USSD issues!!
Hi
I have a nokia Lumia 710. I just upgraded to WP7.8.
There are currently a few issues/limitations with windows phone. First was bluetooth sharing, which was solved in the 7.8 update. Second issue is with USSD. It's really hard for prepaid users to keep track of thier account balance due to this.
Currently nokia is the only OEM who has managed to over come the bluetooth sharing issue. I still don't know why it wasn't added by microsoft as a part of their OS.
And currently I'm having a lot of problem with USSD. I can't check my balance, I can't check the internet data left, it's really annoying.
I hope in the future we get an update which could make the dialer support USSD. Or maybe a third party app like Nokia's Bluetooth Share, which would show us a USSD menu.
Thank you
Finally I found the answer here for my question which nobody answered in the thread about WP7.8. It's disappointing that USSD hasn't been implemented even after so many requests and so many updates.
The suggestion about changing the SIM to another phone is not a solution. I am using Lumia 800 which uses micro-SIM, changing it to my other phone (which uses the normal SIM size) would require an adaptor and I can't be carrying it with me all the time. Besides, I am also using the rubber cover which came with the phone (it fits very well on the phone which makes the process of removing the SIM card more difficult).
USSD is not just used to check a prepaid phone account balance, but it is also used for those one-time-password generated by my bank for online transaction. It's really hard to accept that such basic feature can be left out and I have not seen any effort in bringing it into the current WP7.x phones. Whenever someone asks about USSD support in WP7.x, those who are involved in the development of it just ignored the question.
Similar Messages
-
Using duel sim Ussd code running sometimes shows no result for account and packet data until restart nokia x2ds software ver 2.1.0.11 please fix bug as soon as possible.thanks
i also have this issue ... please help
-
How to stop the Sending USSD message on my iPad since upgrading. The eKit SIMM worked fine on my older iPad. Thanks
Wiping my phone, restoring from backup, AND wiping all iTunes related files (from a search in Library and in Music) seems to have stopped this behavior.
(I couldn't wipe the iTunes files on the machine with my media and apps, but I did so on the other machine--where I only sync contacts, calendars and bookmarks. My iTunes library is empty there anyway.)
I don't know if this relates to an "app synching" issue that iTunes 9.0.1 fixed. Could be. -
Hii i m frm BGD. I m using iphone 5. My carrier BGD ROBI AXIATA. When it was ios 6 it works better . But i recently upgrade to ios 7 and i facing the little problem. One of the ussd call. Plz help or suggest ir doing better about itz as soon as possible.
I'm not trying to minimize your issues, but I have an iPhone 5S and find that I have not had these types of problems on AT&T. I'm wonding if something has gotten stuck in a loop that is continually trying to use data. If you make a good backup of your phone, try restoring it as new, and do not add anything to the phone right away. Let the device run like this for a little while and see what kind of usage you have. You report you phone is showing usage of 21GB. Did you rese this setting on the phone to begin at your billing period? The reason I ask this is some people believe this setting resets on its own with your billing period, it does not. This has to be manually reset by the user, so it might not be that accurate depending on the last time that you reset it.
If the phone seems to not use so much extra data during the period the device does not have extra apps on it, then try restoring from your backup and see what happens. If this increases your data usage quite fast again, then there is probably something corrupt in the backup that is causing this issue. -
5500 specific question on USSD handling upgrade
There is an update for my 5500 available but... I use a prepaid sim card in it so I'm plagued with the dreaded ussd pop up.
Up until the other day the phone would start to ignore the balance messages after a little while which was great. Well the phone has some issues with the music player going and if a text message comes in and you go to read it the phone locks up after a few messsages...
So I have to restart it and the messages usually stop bugging me. Well this last restart... It still shows the message after a few days.
So what does this improved ussd message handling really mean? Does it mean that every one will show no matter what or does it mean that they won't show up at all.
Unfortunatly I haven't found any information on how to permanantly block these messages or get the phone to ignore them. There has to be an add on app to do that cause allot of people have to deal with the annoyance of balance messages.
Any ideas or thoughts on the matter. I have put off upgrading the firmware because I was worried that the messages would show all the time after the uprade.
FYI I am in the US and the 5500 was never marketed here.Well, it looks to me like you've fallen into the "make the time dimension dense" mistake (which Oracle often helps to propagate - a lot of their documentation says to make the time dimension dense).
Looking at your numbers, I see the following. First off, for every combination of I, R, and S you'll be creating 131 buckets of data (because you have 131 weeks, and you've made the time dimension dense). You say that there are about 11 million IR combos, so I'll take a guess that the number of IRS combos (which defines how many tuples your composite has) is somewhere around 30 million (this is a complete guess - can you tell us exactly how many IRS combos are in your fact table)?
Based on reserving 30 million IRS tuples * 131 dense weeks, your cube is going to size out to be 4 BILLION CELLS LARGE.
Another way to look at this - assume my guess of 30 million IRS tuples is correct. Based on the fact you have about 100 million rows in your fact table, that means that each IRS tuple, on average, only has data for 3 weeks. However, you're reserving space for 131 weeks by making time dense. This not only kills performance from a size standpoint, but ties up the aggregation engine doing (literally) billions of calculations on empty cells.
I'd try again with compressed composites, but put ALL 4 dimensions in the composite. This should make your final cube size roughly 44 times smaller, and make the solve finish roughly 44 times faster (131 / 3).
Hope this helps!
Scott -
Hi, guys!
I recently bought N80 (with last firmware) and faced a strange problem.
To check my account balance I send USSD-request (you know like "*#110*10#" or smth), but on this phone after sending a request nothing is shown. Simply standby desktop and thats all. Reqeuest sends, I see this stripe line like progress bar, and nothing happens. No new messages, no info on the screen. I even tried to send rerquest using "Service Mesages" in Messages Menu, but still the same. On any other phone (7610, 7370, V3x...) works good, so its not an operator's problem.
Whats wrong?
Thanks for any help!
Nokia 3210, Nokia 7110, Nokia 8210, Siemens ME45, Nokia 7650, Nokia 7250i, Nokia 6600, Motorola E1000, Motorola V3x, Nokia N80, Nokia N95 8GbHi gennady
Short message issue is unfortunately an identified bug with this FW and will hopefully be adressed in next revision.
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
USSD dialing on lenovo with sim card enabled
I have Lenovo T540p running Windows 8 64 bit. I have installed Mobile Broadband and I am able to browse the internet with the sim card. But the problem is that there is no sevice to access and dial the sim card from the desktop. I can't check balance or load airtime from the desktop. Is there a driver that I need to download so that I can be able to do USSD comand and load airtime? I don't have to remove sim card, load airtime and replace again everytime.
hi omidboxter,
For using the SIM card (selected models), you will need to:
1. Make sure the Wide Wireless Lan Driver is installed (see device manager)
2. Make sure the SIM card is activated and you're within the network coverage area
3. Use your carrier''ss 3G/4G mobile broadband software to connect (i.e., VZAccess Manager for Verizon, Sprint SmartView for Sprint, etc.)
For removing the SIM card:
1. You need to push the SIM card in to eject it. If the SIM card is not ejecting and just keeps being pushed inside, the SIM card slot's spring maybe damged (inserting the SIM card in the wrong direction can damage the SIM card slot), If this happens, you will need to use a Tweezer to take it out.
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Well as I have already mentioned about bluetooth and wifi issues with my 3 day old bb z30 sta 5. I feel my cell phone is totally avoiding any kind of data signals. For example when I start or reset the phone my phone's 3g works for 2 mins and after that its totally gone. What could be the problem.? . I have never ever seen these kind of issues with any of my past phones. Also when I run ussd code like *111# it simply doesnt do anything. When I check phone storage the small circle keeps on rotating and nothing happens but when I check media card storage it shows at once. Please help me , what could be the problem.? Also can the wifi be repaired.? I have heard that Wifi module is inside the processor itself .? Please help me
Try completely deleting that saved WiFi profile from the Z30, rebooting the Z30, and then re-entering that WiFi profile.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Really annoying change in OS - USSD Codes - Keyboard Change
Okay...so here's the thing:
I had installed a leaked OS for my Z10 - 10.2.0.1761 and I was really happy with that. I use USSD codes quite often as cellphone banking uses these. It would be great because it would load up the numeric keypad for the USSD codes...this was quick and great!
I would get a keypad like the one below:
Now, when I installed the Official 10.2 - 10.2.0.424 (OS version 10.2.0.1791) - I get this **bleep**:
PLEASE have this fixed! It is the most annoying thing in the world to have to work around...I don't see why feature would be removed in an update!
PS: I notice that I still have this issue on the leaked 10.2.1.1055 OS.
This is enough reason to turn people away from the phone! FIX IT!Hi Fonia,
Your notebook came bundled with OEM licenced copies of the OS and Utilities (such as Norton 2005). The OEM licence means that the products are only available in the language of the country where they were purchased.
If you want the English Language versions then you will have to purchase the fully licenced versions directly from the suppliers, (or possibly download them from the relevant web sites).
The English language version of the Toshiba utilities can be downloaded from the Toshiba UK web-site.
HTH -
hi all,
USSD problem I cant use my iphone 4S with interactive USSD i only that ones has a one result one massage
ex. *111# it,s for the balance check in my operator it working normally
but *140# for all the services list should appear and i should chose next menu by using one number from the list , this one doesn't work
any body can help
thanksThis is a core OS issue outside of the direct 'fixing' possibilities for Nokia. Talk to Microsoft.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem.. -
New DVR Issues (First Run, Channel Switching, etc.)
I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half. -
Pension issue Mid Month Leaving
Dear All,
As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010 0.00 6,500.00.
Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
Please suggest.
AshwaniDear Jayanti,
We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
RT table for year 2010. DOL 26.04.2010
/111 EPF Basis 01/2010 0.00 8,750.00
/139 VPF Basis 01/2010 0.00 8,750.00
/3F1 Ee PF contribution 01/2010 0.00 1,050.00
/3F3 Er PF contribution 01/2010 0.00 509.00
/3F5 Ee Mon PF contribution 01/2010 0.00 1,050.00
/3F6 Ee Ann PF contribution 01/2010 0.00 12,600.00
/3F9 PF adm chrgs * 1,00,00 01/2010 0.00 96.25
/3FA PF basis for Ee contri 01/2010 0.00 8,750.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3F4 Er Pension contributio 01/2010 0.00 541.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3R3 Metro HRA Basis Amount 01/2010 0.00 8,750.00
1BAS Basic Salary 01/2010 0.00 8,750.00
RT table for year 2009. DOL 27.10.2009
/111 EPF Basis 07/2009 0.00 9,016.13
/139 VPF Basis 07/2009 0.00 9,016.13
/3F1 Ee PF contribution 07/2009 0.00 1,082.00
/3F3 Er PF contribution 07/2009 0.00 628.00
/3F5 Ee Mon PF contribution 07/2009 0.00 1,082.00
/3F6 Ee Ann PF contribution 07/2009 0.00 8,822.00
/3F9 PF adm chrgs * 1,00,00 07/2009 0.00 99.18
/3FA PF basis for Ee contri 07/2009 0.00 9,016.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FC Pension Basis for Er c 07/2009 0.00 5,452.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3R4 Non-metro HRA Basis Am 07/2009 0.00 9,016.13
1BAS Basic Salary 07/2009 0.00 9,016.13
Now please suggest what to do. where is the problem ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
With Regards
Ashwani -
Open PO Analysis - BW report issue
Hello Friends
I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
(Delivery completed).
We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
following:
DOC_NUM DOC_ITEM DOCTYPE COMP_DEL
650000001 10 UB X
650000001 20 UB X
650000001 30 UB
650000001 40 UB
When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
system.
Any help is appreciated in this regard.
Thanks and Regards
sampathHi Priya and Reddy
Thanks for your response.
Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
Record No. Doc.No. Item Processkey Rocancel Elikz
41 6500000001 30 11 X ---
42 6500000001 30 11 --- X
43 6500000001 30 10 X ---
44 6500000001 30 10 --- ---
(Here --- means blank)
Thanks and Regards
sampath -
HP LaserJet Enterprise 600 M602 driver issue
Hello,
I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
Regards,
AnatolyI am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Windows 7 displays error message when exiting +cursor issue
Two issues here. CS5 Phoshop on Wind 7 64 bit.
Physical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 12279 MB
Free memory: 9577 MB
Memory available to Photoshop: 10934 MB
Memory used by Photoshop: 80 %
Image tile size: 128K
First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
Any help will be gratefully accepted.
Dougfunction(){return A.apply(null,[this].concat($A(arguments)))}
doug87510 wrote:
The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
Well, that issue is simply a matter of hitting the Caps Lock key. When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair. That's a feature, not a bug.
Glad to hear the 11.1 drivers are out. I will download them and try them now myself.
Regarding "Adobe QT" crashing... QT brings to mind QuickTime, though that is Apple, not Adobe. Do you have Apple QuickTime installed?
Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
-Noel
Maybe you are looking for
-
Key Fields for Vendor as a Customer
Hi experts, I have to develope report for vendor payment, my senario is as follows - vendors which are also our customers, - payments done at every 15 days - I have to develope the payment summary report for this please tell me which are the key fiel
-
Can't import from DB using Admin tool
Hello I have a problem that I'd like to get some help on. I have installed OBIEE 11.1.1.7 on Linux as well as the OBIEE Client Tool on Windows. I have modified the user.cmd file so that now the file has the following content: @echo off REM This file
-
I have a PO with one line item. I have done service entry against this and also accepted. Now I blocked the PO line item. If I am going to ML84 report and execute with this PO, this service entry line is not displayed. I have selected option 'All' fo
-
PSCS4 activation 'issue' w/MAC PPC 10.4.11
Has anyone experienced this problem... Proceeded through the PSCS4 Mac upgrade procedure. On completion, was prompted to register the product, to which I responded it would be done later. I was expecting an activation procedure to follow, but the ins
-
Blocking a company code for all transactions.
A compnay code is having two plants assigned. No open documents in that company code. How to block the company code for any transactions including purchase document creation? However all the past data to be available for viewing and reference. Thanks