Using image capure with HP officejet 6200 scanner

is it possible? right now i am having to use the HP provided software.
thanks!

yes drag and drop is an option.
somebody has also written a automator script to make it possible to scan into a file and then use "folder linked script" to put the scanned note into evernote. but i could not make that work
the two scripts are on evernote for mac forum.
thanks for taking the effort to look there and for the post!

Similar Messages

  • Using Image Capture with HP Officejet Pro 8500 A909g

    The printer/scanner shows up twice under the device list in Image Capture.  Select either and I get an error message, "Scanner Session Fails to Open".  The Officejet Pro works ok as a printer.  It is connected to my Mac Desk Pro and to a MacBook Pro, both OS X 10.6.8, via an ethernet hub.  This problem developed recently, I had no problem using the scanner in the past.

    Hello srschoo,
    Welcome to the HP Forums.
    I see that you are having an issue when it comes to scanning.
    I also see that you have attempted to run the HP Print and Scan Doctor.
    One other step that we can try is to go through the steps that are listed in the following document.  " A 'No Scan Options' or 'Scan settings are not set' Message Displays for HP All-in-One Printers When..."
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Using Image Capture with Epson NX420 in 10.5.8

    I have not gotten around to updating my computer to Snow Leopard. My computer usually have two users with fast user switch. Usually the other user tend to have Photoshop open, so I can't use Photoshop(stupid licensing issue even though it is on th SAME computer!) in my account when I need to scan something. So I use Image Capture. I just bought new printer, Epson NX420 using Wifi.
    I can't seem to get Image Capture to use the scanner wirelessly unless I use Epson's own Scan softare. I am pretty partial to the Image Capture cuz it's alot faster.
    Anyway, my point is is there a way that I can get Image Capture to work with the NX420 on 10.5.8 without spending more money?

    I was having this same problem, too. My MacBook Pro w/ Lion could no longer communicate with my Epson Stylus NX420, which seemed to happen randomly as the printer was working fine before.
    I finally searched for the solution and found it! After downloading and installing the latest drivers on my Mac, it is now able to communicate with the printer and prints just fine.
    Hope this helps.

  • IMac applications see my iPhone 5s but cannot display the photos.  Last week I was using Image Capture with no problem.

    I have an iMac 10.8.4 and an iPhone 5s. I recently downloaded 110 photos and 10 very short videos using Image Capture v.6.2.  I plugged the phone into the iMac, all of the photos appeared in Image Capture, I selected all and sent them along to a folder on an external hd. 
    However, this week, attempting the same procedure, I get nothing.  Image Capture sees my phone but does not display any photos, just a big blank window.  Same response from iPhoto, Aperture, and Lightroom; they all recognize the phone but none of the photos appear.  Insight would be appreciated!  Thanks.

    Hello WellShoot,
    Thank you for the details of the issue you are experiencing with importing photos from your Camera Roll using Image Capture.  You have taken some really good steps already to troubleshoot this issue.  The article below has a few additional troubleshooting steps you can take:
    iOS: Unable to import photos to computer
    http://support.apple.com/kb/ts3195
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Using Image Shack with iPhoto '08

    Hi, I just recently purchased a MacBook Pro (will be doing up-to-date; I was fully aware ) and I have a question about iPhoto '08. When I go to upload pictures to Image Shack I used to (iLife 2005) go to finder, then pictures, the iphoto library, then 2007, then to the file, select it, and upload. With '08 it is no more. I only have the option of selecting all 11 GB of iPhoto. Surely there must be a way other than searching the file name to find a photo in the finder!! (I was also wondering if there is a way to use iMovie HD with iLife '08. It is really a huge pain using the new iMovie).
    Thanks a lot!!

    See TD's treatis on file access. It describes several methods of accessing files for use outside of iPhoto. There's a 3rd party application,iMedia Browser, that interfaces with iPhoto, Aperture and any folder on the HD for viewing and selecting photos, i.e. Option-drag the photo to copy it to the the desktop.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Are you using Image Browser with your Mac?

    I am wondering if I am the only one with this problem. It seems that somehow Image Browser doesn't want to get alone with my iMac 10.4.11. I have called Apple tech support deleted, cookies, ran utility disk etc.
    It it didn't help. Every time that I touch Image Browser just to expand the page, the wheel will turn, and turn, and forget it I'm trying to do anything with the thumbnails. And if I am trying to delete a thumbnail there is a delay factor.
    On the other hand, I have no problem using DPP also from Canon but I prefer using I Browser or in conjunction with DPP.
    Please let me know if you had this problem and how you fixed it

    I like the Canon VIXIA HV30 MiniDV High Definition Camcorder
    I use it more with iMovie 06 (need for making DVDs) than with iMovie 09. Works with both using Firewire.
    Why tape? It's cheap and convenient. Tape is patient. I can do it on my schedule. With a hard disk, it can get full at a time that is inconvenient to transfer but I need to do some more shooting. Then I would have to consider the dreaded DELETE of something I shot. With tape I can postphone transfering and editing for months without impairing my camera readiness. After I transfer, I still have the tape.

  • Problems with HP Officejet 4500 scanner

    My scanner is not working. it gives me the following message on the little screen: no scanning options please read instruction manual. 
    Please help me with this as I need my scanner right now. 
    Thank you in advance, 
    Loubnabenk

    Hi @loubnabenk, 
    I see that you are having issues scanning from the printer. I will try my best to help you out.
    Here is some information on How to Scan: From the Control Panel (Including Scan to Email, PDF, or JPEG).
    In Step two, it shows you how to Activate the scan connection to the computer.
    I have provided a document with some steps for communication issues.
    An 'An error occurred while communicating with scanning device' or a 'There is no computer connectio...
    Are you trying to scan a document, photo or scanning to email?
    Can you scan from the HP Software on the computer?
    What operating system are you using?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    How to Find the Windows Edition and Version on Your Computer.
    How is the printer connected? (USB/Ethernet/Wireless)
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    Please provide in detail the results if you are still having issues.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How to use Image Rotator with Firefox??

    Since the latest update of Firefox , my image Rotator will not show my images in my forum. They work fine if I use IE but I much prefer to use Firefox as my browser.
    IPlease help, I don't want to use IE.
    Thanks in advance.

    Make use of Firefox Addons
    *https://addons.mozilla.org/en-us/firefox/addon/rotate-image/

  • Using MacBook Pro with HP Officejet 4500 printer .. won't duplex print

    I've tried everything to get the answer to this one... I have a new MacBook Pro but when I try to duplex print on the Officejet (which previously did two sided printing automatically if I wanted it) I don't have the option of printing two sided automatically.  It's been suggested that I go through a bunch of steps, basically doing odd pages then going back and doing even numbered page, totally manually.  I haven't had any luck contacting HP either.  Can anyone shed any light onto this? 

    Hi,
    Pleae download and run HP Print and Scan Doctor utility which should resolve most of printing issues.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-106151-2&cc=us&dlc=en&lc=en...=
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Cannot use image capture

    Until today, I was able t use Image Capure fro scanning( clumcy , but worked), Now I cannot use image capture at all. Any ideas
    Turned scanner off and restarted. Image Capture working again.

    Hi ,
    I understand yu would like to know why the image capture stopped working.
    Probably there could have been an connectivity issue .
    Connection is re established after restarting the printer.
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions,
    by marking my answer with "Accept as Solution" if it solves
    I work for HP but my posts and replies are my own.
    Click the Kudos star as a way to say "thank you" for helpful posts.
    Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else .....

  • How do i get mavericks image capture to see a networked scanner?

    we have a networked scanner, an imac & a mac mini. prior to upgrading the imac to mavericks from snow leopard [mini is still on snow leopard], neither had any issues using image capture with the scanner. since upgrading the imac to maverics, when i start up image capture, it does not see the scanner as a shared device, even though it is seen in the system pref/printer-scanner app. i have to reboot the imac to get the image capture to see the scanner. i am in the middle of scanning hundreds, if not a thousand, of old photos & this is a PITA.

    Assuming the iTunes and AppleTV are set for Home Sharing, navigate to the iTunes library listing under Computers on AppleTV - there should be a new Rentals row along with Music, TV Shows etc.
    The movie must download fully to iTunes before becoming available.  Also check it's still in iTunes and hasn't expired due to playing it inadvertently too soon.
    AC

  • New iMac won't let me use Image Zone

    I have an iMac running OS X 10.9.4.
    I've always used HP Image Zone with my old but still-going-strong Photosmart 3210 printer/scanner, particularly to edit my photos.
    Although the Mac is quite happy to talk to the printer, and print and scan, it will not install Image Zone because it says "Power PC applications are no longer supported".
    Is there a fix for this? A new App or plug-in maybe?
    The available downloads I've tried don't do the trick, and I really can't get on with iPhoto.
    This question was solved.
    View Solution.

    Hi higgi-san, welcome to the forums!
    I noticed your post about not being able to use Image Zone with your OS X 10.9.4. After checking into this for you, there is no full software available on Mavericks for the Photosmart 3210.
    HP Photosmart 3210 All-in-One Printer Drivers
    Although it's not the best news, I hope it helps confirm your question.
    Have a wonderful weekend
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Stop motion animation help using images from a digital camera...how tricky is this?

    I'm teaching a media arts course for the first time, and I'm trying to figure out how to use images taken with a digital camera, import them to Premiere Elements 7, and put them in the timeline without having to shorten the length of them.  As soon as I drag an image from the project bin onto the timeline, it automatically plays for 5 seconds, and I have to try to shorten it to one frame length.  If that's what it takes, this process is going to take a lot of time, because the students are going to be taking several hundred photos.  If I edit them in the preview, it's still just as difficult.  Is there any way to change the settings before I import the images so that they automatically are one or two frames in length on my timeline?  Your help would be GREATLY appreciated. 

    Welcome to the forum.
    As Steve points out, setting the Edit>Preferences>Still Duration BEFORE Importing, will get what you want.
    When doing Stop-Motion, I find that a Duration = 3 to 5 Frames, works best, but that will depend on the images, how far apart, they were shot, and the exact effect that I want. It might take a little experimenting, to get things correct to both your eye, and to the images from the camera.
    Also, Scaling the Still Images, prior to Import is a very, very good idea, and especially so, with Stop-Motion, as you will have lots of them.
    Good luck,
    Hunt
    PS - if you are using Transitions, between the Still Images, you will want to alter the Duration of those too, prior to applying them.

  • I have upgraded to Mountain Lion and have found that some of my software no longer works, notably Image Browser and also the Epson Scanner Perfection 3490 software. Is there a 'patch' or way to allow me to use these programmes especially the scanner.

    I have upgraded to Mountain Lion and have found that some of my software no longer works, notably Image Browser and also the Epson Scanner Perfection 3490 software. Is there a 'patch' or way to allow me to use these programmes especially the scanner.

    Apple discontinued support for PowerPC apps with Lion, I think, so you're out of luck there. No patch coming, unfortunately. Best to upgrade whatever old applications you have or, since it seems like you're using some relatively old software, scout around for replacements that give you the functionality you need.
    Go to Apple menu > System Preferences > Print & Scan and select your scanner from the list--if it's not there you'll need to add it (start with the little plus icon). Once you have it in the list you can click on the Open Scanner button and a pretty barebones scanner driver will load for you. But Image Capture (as mentioned previously), found in your Applications folder, will probably do the job as adequately, or better, than your old scanner software.

  • How do scan strip negatives via my Epson 4990 scanner using Image Capture since upgrade to OS X Mavericks

    Hello Everyone. OK I upgraded to OS X Mavericks without thinking that by doing this would stop me using my Epson 4990 scanner as no driver / software currently available - OK my fault. Anyway as Epson have not yet provided an update (yet?), all advice being recieved is use "Image Capture" for the time being. I have tried this along with using the "Help" files but unfortunately dont seem to be be any assistance. In simples terms I just wish to scan film negative strips (and transparencies) but it dont seem to be possible. Could any member advised how to get solve this problem as I am in the middle of a major scanning exercise with the worst case senario that I wil have to revert to my Windows based laptop to carry on and temporary reduntant my iMac which defeats the point of the exercise. Thank you in advance (hopefully) 

    Replay I received from Epson today:-
    "In response to your email, we unfortunately do not have any update available for your model at present. We have no confirmed date for this but as far as we are aware this is likely to be in the next two weeks"

Maybe you are looking for

  • File naming with sequence

    My editor requires that I name a file as in the following example: FI_RX_London(sequence number) if I try this while importing using file name with sequence, there will be a - sign in front of the number. My question, how do I remove the - sign

  • Signed applet, jmf.jar provided, but no connection

    hi there! i'm posting this again in order for you to earn duke-bucks. i have a similar problem. i wrote an applet that connects to a video-streamserver an requests a live-stream. the applet sends some udp-packets to the server, which retreives the cl

  • Itu2019s showing confirmed qty more that order qty in sales order

    Dear Guru's I am working on production server issue; the issue is delivery has been created more that sales order qty.  When I am seeing sales Oder schedule lines itu2019s showing confirmed qty more that order qty in sales order what could be the rea

  • Error in field symbol

    Hi all, i'm converting a field symbol table to internat table, where field symbol table structure is defined at runtime. for that i'm using call method cl_alv_table_create=>create_dynamic_table                exporting                   it_fieldcatal

  • Stacked Views

    I have a stacked view which is smaller than the view it overlays and I'm wondering if there is a way to gray out or disable the underlying canvas when I show my stacked canvas? Any help would be appreciated.