Warehouse and storage loc assignment

Hi,
What is the reason for WH being uniquly assigned to storage location while a single plant can have multiple storage location.
Thanks
Prakash

Hi prakash,
ware house number assigned to plant and storage  location.  It is the assignment of standard sap.  We can maintain number storage location for a single plant and at the same time we can get material from warehouse from storage locations.  I hope this will help you to understand query.
Please reward points if you feel this solutions solve your query.
thanks & Regards
Rack123

Similar Messages

  • Diff between valuated stock and storage loc stock

    Dear guys,
                  What is difference between valuated stock and starage loc/ batch stock?
    Regards
    Jay

    Hi,
    the stock which shown at MMBE at storage location level /batch is valuated stock.In order to identify the differrance , the stock which is taken in will be with stock types likes unrestricted,quality etc.If batch management is active for the material , material willbe procured in batches and will be kept in storage location, with differrant stock types.Stock types may also be like sale order stock etc.If the material is procured against a account assignment , the value of the stock will be costed against theaccount assignment.
    The qty multiplied with the price is the value of the material and this valuated stock will be stored in the storage location under a batch if batch management is active.
    Again valuation can be at company code level or plant level.
    Also non valuated and non stock materials also in existsance which will be depend upon the material type and will be procured against a account assignment.
    Regards,

  • How to deliver goods without stock in that particular plant and storage loc

    hi,
    sap gurus,
    how to deliver goods with out stock in particular plant andstorage location.
    or
    how to configure negative stocks.
    regards,
    balajit

    Ideally not recommended.
    Still if you wish to go for it, follow the steps indicated below
    1)  Go to OMJ1 and select the box against the respective plant
    2)  Also go to TCode OMSY, Tick the box "ABp" (Allow Back Posting) for your Company Code, so that you can control postings in the closed period.
    3)  And finally, go to material master and select Plant data/ Storage2 view, tick the box "Neg. stocks in Plant".
    thanks
    G. Lakshmipathi

  • What is the use of Storage loc.ref.in LE-WM Interface to Inventory Managemt

    Hi Guys
    What is the use of below fields
    Special movement indicator for warehouse management and Storage loc. ref.
    In the WM configaration LE-WM Interface to Inventory Management
    How we can do the below scenario with this configaration
    I have 3 scenarios all scenarios have MIGO and placing stock to WM
    2 scenarios requres Immediate TO creation after MIGO 101 mvt type
    But last scenario does not want Immediate TO ,it is having another Z transaction to create TO
    But problem is for the last scenario also creating Immdiate TO after MIGI 101
    How to avoid this Immdiate TO for this scenario
    And How to allow it for first 2 scenarios
    How we can to with that configaration

    Hello ,
    It is not possible directly in customising as all three cases are using the same Mvt Type.
    Alternate Solution :
    You may try an by creating a new Mvt Type 901 i.e making a copy of 101.
    Thereafter try to link a new Ref Mvt Type to the same .You should use this case for the third scenario.
    This may resolve your problem.
    Regards
    Ramesh Ch

  • Two  Warehouse can Assigned to one Storage Loc

    Dear All,
    Is it possible having :
    "Two  Warehouse can Assigned to one Storage Loc  ?????"
    If yes how it can be achieved.
    Regards,
    Rocky
    Edited by: Csaba Szommer on Sep 8, 2011 7:46 AM

    Hi
    Yes...we can do in enterprise structure assignment.>le....
    Plant sloc warehouse...
    Kuber

  • Relation between storage loc and workcenter/resource

    Dear Gurus
    My client wants that whatever materials (fert) coming out from a particular workcenter/resource should be posted to a particular storage location.And that the system should propose the storage location while posting of goods.Can a storage location be assigned for any workcenter/resource.
    Regards
    Sandip Sarkar

    Hi,
    2 suggestions:
    1. I presume you have created different routings / group counters within the same routing each specifying the different work center from which you can assemble / manufacture the final product.
    Now create different production versions, by specifying the routing & bom details in the PV. Also in the PV, in the section Other Data, you will find a field called Receive Location, here specify the storage loc. relevant for each work center.
    Now when you create the order, read the production version which is relevant i.e. depending on the work center, then once the order is completed system will post the stock to the SLoc which you have pre-defined.
    2. Use BADi - WORKORDER_UPDATE, method - AT_SAVE or use User exits PPCO0006 or PPCO0007. Create a Z table with Work center and Sloc & this enhancement you can refer to the work center and assign the relevant SLoc, discuss with your abaper.
    Regards,
    Vivek

  • In GR, T331 entry for warehouse number GVW and storage type 916 not found

    Hi friends,
    while doing gr, it is giving following error. we are having wm
    T331 entry for warehouse number GVW and storage type 916 not found
    regards,
    william

    Hai,
    Add the entry 0f 916 storage type to ur warehouse by copying from std i.e 001 in SPRO/Log Exe/WM/Master data/Define str type.
    Regards,
    BSK

  • CO27 is showing blank values in Warehouse,Storage Type and Storage Bin

    Hi Gurus,
    I am using CO27 to generate pick-list for a production order. The pick-list is being used by Warehouse team to Goods Issue for the Production Order.
    However, the problem that I am facing is that in the pick-list generated from CO27 is showing blank values in Warehouse,Storage type and Storage bin.
    So, it is becoming difficult for the Warehouse to do the picking based on this pick-list.
    Could you please advice how the fields Warehouse,Storage Type and Storage bin can be populated in the Production Order pcik-list.
    Is these values are fetched from Material Master data or any other place?
    Thanks & Regards
    Subhasis

    Hello
    You should implement the following note:
    384427 - CO27/COIK: Storage bin is not displayed
    BR
    Caetano

  • Outbound Delivery and Storage Location

    hey everybody,
    this is our status quo:
    we create a outbound delivery based on a sales order & at the end of the creation of the delivery we are doing the goods issue immediately to do the material movement. we do that, because we need a material document for the physical packer in the storage. at the start of the physical packing he gives this material document to the person in the warehouse and this person picks the needed material.
    we need a solution for our new scenario:
    in the future we want use handling units within deliverys. in these HU's we want to pack the material included in the delivery note.
    here are the steps:
    1. outbound delivery creation
    2. we need a material movement (material document) from one storage location (A) to an other storage location (B)
    3. the packer is packing the material physical and within SAP in the new created handling units
    4. when the packing operation is finished, the packer gives information to SD person and the goods issue will be done. material movement will be done from the storage location (B).
    does anyone has an idea for us?
    another information: we don't want to do the material movement manually
    best regards & TIA
    chris

    Dear,
    As per standard SAP , once you assign the storage location in OUTBOUND DELIVERY, system will tend to pick the storage location assigned to it.
    But as per your client requirement, you need to do the transfer posting from one storage location to other storage location and then you would like to post the "Goods issue" from the new storage location.
    If it has to be done, you need to update the "Outbound delivery"  with new storage location before posting the  goods issue.
    Is there any business advantage with this new process,If  so i can suggest you one work around if you are doing transfer posting with respect to "Each out bound delivery"
    Details  as Follows:
    Step-1:
    While transferring the stock from one storage location to other storage location(Movement type:311 single step), mention the out bound delivery number in "Document header text" or "Material Slip".
    Step-2:
    Then take a report of those transfer posting documents and then update all the outbound deliveries for new storage location.To update in mass, you can set BDC with the help of ABAPER
    Step:3
    Then do "Post goods issue".
    Regards,
    pardhu

  • Automatic Inspection Lot Creation for HUs (storage Loc.) in WHS

    Hi All,
    can someone guide me through customizing/with end result expected from client. How can I setup this configuration.
    The requirement is all Chem.Raw Materilas are subject to Quality inspection with HU managed storage Loc. with WMS.
    Good Receipt is posted Via Vl31n into Quality Stock. Subsequently a Transfer Order will be created & confirmed to transfer of materials from 902 interim storage type to destination storage type and bin. (due to lack of space in the Whse).
    Now expected is that when Usage decision made (Quality Managment) the stock type should change from Q to Unresticted within the same bin and same storage type and material should be made available to issue for orders.
    Also when GR is done 101 mvt. an inspection lot should generate automatically in Whse under the quant.
    Most appreciate your help.
    Regards
    Chandra

    Hi Chandra,
    Generally WM movement type '309' is assigned for posting change (Sap standard setting). This movement type is generally assigned against 321 IM movement type.
    Modify the settings for WM movement type '309' as below:
    Path: LE -> WM -> Activities -> Transfers -> Define Movement types
    - Automatic TO X (activate)
    - Activate 'To item can be confirmed immediately'
    - Activate 'propose confirmation'
    - Activate 'post to same bin'
    This should solve your problem.
    On your other question
    Generally the inspection lot is assosiated with the WM
    stock and Quant if the stock Quality stock is posted to bins directly.
    Please display the Quant using LS23 and let me know your findings.
    Regards
    Madhu

  • How to get automatic plant and shipping point and storage location

    hi,
    sap gurus,
    how to get automatic plant and shipping point and storage location automatically into the sales order
    i have done all the config settings for that
    but its not appearing automatically.
    regards,
    balaji.t

    Hi
    Balaji...
    U can get the plant in sales order,  by doing the default the same in customer master or in  material master. In customer master -- sales are data--shipping tab delivering plant there u can assign and get the same in order for that customer. it is better to do in customer master rather than in material master.
    Shipping point is getting determine in sales order and u can not make it default like plant. Shipping point is determine in the basis of Shipping condition of customer ( ship to party)+ loading group of material + Deliverying plant there u have to assing the shipping point and it will flow in the sales order. Tcode OVL2
    For S loc u have to enter manually in the sales order u can not get it automatically.
    Hope this will help you.
    Thx.

  • Storage unit types and storage bin types  - Need

    Hi,
    i want to know what is the use of the storage unit type and storage bin type.
    thanks,
    Maxx

    Dear Maxx,
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f844694afa11d182b90000e829fbfe/frameset.htm
    Storage Bin:
    A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
    Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
    You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
    You can also define the following additional characteristics of a storage bin:
    Maximum weight
    Total capacity
    Fire containment section
    Storage bin type (for example, for small or large pallets)
    With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
    Storage Unit:
    In the system, a storage unit record consists of a header and at least one material data record (quant data record).
    The header contains information which is relevant for the entire storage unit and includes the:
    Storage unit number
    Storage unit type (SUT) of the storage unit
    Storage bin in which the storage unit is currently located
    Status, which provides current information about the storage unit
    Specific information about the stock contained in a storage unit is found in the material data record. The material record is already familiar to you in the existing system as a quant data record. For SU management, this information can be managed at the storage unit level.
    The following graphics illustrate how WM handles storage bins with and without the use of storage unit management. For these examples, storage bins are displayed in which 200 boxes of red pencils and 50 boxes of blue pencils are stored. The stock is distributed on two pallets.
    Hope this will help.
    Regards,
    Naveen.

  • WM- WM stock (quality) to not activated storage loc-Transfer Posting issue

    hi friends
    I Have a error during transfer posting (321 mov type). After quality inspection the stock is rejected . so i have to move to WM not
    activated Storage location. After transfer posting, TR  is generated From material document. then iam trying to create to transfer order , but i have the error
    System cannot find source storage bin
    Message no. L3 008
    Diagnosis
    The system was not able to determine a source storage bin for this material.
    This problem can be caused for several reasons:
    1. The material no longer exists in your warehouse.
    2. The material is in your warehouse, but currently cannot be reached by the system (for example, the material is just being transferred by one of the conveyor machines).
    3. The material is in your warehouse, but not in the storage type and storage areas that are defined in your system for the material search.
    Procedure
    Check to see if the material really exists in your warehouse.
    If the reason for the error is the third one mentioned above, contact your system administrator
    Our bussiness is
    lXRM storage location is WM activated
    lXA   storage location is not WM activated
    1. create PO
    2.GRN- Quality Inspection
    3 If ok Means Stock is move to lXRM
        If not ok Means Stock is move to lXA.
    my queries is i want to move quality stock (WM) to not activated storage location.
    with regards
    dinesh

    hi friends
                     thanks for response,
    1. create PO
    2.GRN- Quality Inspection,* Initially i GRN receipt LXRA Storage location
    3 If ok Means Good Stock is move to lXRM. (storage location)
    If not ok Means Bad Stock is move to lXA.(storage location)
    we have not quality module, once do the Migo the manually the assign quality inspection(STOCK TYPE).  After quality inspection
    done, Then do the 321 mov type user should decide some good quantity move to unrestricted stock LXRM (Storage
    location) ,some bad quantity move to the scrap storage location (lXA) .
    *STORAGE LOCATION LXA is not activated WM
    My request is, i want to move to the Scrap location (LXA). after 321 movement type done, TR is generated then i am trying to do the transfer order . system is not accepted , iam getting error
    wiht regards
    dinesh
    Edited by: code acess on Aug 27, 2011 4:45 AM
    Edited by: code acess on Aug 27, 2011 4:46 AM

  • Define Control Storage Loc error LT206

    Hi guru´s
    I went to config 'Table for storage location control' and tried entering a storage location but I'm getting an error message: LT206: Based on SType control, stor loc XXX is unsuitable for stor loc control.
    path
    Logistic Execution> Warehouse Management > Data Master> Define Control Storage Loc
    What config is necessary for this case? Appreciate any help on this matter. I don´t understand why a can´t for this combination the error message appear.
    that the type of storage is storage block has something to do?
    Thank you in advance.
    regards
    Vasco

    Hello Vasco,
    you would use Stor. Location Control when you want to direct materials to different Storage location base on the movement types within a same Plant or warehouse. Check if you have maintained the right combination of the movement type and Sloc .
    thanks,
    Edited by: Ganesh Prabhakar C on Dec 14, 2010 1:04 PM

  • Shipping point storage loc determination

    If same material master record is sold as finished good and sample material and if there are 2 shipping points and 2 storage locations for this material, (Sample storage loc and shipping point and finished good storage loc and shipping point. ) and we are creating different types of sales orders with different type of item categories. What would be the solution to detemrine the correct shipping point and storage location for this material ?

    If you have separate Plant also then as per the Plant ,maintain Loading Group in Material Master in Sales : General / Plant.Now in OVL2 ,assign the combination of Shipping Conditions , Plant & Loading Group with Shipping point for both Finished & Sample Material.
    In such case , while creating the Sales Order , system will pick the Shipping Point as per the combination maintained by you.
    Best Regards,
    Ankur

Maybe you are looking for