Where to assign User Id to agent id in PO release strategy work flow

Hi Guys
I have on requirement
Where to assign User Id to agent id in PO release strategy work flow
Thanks in advance
SAP MM

Hi,
Check & follow the path:
SPRO-- > MM ---> Purchasing -> Purchase Order- > Release Procedure for Purchase Orders -
> Define Release Procedure for Purchase Orders -
> Workflow
Here against each release code assign  respective User ID's for Release Code
Regards,
Biju K

Similar Messages

  • User Exit for Purchase Requistion / Purchase Order Release Strategy

    Hi
    Can any one please tell me the List of User Exit / Enchancement Package for Purchase Requisition / Purchase Order Release Strategy .
    Thanks

    M06B0001                                                               
    Role determination for release of requisitions                         
    M06B0001                                                               
    Changes to communication structure for release of requisitions         
    M06B0005                                                               
    Changes to communication structure for overall release of purchase     
    requisitions                                                           
    M06E0004                                                               
    Changes to communication structure for release of purchasing document  
    M06E0005                                                               
    Role determination for release of purchasing documents

  • Sender Agreement - Assigned Users not work

    Hi Experts,
    I have a scenario SOAP - XI and I want to establish authorization to certain users. I am trying to assign user to the Sender Agreement but it does not work.
    I am using in the URL the next prefix /sap/xi/engine?type=entry, but if I use the prefix /XISOAPAdapter/MessageServlet, it works fine.
    Is it possible to assign users to Sender Agreement using the prefix /sap/xi/engine?type=entry?
    Thanks,

    Hi,
    There are two ways of sending a message to XI using SOAP Adapter. The first one is to the adapter engine via ./XISOAPAdapter/MessageServlet. The second one is to the integration engine via propose URL. The first one will use the sender agreement because it is considered a java call but the second one will not (same with PlainHTTPAdapter).
    Hope this helps,
    Mark

  • User Exit for getting Purchase Requisition Release Strategy

    Hi Experts,
    When a user creates a PR I need to know the user exit I need to implement so that the First Approver (Processor) text  in the Release Strategy is populated from a custom table. I have seen that the field is MEREL_S_GRID1-STEXT. I also need to know if I can implement a user exit so that it pulls the release strategy for a PR for assets (Acct Category A) since it is pulling for Acct Category K (Cost Centre) and the Release Strategy tab is appearing in this case.
    Kind Regards,
    Darlington

    Hi Meenakshi,
    Thanks for the very useful answer. It has given clues on how to resolve this issue. I have resolved this issue for the Asset item category using the following thread: user exit for requisition release strategy, and also SAP Note 365604.
    However, I have another issue, the release strategy for Stock Items, (item category blank) is not pulling through. I need to use the same method above but would like to know how it determines the funds centre for a specific stock item. I couldn't find where that is implemented in the material master and I need info on how to determine the account assignment for stock items based on the funds centre.
    Regards and Thanks.

  • Returning User Work Flow Urgent!!!

    We implemented OIM at our client side everything is working fine;
    The user creation happaens in the following.
    user manager fills the account request form OIM picks up this request once; creates the temp_userid; once the persons onboards his recorded enterend in SAP HR OIm picks up the the record and if the lastname and positioncode mathces oim links the record and create all other accounts. (AD,Exchange,OID etc)
    once the user end date comes OIM disables automatically. Our work flow is defined in such a way that if I want to enable the user I have to goto user -->resouces --> make sure all the reouces are diabled and I have to enable the Voice mail accont resouce first and goto user form change end date click enable button that will enable the user fine it is working.
    How do I do those manaul enable steps to enable user automatically based on SAP new end date.

    You could create a scheduled task that looks at this value and performs the actions based on the date to the other resources.
    You could create a trusted recon for that value to the user's OIM profile and either map it to the end date.
    -Kevin

  • Same number of work flow entries under "Approval" link for each user

    Hi All,
    We are implementing SRM 5.0 .
    The problem we are facing is that when we test the service BBPSTART , the number of work flow entries in the inbox for all users is same .
    We created a new user on SRM and tested BBPSTART with this user...it shows the same number of work flow entries in the inbox..
    What is the problem?
    Thanks & Regards,
    Anubhav

    Hi Masa,
    SPRO->SAP Reference IMG->Supplier Relationship Management->SRM Server->Cross-Application Basic Settings->SAP Business Workflow->Activate Standard Taks
    Activate Standard Tasks
    In this activity, you start a background report that defines certain tasks within the workflows of Enterprise Buyer as standard tasks. Any user can perform standard tasks, such as "Approve User Master Record". You use the workflow definition to narrow down who can actually perform the task. For example, in the case of approval of user master records, this depends on the organizational unit to which the new user master record belongs.
    You must perform this activity during the initialization of the Enterprise Buyer system, otherwise the SAP Business Workflow cannot determine who the approver should be.
    Is it somehow related to my problem?
    Regards,
    Anubhav

  • Workflow completing but not assigning to it all agent (multi line agent)

    therer is a scenario in my project where one workflow is created with multiline agents i.e. one workflow assigne to multi users but when i am completing this workflow using SAP_WAPI_WORKITEM_COMPLETE its not assining to defined multi agents in "lt_con table" of next step of workflow.
    as it is..
    CALL FUNCTION 'SAP_WAPI_WORKITEM_COMPLETE'
                EXPORTING
                  workitem_id      = iv_wf_id
                  actual_agent     = 'OWNER1'
                  language         = sy-langu
                IMPORTING
                  return_code      = return_code
                  new_status       = new_status
                TABLES
                  simple_container = lt_con.
    please tell me where i am missing  ?
    Edited by: ashu@sap on Aug 29, 2011 9:54 AM

    Hi,
      After reading all your posts as per my understanding.
    1. You said that you have a dialog work item inside a loop and this has to get approved by different people at each level and at each level there could be a possibility that there can be multiple agents. In your current case it is working fine for one single agent.
      First of all why are you trying to populate the agents in a separate multiline container element. Why am I saying this is because when workflow already provides the technique to handle this kind of situation  by creating RULES and assign it to the dialog work item to determine the agents . If you would have created a rule to determine the agents based on the each level irrespective of the number of agents determined by the rule the work item will be sent to all the respective agents inbox.
    So create a RULE in such a way that based on the loop iteration or level it should determine the agent and assign this rule to the dialog task.
    2.  If am not wrong you might be using some kind of dynpro application so that is the reason you are trying to complete the work item by making use of function module. Clear me that is the user completing the work item from SAP inbox or UWL. also clear that is the task is a decision task or simple foreground task.
    If the task is a decision task then make use of the function module SAP_WAPi_DECISION_COMPLETE. if the user is executing the work item from sap inbox then there is no necessary of completing the work item. system will take care of other things.
    3. Finally You say that the work item is still appearing in the executed users inbox.
    This could be possibly because of the way you are trying to complete the work item. So to overcome this error you need to redesign your workflow by adding RULE to the dialog task. Then you wont find any issues.
    Please do not populate all level agents at one go. determine agent at each iteration of the loop independently.
    Regards
    Pavan

  • How to assign agent assigment in release strategy WS20000075?

    I have copied  the standard workflow WS20000075 and then created Workflow template and in trigering events tab of the wf template, I have binded the event RELEASESTEPCREATED.I have also done the SPRO settings for release strategy,i.e,that is I have assigned the users for each release code in table T16FW and mentioned the role resolution in the as 1 in the table T16FC.
    The workflow is working fine but I am a bit confused with the agent assigment in the tasks TS20000166 and TS20000168.I have noticed one thing that in the task TS20000166 a default rule 20000027 - Person responsible for PO release,but it does not seem to work.The TS20000168 does not has any default rule for agent.
    Can anyone guide me how i can do the agent assignment for this workflow.
    Message was edited by:
            Babar Haroon

    There is no requirement for default rules.
    Agent for task TS20000168 is assigned in the workflow where it is used.
    If the default rule for task TS20000166 does not seem to work you should first of all check all the obvious potential problems, and secondly (if you haven't found out what the problem is) tell us <u>why</u> you have concluded that it does not work.
    Check:
    1) that the task has either been defined as general task or has possible agents assigned
    2) that your customizing for the release code has "1" as workflow configuration and that there is a valid agent assignment for the code - alternatively "9" as config and the user exit is implemented
    3) that there is overlap between agent assignment for the release code and possible agents for the task

  • Problems with assigning user to Purchase Group

    Hi all!
    I'm trying to set-up standard workflow WS 20000397 - Handling invoices blocked due to price.
    Somehow I left something out as nothing is sent to my inbox when a invoice is blocked.
    It starts fine but it can't find and agent when I check the log.
    I've created an org. structure with a company, that has one organizational unit under it.
    To this I've assigned a position and thereafter a user to this with my user ID.
    Then I've created an assignment in PFOM whera I assigned SO T024 001 (Purch. Group 1) to my newly created Position.
    I have found Purch group 001 using F4 so no mispellings could be the case.
    In the container I can see that it has found the correct purchasing group (001) with my created position (the S-code for the position is even shown as an agent in the container)
    Any suggestions would be appreciated.
    Regards,
    //Roland
    Edited by: Roland Persson-Aglert on Dec 4, 2008 5:03 PM

    Hi!
    I'll paste the message below, I although found out that I had checked wrong TS, so I checked TS20000661 in PFTC and is set to "General forwarding allowed".
    No agents found for this task -> long text
    Message no. WO590
    Diagnosis
    The system could not establish any agents for the task underlying this work item.
    The key of the task is: TS20000661
    The key of the work item is: 000000404120
    System Response
    The system cannot assign work item 000000404120 to any agents - the work item does not appear in anyone's Business Workplace.
    Procedure
    Assign possible agents to task TS20000661 or declare the task as a general task.
    Refer to your workflow system administrator.
    //Roland

  • Assign User Profiles and Web Interface Transactions to Users

    Hi EM Gurus,
    Has anyone worked with not standard scenarios in SCEM?
    They are working well but I can't access them on interface web.
    In selection page (search page after logon), where choose tracking scenarios, only standard scenarios appear although I have assigned both scenarios to the user and made same configuration; Assigned and Defined Web Interface Transactions, Configured Fields for User Profiles, Defined User Profiles, Assigned User Profiles and Web Interface Transactions to Users.
    But only Standard Scenarios appear as choice of tracking scenarios that are displayed to the user as a dropdown box on the selection screen after logging on to the Web interface.
    Has anyone accessed not standard scenarios on interface web??
    Help, please!
    Thanks a lot.
    Rodrigo Freitas

    Hello Rodrigo,
    if you have assigned the scenarios to your user in transaction /SAPTRX/UCUSER you must go to the admin page and reload the profile manager.
    /admin in the URL of the WCL instead /ehsearch.
    Afterwards you should see them also in the drop-down box.
    Best regards,
    Steffen

  • Assigning User Exit for Substitution type 003 - OBBH

    Hi Gurus,
    I have created a Sustitution for the complete document i.e type 003 for replacing Assingment Field with PO number during MIRO.
    I have copied the standard program RGGB000 in to Z.. add my user eixt and have written the code. But i dont know how and where to assign the user exit that i hav created.
    Could anyone please help on this...
    Thanks in advance.
    Raj.

    Hi,
    It's done via GCX2 transaction. Please, consult note 842318 for further info.
    Regards,
    Eli

  • Assign users to virtual organisations?

    Hi,
    I'm new to IDM and trying to work out how to use it effectively.
    I have an LDAP directory with I've made a directory junction to to create virtual organisations mirroring the directory structure.
    However, when I import users from resource they all go into the Top organization and do not appear under the virtual organization.
    how can I fix this? I read somewhere that the Identity Template is used to assign users to organizations? Assuming I have mapped attributes to mail, ou and ouid is the following Identity template correct?
    mail=${mail},ou=${ou},ouid=${ouid},dc=example,dc=comOr am I missing something entirely?
    thanks for your help,
    Toby.

    You need to create a form and assign it to the reconciliation process. In the form, you need waveset.organization set to where you want the user objects placed. By default, waveset.organization is set to just "Top". You can get the DN, parse it into a list and write the xml code to use the list to place each in a different virtual organization.
    Start off simple, say create a container called Top:newusers. Take a copy of Empty Form and save it as orgEmpty Form or something. Define a field waveset.organization and just set its value to "Top:newusers". Then in the resource, set the reconciliation form to your new form.
    Try this, once you see new ids show up in Top:newusers, you then can enhance the logic to be more sophisticated in placing objects. That is, parse the DN into a list and walk the list for a IDM waveset.organization value.
    BTW, a good question to ask prospective IDM so called experts. Of 8 or so, I only met one that new how to do this efficiently.

  • How to assign Users to process roles?

    Hi All,
    I have designed a process and I have consolidated all the roles,
    when I intiate the process from the runtime workset it asks to assign users to these roles(I have consolidated all the roles to three mail roles). The problem that I am facing is that the user should not see this screen, depending upon the user login id the approvers should be automatically assigned to the respective roles.
    Is this possible...
    Kindly guide me
    Thanks in Advance
    Sivaprasath

    Hi Sivaprasath,
    assuming that I've got you wright you could try to model the following using the callable object "business logic" and the callable object "assign user to process role".
    With the help of the first CO you can implement the logic to assign the respective approvers to the users (initiator) and let the processflow go on directing it to the appropriate step where the above mentioned second CO assigns the user to the process role (using the result states of the bussiness logic CO)
    At least you are supposed to need an appropriate Parameter that you can consolidate with the User ID.
    Just a quick idea, hope this will work with you.
    Greetings
    Berndt

  • Automatically assign user roles on user creation

    Hi,
    I have a scenario where i am creating database users in Oracle database and we need that no matter from where the database users are created they have a couple of roles automatically assigned to them.
    How can this be done?
    Quick response will be very helpful.
    UZ

    post and wait for a valid answer more than 20 minutes, search by yourself at oracle documentation less than 5 minutes. worth it?
    http://docs.oracle.com/cd/B28359_01/server.111/b28286/statements_8003.htm
    a trick --> group of roles = profile
    another trick --> profile can be add in the user creation
    Edited by: Fran on 26-feb-2013 2:17

  • CUPS - Shortcut to assigning users with lines?

    Is there any bulk way to assign users to the line apperances of the user's phone in CallManager?  I need to do this for Presence, but it's a very manual task.  I've tried exporting the phones, but I don't see anywhere in the export where it shows the user/dn assocation.  To be clear, I'm not talking about device association in the end user account, I'm speaking of the end user associated with the DN on the phone (all the way at the bottom of the DN configuration page).

    Hi
    See this previous post:
    https://supportforums.cisco.com/message/3043177#3043177
    Please rate helpful posts...
    Aaron

Maybe you are looking for