Unwanted EKRS entries - ERS process

Hallo, my Friends.
We are in the middle of negotiating ERS process with our vendors in Mexico, legal considerations prevent us from using it "as is".  The table EKRS has been populated for some time, the GR were cleared using MIRO.
My question is: can we somehow delete the EKRS entries safely?  I have read through the forums that these entries mean no danger, that if the ERS process is run over entries already treated with MIRO, a zero value MM Invoice will be created without an FI effect, it's ok, yet, is this the only way to get rid of the EKRS entries?
Thanks in advance.
Ernesto

hb,
I'm not sure I understand what the problem is.  Are you saying that
   - a GR was done
   - entries placed on EKRS table
   - entries disappear from EKRS without executing MBER or MRRL? 
Are you sure the entries are on the EKRS table at all? 
Have you tried to reverse the GR and then do the GR again just to see what happens?  Are you sure the line item is set up for ERS?
Good Luck
Sandra

Similar Messages

  • Changing GR/IR clearing account in Service Entry Sheet process

    Hi,
    We are using one Gr/ir clearing account for both Material and Service Entry sheet process.
    Now for clear process we want to create new account for the Service entry sheet.
    We have given blank valuation class for Service entry sheet and it has been assigned to the g/l account.
    After analysing the scenario we had two options.1.  Whether we can change the valuation class
    or 2. we can create new G/l account.
    But i had a doubt will it impact anywhere if i change the valuation class.
    Can anybody advice me??
    Thanks n regards,
    Veena

    Dear Javeed and Sadhashivan,
    Thanks for your answers. Yes we have sort key set on both the accounts and also we have tried to display all the PO relevent fields but unable get through.
    Please note we need PO no line wise on the ledger of adjustment accounts NOT on the GR/IR account.
    1) Goods Delivered but not yet invoiced
    2) Goods Invoiced but not yet Delivered
    Hope I have made my point clear.
    Thanks
    Ayaz

  • Error during entry document processing - wae02 - EHS

    Dear All,
    In WAE02, i am getting the below error
    "Error during entry document processing - wae02 - EHS"
    But, when i click on "extras - messages", its empty.
    Added, i have assigned "Partner assignement", posting is over, Accout assignment is complete.
    Still the warning message comes and PO is not getting created.
    Please answer this high priority issue and do the needful.
    Regards
    Hari Prasath

    Hello Hari
    Seems issue is with BAPI in Purchase order process
    Check the OSS Note :1111389
    Balajee

  • How to delete/remove specific, unwanted autofill entries

    I mistyped an entry (e.g., my name) in a specific field on a form I use often. Now, each time I begin to type my name in this field, it offers the previously mistyped entry as an option.
    Question: How do I delete the unwanted mistyped entry as an option?
    For example, in Firefox this is possible by highlighting the typo and then selecting Shift-Command-Delete. The mistyped entry is forgotten.

    HI,
    From the Safari Menu Bar click Safari/Preferences and select the Autofill tab.
    Click the Edit button next to Other forms, select the the data you want to remove and click Done.
    Relaunch Safari.
    Carolyn

  • Accounting entries during process change in production

    Hi
    Can someone tell me what will the accounting entries be during a production cycle from one process to another?
    For example.. raw materials first put into first process of production... then second process and so on....
    how are the WIP account and Semi finished account used?
    Thanks

    Cost of Good Manufactured.
    At the time of WIP Calculation
    Work in process Ac--DR
    TO Change in stock ac
    At the time of settlement
    Change in stock ---DR
    TO WIP Ac
    Best Regards
    Ashish Jain
    Message was edited by:
            Ashish Bohara

  • Read TVARV entry in process chain

    Hi BW Gurus,
    I have an infopackage in which the accounting period is one of the selection conditions. What the accounting period is at any particular point in time is dependant on an entry in TVARV table. So in my process chain, I have to read TVARV and use that in the infopackage selection criteria and pull only for the accounting period that is in TVARV table. Can someone tell me how I can do this in my process chain???
    Thanks
    SRD.

    Hi Arno,
    So are you saying that I read TVARV, assign it to a variable and whenever the accounting period of a particular record is NOT EQUAL TO TVARV Entry then RETURNCODE <> 0 so that the record is not updated. But in start routine you do not have RETURNCODE , you can only do ABORT. So what would happen is whenever a data package has a record with acct period not equal to current TVARV entry, then the whole data package will ABORT. even though there are other records whose acct period = TVARV entry. Because the START routine executes for a data package and not for individual records.
    Do you think my thinking here is wrong?? plz correct me if I am wrong.
    Thanks for response
    SRD

  • Service entry approval process in MM-SRV-SUS by client engineer

    Dear Experts,
    We are implementing the service entry process in the classic scenario. In the new process, the service agent of the supplier will enter the service entry sheet from the SUS. Once triggering of the service entry sheet is completed, the service entry sheet will have the status of 'No Acceptance'.
    Here comes the client requirement. The client wants to have two step approval process for service entry sheet. In the first step, the supervising engineer of the client will approve the service entry sheet. Then the next step of approval will be financial approval which will be done by the cost center manager.
    In the existing process in SAP MM, the supervising engineer of the client enters the service entry sheet manually and goes through one step approval of the cost center/org unit manager approval. The existing approval process is implemented with release strategy available in ECC.
    How can the new approval process be implemented? What characteristics should be used to enable the system to find the first level approver i.e. the supervising engineer? is it achievable through release strategy?
    Any idea or thought will be highly appreciated.
    Thanks and regards,
    Ranjan
    Ranjan Sutradhar

    Dear Masa,
    Thanks for the advice, I still have one more question.
    Does this mean I don't have to follow SAP's advice stated below?
    In the Plan-Driven Procurement with Supplier Integration business scenario, you can use Supplier Self-Services (SUS) and SAP Materials Management (SAP MM) in conjunction with each other.
    SAP MM is used as the procurement system, since this scenario involves the procurement of direct materials.
    *This business scenario is not suitable for the procurement of services or indirect materials*
    In other words are there any consequences for using the MM-SUS plan driven procurement scenario for services instead of direct materials?
    Kind Regards,
    Arie

  • How can I customize Entry tax process on Inventory transfer ?

    Hi all
    As I got to know that In Indian loclization there is no option for tax calcultation of non exciseble goods
    So can any one help me that how can I Map the process for entry tax on inventory transfer ?
    Thanks
    Ricky

    Hi Joseph
    Complete scenario is , My Clint production whse is in different state and billing whse is in different state so when He call the material from production state to billing state , He need to pay 1% entry tax and which is not part of item cost , He get set off for this so I want to make Inventory transfer and on inventory transfer I need tax code selection field and after selection the field system should transfer the tax value to related GL .
    Thanks
    Ricky

  • Supplier entry - Any process flow ideas?

    Hello,
    This is a question beyond the Oracle Applications itself...I believe.
    We are reviewing our processes and found that the Supplier Entry is taking more time than we thought and worst, several errors are being encountered.
    Our Supplier Entry flow is as follows:
    1. The buyer collects data from the new supplier (by email and corporate letters)
    2. The buyer sends emails to Finance and Accounting, notifying about the new supplier record.
    3. Accounting replies that email, asking for detail information on the new supplier, so they can assign the proper accounting combinations for liability and pre-payment (those accounting combinations depend on the supplier type and country of the supplier)
    4. Finance asks information about the bank account of the supplier.
    5. The buyer sends the proper information to Finance and Accounting. Accounting replies with te proper accounting combinations.
    6. Finance receives information on the bank account. Enters the new supplier bank account.
    7. The supplier record is created by someone at Purchasing (restricted responsibility)
    8. Finance assigns the bank account to the supplier.
    As you see...it can take time!
    And worst, some times there are a lot of new suppliers to be entered on Oracle.
    I'm sure there are better ways to do this.
    Please, be kind and share some ideas on this topic.
    Thanks in advance for your help!
    Regards.

    Hi,
    You can use customized form, workflow and APIs to reduce the time and communication error. through workflow notification you can send email to supplier for bank details.
    Our Supplier Entry flow is as follows:
    1. The buyer collects data from the new supplier (by email and corporate letters)
    2. The buyer sends emails to Finance and Accounting, notifying about the new supplier record.
    A: Build one customized form and give access to buyer. Buyer enter main supplier data and send it to finance throgh notification (workflow).
    3. Accounting replies that email, asking for detail information on the new supplier, so they can assign the proper accounting combinations for liability and pre-payment (those accounting combinations depend on the supplier type and country of the supplier)
    B: They will fill the accounting information on Customized form which open through the notice.
    4. Finance asks information about the bank account of the supplier.
    5. The buyer sends the proper information to Finance and Accounting. Accounting replies with te proper accounting combinations.
    6. Finance receives information on the bank account. Enters the new supplier bank account.
    C: Buyer should enter the email address of supplier on the form. Through the email address, finance will send an automatic mail to supplier for bank information.
    7. The supplier record is created by someone at Purchasing (restricted responsibility)
    8. Finance assigns the bank account to the supplier.
    D: Finance will Assing the bank account once the information will get from supplier. And the whole record (customized table) will transfer into Oracle Application through API.
    Note: You need one developer who have knowlege of OA framework / Oracle web form developer, work flow and API knowledge.
    Regards,

  • Most Recent Alert Log Entries - Error processing Alert Log

    Hi..
    Can someone help me?
    When I want to check the log of alerts the following thing goes out for me:
    "This shows the last 100,000 bytes of the alert log. The log is constantly growing, so select the browser's Refresh button to see the most recent log entries.
    Number of Lines Displayed          Error processing Alert Log"
    Since I can solve it?

    Number of Lines Displayed Error processing Alert Log"
    check ur alert.log file content any data.
    bcoz if ur alert.log file entries is null then above error is show. ( happen with me when i am purge alert.log file and try to view content of alert.log then above error received so may be problem is null contents ( empty alert.log file)).
    HTH

  • ERS Process

    Dear Friends,
    I am getting error While using T code MRRL
    I have did Below configuration but still i am getting errror as "ERS settlement: No message was found for partner 102317/company code 9000"
    Configuration I did are:-
    ERS Settings
    1) Vendor Master
    In the vendor master purchasing data, the relevant settings for ERS has to be maintained
    2) Purchase Info Record
    Ensure that No ERS indicator is not checked in the info record for the vendor, Material + Vendor + Plant + Purchase organization.
    3) Purchase Order
    The Settings 1) GR-Based IV and ERS are defaulted from Vendor Master and Purchase Info record. Ensure that the above settings are maintained in the Purchase order. Tax code must be maintained in the purchase order so that auto settlement considers this tax code
    4)IMG settings
    Define the Message type
    SPRO> IMG>MM>LIV>Message determination > Maintain Message Types
    Maintain Message Schemas
    Maintain the message type (ERS) in the message Schemas MR0004 u2013 ERS Procedure in the following IMG path
    SPRO> IMG>MM>LIV>Message determination > Maintain Message Schemas
    Maintain Conditions
    Create the condition record for the message type ERS in the following IMG path
    SPRO> IMG>MM>LIV>Message determination > Maintain Conditions
    (Transaction code u2013 MRM1) and also choose maintained Output Device in u201DCommunicationu201D.
    Assign Forms and Programs
    Assign the forms and programs for the message type ERS in the following IMG path. In case custom program and form is designed, same has to be assigned to the message type ERS.
    If the Form is different for different medium of output, the relevant forms have to be assigned to the message type and medium.
    SPRO> IMG>MM>LIV>Message determination > Assign Forms and programs
    Buit still i am getting error,What is the reason for that error.
    Kindly suggest me.
    I have download SAP ERS document and gone thorgh that.
    Regds,
    Sankar.

    Hi,
    The reason you are receiving this error message would be due to     
    incorrect customizing. Please check the output device for the  condition, whether the field is empty (in the area communication). (please maintaine the output device for the company code).
    Please check also the sap note:129643: 
    3. Invoice Verification -> Message Determination -> Maintain Conditions     
       "Create Output" or "Change Output" (if it exists)                        
       For the output types KONS, REKL, ERS, RAP, and INS proceed as            
    follows:                                                                    
       Select the "Company Code" key combination.                               
       Enter the company code, choose "Communication",                          
       enter an output device and save the condition record.       
    As a workaround,if you do not need message determination for ERS settlement, the error M8446 can be switched off in transaction OMRM.    
    For message M8446 issue, please kindly try the following menu path:           
    IMG -> Materials Management -> Logistic Invoice Verification -> Define        
    attributes of Systems Messages  Here you can use the pull down menu and       
    set the message to "switch off message"                                       
    Best regards
    Erika

  • Batch entry in process order in Goods receipt tab mandatory

    Hi,
    There is a field in Good receipt tab of process order (AFPO-CHARG). We want to make it mandatory field. Is there any way to do that & it should be dependent on order type-plant.
    regards,
    Mohit

    HI,
    Good receipt tab of process order (AFPO-CHARG
    I think you are asking about batch field for header material.
    If you want to make it mandatory then you can do it by creating screen varient (SHD0).
    You find many online help documents and threads on screen varient, search it over here on sdn or on net also.
    Regards,
    Dhaval

  • Obstruct unwanted F4 entries in GL.

    Hi ABAP Gurus .I have strange requirment ,since we implemented BBP ,In GL accounts when we press F4 ,we were getting unwanted data ,how to clear it ,i mean how to obstruct the unwanted data n allow only req data .
    <removed_by_moderator>
          Thank you all .
    Edited by: Julius Bussche on Sep 1, 2008 2:05 PM

    hi,
    I think you have to play with search help exit. G/Ls use search help SAKO, there is a search help exit inside. The whole concept is fully documented in SAP, so you can have more info from SAPHelp.
    hope this helps and was <removed_by_moderator> ASAP enough ))
    ec
    Edited by: Julius Bussche on Sep 1, 2008 2:06 PM

  • Service Entry sheet process

    Hi ,
    could you please help on this scenario.
    We had implemented Service based IV recently, but business people want to add -ve qty during SES , before implementing this Service based IV check users can enter -ve qty in SES, because of this implementation they cannot enter -ve qty in SES.
    invoices are pending because of this.
    please advise the solution for this. even though we have implemented this service based IV check how to enter -ve qty.
                                                                                  (OR)
    we did removed this check, but we cannot uncheck in the existing POs, how to uncheck in existing POs, please advise. Thank you for your help.
    - Udaya

    Hi All ,
    Thanks for your reply.
    Here in our business scenario we planned for 30days to work , we have to pay for 30days, but if supllier cannot come to work for 5days, we need to deduct minimum amount for 5days.
    for example 30 X100  = 3000
    less               5X 80    = 400
    Total                          = 2600 instead of 25X100 = 2500.
    in this case how to enter SES. total qty always will be positive as per SAP standard.
    how to do in this scenario. 
    as we have already put Service based IV mandatory check, POs are with this check , how to remove this check for  the existing POs to enter -ve qty as explained in above scenario.
    please help to explain is there any way to uncehck the service based IV in the existing POs.
    thnak you.
    Udaya

  • Unwanted Firefox entry in the Open With Windows Explorer menu

    Open Windows Explorer and right-click various file types. You'll see there's a submenu called "Open with" that allows you to choose a particular application. Firefox is listed for numerous file types it can't actually handle, like RAR and MKV.
    Does anyone know why? I've never attempted to open those file types with Firefox, though I did download such files with Firefox. I can't find any bug reports about this, and the above seems like too little information to file a report.
    I'm not the only one with this issue:
    * http://forums.mozillazine.org/viewtopic.php?f=38&t=2870531

    After cleaning the registry manually, I haven't been able to trigger this.
    * I now have RAR under Options → Applications again after downloading a file of that type. The respective file type doesn't have Firefox under the "Open with" menu in Windows Explorer.
    * I set Firefox as the default browser when installing. Then I set Internet Explorer as the default using the Control Panel, then Firefox again when prompted at startup. Since it's one of the few times Firefox interacts with the registry, I thought it might trigger the issue — it didn't.
    Since I can't recreate this, I think we can consider it a rare occurrence and forget about it. Thank you all for replying.
    ''the-edmeister wrote:''
    There's something screwed up in Firefox 31 and 32 with regards to Firefox messing with Windows OS File Associations […]
    Being Sunday, I'm too lazy to search for the relevant Bug report.
    * [https://bugzilla.mozilla.org/show_bug.cgi?id=1049521 Bug 1049521] - Be less aggressive about non-primary file type associations in Firefox on Windows
    That's the bug report about Firefox inadvertently stealing the file association for PDFs. That didn't happen on my system. I also don't see how this could be related. The PDF association is set on install, and reinstalling Firefox didn't change the "Open with" list for the previously affected file types.
    Then again, the patch on bug 1049521 touches the ''OpenWithList'' registry keys, which is what I manually cleaned up. It also handles more than PDFs: I spotted media file types like OG? and WEBM, but not MKV or any of the previously affected file types on my system.
    ''FredMcD wrote:''
    Me thinks me smells a virus at work.
    The system is clean.

Maybe you are looking for