WebDav Repository Manager Disappears???
Hello,
I am seeing some strange behavior with an IIS WebDAV based KM WebDAV repository manager I created. I used the following as a basis for my setup.
http://help.sap.com/saphelp_nw04/helpdata/en/4a/217fb6c33c6748a1715a161ac942cd/frameset.htm
I created the memory cache, CM HTTP System, a portal system aliased with the same ID as the CM system, and finally the WebDAV Repository manager. If further setting detail is needed I can send that. The repository worked on Friday. It is not there today. This has happened twice. When I drill down into Content Administration > KM Content>root > runtime > Repository Managers... > IISWD > servers I am presented with "hostname". When I select Details>Properties>Miscellaneous tab I see failures.
Example:
last-failure-1: 2007-07-16T20:12:14Z: PROPFIND /ExternalPortal: com.sapportals.wcm.WcmException: sending request to: http://hostname/ request uri: /ExternalPortal unable to connect to hostname: unknown host: hostname (java.net.UnknownHostException: hostname)
All of the required KM objects mentioned before are still present and configured as they were a few days ago. Is my repository loosing it's reference to the CM HTTP System.? Has anyone seen this before?
Thanks,
Doug
Hi Doug
I believe the problem is that your HTTP System in the portal cannot see the share you are trying to integrate into the potal. Is it a webdav-share set up using an IIS?
I have tried to implement the WebDAV/SSO solution where we got the same error for no reason. But after installing some different hotfixes (http://support.microsoft.com/default.aspx?scid=kb;en-us;893246, eg) and changing server to a standalone IIS, the error didn't occur any more.
Hope that can give you some ideas.
Kind regards,
Martin
Similar Messages
-
SOAP/Web service based repository manager
Hi,
We would like to implement a repository manager using SOAP/Web service messages to connect to the document store. The solution will have to support most opperations as the WebDAV repository manager supports. TREX has to be able to crawl for indexing/classification, but I guess that is not a problem.
Is the some information out there on creating repository managers like this, and how they tie in with ACL managers, cahces etc?
Message was edited by: Bjorn BjornstadNot relevant any more
-
KM links not functioning through Webdav repository view
Hi All,
I have a somewhat complicated setup here which is causing some strange issues.
We have an EP instance and a BI portal instance setup. Currently we broadcast reports to our BI portal KM instance, and use ICE to replicate the data from BI portal KM to EP KM. This is not the desired end result.
According to SAP, the end result should consist of using a Webdav repository solution. When users hit the EP KM, specifically the content that is being replicated over currently, they would hit a Webdav repository which points to the BI portal KM, which has an identical KM folder structure. So far this works fine. The problem happens when we create links within the BI portal KM.
Near the root of the KM structure, we have the main content. We link back to this main content with different permissions on each link. This is done for business reasons.
When I try to access this linked content from the BI portal KM it works fine. From the EP KM it throws a HTTP 403 not authorized error. I have tried opening up the permissions to everyone on both KM's with no success. When I access the content directly (ie not linked) it works fine (same permissions). Any ideas why the linked content through a webdav repository would throw HTTP 403 errors?
Kind Regards,
Richard
Edit: I should add that we are currently using EP 7.0 EHP1 SP3 highest current patch level and BI 7.0 EHP1 SP3 highest current patch level.
Edited by: Richard de Gonzague on May 5, 2009 4:33 PMHi,
I have a similar requirement where in we need to integrate CRM Content Management with SAP KM.Can you please let me know -
1. How do I connect it using the Web Dav repository manager. Can you point me to the document.
2. If you were to resolve the error that is mentioned below. I will have a similar requirement once the WebDav repository manager is configured.
Thanks,
Vivek -
How to control permissions in KM using File System Repository Manager
Hello everybody
I have a scenario with 15+ file servers which content needs to be mapped into Portal KM as read-only.
Windows Authentication is configured on the portal, so the users don't need to supply the portal with username/password.
Now the users are of course only allowed to see the same content in the portal as they can see on the file servers. I know that the permission mapping can be done using a File System Repository Manager with W2KSecurityManager, but in that case the users will have to maintain the mapping of rights from windows to portal manually. And with ever-changing passwords this is too big an administrative task. So I am looking for another solution.
My question is therefore:
How can you configure the File System Repository Manager in a way where it the user does not need to maintain "user mapping" manually, but only need to logon to the portal (through windows authentication) and can see the same files from the portal as he/she can see from the file servers.
Can this information in some way be taken from the configured Windows Authentication? Or is the only solution to enable WebDav on the file servers and and follow the "Integration of Windows File Servers into the SAP KM platform Using SSO and the WebDAV Repository Manager"-guide?
Any help will be rewarded.
Best regards,
Martin SøgaardHi again Dirk
I just studied the "Integration of Windows File Servers into the SAP KM platform using SSO and the WebDAV repository manager"-guide in depth and I don't quite understand what rights the cmadmin_service and notificator_service are supposed to be given in the Active Directory. In the guide it says:
"A number of global services and repository services need to perform operations on resources in various repositories. For example, the index management service must read all resources it is meant to index. When an index is created, the service user index_service is used. Therefore, this user has to have at least read access to all repositories that are to be indexed. Other users that are used by the SAP KM platform are the service users notificator_service and cmadmin_service. When a search is taking place, it is the user that is currently logged on to the portal."
I dont quite understand what the two service users are doing but more importantly, I need to give the two service users the correct permissions in the Active Directory (or through user mapping). I understand that index_service only needs read_only permissions, but what permissions should the cmadmin_service and notificator_service be given?
Best regards,
Martin -
WebDAV repository and incremental update
Hi guys
Does any of you know what is needed in order to make incremental update work when you have configured a WebDAV repository manager?
Is it only neccessary to check "Send events" or do you also have to activate some services like "properties"?
Any help will be rewarded.
Kind regards,
MartinHi Julian
Thank you for your answer.
It is a win2000 server, so I guess that should not be the problem? But since the data communication is going through the IIS, it might be a setting that needs to be set there?
Kind regards,
Martin -
Access WebDav repository by java...please URGENT
Samebody can help me about the access to the webdav Repository of xmldb oracle by java?
please help me!Gentlemen,
Thanks for the replies.
I'm glad to hear that normally I shouldn't do anything special when accessing a WebDAV-repository.
I'm currently building a 'debug-environment' so I get more specific error-information.
I will come back..
Maarten
Message was edited by: Maarten
I have found the error:
one of the parameters we used in the coding was 'LOCATION'. We filled this parameter with '/webdav' since we saw that folder in the root when looking in Km content
BUT as the prefix in the WebDAV repository manager we filled '/tst'
that was the reason for a InvalidUriExeception
once we changed our parameter to '/tst' everything works fine!
Kind regards,
Maarten
Maarten Rutten -
Hi,
I been configured WebDAV repository by connecting to content server which is installed on UNIX o.s.
these are the below stpes i followed
1.created a New System from template by choosing u201CKM WebDAV Systemu201D
2.done user mapping and assigned an alias to the system.
3.In the Content Management, by selecting the Subarea u201CGlobal Servicesu201D and inturn select the u201CSystem Landscape Definitionsu201D created an http system
4.Now created a WebDAV Repository, for that navigated to System Administration->System Configuration->System Landscape ->Knowledge Management->Content Management
Selectd the Subarea u201CRepository Managersu201D nad created webDAV reposiroty
5.now i navigated to contnet management role, ther i didnt find my folder which is there in contetn server.
6. now i navigated to system administration->monitoring->knowledge management -> component monitory
her i found the repository folder which i create with warining symbols
these are the errors its displaying
name status
filters running
reusorce event broker runnig
servers startup failed
services runnig(but its with symbol warning)
i opend services, ther all servises are in green,running except the below service
wastebasket
RepositoryService startup failed 9/29/08 7:12:08 PM Properties
Configuration Error: Error while verifying the configuration. com.sapportals.wcm.repository.IOErrorException : sending PROPFIND to remote server
kindly let me knwo what i missed
if it is the case of window o.s, ther v will install IIS. But here in my unix o.s i didnt do anything.....
kindly put some light on this
regards
AmarHi Amar,
Can you check your parameters you have used for the WebDav repository manager configuraion?
It should be of this format:
If WebDAV server is available at http://webDAVserver:1090/projectshare.
Example of a WebDAV repository manager configuration:
Name = webdav
Description = WebDAV Repsoitory Manager
Prefix = /webdav
System ID = webdav
System Path = /projectshare
Cache Timeout = 5000
Memory Cache = ca_webdav
ACL Manager Cache = ca_rsrc_acl
Versioning Manager = [u2026].WDVersioningManager
Server Type = Native IIS WebDAV Server
Example of corresponding HTTP system:
System ID = webdav
Description = HTTP System for WebDAV
Server-URL = http://webDAVserver:1090
Same User Domain = Activated
max. Connections = 300
Regards
Manisha -
Can cm_createdby and cm_modifiedby be filled using WebDAV Rep Manager?
Hello everyone
I have got a rather simple question regarding the WebDAV Repository Manager or perhaps it's more correct to say the WebdAV Protocol.
Does any of you know if it is possible to integrate from a file server into EP KM using the WebDAV Repository Manager, and then be able to show properties like cm_createdby and cm_modifiedby in KM even though the properties were created/edited on the file server?
Kind regards,
MartinHi Julian
If you go to Properties > Summary Tab > Origin for a word document there is both an Author and a Last Saved By entry. I was wondering if it would be possible to map these attributes into KM through the WebDAV Repository manager, but apparently not? (I know these attributes are only available for certain office documents).
This changes my question a bit - and I'm afraid I will not like the answer.
Question:
If I have implemented a number of files using the WebDAV repository manager into Portal KM, is there a way in which I can display an author/document responsible? I guess I cant get the Author-property from the fileserver, but is there any way I can maintain an author/document responsible attribute from KM then? Or is that only possible using CM repositories in FSDB and DBFS modes?
I will not be able to change my integration from WebDAV to CM repositories in FSDB- or DBFS-mode bacuse thay solution does not support SSO.
Kind regards,
Martin -
Error when displaying thumbnails in new repository manager
Hi KM Experts,
I created a new Repository Manager as a copy of /documents.
When I upload Images (jpegs, gifs) in this repository and try to display them using a ConsumterThumbnailExplorer I don't get the thumbnails displayed but the X-symbol that the browser displays when a image was not found. In the /documents repository the thumbnails are getting displayed.
Here is the exception from the trace file:
java.lang.NoClassDefFoundError: sun.awt.motif.MToolkit (initialization failure)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:134)
at java.lang.Class.forNameImpl(Native Method)
at java.lang.Class.forName(Class.java:119)
at java.awt.Toolkit$2.run(Toolkit.java:796)
at java.security.AccessController.doPrivileged(AccessController.java:197)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:787)
at com.sapportals.wcm.repository.manager.thumbnail.ResourceImageThumbnailPlugIn.getThumbnail(ResourceImageThumbnailPlugIn.java:96)
at com.sapportals.wcm.repository.manager.thumbnail.ResourceImageThumbnailPlugIn.getContentThumbnail(ResourceImageThumbnailPlugIn.java:45)
at com.sapportals.wcm.repository.manager.thumbnail.ThumbnailNamespaceManager.getImage(ThumbnailNamespaceManager.java:539)
at com.sapportals.wcm.repository.manager.thumbnail.ThumbnailNamespaceManager.getCreatedResource(ThumbnailNamespaceManager.java:459)
at com.sapportals.wcm.repository.manager.thumbnail.ThumbnailNamespaceManager.getContent(ThumbnailNamespaceManager.java:335)
at com.sapportals.wcm.repository.ContentImpl.internalGetContent(ContentImpl.java:328)
at com.sapportals.wcm.repository.ContentImpl.<init>(ContentImpl.java:84)
at com.sapportals.wcm.repository.ResourceImpl.internalGetContent(ResourceImpl.java:3203)
at com.sapportals.wcm.repository.ResourceImpl.getContent(ResourceImpl.java:1183)
at com.sapportals.wcm.repository.ResourceImpl.getContent(ResourceImpl.java:1147)
at com.sapportals.wcm.protocol.webdav.server.WDGetHandler.internalHandle(WDGetHandler.java:319)
at com.sapportals.wcm.protocol.webdav.server.WDGetHandler.handle(WDGetHandler.java:282)
at com.sapportals.wcm.protocol.webdav.server.WDServlet.doGet(WDServlet.java:791)
at com.sapportals.wcm.protocol.webdav.server.WDServlet.service(WDServlet.java:483)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:333)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.wcm.portal.connection.KmConnection.handleRequest(KmConnection.java:52)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(AccessController.java:246)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172).
Any help is appreciated !
Regards, Andreas
Edited by: Andreas Wachendorfer on Oct 29, 2009 7:05 PMProblem solved: JVM Parameter -Djava.awt.headless=true had to be set....
-
Changing WebDAV repository name
Hi All,
We created a WebDAV repository with name WebDAV in the KM tab. We
tried to change its name through Entry Links but its not possible. Have
we to change anything in the associated IIS and/or in the WebDAV
repository configuration?
Best Regards,
AshwinHi,
System Administration --. System Configuraiton --> Knowledge Management --> Content Management --> Repository Managers --> WebDav Repository.
Good Luck
Eduardo -
WIndows File Repository Vs WebDAV Repository
Hi,
Colud you please let me know what s the difference between
windows file repository and webDAV repository .
Thanks in Advance,
AshokHi Ravi,
if you want to integrate a Windows File Server, the file system repository is the easiest way to implement this.
Here you can use the W2KSecurity Manager to manage the access rights.
But all Users have to do an User Mapping in the Portal. That means that they have to save their username and password in the portal before they can access the files. If the password for the file server has to be changed periodically, this method is not very user-friendly.
if you have a WebDAV Server, you could use the WebDAV Repository to connect to this server. In this case you can use the kerberos module to install a really Single Sign-On.
For more information see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1f93f5c-0301-0010-5c83-9681791f78ec
Regards
Sven -
Problem with Integerating Microsoft Exchange server as Webdav Repository
Hi all
We are using MS Outlook 2000.
I created an HTTP system with the exchange server domain name and the corresponding user id and password required for authentication.
Then i created the Repository Manager using WebDav Repository template.But when I go to component monitoring it gives error in the server as server not connected.
How to rectify the error?hi,
Have you set the protocol to SMTP.
You have to create a system alias for the exchange server. have you done with it?
See this link
http://help.sap.com/saphelp_nw04/helpdata/en/1d/3d59fdaa5ebb45967ea107d3fa117a/frameset.htm
regards,
Ganesh.N -
Problem with CM repository manager
Hi
I am trying to access the documents of file server with CM Repository manger(FSDB).The Current portal version is EP6 SP15.I did configuration for production,Development system.i did exactly same.but it is not working in Development system.i created Network path,cache,CM Repository Manger.where should i see the log file to check the error?
While Configure CM repository manager,there is no property to specify DB Connectionpool parameter?
but it is working fine in production system,but not in Development System.
i selected Auto Checkin/checkout parameter while creating CM repository manager.where should i need to check weather this is working or not?
i am not able to see the /etc folder in case of development system ,but able to see in production system?
can anybody helpme out in this regard?
PrasadHi Julian
thanks for your quick response.i checked the commponent Monitor.it is giving an error called:"Startup Error: parameter context is null ".do you have any idea?
Please help
Prasad -
Hi all,
I have created a file repository manager.
I have done the following settings for creating a file repository manager:
Active :checked
Hide in Root Folder: not checked
Send Events :checked
Property Search Manager : not set
Repository Services : not set
ACL Manager Cache : ca_rsrc_acl
Security Manager : W2kSecurityManager
Description
Prefix (must start with /) : /demo
Windows Landscape System : Microsoft_Windows_KM
Read-only : not checked
Lookup mode : caseless
Read-only Content Expiry Delay:
Root Directory:
132.186.124.207\calender
Even after restarting the server, a folder by name calender is not being created in the root in KM content.
What could be the reason?
thanx and regards,
anuradha.Hi Anuradha,
The root in KM Content will have a folder by the name <i>demo</i>(value of property <i>Prefix</i>), not <i>calendar</i>.
BTW I recommend you don't change the prefix to <i>/calendar</i>... as the CalendarRM uses that prefix and so a clash could occur!
Regards,
Ashish. -
WebDav Repository - MS Sharepoint Integration
Hi Everybody,
I'm trying to apply the things I read in the article "Interoperability between SAP Enterprise Portal 6.0 and Windows SharePoint Services" (https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e891378-0601-0010-5386-a3387f1b161b).
It's about configuring WebDav repositories to access HTTP Systems. I'm trying to acces documents stored in MS Sharepoint.
I'm having a problem with security.
The IViews I use to access the WebDav repository I defined are working well and showing the content stored in MS Sharepoint.
My problem is that those IViews are showing the info with the privileges granted to the user I've used to define the HTTP System.
In that config screen, there's a checkbox that says "Same user domain". Its hint says that if it is checked, the credentials of the logged user would be forwarded to the http server, but this is not happening.
I'm logging on to SAP Portal with an user that has no permissions in Sharepoint and i'm still seeing the documents and I can even upload new documents.
Can anybody help me?
Thanks in advance, Fede.Hi all,
the WSS WebDAV Connector (aka "SharePoint WebDAV Connector, SWC) was released some days ago and a new Interoperability Section on Microsoft-sap.com is now live.
See http://www.microsoft-sap.com/technology.aspx --> SAP Enterprise Portal (EP) for the WSS WebDAV Connector.
In the SWC documentation there are some hints for the configuration of the security requirements / authentication types which should be helpful for your problem.
Kind regards,
Robert Draken, Comma Soft AG.
Maybe you are looking for
-
Problems in Internet access in the middle being a modem and Linksys RV016
Good afternoon, I have another problem with Cisco Linksys RV016 Router, the router used to connect to ADSL Internet 3 links which these in turn give direct service to a server right now each of them, the idea is to connect the 3 modems LAN router and
-
Trouble combining files in Acrobat Standard X
We are trying to combine existing PDF's into a single PDF "packet" file. However, we are running into issues where Acrobat is displaying an error/warning of "Please remove problem files from the list or choose the Portfolio option." The "problem fi
-
I had to create a Huge 51 page PDF with graphics and the size is 21mb, but whenever I try to save it, it will take 30 minutes to do so. If I try to do something on the side, It will freeze and eventually crash the program.I open the Task manager, it
-
Bb 9300 app world doesnt work it says a error has occured try again later
My app world does not work it says "a error has occured try again later" every time I try log in, I hav a blackberry I'd and it use to work on the old version, does any1 no hw to fix it
-
Trap update error for insert!
Hi, I have a table approx 2 million records which is updated daily from a staging table that is loaded from file. It's taking approx 7 hours as it searches for a record and if it exists, otherwise it inserts. I was thinking that a faster method would