Unable to transport transfer rules in BI 7(Partition in PSA)

Hi,
I want to activate T.R in Production but not able to that due to Partition in PSA.
Errors accessing partition parameters for table /BIC/B0000341000 (-> long text)
We used the programmed called RS_TRANSTRU_ACTIVATE_ALL but still the same error.
Even when we transported (T.R) from QA to PRD not able to transport to PRD with error 8.In the error analysis it is giving the same MSG u201CPSA partitionu201D
T.R: Transfer Rules
Object Type: Master data Text(0ACTIONREAS_TXT)
Thanks,
Gattu.
Thanks= Points in SDN

Laxman,
Try to repair PSA table at RSRV --> All Elementary Tests --> PSA Tables --> Consistency Between PSA Partitions and SAP Administration Information##.
After repair try to activate.
If still not working, then empty PSA data in production system (if not required...) and import transfer rules and activate if required.,
Hope it Helps
Srini

Similar Messages

Transports(transfer rule)Problem

Hi Experts,
Bi Patch :16   BI_CONT :8
We are moving from DEV to QA.i ve transported infoareas,infoobject catalogs and infoobjects.
now im trying to transport master data infosources UR and transfer rules.
im collecting the objects in the following manner.
Ex:0material
Grouping :in data flow before
collection mode : automatic
Here im unable see the transfer rules but UR and infosources are there.(in transport connection screen)
Conversion of logical system names
in Dev i didnt maintain any thing
in QA i ve mainted Conversion of logical system names as
*Original S S            Target S S
BI DEV                     BI QA
R3 DEV                    QA DEV
I havnt chkd the box 7.0.
Assgnment of source system to source system id
here i clicked on suggest source system ids
i ve AU and AU.
Even i did a trail with transporting the request to QA but no luck it ended with error 4,but not getting anything even info source or UR etc.........
Plz help me,suggest me solution its very urgent.
Thanks,
Yunus

hii check the foll links and award some points
Re: Transfer rule error
Re: Transfer structure problem

Error when transporting transfer rules

Hi, i got an error when i transport transfer rules. i got the following errors in various transfer rules:
Mapping between data source 0CUSTOMER_ATTR and source system EMP300 is inconsistent
AND
Reference to transfer structure 0CUSTOMER_ATTR_BB not available. No activation possible.
I tried to activate the data sources and transport them several times, but i got the same errors. Checking manually i can see the data sources active in my source system, in development and productive instances.
Thanks in advance.
Diego Lombardini

Hello Diego
Do you choose the correct Transfer Structure in DEV?
I mean the one that is assigned to EMP300.
Are you saying that your PROD have the following:
0customer_text_BA
And that your DEV only have the following:
0customer_text_BB
If the answer to the above questions is YES;
Find out if some one has assigned ATTR to 0CUSTOMER directly in PROD or somebody has changed 0CUSTOMER_ATTR in DEV without transporting it to PROD.
I think that one way to resolve this problem is to use the option "overwrite origanls" in STMS.
Use it with caution and do not mass transport when you use this option.
Good luck
/FZA
Message was edited by: Fariborz Zangoui
Message was edited by: Fariborz Zangoui

Problem while transporting transfer rules in BW 3.5

Hi All,
I have a problem while transporting transfer rules in BW 3.5.
I have just checked the box for conversion to Transfer structure / Transfer rules of an infoobject and tried to transport it to quality. I got this below error message:
The selections T ZBW_ZBILLRATP_TEXT_BA specify more than one DataSource
Diagnosis
You need to select an individual DataSource based on the selection conditions
InfoSource =
Source System =
Object Version = T
Transfer Structure = ZBW_ZBILLRATP_TEXT_BA
although the select event is not unique.
Procedure
Check the objects to which the selection applies.
Reference to transfer structure ZBW_ZBILLRATP_TEXT_BA not available. No activation possible.
Message no. RSAR436
Diagnosis
Transfer structure ZBW_ZBILLRATP_TEXT_BA should be transported into this system.
However, no DataSource mapping refers to this transfer structure.
System response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer structure ZBW_ZBILLRATP_TEXT_BA is on the same transport request. Use the transport connection to create a consistent request.
Can any one provide me details of how to overcome this issue. I tried transporting all related objects.
Regards
Lakshmi

Hi Lakshmi,
Befor Transporting the Transfer rules, make sure that you are transporting the Active Versions of your Datasource & DataTarget between which your transfer rules exist.
Also make sure that the Transfer rules are active before it is transported.
Hope it helps!
Regards,
Pavan

Error in Transporting Transfer rule/structure to Q for generic DS

Hi,
We're in NW2004s. we're getting error when we transport Transfer Rules and Structure of generic data sources to Q.
In R3 Q the DS is active and it pulls data in RSA3 and it is replicated and all the fields are available in BW side as well, but when we transport TR/TS i still get error saying the Datasource is not active. This happens only for generic ones.
Any idea.
thanks
Mayil

Hi,
have you inserted both the transfer rule and the communication structure in the same change request?
When you transport an InfoSource, all it's dependent objects must be present in the same change request; in this way the datasource will be activated.
I hope it helps you,
Vito

Unable to find Transfer Rules and Data Source for 0PERSON Info Source

Hi,
I'am working on SALES ANALYSIS Configuration with the help of SAP Best Practices.
I'am trying to load Master Data Attributes/Texts/Hierarchies.
I'am able to load for allmost all the InfoPackages which i created for particular DataSource.
Now i need to load master data for 0PERSON InfoObject under that Person (Attributes) and Person (texts) are there,for this 2 Transfer Rules and the DataSource has to be defined by default as it is defined for other Attributes/Texts/Hierarchies.But i'am unable to find a DataSource and Transfer Rules to create a infopackage for PERSON Attributes and Texts.
Please gudie me with a solution in order to get these Transfer Rules and DataSource for this Attributes and Texts.
With regards,
Pradeep.B

Hi,
Install the corresponding master data objects from Business content. Go to data source find out the needed datasource, replicate it. If you want you can migrate it also.
If still you are not getting 0person masterdata object datasource & transformation structure, then you have to create the transformation, Infopackage.
Hope if you will install the business content again, it will solve your problem.

Cannot transport transfer rules!

Hi,
We have a problem transporting the transfer rules from BWD to BWQ.
Here are the steps I did :
New object ZZRANK was added to user exit on R/3 dev. and transported
New infor object ZZRANK was created in BWD
ZZRANK was added as attribute to 0PLANT (mater data)
Transfers were created and comm struc updated.,
testing was successful in Dev, r3 changes were transported to Q and BWD transports to BWQ. ALL info objects transported successfull but the transfer rules failed. Cannot determine why.,
   Start of the after-import method for object type R3TR ISMP (Activation Mode)
   Mapping between data source 0PLANT_ATTR and source system PR2200LS is inconsistent
   Field ZZRANK will not be delivered from DataSource 0PLANT_ATTR in source system PR2200LS
   Mapping between data source 0PLANT_TEXT and source system PR2200LS is inconsistent
   Field KEY1 will not be delivered from DataSource 0PLANT_TEXT in source system PR2200LS
   Errors occurred during post-handling RS_AFTER_IMPORT for ISMP L
   The errors affect the following components:
      BW-WHM (Warehouse Management)
Any help is appreciated.

You may have to replicate your data source on BWQ.
First replicate and then send your transport again from BWD to BWQ.
Regards.
Sanjay
Message was edited by:
        Sanjay Sinha

Unable to activate Transfer Rule

Hello Experts,
I am not able to activate Transfer Rule in my System ( BW 3.0).
I have written one routine and then when I am trying to activate I am getting below error messageu201D
Object 0NOTIFICATN_ATTR object version not found in table.
My Data Source name is 0NOTIFICATN_ATTR.
I have also tried to activate by using RS_TRANSTRU_ACTIVATE_ALL but still no luck.
I also checked table TADIR and I can see entry over there.
Regards,
Pankaj Naik.

Hi Pankaj,
Try to activate the transfer rules by executing the SE38 report - RS_TRANSTRU_ACTIVATE_ALL.
Also check the note - 884385 , For 'RSAR' errors while activating update and transfer rules.
Regards,
Lokesh

Transporting Transfer rules

Hi All
Trasnfer rules are source system specific. In development say we have created them for BW-Dev to R/3 Dev. While transporting them to production. How will we change the assignment from BWDev-R/3DEv to BWprod-R/3 Prod.
Thanks PB

You are right,
but if you want to transport anything directly to your production environment you have to build a consequent landscape...where is your problem ?
We are talkin'about source system mapping assignment, but starting from the assumption that you can do this type of transport accordingly to your landscape !
Bye,
Roberto

Urgent....Transported Update rules active version but still not active....

Hi Gurus,
i have changed a datasource and an ODSA
and this ODSA which also acts as a datamart to ODSB
so i have transported, transfer rules, transfer structure, infosource, update rules of ODSA and also the
update rules of ODSB as well
And before realsing the request into quality i have replicated the datasource from R/3 as well and then realsed this request to Quality everything is active like transfer rules, infosource, transfer structure
ODSA update rules
But the ODSB update rules are not active kindly tell how to make them active.
so again i have regenerated the export datasource and then again i transported only update rules of
ODSB.
but still the update rules are inactive, kindly someone guide me how to make them active
as i have to send this to production which is having 4 years of historical data so please kindly
help me.
thanks and regards
Harish

Hi A.H.P, vishvesh, anil, and buvanna
thankyou guys for your info and support i tried all that u have said
except activating them manually...as it is urgent i am going with manually activating
and vishvesh i could do check the update rules by basis help. thanks for that
A.H.P i have manually activated the update rules its working fine, so i am praying that everything should be fine in production as i have requested to have permissions to activate in prd as well
thankyou very much for all the support.
i am relieved that i have at last solved it
thanks and regards
harish

Transfer rules sourse system assignment change

Hi,
XAD -- Global APO system
AAD -- America APO system
GBD - Global BW system
ABD - America BW syste,
I transported, TR,Comm STru, UR from XAD to AAD
In XAD TR,Comm Str,UR pointed to GBD,
where as now i need TR,Comm Str,UR to point to ABD
when i double clieck the transported Transfer rules in AAD, i am getting error GBD doesnt exist
BDLS doesnt work here as ABD is already created in AAD
Looking for experts advise
Thanks
Praba

Hey. Do you have the system mappings maintained in AAD to convert GBD to ABD when transporting/importing updates? In the admin workbench it's just tools-conversion of logical system names. I'm guessing that's all it is. Have you ever transported from XAD to AAD? If not, I'm sure that's the issue.
Hope it's helped.

Transfer rules not activated

Hi Guys,
This is Venkat, unable to activate Transfer rules.It doesnot Showing any errors while activating the Transfer rules and also in the DISPLAY LOGS.But while trying to transfer the field(0crm_guid)from assignInfoobjct-field by using propose transfer rules spindle to Communication str/Transfer rules it was not allow this field to transfer into the transfer rules.After activating it was showing the message Transferstuctute was activated.
could u Pl help me .

Hello Venkat,
you made a detailed description. I just don't know, which transfer rules you mean. Which transaction code you are using?
Regards,
Christian

Error while activating transfer rules

Transfer method 'TRFC with PSA' is not supported by the source system
Message no. RSAR508
Diagnosis
The PSA transfer method is used to transfer data from source system GBQ480 to transfer structure 0ASSET_ATTR_G4. Source system GBQ480 does not support a PSA transfer.
Procedure
Define the PSA in the source system.

Change Transfer method to PSA in Transfer rules and then activate. If PSA is selected, you will not face this error.
If you still face this error even after changing Transfer method, check below thread.
Transfer method 'TRFC with PSA' is not supported by the source system
Edited by: koundinya karanam on May 22, 2008 12:47 PM

Unable to find the Transfer Rules in Transport Connection

Hi Guys,
I am on BW 3.5.
I am unable to find the Transfer Rules created in transport Connection. I need to Transport these changes. I was able to Transport Communication structure and the Infosource.
I tried activating the Transfer Rules and also replicated the datasources but it does'nt prompt me for a Transport request.
Hence I need to explicitly Transport by going into Transport Connection where I am unable to find the object.
Please help me on how to include this object in the Transport request created.
Thanks in advance.
Regards,
Tyson

Another way is to go the transfer rules or update rules or any object which you want to transport->extras on top>Object direct entry>change the package from $temp>rest you know
Cheers,
shana
Assigning pts is the way of saying thanks in SDN

Transport Error while moving Transfer rules - RS_ISMP_AFTER_IMPORT for object type(s) ISMP ( )

Hello Experts
Strucked up with an issue while transporting the Transfer rules that are created for an UPFILE source system.
Transport is included with list of Data source Replica, Transfer rules, Transfer structure and Info Package.
My data Source : ZVPRCRDT for an UPFILE
Below is my error screen :
Tried to resolve the error by moving the Data source Replica as an individual Transport.
Still see the same error and my data source is active in the current system.
Looking for a resolution to find out the root cause.
Any help is appreciated...

Thanks for your response Ram.
My Source System UPFILE is in active mode.
Unsure why system is throwing error as source system assignement was inconsistency.
All fields are mapped perfect with one-one relation.
Worked by reassigning the UPFILE - source system to the data source but still i m seeing the same error : Data Source doesnt exist in source system of version A.
Transported the DS alone to Quality initially where i m unable to find the transported data source in my quality(target). DO i need to perform replicate meta data ...something like that in quality so that imported data sources will get refreshed?
If so can you let me know the approach.
Thanks

Unable to transport transfer rules in BI 7(Partition in PSA)

Similar Messages

Maybe you are looking for