Varience in MB5L and GL# value due to change in profit center.

User has changed the profit center in Material Master Data and then they have carried out Material Movements.Later on they realised that the profit center they had updated is wrong, so they changed the profit center again.
Now they are finding the difference in MB5l value  and Value in respective GL account.
Could you please help me resolve this issue.
Regards
Prakash

Hi
If this SO is processed partially - i.e. transactions happened - You cant change it
You can use ABAP and change it in Debug mode, but not advisable... Better to short close the SO and open a new SO for Balance qty
br, Ajay M
Edited by: Ajay Maheshwari on May 25, 2011 5:10 PM

Similar Messages

  • I want to store the data form the PWM and the value of the changing duty cycle into a file simultaneously and continually

    i want to store the data form the PWM and the value of the changing duty cycle into a file simultaneously and continually but having problem.Please can anyone help out.
    Attachments:
    data.vi ‏60 KB

    Hello,
    Have you looked at the "Write Binary File.vi" and "Read Binary File.vi" examples?
    They give you a good clue as how to write and read arrays to and from binary files.
    For your data it means that you could put the two data items to write in an array and write the array to file, for the read its important to in what sequence the number were written to file.
    Kind regards,
    André
    Regards,
    André
    Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

  • Asset acquisition value is not updated in Profit center as well as segment

    Dear All,
    I procured an asset through MM, (MIGO and MIRO). the acquisition value is updated in the asset master as well as GL account. but no value is updated in the profit center and related segment.
    I did the following (using ECC 6, document spiltting activated)
    1. Asset master data created and cost center assigned. Profit center is assigned in the Cost center and Segment is assigned in the profit center master data.
    1. me21n - po created
    2. MIGO - done
    3. MIRO - done.
    Can any one help me to solve this issue
    Looking forward your valuable reply
    Thanks in advance
    regards
    Govan

    Hi
    Please check whether cost center is suppressed field for the respective GL Account. Also it seems that you have not made profit cneter as mandatory field. Goto IMG> Financial Accounting (New) > General Ledger Accounting (New) > Business Transactions > Document Splitting > Define Document Splitting Characteristics for General Ledger Accounting . Here you can make the mandatory field as per requirement.
    Warm Regards

  • Secondary Cost Element Values doesn't display in Profit Center Report

    Hi everyone,
    I'm having a problem with our Profit Center plan/actual/variance reports wherein it doesn't display the postings I made to the Secondary cost element when I executed an assessment cycle (KSU5). I already set in the configuration that all postings to be done in the cost centers, should have a parallel posting to the profit center assigned to it. I can see the postings in my cost center reports, but not in my profit center report. Could I have missed out on any procedure to enable the secondary cost element parallel posting in my profit centers? Any help would be appreciated. Thanks!

    it might be the configuration of the library or some parameter in the report (record type should be 0 and 2 for actual values, where 2 stands for distributed values and 1 and 3 for planned values)
    but it also might be that the reconciliation is done between different CC and same PC
    - check your CC organisation asignment
    - if sender cost center and receiver cost center have tha same PC it is probably the reason
    - I had that problem my self and didn't solve it
    cheers
    matej

  • Profit Center wise balance sheet and Profit and Loss account

    Hi Experts,
    I will explain my scenario
    The is cleint having Head Office for handling procurement of goods for all branches(8) and the physical delivery happens for goods at the requested branch and GR and IR also makin at the branch level.
    And we are treated each branch as profit center apart from HO(profit center).But the vendor payment should be happen from HO(prfoit center) so and they are not using automatic payment programme.
    My question is
    1.While doing the vendor (Branch)payment from Cash/Bank GL (HO) how the balances will be tallied ?
    2.If I am using the document splitting and zero balance document clearing will it tally at the profit center level ?
    3.At the period end if I will do the 1KEK T Code to transfer the payables to the profit center which profit center system will take for posting ?
    Please advice me in this and I will give good points with correct answer.

    Hi Edukondalu Garu,
    Please find answers to your questions below:
    1.While doing the vendor (Branch)payment from Cash/Bank GL (HO) how the balances will be tallied ?
    Answer: The Profit Center balances will get automatically tallied due to document splitting and Zero balance account being defined properly.  The automatically identifies it
    2.If I am using the document splitting and zero balance document clearing will it tally at the profit center level ? 
    Answer: Yes that is the main criteria to get full fledged Balance sheet and P&L account by Profit Center
    3.At the period end if I will do the 1KEK T Code to transfer the payables to the profit center which profit center system will take for posting ?
    Anwer: With Document Splitting, you don't have to do the period end transaction in PC to transfer the account payables, accouts receivables and fixed assets.  The transfer is online and real time basis.
    I hope i answered all your questions.
    Please feel free to get in touch with me if you need futher clarifications
    Best Regards
    Surya

  • Profit center - actual data and plan data question -?

    Hi Gurus
    Please clear my doubts in profit cneter accounting.
    1) what is PLAN data  -? (What is planning in a bigger picture)
    why do we need plan data -?
    2)ACTAUL data will be posted in the profit center from other SAP moduldes.
    So with out PLAN data  prrofits can not be figured -?
    OR
    Plant data is for some other purpose -?
    Please can some help me on these -? Alos any examples are really good for me to understand
    Really appreciate.
    Thanks
    Kris

    Hi,
    Profit centers captures actual revenues & expenses of the business transaction.  The company arrives the
    net of income over expenses and analyses whether the Profit center is making Profit or not.  Now they
    want to control the expenses and have a target set to expand the revenue base to optimize profit.
    For this they have to plan each costs and revenues over a period for a Profit Center.  When they
    plan values for these profit centers they have to take into consideration the business trend over
    next 12 months and the plan is set for each period.  Actuals are posted in normal day to day transactions.
    During period end, the analysis is being done to see the variance between plan and actual and measures
    are taken to control the areas to reduce these variance which may affect Profit.
    Regards,
    Sadashivan

  • Cost center planned values to profit center

    Hi All,
    Can anyone help to know the customization setting where the cost center planned values are automatically moved to profit center...
    Blessy.

    Hello,
    Can you please check:
    IMG => Controlling => General Controlling => Organization => Maintain Versions
    Select your version and click on
    "Settings for Profit Center Accounting"
    See whether "Online transfer" has been check for each year.
    In 0KE5, check whether year and activity indicator has been ticked.
    Also check in GB02 whether document numbers are maintained for local documents.
    Regards,
    Ravi

  • Profit Center Value Adjustment

    Is there any way to amend or adjust the values posted in the profit centers??

    Open the Concerned Journal Entry and you can change the 'Profit Center' in the Journal Entry

  • Replacing Profit Center value while sales order creation process - VA01

    Hi,
    Profit Center replacement   in Tcode VA01 and VA02
    I want to replace the profit center value (COBL- PRCTR) in Account assignment TAB in sales order creation time VA01 and VA02 by using custom logic (Line item Material Group and Sales District VBKD-BZIRK).
    Can anyone tell me what exit or BADI I can use for this ( I tried some of them and not working properly).
    1.     In Exit I need to have the value of Sales District VBKD-BZIRK and Line item u2013 Material Value  - These 2 field values I need in the exit.
    Thanks in advance.
    Rajesh.

    What do you mean this is not correct user exit. That is an include and there are user exits within that include.
    Have you tried save document prepare?  If yes, what have you done?
    Don't just blindly say 'that is not correct' or don't expect someone code for you. You better try in different way and learn how to do it. I just got it worked in my system just in 5 minutes in debug.
    You are not going to change COBL-PRCTR but you should change XVBAP-PRCTR.
    put a break point in userexit_save_document_prepare in include MV45AFZZ
    Loop through XVBAP and change PRCTR as per your logic.... This changed PRCTR carried till end (billing document/accounting document). I can see the profit center document with changed profit center.
    Good luck... if that solves. Mark this thread appropriately.
    Most importantly, you better close your previous threads if they are answered. if you solved by yourself post the solution so that others can benefit from that. 
    @moderator, please check this guy posts
    Edited by: Sampath Kumar on Apr 28, 2011 1:16 PM

  • Different profit center in Project definiton and  WBS

    Hi,
    Our client facing a problem for closing the project due to  different profit center. In Project definition  the assigned on profit center and WBS they assigned another different profit center . There is not data posted or planed .
    SAP won't allow me to change the Profit Center because it says the project is released.
    Now they try to  close the project but it showing error like different profit center in project definition and  wbs.
    Could you please anybody help to solve this issue?
    Thanks.
    V.K

    From the error message It seems there is a validation using Field exit. Ask your abaper to debug. Then would be able to know the logic behind it.
    Venkat

  • Incorrect flow type and profit center missing in FAGLL03 and FBL3N

    After finished a transaction CJ88 ,when we use the transaction FAGLL03 for an associated GL account, profit center goes blank in the screen. In CJ20n also the correct profit center associated with the WB element is shown but it's missing in fbl3n and fagll03. Could you please provide help?

    Hi JPA,
    All the details that you are asking about is attached in the screen-shots provided 'inheritance_document splitting'. I am also providing you screen shots regarding the problem for a better ease of analysis. Here 'cj20n_example' shows the profit center associated during project buildup and the screen shot 'FAGLL03_example' shows the issue due to which the profit center field for the same WBS element is shown blank.
    Regards,
    Somak Biswas.
    inheritance_document splitting:
    cj20n_example:
    FAGLL03_example:

  • Profit Center population in the Vendor and Customer Line items

    hello
    our client is asking for  getting profit center in the vendor and customer line items  where in the view FBL5n and fbl1n we are not getting the profit center populated - in the new gl i understand that there is a standard report based on the gl account.
    but our business is not satisfied with the report and expecting report at profit center level.
    Can any one suggest any way of doing this.
    regards,
    Vijay

    Dear Vijay,
    Let me provide you my view of solutioning for this. This is an enahcement that needs to be done
    1. You can get the profit center from the given vendor and customer line item at the time of posting, using an enahcement you will be able to capture it.
    2. Existing the profit center field is not populated in the BSIK,BSAK,BSID and BSAD tables
    3. Hence, in the same enhancement once you capture the profit center , you can write the code that profit center is updated in these tables also.
    4. This will help you to do the vendor line item wise selection in the FBL1N,  FBL5N profit center wise.
    Constraints of this solution:
    The only constraint remains where in the for a given document if there are multiple profit center, then the system will do the splitting profit center wise for a vendor line item, which will not populate the profit center in those tables as there is only one field available in the bsid etc.. tables.
    This basically would be the one the soltuion where in as seeen from the end user ther eis no change in the front end interface , the way they are doing always they can do.
    You need to also take care the % of document splitting means cross profit center postings /cross document splitting charactericstics postings and the volume involved in this. so that you can suggest this to your client.
    Regards,
    Bharathi.

  • Authorization object for company code and profit center together

    Hi all,
    Please help me with the following requirement..
    Company Code = ABCD
    Profit Center = *
    The user is authorized to run the report for company code ABCD only but any profit center within this company code.
    2       Company Code = *
    Profit Center = WXYZ
    The user is authorized to run the report for Profit Center WXYZ only but any company code.
    3       Company Code = *
    Profit Center = *
    The user is authorized to run the report for any company code and profit center.
    The same user could have 1 and 2. So, in this case he should be able to run a report for the total inventory of company code ABCD, and a report for total inventory of profit center WXYZ only regardless company code.
    He should not have visibility to other company codes inventory other then profit center WXYZ.
    Regards,
    Raj

    Hi ,
    Anyone please help me..
    Regards,
    Raj

  • Assign manual cost and profit center for 3rd party purchase order

    When we have a 3rd party purchase order we need to assign OUR cost and profit center to that document.  Here is the scenario:
    We buy a product from a vendor for $10 and then re-sell the product to a customer for $100.  Instead of posting this information to either cost or profit center of the vendor and customer, we need to assign the $10 to our company cost center and the $90 to our company's profit center.  We are basically acting as a middle man for selling a product.
    I am fairly a newbie, so please provide detailed answers if possible.  We create the sales order in VA01 and create the purchase order in ME22N.

    HI Kapil,
    For any accounting entry you need to define a General Ledger Account where the details (Amount) of the transaction will be stored.
    Just by maintaining cost centre will not help in completing any transaction involving accounts. So you need to  maintain G/L account in the controlling area of your company code.
    You can use T Code FS00 to create new G/L account in the chart of accounts.
    In the edit cost element Tab you can give the cost center that you want.
    I hope this helps.
    thanks
    rahul goel

  • Error with Business area and profit center

    Hello Guru's,
    I have an issue when posting the stock through t-code MB1C and 521 movement type. We have assigned business area and profit centers for plants as below:
    For Plant 1000,
    Business Area:       1100
    Profit center:           1100
    And For Plant 2000,
    Business Area:        1200
    Profit center:             1200
    But when I am assigning plant 2000, and assigning business area and profit center as 1200 respectively. System by default is picking as 1100 with a warning message.
    Please help this resolving this issue, I want the system to take the correct assigned BA and Profit center.
    Regards,
    Varun Siddharth

    Hi Varun,
    One of the possible ways is, to assign a business area to the cobination of Plant and Division in OMJ7 (Assignment is possible for other combinations as well). Later you can define a substitution rule so that, a profit center is substituted to the combination of Plant and Business Area.
    Hope it helps you.
    Regards,
    Ravi Kumar

Maybe you are looking for