Unable to view chinese properly.

im unable to view chinese text extracted form DB properly some characters appear as square while others appear fine. can anyone try to decode this chinese simplified string of text and see if they can view it find. i can see the last character of it.
��
insertion is done by VB into mssql. how i extract and view is by using
u_desc = rs.getString("text");
desc = new String(u_desc.getBytes(),"UTF-8");
ive tried lots of other methods but they jsut would display properly... only some characters are displayed properly...

try searching these forums, there are a dozen posts just like this every day

Similar Messages

Will my phone become unable to view chinese word a...

i have a nokia c3-01 and current version is 5.6,newest one is 6.0,last time i upgrade my other phone and its become unable to view chinese word,but last time i upgrade using connect to com method,now i wanna update my phone using the software update button,after upgrade can my phone continue view chinese word?

What you are referring to is non-official methods of updating the phone, which we are not at liberty to discuss here. If you wish to update the phone officially, you should retain your installed languages, but if you don't after the update using Nokia Suite, then read this thread here: http://discussions.nokia.com/t5/Software-Updates/Language-changed-or-missing-after-software-update-s...

Im unable to view chinese and japanese characters on some sites

When I browse Japanese and Chinese websites, the characters do not load. Instead I get weird characters.
I have tried several character encodings but they still do not work
Please help!!

Seeing the following sites might be helpful-
http://support.mozilla.com/en-US/kb/Firefox%20will%20not%20display%20East%20Asian%20characters#os=win&browser=fx4
http://www.jp41.com/firefox/Chinese/

Unable to view images in the crystal reports on a jsp

Hi folks,
I am unable to view any image (not even the ones like businessobjects logo) in the crystal reports fetched from the CMS. I am able to fetch the report properly. But I don;t get to see the images in the reports.
If anyone of you know how to fix it. Kindly post it. It's urgent.
PS: It would be great if you could kind of share a check list of things that need to be taken care of while viewing a crystal report with images.

Hi Suresh,
Please check that you have crystalreportviewers11 (for version XI) or crystalreportviewers115 ( for version XI R2) folder in your BO installation and your web.xml has correct reference to it. You can copy this folder over in your web application and
Add an entry in web.xml as follows ( if it doesn't exist)
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>/<your application name>/crystalreportviewers115</param-value>
</context-param>
crystalreportviewers11\115 have images folder which contain all the images for Logo and toolbar. Check the images folder in viewers and make sure that they exist.
-Aasavari

Unable to view pdf created in Live Cycle Designer ES2-initially thought to be a user/OS issue

Unable to view pdf created in Live Cycle Designer ES2. I initially thought this was a user / OS issue when I created a document for someone who is new to a MAC laptop. She could not view the document through email. Unfortunately, I began seeing the same error in my own document folders when searching for another document showing as icons instead of a list. I can open the file without a problem although I see the error she sees only while viewing the icons in my folder. I am using a Windows 7 PC. Now, I also know that if the document is downloaded, it can be viewed.
Other notes:
If trying to access the form via the internet, the same error is seen through Chrome, Firefox, and Mozilla but NOT through IE
Everyone seems to have the latest or a very recent READER
The form is compatible with Reader versions 7 and up
Again, downloading from the internet to the computer appears to allow the file to open properly
Document cannot be viewed on the Galaxy Tab 2 via Chrome or the pre-installed Internet Browser, nor can it be viewed through the Reader after download to tablet. I did not try on an Apple iPad.
All parties involved are up-to-date with virus protection.
Below is a link to the exact message received when trying to open the document.
https://www.dropbox.com/s/wmjqzwyriovg9vi/Adobe%20Error.pdf

You're on to something KJ! Yes the form was created in LiveCycle Designer ES2 which came bundled with my Adobe X Pro. I began creating a new form yesterday and found that I could not preview the form, rendering this same "error" instead. I ran a repair on my Adobe and at first it seemed to fix the issue but after making some changes to the form I tried to preview again and couldn't. Here is what I get when I try to preview my forms in Designer ES2:
When I click the OK button, it then gives me that single static page as mentioned above in previous posts.
I searched Adobe yesterday trying to figure out how I could repair the LiveCycle Designer or if there was some sort of patch that I haven't gotten but was not able to find anything.
(Sorry for the delay in response, I've been on vacation.)
Message was edited by: AngelaC

Unable to view pdf - initially thought to be user / OS issue for new user to MAC.

Unable to view pdf created in Live Cycle Designer ES2. I initially thought this was a user / OS issue when I created a document for someone who is new to a MAC laptop. She could not view the document through email. Unfortunately, I began seeing the same error in my own document folders when searching for another document showing as icons instead of a list. I can open the file without a problem although I see the error she sees only while viewing the icons in my folder. I am using a Windows 7 PC. Now, I also know that if the document is downloaded, it can be viewed.
Other notes:
If trying to access the form via the internet, the same error is seen through Chrome, Firefox, and Mozilla but NOT through IE
Everyone seems to have the latest or a very recent READER
The form is compatible with Reader versions 7 and up
Again, downloading from the internet to the computer appears to allow the file to open properly
Document cannot be viewed on the Galaxy Tab 2 via Chrome or the pre-installed Internet Browser, nor can it be viewed through the Reader after download to tablet. I did not try on an Apple iPad.
All parties involved are up-to-date with virus protection.
Below is a link to the exact message received when trying to open the document.
https://www.dropbox.com/s/wmjqzwyriovg9vi/Adobe%20Error.pdf

Sorry, this is a user to user forum and we're just customers who help out when we can, so things don't always happen right away.
Reader, Regardless of OS or device, is as the name implies, only a Reader. There are different mail settings between Mac Mail Outlook and Thunderbird as well as Andsroid's mail app, whose name escpoaes me.
Have you checked in the Live Cycle Forum? There are people there with FAR more experience using LC developed forms. It's part of my Creative Suite, but I've never even opened it myself.

Certain countries are unable to view iWeb's blog, etc.

Hi,
I've been using iWeb for a while and I chose to keep a log for business with this product. I can't seem to locate a way to contact apple about iWeb so I hope I can get advice here. Many countries outside of the US are able to view the entire iWeb project that I've been working on, lately, it has come to my attention that a few key countries are unable to view and/or subscribe to rss. France/Netherlands/Spain in particular are unable to view the mobileme or apple set up. I have this set up on a personal domain, properly and people in the USA are able to view everything. What can be done? Do I keep iWeb as the news generator? I'm not sure what to do.
www.madonnaremixes.com is the domain for iWeb's logging.
How do I fix this?

I've had several people, mostly in France (a couple others) who say "I'm unable to see this site."
Are you totally sure these people are using the correct url? You could ask them to email you what appears in the browser address bar and the exact error message they are seeing.

Unable to view foreign characters in microsoft word on Macbook

I'm using Microsoft Word on my Mac OS X 10.5.8, and when downloading forms with chinese characters, upon opening the document I'm unable to view the foreign characters. What appears are squares instead. Can anyone help me with this?
I already have set up the 'languages' setting where I'm able to switch between english and chinese simplified characters so I can TYPE using foreign characters, but some how I can't view it on downloaded docs.

I'm using Microsoft Word on my Mac OS X 10.5.8, and when downloading forms with chinese characters, upon opening the document I'm unable to view the foreign characters. What appears are squares instead. Can anyone help me with this?
Try opening your stuff with TextEdit or OpenOffice.
What version of Word are you using?
A forum devoted to Word problems is here (but you must always tell people what version, it makes a lot of difference):
http://www.officeformac.com/ProductForums/Word/

Unable to view saved queries in Favourites

Hi Experts,
We have few users using Bex. They can successfully save queries in Favourites, however when they are trying to open the queries saved in Favourites, they are unable to see anything. That is they are unable to view their saved queries under Favourites.
From Backend perspective they have SAP_ALL and SAP_NEW. Please suggest what might be the issue here?
Thanks
Deb

Hi,
Thanks for your inputs, No issues found in the Gateway Logging.
The SAP Note 1031850 doesn't seem to be relevant here as we are on SAP_BW component version 701 and the note talks about components 700 and 710.
I don't know whether I am able to explain the issue properly; Users are able to save queries in their Favourite Folder by putting an XYZ technical name to it. However after coming back to the Analyser, they are unable to view any saved queries in their Favourite Folder. Interestingly this is happening in the QA environment while in Dev everything is fine.
Thanks,
Deb

WVC80N - Internet Gateway UPnP discovery failure message \ unable to view over the internet

I have the WVC80N. I recently got the new Comcast modem \ wifi but the Wifi is junk and had a lot of problems (loss connection, range etc) so I had Comcast "bridge" it so I just use my old wifi (LinkSys E1200). I have TZO to handle remote viewing. Everything was working great for about two weeks and we had a power outage. Since then, I have been getting UPnP discovery message (in the status tab of the WVC80N camera site) and I am unable to view over the internet. I get a 502 error usually but today I got extra info: "The socket connection to www.dfgehring.mylinksyscam.com failed.
ErrorCode: 10060. A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond."
I had Comcast do a "repair / reset" transmission to the modem and still get the problem.
I found these step on the forum:
1. Home Wirless Rounter administration page, find the UnPn settings and Turn off UnPn and save it. Wait for atleast 30 sec and go the same page and Turn it back on.
2. On your wireless camera Adminstraion page, go to "Options" and find the UnPn if it is already disabled go ahead and "enable" it also "enable" the "Alternate web connection" and save it. If it was already enable please disable it save the settings and enable back on.
The above 2 steps resolved my issue and I could able to view my camera from outside of my home network.
Still no luck. Tried it several times.
Could the power outage reset something on the modem or router to change this?
Thanks
Darren

That's what I thought. The power outage may have set the modem, router or camera settings back to factory defaults causing it to loose connection. First thing first, call comcast and check if the modem is still on bridge mode. The modem may have been set back to a modem/router mode due to power outage.
You may test if the remote access is properly set up in the network by going to http://ping.eu. In that site, you will see your internet ip address, take note of that. Click on port check, enter your internet ip address and the port number you used in the alternate web access port then click Go. If it says closed, there something wrong in the settings of either the router or camera. In that case, I suggest you reset the router and camera and then reconfigure them.
I found these articles online which could help you reconfigure your router and camera settings:
How to set up your router
How to set up router wireless setting
Connecting camera to wireless network
How to set up remote access on linksys camera
How to set up TZO on the linksys camera
Hope these helps.

Unable to view content on CD, Viewable in windows but not on Mac

I am unable to view the contents on a cd I made a while ago on a MS machine.
In finder the CD has two folders both are empty (mp3's) and under the folder it says no items.
I can see the files on the ms machine and on my mac through a terminal shell.
I could even copy files using terminal onto my mac but when I check them the files are smalller-under a meg.
The cd is formatted in ISO 9660 juliet. These files are accessable in windows.
Can someone explain this to me? I must have a bad setting because I searched this forum and found no posts related to my problem.

Hi
After applying the steps given by Steve Fan, to verify the indexing status, please follow these steps: -
If the
Indexing Status reports 0 items remaining and Instant Search is still not returning the correct search results, exit Outlook and restart your computer. When you start Outlook again, verify that Outlook is indexing your items
properly by doing the following:
On the
Tools menu, point to Instant Search, and then click
Indexing Status.
Alternatively, click the arrow in the
Instant Search pane, and then click Indexing Status on the menu.
Verify that the number of items in the
Indexing Status dialog box has increased. If the number has not increased, you must wait until indexing is complete for the results.
If you are not getting results after restarting, the next step is to rebuild your search catalog. The search catalog is a file where all of your Outlook and Microsoft
Windows items are indexed. To rebuild your search catalog, do the following:
Exit Outlook.
In Microsoft Windows, click the
Start > Control Panel.
Windows Vista: click
System Maintenance > Indexing Options.
Note: In the classic view, double-click
Indexing Options.
Microsoft Windows XP: Under
See Also, click Other Control Panel Options, and then click
Indexing Options.
Note: In the Classic view, double-click
Indexing Options.
Click
Advanced.
Click Rebuild.
Restart Outlook.
Regrads
Ashish@V

Unable to view latest default trace in log viewer

Hello all,
We have NW 7.0 J2EE production server. We have a CI and two application servers.
Our SP level is SP18.
The DB is oracle and the operating system in RHEL 4.
I have a problem in viewing the default trace files in log viewer using the visual administrator.
I am able to view the old default trace but unable to view the latest trace data generated.
I am facing this problem when i try to view the logs of a particular application server.
Able to view the latest default trace properly for CI and the other application server. Problem lies only with a single application server.
I have also check the permissions in OS level for the trace files. Everything looks fine.
Could some one give me a clue on how to solve this issue.
Regards,
Chandru

Hello Joey,
The trace file isnt too big....
We have set the file size as 10 MB.
We have some 15 to 16 default trace files for each of the server process and we have 3 server process in that application server.
The ForceSingleTraceFile parameter is set as YES in visual admin.
So the logs will be displayed in visual admin as a single default trace file.
Hope I had provided the inputs you have asked...
Regards,
Chandru

Unable to view / add / change apps in hpconnected

I am completely unable to view, add or change my apps for my printer on the hpconnected website. All other sections of the website work - I can see my device (it says it is working properly), etc - but when I click on the "Services" tab, it just "Retrieving Subscriptions" and gets stuck there. This has been the case now for over a week - so I assume its not a service related issue but instead specific to my account.
Any ideas on what could be causing this? I have tried restarting the printer, reconnecting it to the internet, etc. It says that it is connected to hpeprint in its status. Anything else I might be able to do to get this working? I wanted to get the scan to email app on to this printer.
Thanks for any advice.

Hello adahya,
Welcome to the HP Support Forums!
Sorry to hear about the problems installing / managing Apps when logged into HPconnected.com. I would like to see if I can help find a way to get this working for you, can you answer a few questions first?
What is the model of printer?
What is the Operating System installed on the computer, Windows or Mac?
What is the web browser you are using to log into HPconnected.com with?
Look forward to hearing back from you.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Blackberry Messenger, unable to view others' replies

I've had my phone working for about a week now. It's a Curve 8320. I've noticed that yesterday and today there is a BB Messenge icon and when I check the messages I can see the first few words of the message but am unable to view the remaining text. Also when I open up BB Messenger, I only see my comments and not those of my contacts. I know I have a message because of the red blinking light but for whatever reason, I'm unable to view their messages. Has anybody else had any similar experiences with their BB Messenger or have any suggestions to get it to work properly.
I have a 4GB Micro SD card.
Yvete

I have the same issue with my blackberry messenger - it only started a few weeks ago, but no incoming messages can be read.
I can sit next to my gf and send her messages, but I only see the first 4 characters of my received messages in the initial message list and then can't read messages in BB messenger.
Any ideas on fixing this?

Users are unable to view private mails of shared mailbox

We are facing one issue here with shared mailbox ( helpdesk and servicedesk) . users are not able to view mails which marked as private to helpdesk ID
Symptom:- users having full access to shared mailboxes are unable to view private mails received in shared mailbox.
Product: Outlook 2010 SP2/ Outlook 2013

Did you try the article I suggested?
Essentially, the "owner" of the mailbox needs to grant "show all items, including Private, to my delegates".
I think MSFT introduced this change (to honour the Private flags) in OL2010, and earlier versions did not respect the Private flags.
(some customers want private to be properly private. other customers, don't want private to be private, if you know what I mean ;)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Unable to view chinese properly.

Similar Messages

Maybe you are looking for