Webi report publication with org unit personalization mapping

Hi everyone,
I have an HR Webi report whose source is a Bex query and is scheduled (published) weekly. The report is meant for managers so in the dynamic recipient report (another webi report) I have manager's name, email and org unit. Right now the bex query does not restrict by organizational unit, the filtering by unit is done in webi through the 0employee's org unit attribute. This works, each manager only sees data of her own employees.
However, managers would like to see not only their direct people (employees belonging to her own org unit) but also submanagers, ie, managers of subordinate org units. I tried filtering through the org unit of 0ORGUNIT, not the employee's o.unit attribute, but that doesn't work. The same manager shows up multiple times in the report.
Has anyone managed to publish a webi report (or Crystal if that's possible) that shows the chief hat's subhierarchy?
thanks

Hi Graham,
The publication should work in the same way for a user or a group.
Can you please elaborate on u201Cassigning a user to the groupu201D, I believe this is probably where you go wrong.
Please test same workflow I suggested yesterady, but instead of user, use the group:
1. create the profile
2. add the group to the profile
3. assign the profile value to the group for that profile
4. add the group to the publication as Recipient
Does it work or not? If so, then do as follow for the user and group:
1. create the profile
2. Add user and group to the profile
3. assign the profile value to the user and group for that profile
4. add the user and group to the publication as Recipient
Please note that in the above steps, you donu2019t have to assign the user to the group.
Regards,
Jeff

Similar Messages

WEBI Report Publication

Hi All,
I have created a simple BO WEBI report publication with Enterprise and Dynamic reciepent. But everytime it goes into <b>Pending </b>status.
Please suggest me what's the reason any ideas.
Thanks in Advance.
Regards,
Akash Jain

Hi,
Below SAP solution found in BOB Forum.
Apply this solution, it will works fine !!
Just add this -javaArgs "Xmx900m,Xincgc,server" in the command line of the server
Hope this helps:
Symptom
Scheduled WebIntelligence reports remain stuck in 'pending' status after installing Microsoft windows patches of April 2009. Restarting the Adaptive Job Server, Central Management Server or Server Intelligence Agent has no effect.
The Event Viewer logs show the following entry: Unable to start the sub-process (Job Server Child). Cause : Couldn't get IJob interface or writing IAudit: Pipe exception. Reason: jobserverchild (WebIJavaSchedulingService ReplicationSchedulingService, 0, Timeout waiting for Child 4716 to register (120seconds).
Reproducing the Issue
Install Business Objects Enterprise XI 3.x on a French Windows 2003 SP2 32bits server
Install the following Microsoft windows update patches of April 2009:
KB923561, KB925336, KB952004, KB956572, KB959426, KB960225, KB960803, KB961373, KB967715
Schedule a WebIntelligence report
The report remains in Pending status
Business Objects Enterprise XI 3.1
Windows 2003 SP2 32bit (French)
Microsoft windows patches of April 2009
Cause
With Microsoft windows patches of April 2009, the maximum Heap Size for java processes has been reduced to under 1000MB.
Apply the following steps to fix the issue:
Launch the Central Management Console
Select Servers
Right click on <server_name>.Adaptive Job Server and select Properties
Add the switch -javaArgs "Xmx900m,Xincgc,server" in the command line of the server
Click on Save and Close
Restart the <server_name>.Adaptive Job Server
All the Best
Madhu...

Org Mgmt Report with Org Unit, Position, Person and Chef Position

Does anyone know a good report that shows an org structure with Org Unit, positions, person, and also highlights the chef positions?
I would like to link this to our portal, so would prefer a report to transaction PPOME.
Thanks,
Dianna

Hi,
You can generate the required report from reporting tool HIS. select the org structure for which you want the report to be generated.
In the graphical view select the org unit and in the reporting window select organizational plan and select staff assignment as task function.

BO Webi report hierarchy with measure values showing more(almost double value) compare to BW Bex report

Hi,
In our BO Webi report hierarchy with measure values showing more(almost double value) compare to BW Bex report. Can any one please help on this.
Is it BW problem or BO problem?
I checked in some other threads but it's not given solution.
Thanks,
Manjunatha

Hi,
Is it BW problem or BO problem? : BO
is it causing problem with hierarchly data only ? without hierarchies data is matching or not?
Post same in SAP BusinessObjects Web Intelligence .
Thanks.

SAP BO 4.1 Webi report sample with prompts to try Restful api

I was not able to find, in the report demo samples available in the SAP BO 4.1 installation, a Webi report with prompts.
I found many Webi reports samples but all are without prompts.
I need at least one Webi report sample with prompts to try the Restful API http://localhost:6405/biprws/raylight/v1/documents/7090/parameters and http://localhost:6405/biprws/raylight/v1/documents/7090/schedules with parameters body.
Where can I found such webi sample?
Thanks,
Riccardo

As you have BI 4.1 installed, you could design a sample webi report using Webi Rich Client tool.
Open Webi rich client, select the sample eFashion universe drag few objects in the query and a filter. Set the filter as a prompt and save the report to Enterprise.
Now you could now use this sample report for your handson on REST SDK.
-Bhushan

How to run webi report automatically with the current date/system date in webi report

Hi Friends,
I have a webi report which has a date prompt now. Based on the selection that user makes while running a report, he will get the related data for that particular date selection. Now I want to make that date prompt automated that is the report should run automatically based on the system date daily on scheduling.
I want it to run current day automatically without have to go in and pick the date in webi report. I will be scheduling the webi report. Can you please let me know how to achieve this functionality of running a webi report automatically with a system date.
Please let me know if I couldn't make you understand so that I will write with an example.
Waiting for your valuable solutions.
Thanks in advance.
Regards,
Bhaskar

Hello Bhasakar,
1.Create sysdate object in the universe
2.Create another query in webi and select only sysdate object
3.In the original query drag the Day object in the filter pane and choose the "List of values" from another query.and select the sysdate object from the second query.
So your report always will run for sysdate...
regards,
Naveen D

Org unit reporting to multiple Org units

Hi,
We have set the A002 relationship as time constraint 002 and the B002 is set up as time constriant 3 but we are still able assign the org unit to report to multiple org units. Can you please let me know how to fix this issue.
Thanks
Vick

Hi,
Change the reporting relationshipp time constraint as 1
Regards,
Nitin

One Org unit reports to 2 org.units

We required that one organizational unit reports to two org unit .
How can we achieve that??
Thanks,

Hi,
I don't think we could give 50 for the priority because the data is overlapped if the start date and end date between two objects are same. For Relationship A002 Reports (line) to, we couldn't fill the weighting percentage too. I think you can use another another relationship A/B 262 Reports to. Is it exactly reports to two org. units or there is a priority reporting and additional reporting? If both are priority reporting, I think you can use matrix organization.

One organizational unit reports to two org unit

Hi All,
I am new in HR, please help me to achieve the following:
We required that one organizational unit reports to two org unit .
How can we achieve that??
Thanks,
Anumit

Hi,
In SAP there is one-to-one relationship maintained in the system. In your case you want one org unit should report to 2 Org units, which is not possible as per my knowledge.
The relation betwn thm will be A-002 (Reports to), also if you try to maintain the same for both the Org units then it will ask to delete one of the relationship in the system.
Regards,
Prasad

Webi reports compatibility with IE8

Hi All,
BO 5.1 reports are published as webi reports on web server.Users would view/edit the reports from the webpage. Currently IE6 is installed on web server and it will be upgarding to IE8 on it.
My question is - Is BO 5.1 version webi reports compatible with IE8 or not ?
If yes,then can you please tell me what browser based components that has to be tested for BO and the test plan(If any).
Warm Regards,
Srinivas
Edited by: Srinivasulu_Infosys on Feb 4, 2011 9:32 AM

Hi Denis,
I came back to work again after long leave. Thanks for your good answer
Warm Regards,
Srinivas

Report to check org units without any position display

Dear All,
I want a report which i can see only the org units in a graphical way. When i am checking through Simple maintainence mode I am getting org units along with positions also with in the graphical mode i have selected the view option under options menu there can able to see individual departments along with positions.
My request is i want to see the organization structure along with sub org units under sub org units with departments without positions. please let me know is there any standard reports available.
Regards,
HR user

Yes, the Report is
S_AHR_61016493-Organizational Structure-Organizational Structure
Select the first line and press F8

How to extract an employee reporting hierarchy per org unit in spreadsheet

Hi Guys,
Can any one advise if there's a standard report I can use to see employee's reporting hierachy in spreadsheetformat ?
Report must have per org unit positions with their related positions :'reports to' A002 relationship between two positions in a specific org unit and person's name/employee number occuping the positions.
I tried creating joint table but battling to undestand how I can have the two related positions info in the infoset.
Current standard report give me only positions with reports to relationship but haven't found report showing me positions with reports to relationship and their related position.

Have you tried using logical database PCH? That gives flexibility to create this kind of report. Create an infoset in SQ02 and an Adhoc Query in SQ01 based on PCH Logical Database. You will need the relationship subtype 'A002' and related object type 'P' on selection screen.
Edited by: Shafiq Rehman on Feb 6, 2008 4:23 PM

OM - Multiple Cost Centres link with Org Unit/Position not to employee

Hello gurus,
In OM there can only be one relationship at a time between an organizational unit and cost centre (A011). For those areas where there is a requirement for the position to have control over more than one cost centre, there are multiple options.
Option 1 - If only one of the cost centres is used for employee cost incurrence, this should be the main cost centre, and the others controlled through authorizations.
Option 2 - If more than one cost centre is used for employee cost incurrence, a subordinate organizational unit is created into which those positions are placed. In this scenario, the subordinate organizational units would not have a chief, and the reporting structure would go up to the more senior organizational units.
Option 3 - Use Cost centre distribution infotype 1018 (A014)
My question: is there a standard way through which we can show multiple cost centres attached to a position/org unit such that cost incurred by employees goes to master cost centre attached to org unit or positon and other cost centres are just attached to position/orgunit (just to show the org unit/position is managing these other cost centres as well).
Any thoughts? Anybody has used Enterprise Organization in CO to achieve this?
Regards,
Ahmad

To capture more than 1 cost center, you have to specify them in IT-1018 but employee's cost will be split based on this.
For data maintanance alone cost distribution is not possible (based on my knowledge).
May be equivalent custom infotype similar to 1018 @ Postiion / Org Unit level may work.
along with Master Cost center.

Sap Query Web Reporting - Issues with accents

Hi,
We was using Web Reporting for Sap Querys, throw this tool we can generate automatically web reports.
When we go to generated web report, selection screen show us character &#56292; instead accent letters.
In addition to this, generated web report shows two buttons with german text: "report ausf?" and "Werte zur?zen".
Guaranteed Rewards points.

Hi Peluka,
are these web report generate by SAp Query ITS based. If yes this is the right forum to ask, if no I would sugest to ask in the BI forum.
Best regards,
Klaus

Moving The Chief Including Direct Reports to Another Org Unit

Dear Expertise,
We have a request to move the manager including his direct reports employees to a different org unit.
I'm looking for a way to achieve this through function module.
Can anyone shred some light or if any Standard FM available to reuse?
Your Sincerely,
SE

Hi,
certainly I do not believe there is any standard code for doing this.
Are you trying to code up an application that lets you do this? If so, the have a look at the decoupled infotype framework classes (CL_HRBAS_* ) for maintaining OM infotypes - you could use these to delimit the old relationships and create new ones in the target org unit.
In particular have a look at class - CL_HRBAS_PLAIN_INFOTYPE_ACCESS.
if you're just looking for an easy way to do it - lots of dragging and dropping in PPOME would probably be the easiest!
hope that helps,
Chris

Webi report publication with org unit personalization mapping

Similar Messages

Maybe you are looking for