USB to Svideo

I'm new to MAC so please be patient. Does anyone know if I can connect my MacBook Pro to my TV using my USB to svideo converter box (works on my old PC) or do I have to purchase a mini displayport adapter?

Hi Eagle-Driver,
Who makes the converter box? I suspect there's some driver software that'll need to be loaded onto the computer. Elgato makes a product for Mac, like the one you've explained, if the one you have doesn't work and you're looking for a suitable replacement.
http://www.elgato.com/elgato/na/mainmenu/products/Video-Capture/product1.en.html

Similar Messages

  • Macbook pro to tv without dvi?

    Is there a way to connect a macbook pro to the tv, without using the DVI port?
    I can't get the cables for dvi to video without ordering online; and if I order online, it won't be here by father's day week-end, which is when I would need it. Is there another way?

    what do the folks at your local (if there is one) apple store say? usually they can get them in a couple of days, and the dvi-svideo cable they sell is pretty common.
    There are some non-apple solutions for USB to svideo/VGA/component (the yellow RCA cable), though I've never tried them, and they might be harder to find unless you've got a Fry's nearby.

  • Connection constantly dropping with edimax ew-7612uan USB adapter

    Hi there,
    I have just installed a newly purchased edimax ew-7612uan USB wireless adapter, the problem that I'm getting is that the connection works fine on boot however it keeps dropping very frequently.
    This can be reset by running netctl restart my-network. which is a temporary fix but I can't keep on doing this every 5 minutes or so when the connection drops.
    I don't think there is a problem with the USB adapter as it appears to work fine in windows (I don't work fine with windows though!).
    The same problem has happened on both of my Arch computers... I don't use any other distributions so I don't know if this is an arch specific problem or a general Linux problem. It also happens when using the live disk.
    The old adapter is still installed in the box but once I can get this one working properly it will be removed.
    The output of dmesg is as follows
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.13.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Apr 1 12:19:51 CEST 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=104c8e28-5731-4470-8911-313aca8c0d0f rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fedf7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007fedf800-0x000000007fedffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000007fee0000-0x000000007fee2fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000007fee3000-0x000000007feeffff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000007fef0000-0x000000007fefffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.4 present.
    [ 0.000000] DMI: HP-Pavilion GB394AA-ABU a6030.uk/LEONITE, BIOS 5.17 04/20/2007
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x7fedf max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CEFFF write-protect
    [ 0.000000] CF000-EFFFF uncachable
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000f5f40-0x000f5f4f] mapped at [ffff8800000f5f40]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
    [ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
    [ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
    [ 0.000000] [mem 0x7fc00000-0x7fdfffff] page 2M
    [ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
    [ 0.000000] [mem 0x7c000000-0x7fbfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7fedefff]
    [ 0.000000] [mem 0x7fe00000-0x7fedefff] page 4k
    [ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x379ea000-0x37cecfff]
    [ 0.000000] ACPI: RSDP 00000000000f8310 000024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 000000007fee30c0 000054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: FACP 000000007fee7a80 0000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: DSDT 000000007fee3280 004798 (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000)
    [ 0.000000] ACPI: FACS 000000007fee0000 000040
    [ 0.000000] ACPI: SLIC 000000007fee7cc0 000176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: HPET 000000007fee7e80 000038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098)
    [ 0.000000] ACPI: MCFG 000000007fee7f00 00003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: APIC 000000007fee7bc0 000084 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: SSDT 000000007fee8460 000304 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fedefff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fedefff]
    [ 0.000000] NODE_DATA [mem 0x7feda000-0x7fedefff]
    [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x7fedefff]
    [ 0.000000] On node 0 totalpages: 523901
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 8124 pages used for memmap
    [ 0.000000] DMA32 zone: 519903 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
    [ 0.000000] e820: [mem 0x7ff00000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88007fc00000 s86336 r8192 d24256 u524288
    [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515692
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=104c8e28-5731-4470-8911-313aca8c0d0f rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 2047396K/2095604K available (5271K kernel code, 836K rwdata, 1676K rodata, 1124K init, 1324K bss, 48208K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] NR_IRQS:8448 nr_irqs:712 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 8388608 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2133.881 MHz processor
    [ 0.003339] Calibrating delay loop (skipped), value calculated using timer frequency.. 4269.58 BogoMIPS (lpj=7112936)
    [ 0.003343] pid_max: default: 32768 minimum: 301
    [ 0.003383] Security Framework initialized
    [ 0.003400] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003402] Yama: becoming mindful.
    [ 0.003637] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.004945] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.005645] Mount-cache hash table entries: 256
    [ 0.005953] Initializing cgroup subsys memory
    [ 0.005966] Initializing cgroup subsys devices
    [ 0.005969] Initializing cgroup subsys freezer
    [ 0.005972] Initializing cgroup subsys net_cls
    [ 0.005975] Initializing cgroup subsys blkio
    [ 0.006006] CPU: Physical Processor ID: 0
    [ 0.006008] CPU: Processor Core ID: 0
    [ 0.006011] mce: CPU supports 6 MCE banks
    [ 0.006021] CPU0: Thermal monitoring enabled (TM2)
    [ 0.006030] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift: -1
    [ 0.006122] Freeing SMP alternatives memory: 20K (ffffffff819ec000 - ffffffff819f1000)
    [ 0.007776] ACPI: Core revision 20131115
    [ 0.010162] ACPI: All ACPI Tables successfully acquired
    [ 0.013362] ftrace: allocating 21068 entries in 83 pages
    [ 0.023793] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.057912] smpboot: CPU0: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz (fam: 06, model: 0f, stepping: 06)
    [ 0.059999] APIC calibration not consistent with PM-Timer: 4652ms instead of 100ms
    [ 0.059999] APIC delta adjusted to PM-Timer: 3346453 (155709996)
    [ 0.059999] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.059999] perf_event_intel: PEBS disabled due to CPU errata
    [ 0.059999] ... version: 2
    [ 0.059999] ... bit width: 40
    [ 0.059999] ... generic registers: 2
    [ 0.059999] ... value mask: 000000ffffffffff
    [ 0.059999] ... max period: 000000007fffffff
    [ 0.059999] ... fixed-purpose events: 3
    [ 0.059999] ... event mask: 0000000700000003
    [ 0.083418] x86: Booting SMP configuration:
    [ 0.089999] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.083422] .... node #0, CPUs: #1
    [ 0.089999] x86: Booted up 1 node, 2 CPUs
    [ 0.089999] smpboot: Total of 2 processors activated (8538.17 BogoMIPS)
    [ 0.090131] devtmpfs: initialized
    [ 0.093350] PM: Registering ACPI NVS region [mem 0x7fee0000-0x7fee2fff] (12288 bytes)
    [ 0.094547] RTC time: 8:54:04, date: 04/02/14
    [ 0.094607] NET: Registered protocol family 16
    [ 0.094741] cpuidle: using governor ladder
    [ 0.094743] cpuidle: using governor menu
    [ 0.094771] ACPI: bus type PCI registered
    [ 0.094774] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.094845] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.094848] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.094848] PCI: Using configuration type 1 for base access
    [ 0.094952] mtrr: your CPUs had inconsistent fixed MTRR settings
    [ 0.094954] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.094955] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.094956] mtrr: corrected configuration.
    [ 0.096731] bio: create slab <bio-0> at 0
    [ 0.096745] ACPI: Added _OSI(Module Device)
    [ 0.096745] ACPI: Added _OSI(Processor Device)
    [ 0.096745] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.096745] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.100165] ACPI: SSDT 000000007fee7f80 000175 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
    [ 0.100379] ACPI: Dynamic OEM Table Load:
    [ 0.100382] ACPI: SSDT (null) 000175 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
    [ 0.100470] ACPI: SSDT 000000007fee8390 0000CE (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
    [ 0.100675] ACPI: Dynamic OEM Table Load:
    [ 0.100678] ACPI: SSDT (null) 0000CE (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
    [ 0.100813] ACPI: Interpreter enabled
    [ 0.100824] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
    [ 0.100840] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.100842] ACPI: Using IOAPIC for interrupt routing
    [ 0.100873] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.100967] ACPI: No dock devices found.
    [ 0.103333] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.103333] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.103333] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [ 0.103333] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.103333] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.103333] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.103333] acpi PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
    [ 0.103333] acpi PNP0A08:00: host bridge window [mem 0x7ff00000-0xfebfffff] (ignored)
    [ 0.103333] PCI: root bus 00: using default resources
    [ 0.103333] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.103333] PCI host bridge to bus 0000:00
    [ 0.103333] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.103333] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.103333] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
    [ 0.103333] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
    [ 0.103333] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400
    [ 0.103333] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.103333] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
    [ 0.103333] pci 0000:00:1d.0: reg 0x20: [io 0xff00-0xff1f]
    [ 0.103333] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.103333] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
    [ 0.103333] pci 0000:00:1d.1: reg 0x20: [io 0xfe00-0xfe1f]
    [ 0.103333] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [ 0.103333] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
    [ 0.103333] pci 0000:00:1d.2: reg 0x20: [io 0xfd00-0xfd1f]
    [ 0.103333] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [ 0.103333] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
    [ 0.103333] pci 0000:00:1d.3: reg 0x20: [io 0xfc00-0xfc1f]
    [ 0.103333] pci 0000:00:1d.3: System wakeup disabled by ACPI
    [ 0.103333] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
    [ 0.103333] pci 0000:00:1d.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
    [ 0.103333] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.103379] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [ 0.103420] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.103511] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 0.103555] pci 0000:00:1f.0: [8086:27b0] type 00 class 0x060100
    [ 0.103727] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
    [ 0.103741] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
    [ 0.103750] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
    [ 0.103760] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
    [ 0.103769] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
    [ 0.103778] pci 0000:00:1f.1: reg 0x20: [io 0xf900-0xf90f]
    [ 0.103876] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
    [ 0.103890] pci 0000:00:1f.2: reg 0x10: [io 0xf800-0xf807]
    [ 0.103899] pci 0000:00:1f.2: reg 0x14: [io 0xf700-0xf703]
    [ 0.103907] pci 0000:00:1f.2: reg 0x18: [io 0xf600-0xf607]
    [ 0.103915] pci 0000:00:1f.2: reg 0x1c: [io 0xf500-0xf503]
    [ 0.103923] pci 0000:00:1f.2: reg 0x20: [io 0xf400-0xf40f]
    [ 0.103932] pci 0000:00:1f.2: reg 0x24: [mem 0xfdffc000-0xfdffc3ff]
    [ 0.103961] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.104042] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
    [ 0.104093] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
    [ 0.104236] pci 0000:01:00.0: [1002:7181] type 00 class 0x030000
    [ 0.104251] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.104262] pci 0000:01:00.0: reg 0x18: [mem 0xfddf0000-0xfddfffff 64bit]
    [ 0.104270] pci 0000:01:00.0: reg 0x20: [io 0xce00-0xceff]
    [ 0.104283] pci 0000:01:00.0: reg 0x30: [mem 0xfddc0000-0xfdddffff pref]
    [ 0.104314] pci 0000:01:00.0: supports D1 D2
    [ 0.104362] pci 0000:01:00.1: [1002:71a1] type 00 class 0x038000
    [ 0.104373] pci 0000:01:00.1: reg 0x10: [mem 0xfdde0000-0xfddeffff 64bit]
    [ 0.104417] pci 0000:01:00.1: supports D1 D2
    [ 0.104457] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.104466] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.104470] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
    [ 0.104473] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfddfffff]
    [ 0.104477] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.104526] pci 0000:02:01.0: [11c1:5811] type 00 class 0x0c0010
    [ 0.104543] pci 0000:02:01.0: reg 0x10: [mem 0xfdeff000-0xfdefffff]
    [ 0.104616] pci 0000:02:01.0: supports D1 D2
    [ 0.104619] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot
    [ 0.104672] pci 0000:02:04.0: [1102:0002] type 00 class 0x040100
    [ 0.104690] pci 0000:02:04.0: reg 0x10: [io 0xdf00-0xdf1f]
    [ 0.104763] pci 0000:02:04.0: supports D1 D2
    [ 0.104806] pci 0000:02:04.1: [1102:7002] type 00 class 0x098000
    [ 0.104822] pci 0000:02:04.1: reg 0x10: [io 0xde00-0xde07]
    [ 0.104895] pci 0000:02:04.1: supports D1 D2
    [ 0.104946] pci 0000:02:05.0: [168c:0013] type 00 class 0x020000
    [ 0.104964] pci 0000:02:05.0: reg 0x10: [mem 0xfdee0000-0xfdeeffff]
    [ 0.105084] pci 0000:02:08.0: [8086:27dc] type 00 class 0x020000
    [ 0.105101] pci 0000:02:08.0: reg 0x10: [mem 0xfdefe000-0xfdefefff]
    [ 0.105112] pci 0000:02:08.0: reg 0x14: [io 0xdd00-0xdd3f]
    [ 0.105176] pci 0000:02:08.0: supports D1 D2
    [ 0.105178] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.105247] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
    [ 0.105252] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
    [ 0.105256] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.105262] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.105264] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
    [ 0.105612] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11 12 14 15)
    [ 0.105678] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
    [ 0.105743] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 9 10 11 12 14 15)
    [ 0.105807] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    [ 0.105870] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    [ 0.105934] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.105998] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.106063] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
    [ 0.106250] ACPI: Enabled 2 GPEs in block 00 to 1F
    [ 0.106258] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.106290] Found 1 acpi root devices
    [ 0.106365] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.106365] vgaarb: loaded
    [ 0.106365] vgaarb: bridge control possible 0000:01:00.0
    [ 0.106365] PCI: Using ACPI for IRQ routing
    [ 0.106365] PCI: pci_cache_line_size set to 64 bytes
    [ 0.106365] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
    [ 0.106365] e820: reserve RAM buffer [mem 0x7fedf800-0x7fffffff]
    [ 0.106365] NetLabel: Initializing
    [ 0.106365] NetLabel: domain hash size = 128
    [ 0.106365] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.106365] NetLabel: unlabeled traffic allowed by default
    [ 0.106365] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.106365] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.106365] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.106689] Switched to clocksource hpet
    [ 0.109999] pnp: PnP ACPI init
    [ 0.109999] ACPI: bus type PNP registered
    [ 0.113399] system 00:00: [io 0x04d0-0x04d1] has been reserved
    [ 0.113403] system 00:00: [io 0x0800-0x087f] has been reserved
    [ 0.113406] system 00:00: [io 0x0294-0x0297] has been reserved
    [ 0.113408] system 00:00: [io 0x0880-0x088f] has been reserved
    [ 0.113413] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.113426] pnp 00:01: [dma 4]
    [ 0.113459] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.113547] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.113597] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.113626] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.113664] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.113790] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
    [ 0.113848] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.113911] system 00:08: [io 0x0400-0x04bf] has been reserved
    [ 0.113915] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.113958] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.114177] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.114182] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.114356] system 00:0b: [mem 0x000cf400-0x000cffff] has been reserved
    [ 0.114359] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
    [ 0.114362] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
    [ 0.114365] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
    [ 0.114368] system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved
    [ 0.114371] system 00:0b: [mem 0x7fee0000-0x7fefffff] could not be reserved
    [ 0.114374] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.114377] system 00:0b: [mem 0x00100000-0x7fedffff] could not be reserved
    [ 0.114380] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.114382] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.114385] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
    [ 0.114388] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
    [ 0.114390] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
    [ 0.114394] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.114404] pnp: PnP ACPI: found 12 devices
    [ 0.114405] ACPI: bus type PNP unregistered
    [ 0.120198] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.120198] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
    [ 0.120198] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfddfffff]
    [ 0.120198] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.120198] pci 0000:00:1e.0: PCI bridge to [bus 02]
    [ 0.120198] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
    [ 0.120198] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.120198] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.120198] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
    [ 0.120198] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
    [ 0.120198] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
    [ 0.120198] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.120198] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
    [ 0.120198] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
    [ 0.120198] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
    [ 0.120198] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
    [ 0.120198] NET: Registered protocol family 2
    [ 0.120198] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.120198] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
    [ 0.120198] TCP: Hash tables configured (established 16384 bind 16384)
    [ 0.120198] TCP: reno registered
    [ 0.120198] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.120198] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.120198] NET: Registered protocol family 1
    [ 0.120198] pci 0000:01:00.0: Boot video device
    [ 0.120198] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
    [ 0.120198] PCI: CLS 32 bytes, default 64
    [ 0.120198] Unpacking initramfs...
    [ 0.191296] Freeing initrd memory: 3084K (ffff8800379ea000 - ffff880037ced000)
    [ 0.191480] Scanning for low memory corruption every 60 seconds
    [ 0.191882] audit: initializing netlink socket (disabled)
    [ 0.191902] type=2000 audit(1396428835.189:1): initialized
    [ 0.206560] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.208164] zbud: loaded
    [ 0.208353] VFS: Disk quotas dquot_6.5.2
    [ 0.208404] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.208606] msgmni has been set to 4004
    [ 0.208673] Key type big_key registered
    [ 0.208929] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.208971] io scheduler noop registered
    [ 0.208973] io scheduler deadline registered
    [ 0.209007] io scheduler cfq registered (default)
    [ 0.209208] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.209282] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.209302] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.209360] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
    [ 0.209362] vesafb: scrolling: redraw
    [ 0.209364] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 0.209895] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004400000, using 5824k, total 5824k
    [ 0.265490] Console: switching to colour frame buffer device 175x65
    [ 0.320013] fb0: VESA VGA frame buffer device
    [ 0.320013] intel_idle: does not run on family 6 model 15
    [ 0.320013] GHES: HEST is not enabled!
    [ 0.320771] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.321201] Linux agpgart interface v0.103
    [ 0.321270] rtc_cmos 00:03: RTC can wake from S4
    [ 0.321402] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.321430] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.321540] drop_monitor: Initializing network drop monitor service
    [ 0.321607] TCP: cubic registered
    [ 0.321718] NET: Registered protocol family 10
    [ 0.321912] NET: Registered protocol family 17
    [ 0.321924] Key type dns_resolver registered
    [ 0.322165] registered taskstats version 1
    [ 0.322582] Magic number: 10:872:926
    [ 0.322659] rtc_cmos 00:03: setting system clock to 2014-04-02 08:54:05 UTC (1396428845)
    [ 0.322694] PM: Hibernation image not present or could not be loaded.
    [ 0.324137] Freeing unused kernel memory: 1124K (ffffffff818d3000 - ffffffff819ec000)
    [ 0.324139] Write protecting the kernel read-only data: 8192k
    [ 0.326967] Freeing unused kernel memory: 860K (ffff880001529000 - ffff880001600000)
    [ 0.327354] Freeing unused kernel memory: 372K (ffff8800017a3000 - ffff880001800000)
    [ 0.335950] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.337560] systemd-udevd[46]: starting version 212
    [ 0.357062] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.360689] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.360743] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.364815] ACPI: bus type USB registered
    [ 0.364858] usbcore: registered new interface driver usbfs
    [ 0.364871] usbcore: registered new interface driver hub
    [ 0.367300] usbcore: registered new device driver usb
    [ 0.367497] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.367497] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.367497] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.369227] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    [ 0.369272] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
    [ 0.370097] hub 1-0:1.0: USB hub found
    [ 0.370108] hub 1-0:1.0: 2 ports detected
    [ 0.370356] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.370364] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    [ 0.370398] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
    [ 0.370561] hub 2-0:1.0: USB hub found
    [ 0.370570] hub 2-0:1.0: 2 ports detected
    [ 0.370923] ehci-pci: EHCI PCI platform driver
    [ 0.371254] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.371263] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    [ 0.371299] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
    [ 0.371479] hub 3-0:1.0: USB hub found
    [ 0.371489] hub 3-0:1.0: 2 ports detected
    [ 0.371685] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 0.371695] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
    [ 0.371731] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
    [ 0.371759] SCSI subsystem initialized
    [ 0.372294] hub 4-0:1.0: USB hub found
    [ 0.372721] hub 4-0:1.0: 2 ports detected
    [ 0.373567] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [ 0.373575] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
    [ 0.380063] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
    [ 0.380074] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdfff000
    [ 0.380372] libata version 3.00 loaded.
    [ 0.392071] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.392288] hub 5-0:1.0: USB hub found
    [ 0.392298] hub 5-0:1.0: 8 ports detected
    [ 0.413670] hub 1-0:1.0: USB hub found
    [ 0.413685] hub 1-0:1.0: 2 ports detected
    [ 0.418065] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.428408] firewire_ohci 0000:02:01.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
    [ 0.444932] hub 2-0:1.0: USB hub found
    [ 0.444946] hub 2-0:1.0: 2 ports detected
    [ 0.475276] hub 3-0:1.0: USB hub found
    [ 0.475295] hub 3-0:1.0: 2 ports detected
    [ 0.498283] hub 4-0:1.0: USB hub found
    [ 0.498296] hub 4-0:1.0: 2 ports detected
    [ 0.498418] ata_piix 0000:00:1f.1: version 2.13
    [ 0.499273] scsi0 : ata_piix
    [ 0.499357] scsi1 : ata_piix
    [ 0.499402] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
    [ 0.499404] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
    [ 0.499515] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [ 0.499556] ata2: port disabled--ignoring
    [ 0.500252] scsi2 : ata_piix
    [ 0.500325] scsi3 : ata_piix
    [ 0.500368] ata3: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
    [ 0.500371] ata4: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
    [ 0.699056] ata4.01: NODEV after polling detection
    [ 0.705789] ata4.00: ATAPI: HL-DT-STDVDRRW GSA-H30L, S755, max UDMA/33
    [ 0.705879] ata1.00: ATA-7: Hitachi HDT725032VLAT80, V54OA42A, max UDMA/133
    [ 0.705882] ata1.00: 625142448 sectors, multi 16: LBA48
    [ 0.705886] ata1.00: limited to UDMA/33 due to 40-wire cable
    [ 0.718854] ata4.00: configured for UDMA/33
    [ 0.721647] ata1.00: configured for UDMA/33
    [ 0.721797] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
    [ 0.725607] ata3.00: ATA-8: SAMSUNG HD320KJ, CP100-10, max UDMA7
    [ 0.725612] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 0.734331] ata3.00: configured for UDMA/133
    [ 0.734447] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD320KJ CP10 PQ: 0 ANSI: 5
    [ 0.736470] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRRW GSA-H30L S755 PQ: 0 ANSI: 5
    [ 0.739885] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 0.739947] sd 0:0:0:0: [sda] Write Protect is off
    [ 0.739950] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 0.739977] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 0.740339] sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 0.740397] sd 2:0:0:0: [sdb] Write Protect is off
    [ 0.740400] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 0.740426] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 0.743908] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 0.743912] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 0.744145] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [ 0.748725] sdb: sdb1 sdb2
    [ 0.749036] sd 2:0:0:0: [sdb] Attached SCSI disk
    [ 0.752217] usb 5-6: new high-speed USB device number 2 using ehci-pci
    [ 0.778689] sda: sda1 sda2 sda3 sda4
    [ 0.779129] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 0.929217] firewire_core 0000:02:01.0: created device fw0: GUID 0011d800013adf24, S400
    [ 1.006684] usb 5-7: new high-speed USB device number 3 using ehci-pci
    [ 1.173252] usb-storage 5-7:1.0: USB Mass Storage device detected
    [ 1.173332] scsi4 : usb-storage 5-7:1.0
    [ 1.173427] usbcore: registered new interface driver usb-storage
    [ 1.197356] tsc: Refined TSC clocksource calibration: 2133.939 MHz
    [ 1.616813] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
    [ 1.624951] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.920203] random: nonblocking pool is initialized
    [ 2.247183] Switched to clocksource tsc
    [ 2.253827] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
    [ 2.260322] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
    [ 2.266946] scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
    [ 2.273571] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
    [ 2.280559] sd 4:0:0:0: [sdc] Attached SCSI removable disk
    [ 2.281310] sd 4:0:0:1: [sdd] Attached SCSI removable disk
    [ 2.282059] sd 4:0:0:2: [sde] Attached SCSI removable disk
    [ 2.282809] sd 4:0:0:3: [sdf] Attached SCSI removable disk
    [ 2.498874] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
    [ 2.499029] systemd[1]: Detected architecture 'x86-64'.
    [ 2.499095] systemd[1]: No hostname configured.
    [ 2.499100] systemd[1]: Set hostname to <localhost>.
    [ 3.019084] systemd[1]: Configuration file /etc/systemd/system/netctl@ethernet\x2dstatic.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
    [ 3.052564] systemd[1]: Configuration file /etc/systemd/system/netctl@my\x2dnetwork.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
    [ 3.168175] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 3.168523] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.168587] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.168600] systemd[1]: Expecting device sys-subsystem-net-devices-enp2s8.device...
    [ 3.168617] systemd[1]: Starting Remote File Systems.
    [ 3.168629] systemd[1]: Reached target Remote File Systems.
    [ 3.168639] systemd[1]: Expecting device sys-subsystem-net-devices-wlp2s5.device...
    [ 3.168655] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.168691] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.168701] systemd[1]: Starting Paths.
    [ 3.168712] systemd[1]: Reached target Paths.
    [ 3.168722] systemd[1]: Starting Encrypted Volumes.
    [ 3.168732] systemd[1]: Reached target Encrypted Volumes.
    [ 3.168756] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.168851] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.168865] systemd[1]: Expecting device dev-sda4.device...
    [ 3.168877] systemd[1]: Expecting device dev-disk-by\x2duuid-8e743759\x2dc6f4\x2d4e8f\x2dae25\x2d2c24a8cba618.device...
    [ 3.168890] systemd[1]: Expecting device dev-disk-by\x2duuid-c96171f5\x2d9704\x2d4abf\x2d84ae\x2d2c4f78252a60.device...
    [ 3.168900] systemd[1]: Expecting device dev-disk-by\x2duuid-12EC23D6EC23B341.device...
    [ 3.168911] systemd[1]: Starting Root Slice.
    [ 3.175997] systemd[1]: Created slice Root Slice.
    [ 3.176010] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.176047] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.176058] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.176087] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.176098] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.176119] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.176133] systemd[1]: Starting udev Kernel Socket.
    [ 3.176155] systemd[1]: Listening on udev Kernel Socket.
    [ 3.176169] systemd[1]: Starting udev Control Socket.
    [ 3.176193] systemd[1]: Listening on udev Control Socket.
    [ 3.176203] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.176232] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.176243] systemd[1]: Starting User and Session Slice.
    [ 3.176438] systemd[1]: Created slice User and Session Slice.
    [ 3.176452] systemd[1]: Starting Journal Socket.
    [ 3.176501] systemd[1]: Listening on Journal Socket.
    [ 3.176518] systemd[1]: Starting System Slice.
    [ 3.176712] systemd[1]: Created slice System Slice.
    [ 3.176728] systemd[1]: Started File System Check on Root Device.
    [ 3.176738] systemd[1]: Starting system-systemd\x2dfsck.slice.
    [ 3.176940] systemd[1]: Created slice system-systemd\x2dfsck.slice.
    [ 3.176954] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 3.212380] systemd[1]: Started Load Kernel Modules.
    [ 3.252481] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 3.253015] systemd[1]: Starting udev Coldplug all Devices...
    [ 3.253553] systemd[1]: Mounted FUSE Control File System.
    [ 3.253577] systemd[1]: Mounting Configuration File System...
    [ 3.254197] systemd[1]: Starting Setup Virtual Console...
    [ 3.254782] systemd[1]: Mounting Debug File System...
    [ 3.255307] systemd[1]: Mounting Huge Pages File System...
    [ 3.285128] systemd[1]: Starting Apply Kernel Variables...
    [ 3.285663] systemd[1]: Starting system-netctl.slice.
    [ 3.285916] systemd[1]: Created slice system-netctl.slice.
    [ 3.285940] systemd[1]: Starting system-getty.slice.
    [ 3.286240] systemd[1]: Created slice system-getty.slice.
    [ 3.286797] systemd[1]: Started Set Up Additional Binary Formats.
    [ 3.286822] systemd[1]: Mounting POSIX Message Queue File System...
    [ 3.287292] systemd[1]: Starting Journal Service...
    [ 3.287880] systemd[1]: Started Journal Service.
    [ 4.510133] EXT4-fs (sda2): re-mounted. Opts: data=ordered
    [ 4.568872] systemd-udevd[136]: starting version 212
    [ 5.479614] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 5.479621] ACPI: Power Button [PWRB]
    [ 5.479693] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 5.479697] ACPI: Power Button [PWRF]
    [ 5.490126] thermal LNXTHERM:00: registered as thermal_zone0
    [ 5.490129] ACPI: Thermal Zone [THRM] (19 C)
    [ 5.629665] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PM2S 1 (20131115/utaddress-251)
    [ 5.629673] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PM1K 2 (20131115/utaddress-251)
    [ 5.629677] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPE1 3 (20131115/utaddress-251)
    [ 5.629682] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 5.629685] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPO2 1 (20131115/utaddress-251)
    [ 5.629689] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 5.629691] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPIV 1 (20131115/utaddress-251)
    [ 5.629695] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPO_ 2 (20131115/utaddress-251)
    [ 5.629699] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \PALD 3 (20131115/utaddress-251)
    [ 5.629703] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 5.629705] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 5.639853] leds_ss4200: no LED devices found
    [ 5.687416] ACPI: Fan [FAN] (on)
    [ 5.708079] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 5.931908] cfg80211: Calling CRDA to update world regulatory domain
    [ 6.109750] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    [ 6.109754] e100: Copyright(c) 1999-2006 Intel Corporation
    [ 6.133562] e100 0000:02:08.0 eth0: addr 0xfdefe000, irq 20, MAC addr 00:1a:92:de:71:43
    [ 6.410441] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 6.599698] gameport gameport0: EMU10K1 is pci0000:02:04.1/gameport0, io 0xde00, speed 980kHz
    [ 6.659464] [drm] Initialized drm 1.1.0 20060810
    [ 6.722900] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 6.926377] iTCO_vendor_support: vendor-support=0
    [ 6.963443] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 6.963473] iTCO_wdt: Found a ICH7DH TCO device (Version=2, TCOBASE=0x0460)
    [ 6.963581] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 7.184227] Adding 4286784k swap on /dev/sda4. Priority:-1 extents:1 across:4286784k FS
    [ 7.195727] microcode: CPU0 sig=0x6f6, pf=0x1, revision=0xc6
    [ 7.263090] rtl8192cu: Chip version 0x11
    [ 7.334816] ath5k 0000:02:05.0: registered as 'phy1'
    [ 7.352471] rtl8192cu: MAC address: 80:1f:02:af:89:eb
    [ 7.352477] rtl8192cu: Board Type 0
    [ 7.352718] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
    [ 7.352752] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
    [ 7.352808] usbcore: registered new interface driver rtl8192cu
    [ 7.445824] [drm] radeon kernel modesetting enabled.
    [ 7.445878] checking generic (e0000000 5b0000) vs hw (e0000000 10000000)
    [ 7.445880] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
    [ 7.316873] systemd-udevd[150]: renamed network interface eth0 to enp2s8
    [ 7.445900] Console: switching
    [ 7.445902] to colour dummy device 80x25
    [ 7.446670] [drm] initializing kernel modesetting (RV515 0x1002:0x7181 0x1462:0x0400).
    [ 7.446689] [drm] register mmio base: 0xFDDF0000
    [ 7.446691] [drm] register mmio size: 65536
    [ 7.446807] ATOM BIOS: 113
    [ 7.446821] [drm] Generation 2 PCI interface, using max accessible memory
    [ 7.446827] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [ 7.446830] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
    [ 7.446845] [drm] Detected VRAM RAM=512M, BAR=256M
    [ 7.446847] [drm] RAM width 128bits DDR
    [ 7.446916] [TTM] Zone kernel: Available graphics memory: 1026428 kiB
    [ 7.446918] [TTM] Initializing pool allocator
    [ 7.446923] [TTM] Initializing DMA pool allocator
    [ 7.446942] [drm] radeon: 512M of VRAM memory ready
    [ 7.446944] [drm] radeon: 512M of GTT memory ready.
    [ 7.446965] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [ 7.458262] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
    [ 7.459147] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [ 7.459171] radeon 0000:01:00.0: WB enabled
    [ 7.459176] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000000 and cpu addr 0xffff88007bb31000
    [ 7.459179] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 7.459180] [drm] Driver supports precise vblank timestamp query.
    [ 7.459192] [drm] radeon: irq initialized.
    [ 7.459208] [drm] Loading R500 Microcode
    [ 7.476935] platform microcode: Direct firmware load failed with error -2
    [ 7.476939] platform microcode: Falling back to user helper
    [ 7.477387] microcode: CPU1 sig=0x6f6, pf=0x1, revision=0xc6
    [ 7.477402] platform microcode: Direct firmware load failed with error -2
    [ 7.477405] platform microcode: Falling back to user helper
    [ 7.477982] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 7.503453] [drm] radeon: ring at 0x0000000020001000
    [ 7.503490] [drm] ring test succeeded in 6 usecs
    [ 7.503671] [drm] ib test succeeded in 0 usecs
    [ 7.503948] [drm] Radeon Display Connectors
    [ 7.503950] [drm] Connector 0:
    [ 7.503951] [drm] DVI-I-1
    [ 7.503953] [drm] HPD2
    [ 7.503955] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [ 7.503957] [drm] Encoders:
    [ 7.503958] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 7.503960] [drm] DFP3: INTERNAL_LVTM1
    [ 7.503961] [drm] Connector 1:
    [ 7.503963] [drm] SVIDEO-1
    [ 7.503964] [drm] Encoders:
    [ 7.503965] [drm] TV1: INTERNAL_KLDSCP_DAC2
    [ 7.503967] [drm] Connector 2:
    [ 7.503968] [drm] DVI-I-2
    [ 7.503969] [drm] HPD1
    [ 7.503971] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
    [ 7.503973] [drm] Encoders:
    [ 7.503974] [drm] CRT2: INTERNAL_KLDSCP_DAC2
    [ 7.503976] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
    [ 7.583351] [drm] fb mappable at 0xE00C0000
    [ 7.583351] [drm] vram apper at 0xE0000000
    [ 7.583351] [drm] size 7258112
    [ 7.583351] [drm] fb depth is 24
    [ 7.583351] [drm] pitch is 6912
    [ 7.583719] fbcon: radeondrmfb (fb0) is primary device
    [ 7.600235] Console: switching to colour frame buffer device 210x65
    [ 7.605874] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [ 7.605877] radeon 0000:01:00.0: registered panic notifier
    [ 7.605883] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
    [ 7.625781] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
    [ 7.626479] rtlwifi: wireless switch is on
    [ 7.642639] fuse init (API version 7.22)
    [ 7.647140] ath: EEPROM regdomain: 0x0
    [ 7.647144] ath: EEPROM indicates default country code should be used
    [ 7.647146] ath: doing EEPROM country->regdmn map search
    [ 7.647149] ath: country maps to regdmn code: 0x3a
    [ 7.647151] ath: Country alpha2 being used: US
    [ 7.647153] ath: Regpair used: 0x3a
    [ 7.647274] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
    [ 7.647537] ath5k: phy1: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41)
    [ 7.647540] ath5k: phy1: RF5111 5GHz radio found (0x17)
    [ 7.647543] ath5k: phy1: RF2111 2GHz radio found (0x23)
    [ 7.709874] systemd-udevd[143]: renamed network interface wlan1 to wlp2s5
    [ 8.136233] systemd-udevd[141]: renamed network interface wlan0 to wlp0s29f7u6
    [ 8.322562] coretemp coretemp.0: Using relative temperature scale!
    [ 8.322706] coretemp coretemp.0: Using relative temperature scale!
    [ 8.594743] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
    [ 8.638575] mousedev: PS/2 mouse device common for all mice
    [ 9.284691] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
    [ 9.328865] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 10.357627] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
    [ 10.363499] e100 0000:02:08.0 enp2s8: NIC Link is Up 100 Mbps Full Duplex
    [ 10.363772] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s8: link becomes ready
    [ 10.865860] systemd-journald[119]: Received request to flush runtime journal from PID 1
    [ 11.002834] rtl8192cu: MAC auto ON okay!
    [ 11.035475] rtl8192cu: Tx queue select: 0x05
    [ 11.407281] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
    [ 12.592937] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
    [ 12.617024] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
    [ 12.654273] wlp0s29f7u6: authenticated
    [ 12.659239] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
    [ 12.663526] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
    [ 12.663558] wlp0s29f7u6: associated
    [ 12.663598] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
    [ 216.768500] perf samples too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
    [ 295.526133] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
    [ 295.538508] cfg80211: Calling CRDA for country: US
    [ 295.779488] rtl8192cu: MAC auto ON okay!
    [ 295.813132] rtl8192cu: Tx queue select: 0x05
    [ 296.188680] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
    [ 297.158587] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
    [ 297.171430] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
    [ 297.181575] wlp0s29f7u6: authenticated
    [ 297.185043] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
    [ 297.198798] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
    [ 297.198839] wlp0s29f7u6: associated
    [ 297.198885] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
    [ 466.957760] perf samples too long (4993 > 4990), lowering kernel.perf_event_max_sample_rate to 25200
    [ 653.237523] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
    [ 653.252189] cfg80211: Calling CRDA for country: GB
    [ 653.492515] rtl8192cu: MAC auto ON okay!
    [ 653.526155] rtl8192cu: Tx queue select: 0x05
    [ 653.902071] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
    [ 654.830321] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
    [ 654.843456] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
    [ 654.863972] wlp0s29f7u6: authenticated
    [ 654.867473] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
    [ 654.879214] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
    [ 654.879258] wlp0s29f7u6: associated
    [ 654.879319] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
    [ 845.720733] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
    [ 845.733072] cfg80211: Calling CRDA to update world regulatory domain
    [ 845.972288] rtl8192cu: MAC auto ON okay!
    [ 846.005180] rtl8192cu: Tx queue select: 0x05
    [ 846.376969] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
    [ 847.303644] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
    [ 847.316223] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
    [ 847.341107] wlp0s29f7u6: authenticated
    [ 847.345443] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
    [ 847.369345] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
    [ 847.369380] wlp0s29f7u6: associated
    [ 847.369422] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
    [ 1165.243225] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
    [ 1165.255458] cfg80211: Calling CRDA for country: GB
    [ 1165.501950] rtl8192cu: MAC auto ON okay!
    [ 1165.534590] rtl8192cu: Tx queue select: 0x05
    [ 1165.906506] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
    [ 1166.922571] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
    [ 1166.935133] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
    [ 1166.962884] wlp0s29f7u6: authenticated
    [ 1166.963550] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
    [ 1166.969384] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
    [ 1166.969418] wlp0s29f7u6: associated
    [ 1166.969455] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
    [ 1317.334883] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
    [ 1317.347568] cfg80211: Calling CRDA to update world regulatory domain
    [ 1317.593153] rtl8192cu: MAC auto ON okay!
    [ 1317.625922] rtl8192cu: Tx queue select: 0x05
    [ 1318.002339] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
    [ 1318.943694] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
    [ 1318.959587] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
    [ 1318.961335] wlp0s29f7u6: authenticated
    [ 1318.965144] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
    [ 1318.988340] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
    [ 1318.988376] wlp0s29f7u6: associated
    [ 1318.988421] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
    [ 1469.086853] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
    [ 1469.099248] cfg80211: Calling CRDA to update world regulatory domain
    [ 1469.337346] rtl8192cu: MAC auto ON okay!
    [ 1469.370119] rtl8192cu: Tx queue select: 0x05
    [ 1469.742158] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
    [ 1470.673984] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
    [ 1470.686540] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
    [ 1470.691410] wlp0s29f7u6: authenticated
    [ 1470.693241] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
    [ 1470.702651] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
    [ 1470.702687] wlp0s29f7u6: associated
    [ 1470.702728] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
    [ 1680.753182] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
    [ 1680.765752] cfg80211: Calling CRDA for country: GB
    [ 1680.998495] rtl8192cu: MAC auto ON okay!
    [ 1681.031255] rtl8192cu: Tx queue select: 0x05
    [ 1681.406799] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
    [ 1682.318347] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
    [ 1682.330930] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
    [ 1682.342673] wlp0s29f7u6: authenticated
    [ 1682.343689] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
    [ 1682.350924] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
    [ 1682.350956] wlp0s29f7u6: associated
    [ 1682.350994] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
    [ 2206.980860] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
    [ 2206.993170] cfg80211: Calling CRDA to update world regulatory domain
    [ 2207.227511] rtl8192cu: MAC auto ON okay!
    [ 2207.260157] rtl8192cu: Tx queue select: 0x05
    [ 2207.631823] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
    [ 2208.565086] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
    [ 2208.577695] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
    [ 2208.585581] wlp0s29f7u6: authenticated
    [ 2208.587355] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
    [ 2208.616071] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
    [ 2208.616112] wlp0s29f7u6: associated
    [ 2208.616155] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
    [ 2504.014135] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
    [ 2504.026462] cfg80211: Calling CRDA to update world regulatory domain
    [ 2504.273688] rtl8192cu: MAC auto ON okay!
    [ 2504.309828] rtl8192cu: Tx queue select: 0x05
    [ 2504.702760] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
    [ 2505.627571] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
    [ 2505.640510] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
    [ 2505.649754] wlp0s29f7u6: authenticated
    [ 2505.650508] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
    [ 2505.680782] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
    [ 2505.680831] wlp0s29f7u6: associated
    [ 2505.680887] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
    [ 2948.553142] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
    [ 2948.565823] cfg80211: Calling CRDA for country: GB
    [ 2948.814051] rtl8192cu: MAC auto ON okay!
    [ 2948.846690] rtl8192cu: Tx queue select: 0x05
    [ 2949.220485] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
    [ 2950.173570] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
    [ 2950.186113] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
    [ 2950.190241] wlp0s29f7u6: authenticated
    If there is anything else I can provide that may help please ask, this has been driving me mad for days now!

    Looks like a driver bug. You could try multiple things, as a start:
    - switch channel
    - toggle encryption
    - different usb port

  • [SOLVED] usb archlinux boot goes black hanging

    Hi
    I have a thinkpad Edge e330 3354. Currently i have grub2 with ubuntu and win8 dual booting. I want to replace ubuntu with arch. I found out i had UEFI so i followed the instructions to install UEFI version of usb installer. However whenever i boot my usb i can choose the 3 options:
    Archlinux
    shell1
    shell2
    and after picking arch it just hangs in black screen infinitely
    Appreciate the help, thanks!
    edit: I missed trying to add kernel parameters, i just did this with nomodeset, and also tried the SVIDEO one, no luck
    Last edited by addrae (2013-03-21 20:30:47)

    cliffordsr wrote:Quite possible a problem with SecureBoot (something Windows 8 does for security); try going into your BIOS and setting all categories in SecureBoot to "Allow Execute." Not sure where it will be for you; for me (on Clevo P150em aka Sager NP9130) it was under securtiy -> custom settings for secure boot (that's paraphrased) -> image execution policies (also paraphrased) -> "allow execute" for all (except for the top one--internal something or other--which should be left as is: on "always execute").
    -Cliff
    Is it for security, or to gain control of the market?!  DUN DUN DUNNnn...
    #conspiracy

  • Xdock Output Cable (USB to RCA?)

    I own a Xdock base?unit transmitter that has optical audio out and USB out. I want just plain RCA on mini jack audio out. The unit also has Svideo out.
    Is there a USB to RCA cable available? If not how do I get the audio out to a old fashion non surround stereo.
    I do not want to use the receiver unit for this. (has RCA out)? Any help would be appreciated. Thank you.

    bchestnut wrote:
    I would like to view what I'm seeing on my computer screen on my television.  I don't have an S-Video output on my laptop.  Is there a way to connect my laptop to the television using my USB port on my computer and RCA inputs on my television?
    No such connection exist, but having an S-video out on your laptop does at least give you some options.
    As Startflyer already said, the quality will be poor, but using the S-video output is your best bet for now. Most modern LCD/Plasma HD sets have VGA inputs. That method of connection would be much better.
    Disclosure: Former BBY employee.

  • How to configure USB camera if it is not Directshow image

    Hi, 
    I am using NI-IMAQ for USB to grab videos from Dazzle DVC170 of Pinnacle. There is an error showing system error, see the attached file. Someone answered that it is because my USB device is not a directshow image one. In fact, Dazzle DVC 170 connects camcorders with computer. There is Svideo output connecting camcorder and a USB connecting computer. If in this case, VISA can be used to configure USB and grab video? Thanks. 
    Solved!
    Go to Solution.
    Attachments:
    error2.JPG ‏100 KB

    Hi,
    For firewire connection, there is no connection on my camcorder but S video output connection. I am wondering if we can buy a firewire card to transport video and use IMAQ for USB to control this firewire or other IMAQ module to control it. In fact, I went to Bestbuy to ask about this. But the sales person told me that the firewire card can only transport video but can not be controled. I am wondering the problem with firewire card is there is no driver for this so we can not control it. Is it right?
    Thanks.

  • Télécharger film sur clé USB ou ordi sur ipad

    Bonjour,
    Je suis une addict d'Apple depuis longtemps mais je n'arrive jamais à télécharger un film (sur clé USB ou ordi) sur l'Ipad.
    Pourriez-vous m'expliquer clairement :-) la "procédure" ?
    Merci beaucoup.
    JulyK

    Il semble possible de utilser MPEG Streamclip - voir:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    L'application est gratuite.
    (.mod est actuellemnt equivalent à .mpg)
    Geoff.

  • Can't connect to pinnacle 710-usb

    has anyone been able to encode from the pinnacle 710-usb?
    I've gotten other usb devices to work. I tried both a component and
    svideo connection from my device to the pinnacle but no
    luck.

    called a client that attempts to connect to Flash Media I. Server 3.5 through from Flash Media Live Encoder 3 and also not successful with Pinnacle 700-USB, we are in the same.

  • Did my G4 come with a USB cable?

    I just bought a printer and it didn't come with a USB cable. I'm wondering if my mac did...anyone...help?

    Mac Geek:
    i If not I reconmend going to CompUsa or Best Buy or any real computer place.
    I wouldn't recommend them simply based on the prices that they charge for USB cables. Full-spec A-B USB cables are made for 20 cents each in China, but sold for anywhere from $10-25 at retail as Belkin or other name brands. Go there if you need it today, but going for the most expensive cable is probably not something that yields a benefit. BTW - "USB 2.0" cables are also a ripoff if there's a huge premium price. Any "full-spec" USB cable should be capable of transmitting at USB hi-speed data rates although a "certified USB 2.0" cable at a slightly higher price isn't too big a deal.
    I've bought full-spec USB cables for $1 online. You can find tons of retailers at Yahoo shopping that have full-spec USB cables for less than $2.
    I've had good service for other cables from a company called Videoware (svideo.com). They have free shipping (from Wyoming) which helps if you have a small order. I've bought their S-Video cables as well as my iBook AV cable.
    http://store.yahoo.com/videoware/usb.html
    http://store.yahoo.com/videoware/ibook.html

  • [MOOT] UEFI USB Install (from 201306 image) - blank screen during boot

    I am trying to install Arch Linux on a Lenovo ThinkPad T431s. 
    I created a bootable UEFI USB disk image following the instructions on the wiki.
    https://wiki.archlinux.org/index.php/UE … B_from_ISO
    Attempting to boot from this image I get to a screen that looks like:
    Arch Linux archiso x86_64 UEFI USB
    UEFI Shell x86_64 v1
    UEFI Shell x86_64 v2
    After selecting the first option, I get a blank screen.
    This appears to be the same (or very similar) to the following issues:
    [1] https://bbs.archlinux.org/viewtopic.php?id=151599
    [2] https://bbs.archlinux.org/viewtopic.php?id=158530
    As suggested by
    https://wiki.archlinux.org/index.php/Beginners'_Guide#Preparation
    I tried appending a number of things to the initrd line
    nomodeset
    video=SVIDEO-1:d
    i915.modeset=0
    with no success (the blank screen was exactly the same).
    Some posts in thread [2] indicated that booting in legacy bios mode worked.  I created a new disk image (again following the wiki instructions: https://wiki.archlinux.org/index.php/US … ion_Media) and was able to confirm that I could successfully boot from this other image after switching into legacy mode.
    In thread [1], there was the suggestion to go into a UEFI shell and try a command like
    Shell > fs0:
    FS0:\ > cd \arch\boot\x86_64
    FS0:\arch\boot\x86_64\ > vmlinuz archisobasedir=arch archisolabel=ARCH_201306 initrd=\arch\boot\x86_64\archiso.img
    which I did.  After pressing enter nothing happened (the screen did not go blank, all the text remained, no messages appeared).
    Eventually in that same thread, a workaround was suggested in this post.  I have not tried this because I was unable to understand what exactly was being done, both because of the terse nature of the post and the fact that the referenced article is not in a language which I read (and google translate did not make it clear enough).  I was unable to evaluate whether that was a sensible thing to do.
    Now, finally, the questions
    Firstly, does anyone have any suggestions about how to solve or troubleshoot my blank screen issue?
    If not, does anyone have an opinion about which of the workarounds (switching into legacy mode or the one that I don't quite understand yet) would be better?  I am not planning to dual boot the system, so I do not need to use UEFI to be win8 friendly, etc.
    Last edited by wesphys (2013-06-07 14:36:28)

    Auric wrote:
    Neri, did you get any further with this? I just got my own Thinkpad Yoga and am facing the same problems. Everything works fine in legacy Boot but the screen stays black on UEFI boot regardless of the known workarounds.
    might it help to first install using legacy boot and later on convert to UEFI?
    Not really with Arch directly anyways. What you can do is:
    1. Use Fedora 20 USB to boot the sucker up
    2. Use Archlinux-bootstrap install (download expand etc)
    3. Use refind as the bootmanager seems to solve the dual boot issues
    ATM i'm fighting a mkinitcpio segfault. But that is after the installation was basically successful.  It would be nice if we can find a way to fix the install medium ...
    EDIT:
    All sorted out. Unfortunately you'll have to bypass the Archlinux Install medium and resort to the fedora 20 installer. I used the XFCE4
    version for a smaller download.
    Here are the basic steps for a Dual-Boot setup:
    In windows (Disk Management) truncate your C: Drive.  I ended up making basically what will became /dev/sda4 smaller and didn't not
    touch any partition or free space before that. Here's the final Layout:
    /dev/sda:
        empty space
    1. recovery partition
    2. ESP
    3. reserved
    4. windows
    5. Linux Root
    6. Linux home
    7. Swap
    The installation happened from within Fedora Live using an Archlinux Boot strap image according to the Wiki for installing from an
    existing Linux and the Wiki Installation Guide.  I mounted /dev/sda2 (aka. the existing ESP partition) as /boot and installed refind
    according to the wiki. Please note, when you install Arch through the archlinux bootstrap method make sure you  pacman -S archlinux-keyring
    in the bootstrap chroot first before you run the pacstrap command - it will accelerate the process tremendously!
    Last edited by neri (2014-01-02 21:40:31)

  • HP LaserJet Enterprise 500 color M551dn - Optional USB Device port

    Hi, I'm hoping to buy the optional wireless print server (HP Jetdirect 2700w USB Wireless Print Server J8026A). There is one problem though, the optional USB device port seems to not exist on my printer. I only notice that the USB logo is present where the port is supposed to be. The plastic in the area is squared off as though it is some sort of break away tab and the port is underneath maybe.
    There is no reference to this in the manual anywhere and I am really unsure how to proceed. I don't want to damage anything.
    If someone experienced with this model (preferably an HP Employee) can confirm the availability of the port and tell me how to access it (Is it a break away tab?). Part of the reason why I bought this printer is the optional Wireless N print server.
    Thank You in advance.

    Thank You for your reply. The port you are talking about is the front panel port for walk-up usb printing and firmware upgrades. This port is indeed available on the higher end LaserJet 500 (NON-MFP, printer only edition) as I just used it to upgrade the firmware. The port I am talking about is the one on the left side in the ports section which you use to plug in the optional print server (not the computer I/O port).
    This is shown in the official manual and the spec sheet so I'm 85% sure the port is there, hp can't advertise and mention something that is not available as this would be a big problem and make the 2700w print server incompatible when it clearly states that it is. I just need someone to confirm the availability and clear my confusion (either from HP, or another owner who bought the wireless print server 2700w).

  • I cant figure out why my HTC Droid DNA is no longer recognized by my computer when i hook it up with the USB cable that came with the phone.

    I used to be able to just plug in my phone with the USB cable to my Windows 7 computer and browse phone storage with no issues. Now my computer sees it as an android phone but when it tries to automatically install the drivers for my phone on the computer, i get an access denied error message. No option on the phone that i can see that allows me to mount phone as a usb drive. This used to work just fine with nothing more than just hooking up the cable. What gives??

        Let's get that access granted again, e_rock_b. The HTC DNA doesn't have a special USB Mass Storage Mode that needs to be turned on. Usually, it's as simple as connecting and browsing http://vz.to/1jktbZD as you mentioned. If your computer is no longer allowing that easy access, try the steps at http://vz.to/1jktvr6.
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • USB Device for IPOD not recognized by Windows, whether ipod connected or no

    During the past few days I have received a pop up error message from (I would think) Windows that the USB device is not recognized. I have the USB plug for the ipod connected (as always)but the ipod isn't even connected. It keeps popping up like every few seconds that the usb device is not recognized.
    When I attach the ipod itself, the ipod is recognizing it because it powers up. But, it took 10 times just to get the ipod to recognize through itunes. It updated, then immediately upon completion, windows again starting giving repeated error messages that the usb device wasn't recognized.
    I have downloaded the newest itunes but I had it on my system for 4 days with no problems whatsoever. I don't think that's it. No other system changes.
    I've deleted my temp files and cache. Also did a "disk clean up" and "defrag." It's still doing it.
    Any suggestions?

    I'm having the same problem. Ever since I upgraded to version 7, iTunes & my PC no longer recognise my iPod, and it therefore won't sync.
    It's not the USB port (other devices work in it), I rebooted my iPod and re-installed iTunes, I've tried stopping and starting the iPod Service (but can't see my iPod in My Computer). When I run the Diagnostics it says iPod connection failed. I've even bought a new USB cable but that doesn't work either.
    This is driving me up the wall. Is there a glitch with iTunes 7?
    Can anyone help me out?? Thanks
      Windows XP  

  • Stuck: Need Disk repair but DVD drive dead and only have USB 1

    [1 Ghz flat-panel iMac with USB 1 ports (no USB 2) and also Firewire 400]
    I noticed a strange discrepancy (small but concerning) between the size of a folder on hard drive (folder of all mp3's with no subfolders) and the backup of the same folder on a mounted thumb drive.
    (The size difference was not due to any invisible .DS_Store files and both folders are displayed in List view format.)
    Disk Utility reports three things:
    1. Incorrect number of thread records
    2. Volume Bit Map needs minor repair
    3. Checking volume information.
              Volume free block count",0)   [I might have mangled this line]
    (It should be 13438611 instead of 13437937)
    Here is the GOOD (but these are useless as explained under the "Bad"):
    - I have a Tiger 10.4 boot DVD for a repair ==>but see below
    - I also have a Disk Warrior disk (never used)
    Here is the BAD:
    - My built-in optical drive [Pioneer DVD-RW DVR-105] is -- I now discover - defunct and DEAD - it does not run the Tiger Boot DVD (in pristine shape).
    - I bought an external SuperDrive (unopened) but I believe no boot from USB 1 is possible in PowerPC so a SuperDrive with USB 1 is useless.
    Questions:
    1.) Is there any way to boot from some external source (optical drive is DEAD) to run Disk Utility and/or Disk Warrior? -- I see none in this case! (gulp).
    2.) More importantly (and this is my fundamental concern): Do the three Disk Utility hard drive issues constitute any direct threat to the integrity of my files?
    I have almost everything backed up to duplicate thumb drives over these many months as standard practice.
    Are these Disk Utility errors fully isolated to hard drive directory-keeping...or do these directory damage errors pose the possibility of mangling or harming my files or their metadata (filesize, etc.).
    Put another way, when files are backed-up from a hard drive under the Disk Utility reports above, do they remain unharmed and undamaged by the situations reported by Disk Utility?
    Thanks,
    Bill

    Jeff and Michael,
    Thank you both for your generous and thoughtful input.
    Michael: As I slept on it overnight, the exact same idea occurred to me of trying a Target Mode to the iMac from my Lion MacbookPro (I have it but stupidly have yet to use it much!).
    I did buy a Firewire 800 (MBP) to Firewire 400 (iMac) adapter cable a few months ago!
    CONCERN: Would there be potential compatibility issues or risks in running Lion 10.7's Disk Utility against the hard drive of the old OSX 10.4 iMac in Target Disk Mode?
    ==> Assuming an "it's ok" answer to the Target Disk question, would the majority of users agree that the Target Disk Mode would be more prudent than running:
    fsck -fy   in Single User Mode
    I have never done fsck -fy before especially because I was under the impression there were issues with Journaled drived but from what I have read today...it looks ok to do)
    Jeff: Can't thank you enough for the reference to the OTW DVD drive. I might first invest $10 in one of those DVD lens cleaner disks that I've read about. It's probably not the issue or else why would the drive read commercial Music cds perfectly well!
    Thanks,
    Bilil

  • How do I install windows from USB on Macbook pro 3,1

    How do I install windows from USB on Macbook pro 3,1 ?
    My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
    - My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
    I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
    Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
    Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
    After rEFIt I booted and then I got this error:
    Starting bootmgr.efi
    Error: Unsupported while loading bootmgr.efi
    I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
    Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
    Point: Nothing is wrong with the windows software, and windows runs fine.
    I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
    Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
    Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
    rEFIt - Booting Legacy OS
    Starting legacy loader
    Using load option ´USB´
    Error: Not found returned from legacy loader
    Error: Not found from LocateDevicePath
    (x 9 times)
    Error: Load Error while (re)opening our installation volume
    The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
    (Hey Apple please send out a updated firmware that fix this issue?!)
    So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ?  Or just run windows on the mac and forget about mac software ? What a stupid solution...

    There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
    This is 5 page thread, so a little more 'meat' to it:
    https://discussions.apple.com/thread/3410900?start=60&tstart=0
    And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
    What you have here seems to be everything and everyone is excluded unless there is a  mac-model device ID string that specifies yes.  An unnecessary hurdle.

Maybe you are looking for

  • Header Fields Layout- Hierarchy of Fields is not proper in Order Proposal

    I have used the BADI  /FRE/IF_EX_UI_RWB_BADI_004~GET_OPTIONAL_HEADER_FIELDS to set the visibility and hierarchy of fields . Currently the layout I am getting is as follows 1 2 3 4 The desired layout is as follows 1  2 3  4

  • Adobe Muse: Is it possible to create a Social Network type website using Muse?

    Hey everyone, So ive recently came up with what i believe to be a pretty nifty idea for a social network type website, but i was just wondering is it possible to create such a website using muse? Ive created a few websites with it but never integrate

  • Using same ip adress for VPN and inside interface

    Hi, I want to know if it's possible on a ASA to use the same IP on the LAN and on the VPN. My user has actually a fixed ip on the LAN and I would like to reuse the same IP when they are connect to the VPN. The target is to allowed/restric the same th

  • ClassCastException in JMS

    Hello All, We have recently migrated from Weblogic 8.1 SP3 to Weblogic 10 MP1 on Solaris. I am getting following error while starting application. <Feb 12, 2009 4:30:03 AM GMT> <Error> <Kernel> <BEA-000802> <ExecuteRequest failed java.lang.ClassCastE

  • Shredding XML with Document... to XMLTable

    Hi, I'm relatively new to XML, so apologies in advanace for any solecisms! I am trying to shred an XML document to a relational table (11g v2). A simplified procedure demonstrating what I am trying to do is below. DECLARE v_xml CLOB := '<?xml version