Upgrading Applecare a day or two after?

Here's the situation, i was supposed to upgrade my AppleCare to the 3 years on my January 2010 MacBook, however, mother has been ill so i've been busy and forgot about it. My MacBook was shipped out by Apple on the 16th last year, due to weather conditions i didn't receive until the 21st. Now, when checking for an expired warranty, my MacBook's has apparently expired. But i wish to upgrade to the 3 years as i have always planned on doing. Is there any chance customer support will give me the benifit of the doubt? Considering i didn't actually get my MacBook till the 21st and it is only 2-3 days after they shipped it?

These discussions are user-to-user, so no one here can give you a definite answer. It certainly won't hurt to call and ask though.
~Lyssa

Similar Messages

Why do I get notices to update Photoshop and Audition every day or two after I have updated?

Several times now the Creative Cloud Manager has notified me to update Photoshop and Audition. I apply the updates only to get the request again a day or two later. I have checked and both apps are the version CC wants to update to. Now CC wants me to update again. Both apps are working, but the continual notices to update repeatedly are rather annoying.

Repeated updates http://helpx.adobe.com/creative-cloud/kb/updates-repeatedly-applied-cc.html

After upgrading to iOS8 my Exchange account has changed to an invalid address. I can change it but after a day or two it changes back to the invalid address. any help on this would be great.

after upgrading to iOS8 my Exchange account has changed to an invalid address. I can change it but after a day or two it changes back to the invalid address. any help on this would be great. Other user on our exchange server that have iOS 7 or lower do not have this problem. All iOS 8 users in our company have this problem

have you deleted the account and re-added it? Have you done a reset or restore as outlined in the iPhone user guide? What troubleshooting have you done?

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

S2disk stops working after laptop has been on for a day or two

Hey,
Running s2disk usually works flawlessly. However, I've discovered that after maybe a day or two, or three of the laptop being on (being put into a hibernate whenever I travel) hibernate stops working. There will be no error message on the screen when it runs, neither will there be any errors that I spot in /var/log/messages or /var/log/pm-suspend.log if I try pm-hibernate.
What happens is the screen goes blank and starts showing the s2disk messages, then it says that it's compressing the image, then it just pops up into my normal desktop environment.
The only difference I've seen on the screen between a successful hibernate and a non-successful hibernate is that the non-successful one never says "compressed image to ..... "
Thank you for your time
Edit: On a similar note, which may help to solve this, a similar thing happens when I s2ram (although they don't coincide - right now I can s2ram but not s2disk). When I s2ram it works but immediately wakes up without me moving the mouse, hitting a key, etc.
Last edited by pdexter (2012-10-02 20:11:48)

Hello Albert, see how many of these you can answer...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?

After a day or two I can no longer conect to a known WiFi network

After a day or two I can no longer connect to a known WiFi network without rebooting the router. The same thing happens with both routers I have (SMC and a Verizon) and when using a shared connection from my MacMini. This happens with each of FOUR iPhones I've owned and my iPod touch. So... yeah. I'm guessing this is either a software issue or some really odd signals are in the are in my area of New Jersey.
Anyone else having similar issues?
Message was edited by: aplardi

have you deleted the account and re-added it? Have you done a reset or restore as outlined in the iPhone user guide? What troubleshooting have you done?

After 23 years as a VZW customer, VZW won't offer any incentive if I upgraded and commited to another two years. Time to say good-bye.

fter 23 years as a VZW customer, VZW won't offer any incentive if I upgraded and commited to another two years. Time to say good-bye.

SadVZW wrote:
fter 23 years as a VZW customer, VZW won't offer any incentive if I upgraded and commited to another two years. Time to say good-bye.
When you complete your current contract, Verizon has options on which incentives you would like to take.
You can sign a new 2 yr service contract by purchasing a new phone at a considerable discount(~$400+).
You can also choose to purchase a new smartphone on Edge at full retail cost for which Verizon will give you either a 37.5% or a 62.5% discount(depending on your data allowance) on your monthly line access fee when on the More Everything plan.
If you choose to simply continue using your current phone on the More Everything plan, Verizon ALSO offers the same 37.5%/62.5% discount(depending on your data allowance) on your monthly line access fee.
Of course, as with anything else, there are some which always want more of a discount than what is offered.
Hopefully, after you get used to the rates with your new provider, you won't then want MORE which they likely won't be willing to give you.
Good luck with the new provider.

My phone was not worked for last two days it happen after the instalation of new os,this is happen one of my friiends also plssssss find some solution

my phone was not worked for last two days it happen after the instalation of new os,this is happen one of my friiends also plssssss find some solution

We are all just phone users here, and no-one can hope to provide any advice with so little information to go on as to what exactly has happened. You need to provide some detail.

Upgraded new iPad to iOS 5 after successfully using the machine for two weeks. The apps I downloaded are still here, checked for updates, all okay. However, when I try to use iBooks app or even USA Today, icon shakes, settles down then nothing. Help.

Upgraded new iPad to iOS 5 after successfully using the machine for two weeks. The apps I downloaded are still here, checked for updates, all okay. However, when I try to use iBooks app or even USA Today, icon shakes, settles down then nothing else happens. Several tries, settings appear correct. Suggestions? Safari operates correctly, music icon matches (not from iTunes, simply music on my MacPro and iPod). Is Cloud the issue, perhaps? But everything worked before the upgrade. Using my home network. Hope this info suffices. Appreciate any guidance.

Problem solved. Saw the solution in a more recent post. Downloaded a free app, then all my other apps started to work again.

System goes read only, after reboot all is fine for a day or two

OK, so here's the problem, I got a new PC, all fanless, SSD hard and all.
Works well for a day or so, then goes read only. For example - I come back from work, type something in the terminal and I get Input/Output Error. I cannot reboot, it says Input/Output Error as well.
So I hard-reset it, it boots up, everything is fine again for a day or two.
The HDD is Corsair CSSD-F40GB2, the MB is Gigabyte H55N-USB3, proc i3 540,
The / and /home are both ext4 mounted with defaults,noatime,discard.
I tried with/without discard.
I also tried changing the SATA/power cables - same results.
I also tried enabling/disabling features in BIOS like DMA/SMART/AHCI/compatibility stuff - same results.
Here's a dmesg I managed to get (errors are near the end).
http://pastebin.com/vJfdW90z
And here's a smartctl -a /dev/sda:
http://pastebin.com/eQxASEBM
Any suggestions are welcome. Also is there some diagnostic app for Corsair SSD that I can run and check the drive?
Cheers.

Well I don't recall how freshly booted, it was the only time that the system was read-only - giving input/output error to everything but dmesg was working so I saved it all to pastebin.
The system is a PC so I never tried anything else different from poweroff/reboot (works fine).

CSS11501 VIP just stops after a day or two

We have a CSS11501 that we are using to frontend an oracle colaberation suite cluster of unix servers. There are two servers in the first cluster. I have set it up to have a single load balanced vip with the following content services (http, imap, smtp, port 7777, and port 9401). Two other servers have a different load balanced VIP for their http and LDAP funtions. We are trunking in from a Cat3500XL switch the two vlans (10 "public" and 250 "private server") via the gig interface. It works fine for about a day or two then the VIP just stops responding to any traffic. We have done dumps on the servers and they are not getting any traffic through at all. Each server has a seperate VIP & source group set up as a straight pass through for maint access, these continue to work fine. I have tried stopping and starting the services, content rule, and source groups. even totally deleting the VIP and recreating it does not work. Rebooting the switch was of no help as well. If I recreate all of the content rules on a new VIP and assign the services it comes up fine but the old VIP address just stays dead. It is almost like the VIP has a limited lifespan and then shuts down. Any suggestions would be helpfull as this is a new technolagy for me. Thanks.
Burke McCrory
Internet Administrator
Oklahoma Tax Commission

you will have to capture a sniff in front of the css to see if it is receiving traffic for the vip.
You can also do a 'sho summary' and see if the hit counter is increasing.
Then check the upstream device and verify the mac address associated with the vip.
Make sure the L2 cam table is pointing to the CSS.
Do you have redundancy turned on ?
Finally, not sure what is the colaboration suite exactly, but if this is a software loadbalancing tool, you may want to stop using it if you have a CSS. Simply configure the server independent from each other.
In the past we have seen many issues when trying to combine both software and hardware loadbalancing.
Gilles.

C4599 installing fine -- disappearing within a day or two!

Hi all! I just bought a C4599 (have been an avid HP printer lover for over 10 years) and excitedly set it up and love it but I am having a recurring problem that may force me to return it for a different printer. I have contacted HP tech support via email and rec'd very sparse help, thus far so thought I'd try here. I *DID* search the forum and found one problem similar to this one but it hadn't yet resolved into a solution and it was a little different (he was saying his printer continues to work fine but only his scanner disappears -- in my case the entire printer disappears).
So here's the config:
(1) C4599
(2) Toshiba laptops, both running Vista (one is my wife's, one is mine) -- though there are certainly differences between the two from personal use, I do all the updates/maintenance on them (and they are identical models) so from a hardware point of view they are identical and from a software point of view they are nearly identical (with regards to service packs, drivers, etc)
(1) fairly experienced computer guy (prior retail bench-tech, current software engineer) -- not saying I know it all, no way!
The initial install and results:
1) Installed the printer via USB using my laptop, worked great -- configured printer to operate wirelessly on my LAN via DHCP
2) Removed USB cable and ran setup software again -- this time changing the setting to use the now wireless printer -- worked great!
3) Ran the software on my wife's laptop, setting the wireless printer up -- worked great!
4) After about a day I notice, when trying to print, the printer is no longer among my printer choices. It's simply not there. The HP Digital Imaging Monitor also says it's not there.
5) My wife's laptop shows it is connected to the printer just fine, and prints successfully.
6) I notice that in the NETWORK panel (on my laptop) the printer is still there -- but rebooting my laptop does nothing.
7) I reinstall the software on my end, printer is found -- works great!
8) Problem repeats several times on both of our laptops over several days. Each time the symptoms are pretty much exactly as described above. Each time one laptop can still use the printer, while the other can't (but don't read that to mean that never do both laptops see the printer, they DO! Once I newly install the software on the ailing laptop, BOTH LAPTOPS CAN THEN SEE THE PRINTER -- AND USE IT! But it's just a matter of time before one of them "loses" the printer... and sometimes both of them lose it).
9) I then changed the printer to a static IP that I know for sure no other device on my network will contend for (it's outside of the DHCP pool and everything else on my network is DHCP). This did not resolve the issue, within a day or two the printer disappeared again.
10) I emailed HP tech support and received a length document outlining how to open ports, disable security settings, etc. While this seems helpful, it seems odd to me -- I would think that if I can see and use the printer (including scanner) with no problems for a day or two then things like closed ports and too tight security settings wouldn't be the problem -- but what do I know.
11) So I proceed with step 1 of the email from HP and at step 2 I am told to:
b. Then perform the below steps to scan using Embedded Web Server.
1. Open Internet Explorer browser.
2. Type the IP address of the HP All-in-One/ print server (as taken from the
Configuration page) into your browser.
3. Press Enter.
NOTE: Java must be installed on the computer. If you are using Windows XP,
it may be necessary to obtain the latest version of Java.
4. The Embedded Web Server will appear.
5. Select Scan, which displays the following options: Image Type, Image
Format, Document Size Adjust the settings accordingly.
6. Click the Scan button.
12) However, after doing all of the above and getting to step 5, I see NO SCAN "button" -- in fact, nothing really says "scan". The web server page looks nice and has areas for me to see the wireless configuration (and change it) and do a few different things and the page looks complete --- but no "scan" function can be found. I know the scanner normally works, though, b/c I have used it successfully a few times.
After emailing the results back to HP 3 days ago and not receiving a response, I'm getting to the point of giving up -- I'm much too busy to deal with a printer that needs to be reinstalled every day or two and return periods nowdays on most computer stuff is 15 days so I'm getting ready to just take it back in a few more days. I'm hoping you guys here can help me fix this! (PLEASE)
I know this is length but was trying to provide as much relevant info. as I could think of. I appreciate any feedback that might result in this problem being fixed.
Thank You,
Bane
This question was solved.
View Solution.

Hi Bane,
First off, the C45xx series of printers do not have a scan feature from the printer's internal web server. Sorry about the bad advice from HP on that one -- they should know better.
Next, what firewall are you running on your laptops? I'm wondering if the network port used for device discovery is blocking the HP software access to your LAN?
When you lose the ability to print, can you still browse the printer's internal web page? Also, when you lose the ability to print, does power cycling the printer help at all?
I know you set a static IP address for the printer. Have you considered setting a DHCP reservation for both the printer and laptops so that your router always assigns the same IP address to the laptops?
Finally, what brand of wireless-router are you using? Are you using encryption?
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Calculate Difference in Days Between two Dates

Hi,
I'm trying to figure out how to calculate the difference in days between two dates using JavaScript in LiveCycle. (JavaScript knowledge = minimal)
Where "Start_Date" and "Current_Date" are the names of the two dates in the Hierarchy palette. (both Date/Time Field)
*Current date is using the Object > Value > Runtime Property > Current Date/Time
I need a Text or Numeric field displaying the difference in days. (Difference_in_Days)
I've noticed the following code being pretty standard amongst other responses:
var
Start_Date = new Date(Start_Date);
var
Current_Date = new Date(Current_Date);
var
nAgeMilliseconds = Current_Date.getTime() - Start_Date.getTime();
var
nMilliSecondsPerYear = 365 * 24 * 60 * 60 * 1000;
I know there's code missing, and the above code might not be correct.
Please advise.

Where "DateField01" = user entered date field
Where "DateFiled02" = Current Date/Time (Runtime Property)
where "Subform" = the subform containing DateField01
My script now resembles:
var oneDay = 24*60*60*1000;
var firstDate = new Date(Subform.DateField01.rawValue);
var secondDate = new Date(DateField02.rawValue);
(firstDate.getTime() - secondDate.getTime()) / oneDay;
I tried adding:
app.alert(String(diffDays));
Although I assume the reason I didn't get an error is because DateField01 is empty when the form is opened.
If I swap in actual dates instead of fields it works perfectly.
When I use the fields I have no information populating after I enter a date in "DateField01"

OS Upgrade - Can Clustering work on two diff OS levels?

I have WLS7.0sp2 installed on a pair of Solaris 8 boxes. We are upgrading the OS to 9 but the users don't want a down time on their Apps. Therefor, we can't take the whole app down and hit both boxes with the upgrade. My hunch is that if we upgrade one box one day and the other box a day or two later the WLS cluster would still function normally on the two OS versions - as long as the upgrade went smoothly. *Both boxes contain AdminServers for different Apps.
          Anybody do this and know of any gotchas?
          Thanks.
          Martin

First of all I would say that rather then trying it in production if possible try to do it any other environment like System Test environment etc. which mimicks your Production environment. On the other hand let say you do dont have any such environment and you do it in Production make sure that WLS7.0sp2 is well tested on Solaris9 as it must be. I have not tried so far clustering in different OS versions but it should not be any issue. Better get in touch with BEA customer support before making such changes in production.
          Regards,
          Imtiaz

Mt copy of lightroom 5 still thinks its a 30 day trial, even after entering the serial numbers

my copy of lightroom 5 still thinks its a 30 day trial, even after entering the serial numbers

you bought the upgrade version meaning you have a previously purchased lightroom. after entering your lr5 serial number you're being prompted for that previous version's serial number.
enter the correct number at the correct time and installation will proceed.
if you made an error and do not own a previous version, Return, cancel, or exchange an Adobe order

Upgrading Applecare a day or two after?

Similar Messages

Maybe you are looking for