USB 2.0 probl

Hi i've got a Muvo 4gb and i've just got a new computer with xp home edition SP2 and its got usb2 ports. When i connect my mp3 player to it its recognized as a muvo but as i try to install it nothing happens, windows says drivers missing or something like that.
When i stuck it into my other computer (xp pro sp2) with an usb port it works. But i want to use my usb2 connection so please help me i've treid updating my windows but nothing helps!

Sounds like a USB compatibility issue with your PC, if the other PC is working fine. I would buy a good quality PCI USB2 card e.g. Adaptec, and see if this works.

Similar Messages

Muvo² 4 GB USB and recovery probl

Hello,
i own my Muvo for 8 months now. Yesterday it woke up and did not want to do anything, so i started recovery. I can clean media, format everything ... but i can't get an USB connection. Sometimes the Muvo even says media error while trying to connect to the PC. Is there any way i can fix it on my own ? I tried everything i could find with the search. Tested the Muvo on 2 PC?s.
Thanks
StefanMessage Edited by slame on 06-28-2005 05:03 PM

Tried a new cable also?
If so, then you've done all you can and the player is faulty. Are you in warranty? If so, contact support. Even if not, you might want to contact support for an out of warranty repair.

USB has a probl

My computer has not been detecting my zen touch since I got it. I have just discovered that the problem lies not with the player (as I first suspected) but with the USB controller.
It tells me in the device manager that the "device cannot start (code 0)" and I can't think of anything I can do to fix it. My OS is windows xp service pack 2 so apparently I do not need to update my drivers (unless the fact that I updated from windows 98 to XP and my computer is quite old may have something to do with it).
Any help given will be much appreciated. Thanks.

Code 0 normally indicates a problem with the player or the USB hardware. You should make sure to reset the player and run a disk cleanup from rescue mode.
You should also of course make sure you have the latest drivers (and software) from Nomadworld.com downloads.

USB Audigy NX Probl

My headphone jack works fine but when I unplug it to use my speakers they dont play any sound and my microphone no longer works either. They have been working fine until I tried it today.
Thanks Brad

B-rad,
When you remove the headphones, does the speaker configuration change? Check Speaker Settings and see what it is currently set to. If you are using 5. speakers make sure it is set to 5. and make sure as you plug in headphones that it switches to headphones and back when it is removed.
Jeremy

Zen USB Power Adaptor proble

Yesterday I buy a creative zen plus and is works perfectely. It charges when I connect to my pc. I also buy an Zen Power Adaptor but when I plug it to the Stone it don't charge it. My sotne only charges plug into my Pc What is hapenning? Is my power adaptor falty?

Yes, it'll work.

Casque d'écoute usb

J'utilise mon MacBook Pro (Montain Lion) pour faire de appels VOIP ou Skype. J'ai un casque d'écoute Logitech par branchement USB.
Mon problème, quand je branche le casque, je dois toujours aller dans les préférences sélectionner le casque d'écoute pour la sortie de son et le micro.
Je suis surpris de cette manipulation que je dois répéter à chaque branchement. De plus, il faut régulièrement que je visite les préférences de Skype ou de mon logiciel de VOIP pour les mêmes raisons.
Quand je reçoit des appels, régulièrement je dois changer les préférences en vitesse alors que je présumais que c'était fait.
Je m'attends à ce que Mac OS X choisisse systématiquement le casque d'écoute quand celui-ci est branché.
Est-ce possible d'y parvenir?

I also purchased one of these adapters thinking it would solve my wireless connection issues.
If you look on the D- Link website, locate the relevant product, then cross check with the coding on the reverse of the usb dongle, it will tell you that it's not compatible with Macs.
However, I did manage to establish a link with my Airport Extreme Base Station, with a constant 100% signal, but no internet connection was possible.
I spoke to an Epson service engineer, and he confirmed that D - Link products on the whole are not Mac compatible, nor are there any reliable Mac support from D-Link.

Problème tension de sortie des Ports Usb sous Lion

Bonjour, je viens d'acheter un Macbook Pro qui fonctionne sous Lion et je constate des problèmes sur la tension de sortie des ports USB.
Mon disque dur USB Freecom 500 GO ne monte pas ???
Par contre un autre disque dur Freecom en 320 GO monte sans soucis
J'ai fait l'essai avec le disque Freecom 500 GO sous un Imac sous Lion ... Il ne monte pas !
J'ai fait le même essai avec un Mac Mini sous Snow Leopard est le disque monte.
Dernier test, j'ai pris mon disque Freecom 500 GO que j'ai mis sur un Hub USB (alim. Ext.) et le disque monte sous Lion ??? !!!! ????
Est-ce que quelqu'un à le même problème que moi ou mieux... la solution
Merci

Bonjour,
Avez-vous consulté les deux documentations ci-dessous ;
Agilent 34970 Data Acquisition System :
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=014F4CD7EF78136AE0440003BA7CCD...
Using the Agilent 34970A with LabVIEW :
http://www.ni.com/white-paper/4644/en/
Le problème provient directement de NI-MAX. Quelle version de NI-VISA et de LabVIEW avez-vous? Avez-vous installé ou reinstallé la dernière version de NI-VISA?
Merci,
Cordialement
Brice S.
National Instruments France

Problème Disque dur Western Digital My Passport Essential 1 To USB 3.0

Bonjour,
J'ai acheté un hdd Western Digital My Passport Essential 1 To USB 3.0 / USB 2.0 Silver.
P/N WDBACX10010BSL
S/N WXK14AA0X1511
Le problème est le suivant : Le disque n'est pas visible, alors j'ai regardé dans le gestionnaire de périphérique un point exclamation d'affiche jaune en disant "WD SES Device USB Device".
Je suis aller sur le site Western Digital pour recherche le driver, après avoir lancer la rechercher il n'y aucun driver disponible en tapant le P/N.
Si quelqu'un pourrait m'aider à résoudre ce problème.
Message was edited by: ageofempiresz

Le problème était le fichier système formaté sous mac. *Les partitions étaient en mac os x étendu.* Windows ne pouvait lire ce système de fichiers.
Alors on essayé différentes file system. *Il faillait choisir MS-DOS (FAT32) pour mac et Windows.*
Après ce formatage nous avons essayé sur un machine Windows vista ou 7. Maintenant ça marche.
Merci de ton aide.

Creative Zen USB and File transfer probl

Am the unhappy owner of a brand new Creative Zen touch 20gb mp3 player which apparently works with usb 2.0. After installing the software which came on the cd (file transfer software and nomad explorer) the Zen appears to get recognised by the pc with no problems when i connect via the usb cable. The Zen also displays 'docked' which is all very well. However if i select say 0 tracks to download to the player the xp progress bar seems to halt at around 60-70% and eventually the program (nomad) complains that the operation cannot be completed. I noticed that the small hard dri've in the player feels as though it is 'spinning down' around a similar time to the message being displayed. If at this stage i refresh the players view in nomad explorer it can be found with no problem....its just i cant write to it until i unplug the usb from the zen and reconnect. I spoke to creative who told me that because my pc (in system devices) reports that my usb is an 'open host' adapter...this means it cannot supply adequate power to the player....but surely USB2.0 is USB2.0 and if something claims to be USB2.0 compliant that would be the end of the story? The usb card im using is a usb 2.0 pci card and is also pretty new. Any help/ideas would be greatly appreciated.
I have tried various usb ports, usb and2 conections ( I have both), various cables and combinations and the same happens. I have also tried win xp and win98, and other disks I have with the same result. I have managed to transfer 20 os so mp3s (a small proportion of those I have been trying to transfer)after 3-4 hours hard labour but never the contents of a full folder. After a proportion of the files are transferred then Zen touch becomes 'busy' or 'not connected'. Obviously there is no way I can continue like this and it will have to go back.
I have tried the slightly newer driver but this did not work at all and I had to roll back to the one that came on the CD. I feel that I have given it a fair shot trying all the workarounds.
Is is a USB power problem? Should a powered usb hub cure it's If so why?
But is this surely is Creative's problem. It is obviously a known issue but what are they doing about it's Putting out Zens which are prone to this problem is not good practice. Any solutions out there?

Hey,
If you tried it on a friend's computer and you're still having problems then it may be a problem with the Zen. Before you call or e-mail tech support, here is what they will tell you do to first before they really get in depth with helping you. Go into Rescue Mode (there is an explanation on how to do this at the top of the forum) and do a disk clean up. After that, try it. If that doesn't work then click the reload OS option which will take the firmware (like windows to your PC) off the Zen. Don't worry you can easily put it back on. Go to Support>Downloads>select Zen Touch, etc, etc. and download the latest firmware and run it. Hopefully that will fix it....
I had some connection problems myself with my ZT as soon as I got it as well. and simply reflashing the firmware fixed and now I love my Zen. I hope everything works out for you.
Wilco

Can do everything except record with USB card. Motherboard probl

Hi all. Here's a problem that I'm stumped on. I've looked through the previous entries and tried various things already. I'm using an older external SB soundcard (Audilogy MP3 #580270) and a newer computer (AMD Anthlon 64x2 dual core) that was sold with Vista, but I converted it back to XP-SP2. I've done the Autoupdate and gotten all the latest drivers from Creative's website. The automatic diagnostics in the app say everything's working fine. The device manager says it's fine. I can here audio coming in on the soundcard, I can play files from application. However, I CAN'T get it to record. It looks like it's recording, but nothing transfers. I've checked the all the audio levels and nothing is muted. What's the problem Here are some possibilities. What do you think . The card is just not compatiable with this motherboard. But why can I get the computer to output audio 2. There are other sound drivers that are interfering with this. I've reinstalled various ways. Again, it plays back just fine. How do I disable the other drivers ("audio Codecs") Any ideas Paul

I filed a bug at OSS and I received the message that USB recording through OSS is officially broken and will probably not get fixed in a long time.

XP USB Driver proble

I have the NOMAD Jukebox Zen Xtra MP3 player, and after i've installed all the software and everything, i go to plug in my player, and this is the error i get. USB Device Not REcognized. One of the USB devices attached to this computer has malfunctioned, and Windows doesnot recognize it.
I've tried updating the drivers from this site, but still isn't working. Any body have an idea where to go from here? THanks
Peanut

Lots of connection troubleshooting advice here in the Zen FAQ at Nomadness.net. Try everything that you can.

[Solved] Usb premissions proble. Can't write do usb disk

Can you help me? I can't write to my usb disk.
[skoczo@localhost skoczo]$ pwd
/run/media/skoczo
[skoczo@localhost skoczo]$ ls -l
razem 8
drwx------ 1 skoczo users 8192 07-13 20:19 SkoczoHardDisk:)
sudo pacman -Ss udev
core/systemd 204-3 [zainstalowano]
system and service manager
extra/eeze 1.7.7-1
Manipulate devices using udev and sysfs
extra/gudev-sharp 0.1-2
Gudev mono bindings
community/python-pyudev 0.16.1-2
A pure Python 3.x binding to libudev
community/python2-pyudev 0.16.1-2
A pure Python 2.x binding to libudev
community/udevil 0.4.1-1
Mount and unmount without password
community/uudeview 0.5.20-10
UUDeview helps transmitting & recieving binary files using mail or
newsgroups. Includes library files.
Last edited by skoczo (2013-07-20 15:41:48)

I tried to copy in xfce.
This is output from console:
cp * /run/media/skoczo/SkoczoHardDisk\:\)/seriale/Falling\ Skies\ -\ Season\ 3/
cp: cannot create regular file '/run/media/skoczo/SkoczoHardDisk:)/seriale/Falling Skies - Season 3/Downloaded From PublicHD.SE.txt': Permission denied
cp: cannot create regular file '/run/media/skoczo/SkoczoHardDisk:)/seriale/Falling Skies - Season 3/Falling.Skies.S03E07.1080p.WEB-DL.DD5.1.H.264-Abjex.mkv': Permission denied
cp: cannot create regular file '/run/media/skoczo/SkoczoHardDisk:)/seriale/Falling Skies - Season 3/Falling.Skies.S03E07.1080p.WEB-DL.DD5.1.H.264-Abjex.txt': Permission denied
Filesystem is NTFS:
Disk /dev/sdb: 1000.2 GB, 1000204885504 bytes, 1953525167 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x059626a5
Device Boot Start End Blocks Id System
/dev/sdb1 * 2048 1953521663 976759808 7 HPFS/NTFS/exFAT
"Why is it mounted on /run/media/ and not just /media ?" - this is good question

Zen Neeon 6GB (USB Probl

Hi,
I bought a zen neeon 6gb a few days ago. There were no problems at first but now.......
When I plug it into my laptop, it's as if nothing was plug in!
Same thing when I used the desktop in my office, I've changed another usb cable, I've pushed the reset button & nothing seems to work. Downloaded "Zen Neeon Firmware .0", also didn't work.
So what now? I'm still waiting for the support team to reply my email.

Does the player turn on, or doesn't it respond at all? Was the battery run down all the way?
Regarding your e-mail, did you use the form on the website, and did get an auto-response back? You should always get an automated e-mail back with some tips, if they don't help, check over the e-mail as you generally need to reply to that to let them know, so someone will deal with you directly.
Cat

USB probl

i just recieved my Zen Xtra 30gb today. after installing all the software, NOMAD Explorer doesn't recognize that my player is hooked up. Windows recognizes that something is in the USB port, but doesn't know what it is. it claims the device is not working properly. i tested the USB port with a game controller, and its working fine, so it must be either the USB cable or the Zen Xtra itself. my guess is the latter.
Its EXTREMELY frusterating to not even be able to use a product i paid so much money for.

Try a disk cleanup on the player, and make sure you have the latest drivers from Nomadworld.com downloads.
There's lots more connection troubleshooting advice here in the Zen FAQ at Nomadness.net.
A good thing to test if you can is to use the Zen with another PC to see if the Zen is definitely at fault.

Zen Touch, USB Connection Probl

Ok, i just purchased my Touch today and just fooling around with it,, it seems great, until...... i tried to connect it to my computer.
I first installed the CD and then rebooted, after that i plugged it in and all i get now is a "unknown device" listed. I clicked on it and then tired to update the driver with the CD still in the dri've but it wouldn't find what i need.
Is there a driver that i need? All i can see that comes with the cd is the Nomad Explorer and some manuals.
As for the install section i didn't install the Media Source as i have a Audigy 4 Pro, so i have Media Source installed already. But even opening MS nothing happens.
Any ideas? lol,, i love spending 500 bucks and having to spend 2 days trouble shooting to make it work.

Ok i installed it and it still didn't work... So uninstalled everything and then reinstalled it all allowing Media Source to install.
The error message that comes up is this:
"One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it."
Then it gives my USB Root Hub (6 ports)
and on one port it has UNKNOWN DEVICE. If i click on that device i can get to the point where i can install drivers but where would i find these drivers? The only Driver folder on the CD has .exe files not .inf ?
This is annoying and confusing.

USB 2.0 probl

Similar Messages

Maybe you are looking for