Where is OK button after checking new cartridges while installing new printer

Am installing a new hpENVY5660 on my Apple PC Yosemite version. Things go well until I put in in new in cartridges that came with printer. Get message ink cartridges problem. Checked both cartridges and still get message that tells me to "touch OK . I've tapped everything on the screen and nothing happens. In searching a solution, I find a message saying something about if my Apple Yosemite installation is newer than the printer, it will not operate. Is this my problem or can you help me find "Touch OK?

Hey @mraf ,
Thank you for taking the time out of your day to ask that question on the HP Forums today!
I understand you are getting a cartridge error that says touch ok to continue and you are not able to find the "ok" button.
I recommend unplugging the printer for 3-5 minutes and plugging it back in. See if that message comes back. If it does let me know and we can go from there.
Also Yosemite is compatible with this printer so don't fret about that.
Have a good day, look forward to hearing back from you.
I worked for HP.

Similar Messages

HT2311 After waiting 27 minutes while the new iTunes supposedly downloaded onto my computer, the Finder window did not appear, and the iTunes.mpkg icon didn't appear on my desktop (where downloads usually go). What do I do?

After waiting 27 minutes while the new iTunes supposedly downloaded onto my computer, the Finder window did not appear, and the iTunes.mpkg icon didn't appear on my desktop (where downloads usually go). I also looked for the new iTunes by clicking on my Hard Drive icon but didn't see it there either. I only see the icon for the old iTunes. What do I do?

The exclamation mark means that the app has lost the link to the actual file.
First step: try and make sure the iPhoto Library is working correctly:
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Will the penfailure be solved after changing the cartridges? Installing printer again did not help.

Hp Print Diagnnostic Utility detected 'Pen Failure' I tried reinstalling printer driver again, checked cartridges installation for correctness, cleaned contact points but they did not help. Will the penfailure be solved after changing the cartridges? Installing printer again did not help.
Rajein

Yes, I did try it.
I completely uninstalled Firefox (including personal settings, bookmarks, add-ons etc.) and then I installed Firefox 24 from scratch. The outcome is unchanged. Namely, it installs it and then right when it is about to start for the very first time, it hangs. If I run the task manager I can see the process firefox32. It shows as if it is running. But in fact it is hanging doing nothing. It is almost as if the process is waiting for something to happen and that never occurs. Note that this should not have anything to do with, say, an incompatible add-on/plug in because I had them all removed. I also removed adobe flash prior to the installation and run the malware removal program too.

Printer MX410 will not print but a few copies after new cartridge is installed.

Somewhere I read that there is a solution to reset the printer. However, I don't remember what or where it is. My printer is almost a year old, is not connected to a computer but used just for copies. Therefore network and computer problems are not a factor. Error message comes up after printing 9-10 copies. A new cartridge does not solve the problem, nor does resetting.
Any help would be appreciated.

Hi Louisegberg,
Please try turning the printer off, and unplugging it, for at least ten minutes. If the error returns, please let us know which error code you are running into, and we'll be happy to further assist!
If this is a time-sensitive matter, additional support options are available at Contact Us.

Where are the buttons gone File upload and Download in New ABAP Editor

Where are the buttons gone of File upload and Download in New ABAP Editor in ECC 6.0.
Or some new utility added for this feature.
Kindly guide.
Thanks,
pradeep

Go to Utilities>more Utilities>upload/download is there.
Amresh.

Help[: Laserjet 1300: Printing blank pages (new cartridge & drivers installed)

Hi All, printer keeps printing blank pages, just bought a new cartridge and even re-installed the drivers- can anyone perhaps advise as to a way to resolve as I am urgently needing to print?

Forgot to mention that I am not getting an error message either, except when I go through the motions of scanning the (blank) alignment page. That error is related to the fact that it is blank though.
Thanks for any assistance.

Please Help, Error Encountered while installing new drivers upd

Hi,
I've down loaded the new update driver for X-Fi and encountered the following error, while updating my X-Fi Pro sound card.
===============================
>SetupDLL\SetupDLL.cpp (298)
aAPP:Sound Blaster X-Fi Drivers Web Release
PVENDOR:Creative Technology Ltd.
=================================
Error Code -5002
) I've tried uninstalling my X-Fi pro and restalling it and still the error appear.
2) I've stopped all programs and still the error appeared on screen.
Any help is much appreciated.
Thanks,
Chris

Hi Jean
Pls find the details and the procedure we have tried with.
Pls let me know in case any other information is required.
The Versions we are using are as follows
DB : Oracle 9.2.0.3.0 on sun solaris
OWB Client : 9.0.4.10.0 (after applying patch:Patch 9.0.4.10.0)
OWB Repository : 9.0.4.0.27
Database is located on on sun solaris and we are trying install the target user from Windows Professional 2000.
The target schema user is created and assigned to default tablespace.
We are doing as per the instructions in the Runtime Assitance Wizard.
1. Initaited the Runtime assitant Wizard from my Windows machine.
2. Provided the required database information and sys user id and password.
3. Checked the option target Schema (As Runtime Repository, Access User and 3 to 4 target schemas are already available). We are trying to install anothor target schema.
4.Selected create a new warehousebuilder Target Schema
5. Provided the Runtime repository owner userid and password which was created long back.
6. Then selected install into an existing user schema and provided the userid and password of the new user which our dba has created using create user option(provided with minimal previleges like connect, resource etc).
7. Then we have selected the tablespaces from the drop down list available (where we have selected the default tablespaces that were assigned by our DBA)
8. After selecting the finish button after sometime it has thrown the error mensioned in my first Post.
9. The log details are also posted in my first post.
Thanks and Regards
Nanda Kishore

Error while installing new com+ component SAP CRM Mobile Transfer 5.0

Hello experts,
I've upgraded crm/msa from 50sp6 to sp11. In SP11 there msa/mas use dot.net framework
2.0 .
For this I have to upgrade the commstation with note 1065337, but after deleting
the com+ component DOTNET.TransSrv I cannot reinstall the new MsgTransServer.dll,
I get error:
you do not have permission to perform the requested action. If security is enabled on the system
application of the targed computer make sure you are included in the appropriate roles.
Has anybody similar problems while upgrading this ?
I've checked MS-note 909444 for new user rights, but didn't help.
Thanks Gerd

Hi Siva,
I've registered the dll with command line execution as described in
note 1036377. This should solve the problem.
If you have still problems with admin rights on the server have a look on
note 1036377.
Best regards
Gerd

Problem with NEW H520 when installed new power supply & graphic card. Please help!

My H520 was working perfectly and was running FAST..especially when rebooting. ( It was AWESOME! )Then I installed a new power supply (Coolmax 400w) and a new graphic card (Sapphire Radeon HD6450) and then everything changed. Now my computer is booting very SLOWLY and all the programs are taking a long time to load too. I was getting a black screen for almost a full 2 minutes before the windows 8.0 screen would finally load up and then it hangs there for a few seconds and finally goes to the start screen in windows. But BEFORE I installed this new hardware, when I would reboot, I would see the Lenovo splash screen come up for a few short seconds and then it instantly went to the windows welcome screen. And even then I would barely have enough time to see the welcome screen before it instantly loaded into the windows start screen. Everything would load up fast on the desktop too and we'd be good to go. It all took about 30 SECONDS.
But now? It takes MINUTES to get everything going. After it FINALLY loads up (it takes almost 2 full minutes now!), everything hangs up. When you first click on the desktop, it takes a few seconds for all of the icons to pop up. Before I loaded the new hardware, everything loaded up instantly. I didn't even see the icons load because they were already there. But now I have to wait for them to load up before I can even see them. And it's like that with every program and web browser I try to use now. Everything hangs up at first and then finally loads. The programs work but they are sluggish.
So I uninstalled the new power supply and put back in the original 280w power supply and I took out the graphic card but it did no change. The machine is STILL running slow on everything it does and booting very slowly.
I have seen this problem mentioned elsewhere about Lenovo computers but there is never a solution. Please help! It took me a long time to save up for this computer and I have been babying it ever since. I will never be able to afford a new one or pay for tech repair. I need to fix this! I was so thrilled with this computer before the hardware upgrade. This is devastating to me that it is working so poorly now when all I was trying to do was upgrade it a little bit.    Now it's performing horribly and it's only 6 months old.
I ran a four hour test on the hard drive and it is fine. I ran all the system clean ups, optimizations, registry cleanups, windows disk cleaner, defragger and virus scans. Nothing is showing up as not working but there is CLEARLY a problem. It was never this slow.   And why is it STILL acting this slow even after I uninstalled all of the new hardware that made it start acting this way and went back to the original setup?
I'm trying to run a memory test on it now but the BIOS will NOT allow me to select another drive to boot from so I can't boot from the flash drive or CD drive to run the memory test. I have NO IDEA what to do next and I am starting to pull my hair out in frustration.
Please, is there anything that can be done to make it better again?
Any help would be HUGELY appreciated. Thank you!
Sincerely,
Jennifer

I totally give up!! I restored everything to the ORIGINAL state with drivers AND hardware and STILL everything is not working properly like it was BEFORE the upgrade.
So this has been the WORST experience with Tech support EVER!! I have spent DAYS on the phone for HOURS with these technicians and nobody seems to know what they are doing. They put me on hold every 10 minutes and are gone for 10 to 15 minutes and when they come back, they seem all set on a new solution but when you ask them questions about it, they have NO CLUE how to answer and then they put you on hold again. Nothing gets solved and after HOURS on the phone, I just tell them to stop because we are getting no where but running around in circles that make no sense. THIS A NIGHTMARE!!
So I totally gave up on being able to upgrade this machine. To any future buyers, I STRONGLY recommend you do all upgrading BEFORE you get it home for the first time. Make sure you have your power supply and graphic card INCLUDED before you bring it home or you're mostly likely going to have a NIGHTMARE upgrading it later.    Technical support is a HORROR STORY and expect to be WAITING for LOOOOONNNNG periods of time both ON THE PHONE and ONLINE and probably ending up with NO SOLUTION in the end.
I've VERY upset with how this turned out!! I'm just gonna have to deal with the fact that my computer is permenantly messed up and NOBODY AT LENOVO knows how to fix it. So I'm stuck.
I decided to send back the new power supply and the new graphic card because of this nightmare with tech support. I put everything back to the way it was when I bought the computer and it is STILL acting up!! I just want to revert it back to factory settings .. INCLUDING THE BIOS... but Lenovo said I have to send the WHOLE computer back to them to do that. All I can do from home is restore from a point in the hard drive and that's not enough. I need a TOTAL CLEAN INSTALL. Everything needs to be wiped out and reset, not just restored to a previous restore point. I've done this multiple times and all it does is erase all the programs and stuff I put on the computer. The drivers and other codes are still the same. And then bugs come up and things get all wonky. I NEVER HAD THIS PROBLEM BEFORE I TRIED TO UPGRADE IT!!
I am NOT comfortable with Lenovo's "solution". I do NOT want to send my computer back to them for them to reset it with factory disks ESPECIALLY when they stated that they are NOT responsible for any damage in transport or otherwise. I have to buy extra packaging to make sure it gets there safely. They told me to use the original box and packaging, that is the only way they can be sure it will get there safe. Who has the original stuffing SIX MONTHS LATER?!?! I don't want to be sending my computer across the country to get jostled all over the place and have that add to the slowness of the hardware because it was jostled.
Can't I reset it from home? Can they not send ME the disks instead of me sending my whole computer to them?
I'm so incredibly frustrated with this. I hope somebody answers quickly and that I don't have to wait DAYS to get a response again.
I absolutely LOVED my Lenovo computer! And then I tried to upgrade it. BIG MISTAKE!! Now everything is totally messed up and Lenovo's customer support for technical problems is HORRID!!
Somebody please help. This is driving me crazy with frustration and totally breaking my heart. It took me a VERY long time to save up for this computer and it was my most loved possession. It was a reward for a lot of hard times and now it's all broken and acting slow. And it's only 6 months old.
Is there a solution to this very frustrating problem?
I just want it to go back to the way it was before.
And is there a very low cost KNOWN TO WORK WITH THIS MACHINE upgraded graphic card and power supply? Is there a very specific brand and make? If so, could you let me know what it is in case I try to upgrade it again someday?
Thank you for your time and for reading this!
Please have a FANTASTIC day today!!
~Jennifer~

Re-config of ssh fails after changing Oracle Home while installing RAC

Hi,
Red Hat Linux 5
Oracle 10.2.0.1 RAC installation
While installing Oracle RAC under ORACLE user we are Configuring ssh for the first time works fine. If any changes done (Eg: i changed the home path of oracle user), then the ssh configuration will prompt for password no matter how many times you reconfigure the ssh.
I have created another OS user orclusr instead of oracle to over come this issue
Have any one came across this situation or finds a solution, please reply back.
Regards
hari
Edited by: hariharan.thyagarajan on Apr 8, 2010 12:33 PM

hariharan.thyagarajan wrote:
Hi,
One of the most important reasons for building Real Application Clusters is stability.
Changing the Oracle Home, after the cluster is built is about 180 degrees counter to this philosophy.
I agree with this but we face the error while installing oracle cluster
here is my scenario:
create oracle user on both the nodes(rac1,rac2):
1) my first oracle home - /home/oraclePart of thinking these things through before proceeding is to recognize that the concept of ORACLE_HOME is not the same as the $HOME directory for the OS user who happens to be named "oracle".
Since you appear to be still in the process of building this system, I'd suggest you go back to square one while you can.
2) configure ssh on both the nodes
3) due to sapce constraint in /home mount point we changed the oracle home to /oracle
4) so my new oracle home is /oracle
5) re-configuring of ssh is working fine, no error's
6) but if i issue the below command ssg date rac2 it prompts for password why ?
Any possibility to over come this issue ?
Regards
hari
Edited by: hariharan.thyagarajan on Apr 8, 2010 1:14 PM

How to create new subsite while adding new item to the list by using javascript?

hi,
I hav a task ie, when I add item to the list then subsite will create with that list item title and description . So By using javascript, I have to create subsite while adding new item to the list.
Help me to solve this.
Thank you,

Is your item getting added through Javascript client object model ? If yes, you can write in the success delegate of your list creation method the logic to create the subsite.
function CreateListItem()
var clientContext = new SP.ClientContext.get_current();
var oList = clientContext.get_web().get_lists().getByTitle('List Name');
var itemCreateInfo = new SP.ListItemCreationInformation();
this.oListItem = oList.addItem(itemCreateInfo);
oListItem.set_item('Title', 'My New Item!');
oListItem.set_item('Body', 'Hello World!');
oListItem.update();
clientContext.load(oListItem);
clientContext.executeQueryAsync(Function.createDelegate(this, this.CreateListItemOnSuccess), Function.createDelegate(this, this.onQueryFailed));
function CreateListItemOnSuccess() {
var subsiteTitle = oListItem.get_item('Title');
//Logic to create a subsite
function onQueryFailed(sender, args) {
I have added a sample flow for the above scenario. Have a look at the following lnk for how you can craete a subsite using ecmascript.
http://ravisoftltd.wordpress.com/2013/03/06/sharepoint-2010-create-site-with-ecma-script-with/
Geetanjali Arora | My blogs |

While installing new app prompting for Apple Id & Password

Hi,
Can someone help me out, I have created a new apple id and trying to install new apps(Games), it prompting for apple id & password. When I provide credentials pop up the following message "This Apple id hasn't used in iTunes store yet" .
What should I do now? Help is much appreciated. Thanks.

There is no fee for creating an iTunes or App Store account. But, before you can download anything from the store, you need to associate your AppleID with a store account, which needs to include payment information. You are only charged anything if or when you download a for fee content item or app for the first time (re-downloads of purchased content other than audiobooks is free, as many times as you wish).
Your account will be active within moments of setting it up in iTunes, and it will work as long as your AppleID is valid (so indefinately - mine has been actice since the iTunes store first opened).
Just for clarity - an AppleID by itself is just an identifier and is used to create accounts (and subsequently log in and use) a number of Apple services. You use an AppleID to create accounts for the iTunes and App stores, for using these forums, as well as services like iCloud, iMessage and so forth. The AppleID is just the identification used to create the accounts, but the service accounts need to be created before they can be used. So you need to use your AppleID to create an iTunes store account before you can start downloading content from the store.

My customized Yahoo Toolbar (v. 2.3.5.20110120033202) would not load properly after I installed the new Firefox 5.0, even though when it checked for incompatibilities while installing it made no mention of the Yahoo toolbar, only the Google toolbar

My elongated (statement) question fully explains the problem I am inquiring about. Only some rudimentary features of my existing Yahoo toolbar were displayed and it was missing all of my previously selected icons which are on file with Yahoo, not my computer. You also could not right or left click for a menu on the options icon (gear icon) to the right of the search window.
It would seem that there are incompatibility issues between the new 5.0 Firefox and the existing most current version of the Yahoo Toolbar add-on. I don't know know why this wasn't detected in the installation scan for compatibility of installed add-ons.
I have re-installed the 4.0 Firefox for the time being in order to regain the use of the Yahoo toolbar and all it's features which I use regularly.
Does anyone have any other suggestions as to what the problem may be?

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

New cartridge inserted, will not print, HPDeskjet F4580

Hi,
Deskjet F4580, inserted a new black cartridge, not printing, not even a test page.
Have an E in the quantity window , Flashing ! over black ink showing empty.
Initial info suggested a software problem, recommended uninstal and reinstal.
Did that, no change.
By the way how do I reset the Printer. I have a flashing orange light on extreem left.
Thanks.
Gerry.

Hi @GerryLavery ,
I see that you are having issues printing, after inserting a new black cartridge. I would like to help you out today.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Try these steps to see if it will resolve the issue.
Blinking Lights on the HP Deskjet F4580 and F4583 All-in-One Printers.
Troubleshooting Print-Quality Issues.
Disregard the title, this document provides information for cleaning the electrical contacts.
'Cartridge Problem', 'Incompatible Cartridge', or 'Cartridge Missing or Damaged' Message Displays fo...
I can send you the reset in a private message.
In the forum beside your handle name just click on the envelope to view it.
Are you using Genuine HP Cartridges?
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

To open iPad after lock while install new software

I was trying to update my iPad with new software iOS 8 however the iPad lock and now I facing a problem which I couldn't open it and stuck with black screen and apple sign appear on screen. My question what best solution to let it work again?
Ali.

Try reset iPad
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
Note: Data will not be affected.

Where is OK button after checking new cartridges while installing new printer

Similar Messages

Maybe you are looking for