What port does WRT1900Ac listen on for remote admin

good morning,
I have had a few problems with linksys smart wifi (periodically cannot connect).
traditionally I run dynDNS so I can connect to devices remotely (using port forwarding) and this works fine for me.
what port does the linksys router itself listen on for remote router admin requests (i.e http://publicipaddress:whatport) 
also, is this configurable?
thanks
Dan

danielgwalter wrote:
good morning,
I have had a few problems with linksys smart wifi (periodically cannot connect).
traditionally I run dynDNS so I can connect to devices remotely (using port forwarding) and this works fine for me.
what port does the linksys router itself listen on for remote router admin requests (i.e http://publicipaddress:whatport) 
also, is this configurable?
thanks
Dan
You have to use a Smart Wifi account for remote administration on the WRT1900AC
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Similar Messages

  • What "ethernet port" does airport utility use for "remote administration"

    I have a friend who was recently evangelized to Macs and bought a Macbook Pro and an Apple Airport Extreme (gigabit) Router, hereinafter called AE. The place where he lives has cable modem internet access and an older Linksys wireless-G router for the building, and I am trying to configure his new AE, prior to making it the primary router in the network (e.g. connected to the cable modem).
    When the AE is completely configured the Linksys will be retired.
    I remotely manage and maintain the network and some other computers in that house. The Linksys is configured for Remote Administration so I can manage it. I manage several PC's and Macs using Timbuktu Pro 8, with the necessary ports forwarded through to TB2 on those machines.
    I am trying to configure the Airport so it also can be managed remotely, so from a workstation on that network (accessed from where I am using TB2) and running Airport Utility, I have checked "Allow setup over WAN" on the Airport/BaseStation page. Now I would like to test whether I can connect and remotely administer that Airport Extreme from Airport Utility on my Mac.
    I assume that, if I can rout packets from my Airport Utility here through the internet to the public IP of the Linksys router there, I should be able to connect. But I can't.
    My setup is this. The target AE has its WAN port connected to an ethernet port on the Linksys, as is the LAN in the remote building. Nothing is connected to the AE's ethernet ports at this time. The Linksys is the DHCP server, and the AE has an IP from it, as does all the other ethernet- and wireless-connected computers, printers, etc. The AE's wireless is active and the wireless-connected devices in the building can connect to either its base station or to that of the Linksys. When the Linksys is retired the AE will be the only wireless in the building.
    I attempt to connect in the following way: On my Mac, I run Airport Utility. From the file menu I select "Configure other" and enter the public IP address of the remote Linksys, and give AE's password. There is a long wait
    Reading the Airport wireless device configuration....
    while Airport Utility tried to discover AE, and then
    An error occurred while reading the configuration..... (-6753)
    I suspect that my remote connection problem is due to the fact that the AE is behind the Linksys, and the proper port forwarding is not in place on it to pass the Airport Utility's packets through to the Wan port of the AE. This might be that I have not entered into the Linksys the correct port number to forward on to the AE. I've tried the three numbers in the list:
    "Well known TCP and UDP ports used by Apple software products" found at
    http://support.apple.com/kb/ts1629
    that are mentioned as possibly being involved with Airport Utility; 192, 4500 and 5009.
    Advice will be appreciated.
    Bob

    One example, and there may be others, is the (free) DynDNS dynamic DNS service which publishes a domain name for the WAN port of your router which can then be resolved, like all other domain names, to the actual IP address of the WAn port of your router. This service provides a solution to the problem of having a proper domain name in cases where your public IP address changes over time. Unless you pay for a static IP address, virtually all ISPs change your public IP address over time.
    So, you can register for a free DynDNS account at www.dyndns.com and that is how you come up with the User: and Password: information; use whatever User and Password you register at dyndns.com with.
    The first part of the hostname you can define as you wish, subject only to someone else having used it previously, and the remaining parts of the domain name might be "dyndns.org" or one of the other domain names provided by the DynDNS service. So, you could publish, via DynDNS, the name of your public IP address as, for example, joehlam.dyndns.org however you might want something less descriptive or more vague.

  • What ports does icloud use for mail?

    What ports does icloud use for mail?

    Read > http://support.apple.com/kb/HT4864 iCloud uses 993 for IMAP and 587 for SMTP

  • What ports does iTunes update podcasts over?

    Hiho
    Lately I never succed in updating podcasts while using my 3G data ISP. I suspect they block ports. What ports does iTunes require to download new podcasts?
    /peter

    Hi Jan,
    I am sure the Apple Doc is right.
    The Doc was originally written for iChat 2 when you could only chat 1-1
    Obviously with an eye on the future, and of the potential for the data traffic to get busy in some locations, allows for the extra ports allocation.
    If you are in a 4 way Video chat then that would be 16 ports.
    Now in iChat 2 Audio chats used to make use of the same four ports. But as 10 way Audio chats are possible it seems likely this has been changed in multichats to use all twenty ports.
    ( I am also sure that 16384-16403 is 20 ports )
    10:01 AM Saturday; September 1, 2007
    Message was edited by: Ralph Johns (UK)

  • What ports need to be opened for Podcasting?

    To all,
    I am a little lost. We have a server which is inside our firewall. What we're trying to do is to use this server as a test bed for podcasting. Our network admin is going to set it up so that it's behind the firewall but we can still access the content from home or anywhere. Now my question. The admin has asked us what ports need to be opened for podcasting. We have no idea. Is this something we need to setup on the server we are using or is there something else.
    FYI - We are using a Windows NT server...I know, I know, I need to upgrade.
    Any help is greatly appreciated. Thank you in advance.
    zanm
      Other OS   windows NT server

    Podcasting is not streaming on content, only downloading. It is basically a blog with an attachment in the RSS feed. Only port 80 (normal web port) needs to be able to go through the firewall.

  • HT4199 WHAT PORTS DOES APPLE TV USE?

    WHAT PORTS DOES the APPLE TV USE?

    Google "Apple TV ports" and you get
    <http://support.apple.com/kb/HT2463?viewlocale=en_US&locale=en_US>

  • What exactly does the AppleCare cover for MacBook Pro with Retina Display?

    I purchased the extended protection plan for my MacBook Pro with Retina Display 15" and my question is what exactly does it cover in what kind of situations (i.e. viruses, damaged ports, damaged charger, etc.)? I want to be able to take full advantage of the protection plan since it was a pretty big whole in my wallet.

    AppleCare covers all the problems you have with your MacBook Pro with Retina display and the peripherals which came with it (your charger) if you have a hardware problem that you didn't cause. For example, after 2 or 3 years and 1000 charges, OS X says that your battery has to be replaced: in this case, you have to pay for the battery, because batteries have got a lifetime, and Unibody Macs batteries have got an average lifetime of about 1000 charges.
    However, if the RAM gets damaged and you haven't done anything to cause it, you will get your computer repaired or replaced for free. AppleCare in a MacBook Pro with Retina display is very important, because near all the parts are soldered into the logic board and repairs are expensive

  • What Ports Does Mail Open, and Why?

    Mavens of Mac Mail Internals,
    While trying to debug my lightly-loaded-yet-consumed-by-spinning-beach-balls 27" iMac running OS X 10.8.4...I've observed in Activity Monitor that Mail has 33 threads and 496 ports in use.
    Huh?
    Why would Mail possibly need so many ports open? What ports? What kind of ports?
    Are all the ports Mail is using the same type of port as 25, 587, or 993...or, is Activity Monitor reporting the system's consumption of another type of port? Or...what?
    And...what's typical? How many threads and ports should Mac Mail have running and open at any point in time?
    Baseline: My Mail setup is provisioned for 8 GMail mailboxes, 1 Hotmail mailbox, 1 Google Apps (Mail) mailbox, and 1 company mailbox.
    Objective: Trying to determine what relationship Mail has, if any, on the increasing number of spinning beach balls infecting my system.
    Thanks in advance for your assistance! Much, much appreciated,
    Plane Wryter

    Ahh!
    So...Is Activity Montior reporting on the number of open IPC (Inter-process Communication) ports?
    Is that what's going on?
    Would this explain why coreaudiod has 1,077 ports open?
    If so, any idea as to why? Why does either Mail or Coreaudio need so many internal ports open?
    BIG THANKS for the insight and clarification.
    Best,
    Plane Wryter

  • What ports does ACS 3.0 use

    We run ACS 3.0 on a windows 2000 sp. 4 server. A nmap scan shows a lot of open ports, e.g. 7/tcp, 9/tcp, 13/tcp, 1050/tcp, and also some udp ports.
    Does anyone know what ports the Acs use ?
    Regards
    Johann Folkestad
    Volda Univesity College

    ACS ports for administration
    HTTP administrative access (login)TCP 2002, ACS distributed logging TCP 2003, Administrative access (after login) port range 1024-65535 (its possible configure)
    Than RADIUS and TACACS+ ports
    Radius UDP 1812 and 1813 (or according old RFC UDP 1645 and 1646)
    TACACS+ TCP 49
    M.
    Hope that helps, rate if does

  • What port does podcast capture use????

    I cannot find any docs on this. I can use Podcast Capture/Podcast Producer when I am IN the network, but not when I am away from the office.
    What ports can I open up on the firewall to make this work from anywhere???

    Click here for information.
    (32067)

  • What ports does a Officejet Pro 8500 require to be opened?

    I have an Officet Pro 8500, but my CA Anti Virus (provided by Road Runner) is blocking Network printing from my DeskTop.  Can you tell me what ports that the  Officet Pro 8500 uses?  Also are there are any documented instructions for this?

    This document may give some answers possibly:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c00035717&cc=us&dlc=en&lc=en
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • What ports need to be open for device enrollment?

    I'm able to install the trust profile on an iPhone, but when I attempt to "Enroll" my device and I click "Install" it begins the process,
    Installing Profile, Generating Key, Enrolling Certificate and gets stuck and reports a network issue.
    I'm also hoping we can get our hands on some proper lion documentation. The resource page is pretty bleak right now.

    Yea they should have that info on the kbase.   I have been reading up on this as well, as my clients never worked and finding out you need ports open.
    I believe this is correct, if not someone correct me:
    Ports for Profile Manager - 2195, 2196, 5223, 1640, 80, 443   Apple Server block to open too:  17.0.0.0/8
    TCP Port 2195 and 2196 should be "oubound" from Profile Manager Server to 17.0.0.0/8.
    TCP Port 5223 "outbound" from LAN for clients to 17.0.0.0/8
    TCP Port 443 and 1640 "inbound" to Profile Manager server.  I would think port 80 as well, but any login I would put a cert on and use only 443.  Not sure if 80 is really needed.

  • What ports does Xserve usesfor Global range?

    I am setting the modem to for ward to global ports range but not sure what the range is.:(

    AFAIK, strictly, "modems" don't forward ports. "Modems" and "bridges" are comparatively transparent devices; from the perspective of a network protocol, such electronic devices are largely indistinguishable from the equivalent wiring, for instance. "Modem" devices that provide a combination of modem, firewall and IP router can forward ports. And forwarding all ports through a firewall is usually a bad idea.
    Modem: MOdulator-DEModulator. They're at the lowest levels of the classic Seven-Layer Network Model, and below routing and firewalls and such. But I digress.
    The typical case is forwarding a select few ports, such as port 80 for http web traffic.
    Each port opened through the firewall should be justified, as each port forwarded will be attacked.
    Some "modem" devices (those which have firewall and IP routing capabilities) can have something they call "global ports", and that's seemingly how the particular vendor, um, allows the end-user the joy of researching and identifying the protocol-specific ports for the task at hand.
    With this scheme, the end-user gets to go look up the ports for the particular service, and fill those in for whatever you're looking to forward.
    For forwarding http using port 80, that would be the "global port range" of 80 to 80, for instance.
    [Start reading here|http://portforward.com/routers.htm] for your specific "modem" device.
    I'm taking a very wild guess here around what you're doing and what you're looking at. If I've guessed wrong, some background, some more words around the goal, and some specific device identifications would be helpful in addressing your question.

  • What algorithm does Excel 2010 use for Pseudo Random Number Generation (MT19937?)

    Does Excel 2010+ use the Mersenne Twister (MT19937) algorithm for Pseudo Random Number Generation (PRNG), implemented by the RAND() function?
    This has been a nagging question for some time now, with "hints" that it indeed does.  However, a relatively thorough search turns up no definitive documentation.  The most direct indication is perhaps given by Guy Melard [Ref 9] where
    he tests Excel 2010's RAND() function using the Crush battery of tests in TestU01 by L'Ecuyer & Simard.  Melard references a "semi-official" indication that Microsoft did indeed implement MT19937 for the RAND() function in
    Excel 2010, but this reference no longer seems to be available. http://office.microsoft.com/enus/excel-help/about-solver-HP005198368.aspx?pid=CH010004571033.
    The other references below [Ref 1-10] document the history of the statistical suitability of the PRNG and probability distributions in various versions of Excel.  This includes the Wichmann-Hill PRNG implementations supposedly (arguably) used in
    Excel 2003 & 2007 for random number generation.  But still, we have no answer as to which PRNG algorithm is used in
    Excel 2010 (and 2013 for that matter).
    Microsoft indicates that RAND() has been improved in Excel 2010; Microsoft states, "...and the RAND function now uses a new random number algorithm." (see https://support.office.com/en-ca/article/Whats-New-Changes-made-to-Excel-functions-355d08c8-8358-4ecb-b6eb-e2e443e98aac). 
    But no details are given on the actual algorithm.  This is critical for Monte Carlo methods and many other applications.
    Any help would be much appreciated. Thanks.
    [Ref 1] B. McCullough, B. Wilson.  On the Accuracy of Statistical Procedures in Microsoft Excel 97. 
    Computational Statistics & Data Analysis. Vol. 31 No. 1, pp 27-37. July 1999.
    http://users.df.uba.ar/cobelli/LaboratoriosBasicos/excel97.pdf
    [Ref 2]L. Knüsel.  On the accuracy of the statistical distributions in Microsoft Excel 97. Computational Statistics & Data Analysis. Vol. 26 No. 3, pp 375-377. January 1998.
    http://www.sciencedirect.com/science/article/pii/S0167947397817562
    [Ref 3]B. McCullough, B. Wilson.  On the Accuracy of Statistical Procedures in Microsoft Excel 2000 and Excel XP. 
    Computational Statistics & Data Analysis. Vol.40 No. 4, pp 713-721. October 2002.
    https://www.researchgate.net/publication/222672996_On_the_accuracy_of_statistical_procedures_in_Microsoft_Excel_2000_and_Excel_XP/links/00b4951c314aac4702000000.pdf
    [Ref 4] B. McCullough, B. Wilson.  On the Accuracy of Statistical Procedures in Microsoft Excel 2003. 
    Computational Statistics & Data Analysis. Vol.49. No. 4, pp 1244-1252. June 2005.
    http://www.pucrs.br/famat/viali/tic_literatura/artigos/planilhas/msexcel.pdf
    [Ref 5] L. Knüsel. On the accuracy of statistical distributions in Microsoft Excel 2003. Computational Statistics & Data Analysis, Vol. 48, No. 3, pp 445-449. March 2005.
    http://www.sciencedirect.com/science/article/pii/S0167947304000337
    [Ref 6]B. McCullough, D.Heiser.  On the Accuracy of Statistical Procedures in Microsoft Excel 2007. 
    Computational Statistics & Data Analysis. Vol.52. No. 10, pp 4570-4578. June 2008.
    http://users.df.uba.ar/mricci/F1ByG2013/excel2007.pdf
    [Ref 7] A. Yalta. The Accuracy of Statistical Distributions in Microsoft<sup>®</sup> Excel 2007. Computational Statistics & Data Anlaysis. Vol. 52 No. 10, pp 4579 – 4586. June 2008.
    http://www.sciencedirect.com/science/article/pii/S0167947308001618
    [Ref 8] B. McCullough.  Microsoft Excel’s ‘Not The Wichmann-Hill’ Random Number Generators. Computational Statistics and Data Analysis. Vol.52. No. 10, pp 4587-4593. June 2008.
    http://www.sciencedirect.com/science/article/pii/S016794730800162X
    [Ref 9] G. Melard.  On the Accuracy of Statistical Procedures in Microsoft Excel 2010. Computational Statistics. Vol.29 No. 5, pp 1095-1128. October 2014.
    http://homepages.ulb.ac.be/~gmelard/rech/gmelard_csda23.pdf
    [Ref 10] L. Knüsel.  On the Accuracy of Statistical Distributions in Microsoft Excel 2010. Department of Statistics - University of Munich, Germany.
    http://www.csdassn.org/software_reports/excel2011.pdf

    I found the same KB article:
    https://support.microsoft.com/en-us/kb/828795
    This was introduced (according to the article) in Excel 2003. Perhaps the references in notes 2 and 3 might help.
    The article describes combining the results of 3 generators, each similar to a Multiply With Carry (MWC) generator, but with zero carry. MWC generators do very well on the Diehard battery of randomness tests (mentioned in your references), and have
    very long periods. But using zero carry makes no sense to me.
    Combining the three generators only helps if the periods of the 3 are relatively prime (despite what the article implies). Then the period of the result will be the product of the 3 periods. But without knowing the theory behind these generators, I have
    no idea what the periods would be. The formulas for MWC generators fail here.
    Richard Mueller - MVP Directory Services

  • What exactly does "convert [video] selection for iphone" do?

    I have a lot of video, both movies and tv shows, that I've used ffmpegx to convert (usually from .avi) to an AppleTV preset in h264. As it stands, iTunes won't allow me to put them on the 3G. (I know some people have had problems with putting h264 on their 2.0 firmware phones, but this question is a little different.) If I tell iTunes to convert the selection for me, what happens? Does it duplicate the video in two resolutions? Will it reduce the resolution and make the video look worse on my AppleTV? Or is it completely harmless?
    Also, is there any reliable way to convert video in a batch, perhaps with a third-party program? It's pretty obnoxious that you can only convert one video at a time, slowly, with iTunes.

    The iPhone can play these formats:
    H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats.
    What ever you do its going to take a long time to convert a large library. Which is why I recommend the Turbo.264. I'm converting a full length movie to iPhone format at 48fps as I write this. Also because the Turbo takes the strain off the Mac I can carry on using my computer with no problems.

Maybe you are looking for