped off the side. I've been searching online and can't find anything like this. Any suggestions on what might be causing this? I bet it is probably me being stupid/a newbie, but for the life of me, I can't work out whats up with it...
I'm trying my hardest to pick this up on my own, but I've spent a day fighting with this now, and there is no one at work who can help (I'm resident techy on my project...)
Thanks very much
Hannah

You will find there are some very strong views about this from some members of this forum

Similar Messages

Repeated Frames at the end of clips

I have a MacBook Pro with the adobe premiere pro cc 14, but I noticed this problem is CS6 also. The problem is this: Say I have two clips in the timeline that are connected (Clip A, Clip B).
If I alter Clip B in anyway (change scale or position, or simply remove it from the timeline) the first frame of Clip B will remain at the end of Clip A. So, when I execute the playback function I can see a quick flash of Clip B at the end of Clip A.
Here's what I've tried:
I tried rendering the files--didn't work.
I tried simply trimming the repeated frame off--didn't work.
Here's what did work.
There's a straight line that goes through every clip, I don't know what its called but I think it has something to do with the speed, I would drag that from say 100 to 96.55. The video would have the red render bar above it, and the repeated frame would disappear.
HOWEVER, in my current project I have serval repeated frames in a blank space where there are video clips, so the previous method can not work.
What the heck!?!?!
Thanks

What are these clip exactly
Please post a screendump in treeview.
MediaInfo Mac

Video freezes at the end of clips.

Hi, I have encountered strange glitch. I have put many short clips into project, with straight cut, no transitions between. Some of clips doesn't follow seamlessly - video freezes for about 1sec at the very end of clip but I can hear audio from following clip and after that 1sec freeze video continues with audio. Therefore I "miss" that 1sec of video from the beginning of the clip. It happens only with some of clips and sometime I can sort it out with slight trimming. But mostly cannot.
What am I doing wrong there?

If you go into iMovie Preferences, make sure you select "Display Time Codes" as hh:mm:ss:frames.
By default, iMovie edits to the nearest 10th of a second, but by checking this parameter in preferences, you can edit to the nearest frame.

Looping from end of clip to middle of clip

I'm a complete newbie regarding Flash development, but I've
been tasked with automating SWF creation from an AVI source (and
quickly!). Once the SWF is finished playing it should endlessly
loop from the last frame to about 5 seconds prior to the end frame.
Think of a speaking character, followed by some idle movements. We
want the idle movements to endlessly loop.
What I've done/need to do is:
1) Automate the creation of the AVI. Done.
2) Convert the AVI to SWF (using FFmpeg). Done.
3) Write Actionscript to detect the last frame, and then jump
to some other frame.
4) Merge the SWF with the actionscript and produce a new SWF
which is then placed on a website.
Being a newbie to Flash, I'm overwhelmed by the array of
options out there for something so simple in concept. I'm looking
for a command line solution so everything can be completely
automated. My questions are:
Can steps 3 & 4 be done with the FlexSDK?
What would the steps be to get something like this
accomplished?
Any help would be greatly appreciated. Thank you.

Ok, after a bunch of learning and experimenting I've come up
with the following code. It is the entirety of the program. It
loads the clip, and the clip will start playing, but I cannot
control it at all. stop() or gotoAndPlay() won't work. AddChild()
start the clip playing, but after that it just goes on its own. It
also appears that .currentFrame isn't accessible either, as it is
always zero.
There isn't a whole of lot of documentation regarding
embedded assets and how they can be controlled. Does anyone know if
its possible to control the frames/timeline of the embedded
movieclip? Thanks.

Subject : Slideshow looks bad Hello guys I have a project in my Final Cut just about done. I want to add my slideshow as part of the project and burn it to DVD. In my slideshow, there are some stills from the movie clips and some downloaded from the i

Subject : Slideshow looks bad
Hello guys
I have a project in my Final Cut just about done. I want to add my slideshow as part ofthe project and burn it to DVD. Inmy slideshow, there are some stills from the movie clips and some downloadedfrom the internet but they all look blur when playback and even worse if Iapply Ken Burn to it. Pleasesome one can tell my how to do it right or it can’t be done because thedownload quality and stills from the clip are not suitable or slideshow. Thank you
PSC

Thank you Ross.
The entire DVD containing Quick Time movies (Final CutExpress project) and slideshow was done in iPhoto. The Final Cut project was rendered prior to export to QT, the slideshow was sent to iDVD withoutrendering. The slideshow with most of the pictures from my still camera incombination with stills from movie clips and some downloaded from the Internet.After burning, the movie playback is perfect but the slideshow is not. The slideshow containing 3 differentkinds of pictures; those from my still camera looks OK; the stills from themovie clips and from the Internet are not. I don’t have much knowledge in this game, but I think NTSCwith frame size 720x480, and the downloaded picture Item Property shows most ofthem are between 400 to 500 x 300 to 600, may be both of them are not suitablefor TV screen while the stills from my still camera looks OK because they are2048x1536. Please enlightenme. Once again, thank you so much,I really appreciate the time you offered.
psc

Trim a .mov clip without creating iMovie project

I would like to trim a video clip that I have in iMovie and iPhoto. I just want to shorten the file and save it. I do not want to make it into a iMovie project. I know this can be done on iPhone. Can it be done in iMovie or Iphoto or by some other simple free software?
I am running iMovie 10.0 and iPhoto 9.5 on a iMac with Mavericks.

There is free software called MPEG Streamclip from Squared 5 that will do this.
I think you can also do this in QuickTime Player X, but I have not tried it myself.

Moving Audio Clip less then 1 frame in Premiere

Is it possible to move an audio clip less then one frame in premiere CS4. I recorded and then remixed in Audition 3. Live concert was also recorded in HDV on a Canon hv30. I want to use the remixed audio with the video footage in place of the camera audio. It was recorded hdv 30P so one frame is a significant amount of time from the audios point of view. The audio and video are about half a frame apart. The only thing I can think of is take the audio back into audition and shorten the lead in by the required amount. I was hoping for a easier way.
Any thoughts would be greatly appreciated.
Ken

Ken,
Glad that it did work for you. Now, there are still some frame-specific things that can and cannot be done, as PrPro is frame-based, but for your need, it sounded like a good solution.
Thanks for reporting success,
Hunt
PS so you can mark your question as having been answered, right?

Moving keyframes at end of clip?

Is there anyway to move a keyframe that is at the end (or beyond the end) of a clip? (in the effects control window) Often, keyframes at the end do not even half show within the effects control window.
Certainly, keyframes at the end of a clip should be easily selectable and movable.... and it would be nice if keyframes beyond the end of a clip had some kind of interface, rather than just not showing up without extending the clip.

Snapping cursor line to end of clips

I recently upgraded from 1.5 to 3 and for some reason by default the play line thing doesnt snap to the end of clips automatically. Does anyone know how to find the option that will allow that line, i dont know what its called, the line that scrolls past the clips when you hit play, how to make it so that when you click hold and move that line it automatically snaps to the end of the clip when it passes it?

Maybe you need to turn on the relevant Snapping option, Snap to Clip. They appear in a drop down menu when you right click on the Timeline at the bottom of the screen.

Popping sounds at end of clips

Hey
I'm using Audition CS6 (windows) and I'm getting these click/pop sounds at the end of clips in multitrack. If I open the individual clips up to edit and play it through there isn't any sign of it. However if I play the clip through in edit mode and stop it near the point where the pop is I will hear the pop when I hit stop. The irritating thing is if I do a mix down these little errors are still there and they are pretty loud!
Any idea what could cause this? I'm using windows 7 and Cs6.
G

Without seeing the waveforms and/or hearing what you've got this is a complete shot in the dark -- and probably unlikely since it sounds like this is happening to multiple files and not just one but:
1) Does the audio in your clips end with the waveform much above or below 0 amplitude? (You need to zoom in extra close to see if this is the case) If your wave stops too far above or below the line, and then suddenly drops to 0 as it's playing through in a mix it can cause clicks.
2) Do you have the gain boosted on these clips anywhere in the multitrack mix window? If so, maybe you've got a click in the wavefore that's not too noticeble when playing in the edit window, but boosting the gain in the multitrack makes it more noticeble.
~Dave

I can not Trim Original Video Clip

There used to be two options when trimming a video,"Trim original and T"Save as New Clip", for some reason I'm not seeing the option to trim the original video. What happened, did I change the settings in my Icloud, or has this feature been removed?
I have an IPhone 6 plus with all updates with the largest capacity. at the time.

Wondering myself-the option just disappearEd and is a minor annoyance.

No option to make soft sub clips by unchecking "restrict trims to sub clip boundaries"

I'd like to be able to make soft sub clips, but the box with the option to "restrict trims to sub clip boundaries" is not showing up when I go to make a sub clip. I am only given a box with the sub clip name and the the option to "cancel" or select "ok". I've tried to make the sub clips using keystrokes and my mouse, but neither way ends up with a sub clip box where I have the option to unclick the "restrict...boundaries" option.
I am using Premiere Pro 6.0.5 on a Macbook Pro.
Any help is much appreciated.

That option was added in CC7.0.

Needs help adding images to movie clips and referencing the frames

i havent started with a blank, script made movie clip.
I want to add frames from action script 2, and be able to
reference/show the induividual frames for a video game and not a
movie. I dont realy need animation, i just need certain frames to
show, that i want to load load(from a non script made movie clip
with one loaded frame(bitmap data).

you can't add frames to a movieclip using actionscript. so,
if that's what you're trying to do you'll need to find some other
way to accomplish your goal.

Playing a movie clip in a simgle frame

I'm making a flash gallery of several different animations,
each being in one movie clip. I was wondering if there's a way to
make a whole, say, 1000 frame movie clip play in a single frame on
the main timelime, and how it would be done. (assuming that the
main timeline frame has the actionscript to make the movie stop)
I'm kinda new to actionscript and all, even though I've been
working with flash for a while, so it would be a real big help for
this project and future ones.
-EDIT-
I'm using AS2 for this project.

It helps to realize that even the main timeline is a
MovieClip instance.
MovieClips play independently of one another, and can be
nested. So if you
just take your 1000 frame clip and place it on a frame (any
frame will do)
it will play - so long as the play head of the parent clip is
on that frame.
And you said you have a stop(); on the main timeline, so I
assume it is. So,
like kglad said, just put the clip on stage...
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

DPS: pinch and zoom function not working on all pages within folio (v30 tools using the pdf setting). What would cause some pages to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer?

What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

Trimming end of clip causes some of frame to be chopped off

Similar Messages

Maybe you are looking for