Windows 7 Does Not Respond after it goes to sleep

We are using Windows 7 image distribution through SCCM for our entire organization. Lately, I came across this issue, now becoming more common on all
the systems. The computer won't wake up from sleep by pressing any key, if left unattended for more that 30 Mins (rather after it goes to sleep). A forced Restart is then necessary to return everything to normal. We are using Dell Latitude E series laptops,
as a standard all throughout our organization.
Already tried lot of option like - upgrading the drivers, changing the power plans etc. However, neither of them worked. Any suggestions in this regard
are highly appreciated.
Thanks,
Sam

These type of issues can be solved by performing a startup repair.
http://windows.microsoft.com/is-is/windows7/products/features/startup-repair
additionally this may be helpful
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01853693
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/windows-7-your-computer-cannot-come-out-of/20ffb7a3-7f0c-46f9-8516-c1e31b11e558
Hetti Arachchige V Aravinda | Network & System Administrator (B.Sc, Microsoft Small Business Specialist, MCP, MCTS, MCSA, MCSE,MCITP, CCNA, CEH, MBCS)

Similar Messages

W510 eSATA/USB2.0 combo port does not respond after waking up from sleep mode

Has anyone tried to connect external DVD/CD player or burner to the eSATA/USB combo port and experienced very slow system performance after waking up from sleep mode? It might takes minutes to launch an application program that usually takes just few seconds. My W510 can not even restart. It will just stop at the Thinkpad logo if I tried to restart after waking up from sleep.
The funny thing is if I moved the external DVD/CD player to the USB2.0 port in the back, everything went back to normal. I don't know if this has anything to do with the fact that the combo port has something to do with eSATA.
Thanks

It seems that this problem is unique to my system. I am hoping that one of the Mac Guru's will have at least a pointer in the right direction.
Thanks.

My Adobe acrobat X Pro does not respond after a minute I open up a pdf file

I recently have installed Adobe Master Suite CS6 Collection. My Adobe acrobat X Pro does not respond after a minute I open up a pdf file. This happens every time when open a new pdf file. My operating system is Windows 7 pro ( Lenovo-64 bits). Any suggestions would be appreciated !!

Mylenium
Thank you for the suggestions.
I checked the WIndows log files. It reported the following error:
The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 4770
Start Time: 01d0079a09bba381
Termination Time: 13
Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
Thank you.

Finder DOES NOT Respond after Restart, Or Shut Down

I am running an iMac G5 on OS X 10.5.4, After a shut down or restart, Finder does not respond, The only thing on my desktop is My HD and Chosen wallpaper. I can launch Apps from the Dock, but not folders from the dock, Not Downloads folder, Documents Folder, Just Applications, which is weird because they are in finder too! Mail starts up when I log in so I can access Mail, I use Firefox, When I click on it in the dock it starts up no problem, after a while Finder does respond, I get all my icons back on my desktop and can access folders. I have Cleared System Cache, Browsers Cache, I ran Disk Utility and REPAIRED Disk permissions. No help. Short of RE-Installing Mac OS X, What Should I do? Is this happening to anyone else??

I am having the same problem!
I have tried the following: deleting the com.apple.finder.plist, deleting the com.apple.sidebar.plist, I have reinstalled the 10.5.5combo update, I have deleted all of my photoshop preferences (possible solution from another thread), and it is still doing it!

Satellite A65 freezes and does not respond after adding of RAM

Gents,
My laptop Satellite A-65 has been upgrade from 512 MB RAM to 1024 RAM. It recognized additional memory without any problem (as it should be according to manual).
But unfortunately after 1 day it begun suddenly stops, pictures on screen freezes, laptop does not respond at all - only reset (pushing and holding power button) can help. some times laptop is able to work 2 or 3 hours, but then again stops.
Memory place cover is rather hot, fan very often work uninterruptibly. so i can't decide whether problem is in new memory card or not enough cooling or might be in changing of BIOS version (or BIOS setttings) and might be memory becomes full and does not clear itself properly (last remark was found on some forumes).
Experts, help to find exact reason especcially if u had similar problem.

Hi
Im not expert but I would recommend removing the new memory module and let run the notebook only with the standard memory module.
If the notebook will not hang and will not freeze then its a very clear case for me.
Either the second module is not compatible or faulty.
In my opinion you should use branded modules like Kingston for example. The quality is much better as a no-name module.
Additional use the modules recommend by Toshiba

Canon LiDE 100 does not respond after wake from sleep

I have a Canon LiDE 100 flatbed scanner. I constantly put my iMac to sleep and only ever shut it down once every few weeks.
When the computer wakes from sleep the scanner does not respond. Image Capture lists the scanner in the device list but reports the following error;
"An error occurred whilst communicating with the scanner"
I have to unplug the USB cable and plug it back in for it to work (or restart the computer, both always work).
Since I only moved to the Macintosh in July I have no idea how to uninstall drivers to give myself a fresh start and the scanner does not come with an uninstall utility.
Any suggestions on how to fix this little problem?
Thanks.

I am going to respond to my self and say I am nuts.
Canon does not seem to have any uninstaller for this scanner on their site:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDet ailTabAct&fcategoryid=351&modelid=17104
Which is rather odd since they have installers. this is different from most of their other older scanners. But if you just plugged in our scanner and things worked in OSX, which it should have, then you should be OK.
However I can confirm that others see this issue (like my dad) and here is the official Canon response to the issue:
+Dear XXXX:+
+In some cases, coming out of sleep mode may not properly reinitialize+
+the USB bus on Macintosh Operating Systems. Unfortunately, the only+
+work around when this happens is to restart the computer.+
Of course this in not exactly true as logging out and back in fixes it.

User does not respond-after reading countless post i still don't understand

hi. i have been reading post on the 'user does not respond' and i still do not understand. i don't know how to check my ports and how to change them. all of them have been pretty technical. please, is there anyone that can explain it in layman's term?
2006-09-17 07:57:14 -0400: sentosa225 did not respond.
Tried to send UDP SIP "invite" to the following IP addresses and ports:
218.111.157.122:5060, 169.254.186.77:5060, 192.168.1.8:5060
that is what i get. i read and saw that 5060 is the correct port, is it?
can anyone please help me. there seem to be no end to this.

Hi Mark,I think I'll have to brush up my english first of all.Or think about how to put it,so that you can understand my abstract question.I tried to find a site of Adobe support in Dutch because that may be easier for me and for others to understand,because everything computer related is so new to me,that my questions are not very clear most of the time.But I can't find support in my language,so I will try and think a bit more how to answer your questions to my question.Bye.Marion

Request to Mods. re: Yoga Tablet pro 2 not wakeable after it goes to sleep

We have a number of posts regarding the Yoga Tablet Pro 2 going to sleep and not waking up. Can we get some kind of confirmation that this is actively being worked on or passed along? I feel most of us have tried to do a factory reset, for some it's worked for a time, others (such as myself) this has not worked at all. It is not a battery issue because when you hard power off the device and repower it back on, the battery still shows maybe a few percent less than when the device went to sleep.
I do know this is frustrating me and I'm tempted to walk away from this tablet for that reason.
Perhaps we can get a confirmation that this has been passed up the chain or any kind of other "official" recommendations to try. It's not fun having to come back to my tablet after it goes to sleep and having to hard power it off and then repower it back on - every 5th or 6th time.
Thank you,
Dan

I am bumping this. I'd like to see one thread or a sticky on this topic. There are too many threads on this issue and some of us are repeating the same information. I'd also like to know if any work is being done by Lenovo on this issue. The Factory reset seemed to work for a 2 weeks and now my tablet is back to sleeping and not waking.
If someone stumbles on this, the North American Number for Lenovo Tech Support is:
877-453-8686
If you call, Remind them that the Factory reset does not work.
Dont forget to be courteous!

Grey Window - Does not open after Running a Form

Hello!
I have the following problem:
I just installed Oracle 9i-Developer Suite.
After installing it, I wanted to run a form (also made in Forms 9i).
So, I selected one form , connected to the database and Run it.
The first time, a dialog appeared informing me i need to instal Jinitiator1.3.1.9.
So, I installed JInitiator and Run the form again.
The result is that it does not open. It seems to be blocked.A grey window apppears and that is all. After some minutes (about 30 minutes after), 2 error messages appear:
1.FRM-92101 : A Failure has occured on the Server. you will need to reestablish your session.
2.FRM-92050 : Failed to connect to the Server. /forms 90/190servlet -1
Please tell me what to do next to run this form (or any other form).
If an aplication is runned, and it uses Jinitiator 1.3.1.13 everything seems to be ok.

If you are getting the applet background (usually gray or tan colored), it means the http listener (oc4j) is likely already running. This is confirmed by the request to install jinitiator. If the listener was not running, neither of these events would occur.
Before going to far, I have to ask.... do you know how old 9i is? Also, "9i" could possibly be one of two versions 9iR1 = Forms 6.0.8 and 9iR2 = Forms 9.0.2. Both of these versions were desupported long ago. This is important to know for several reasons.
1. Even if you actually have a valid support contract with Oracle, they will not be able to offer much assistance as Support is not able to report new bugs against these versions and in some cases, can no longer refer you to documentation as some of it has already been obsoleted.
2. Because these versions are so old, they will not likely run on newer operating systems. For example if you are using Vista, Win7, Win2008, etc, Jinitiator will not run on these platforms. Since neither of these Forms versions was certified for use with any of the JRE versions that were supported on these newer operating systems, the only solution that makes sense would be to upgrade the Forms version.
Apparently, you partially see the problem as you indicated that it works when using JInit 1.3.1.13. Even this version is very old. In general, Jinitiator is no longer supported either, but the latest and last version is 1.3.1.30. So you can see that the latest version is many releases newer than .13. If you are not using one of the platforms I mentioned above, you may have more luck with a newer jinit version. You can download 1.3.1.30 from MyOracleSupport using Patch ID 7410076. If you do not have access to MOS, you may be temporarily out of luck as these files are currently not available on OTN although may return once the recent migration has been completed.
Regarding the errors you noted:
FRM-92101 generally indicates that the runtime (ifweb90.exe) was not able to start or crashed after it was started.
FRM-92050 generally means there was a problem with the url or the related session ID or header info. This can occur if your machine is not properly configured in DNS, as well as many other possible causes. Assuming you are using the Forms Builder to run your forms, try changing the url from the host name to "localhost". In other words:
http://localhost:<port number>/forms90/f90servlet
Regardless, upgrading will be you first best action.

FaceTime window does not appear after startup

After I startup FaceTime, the window for it does not appear, but the toolbar is available.
The options under 'Edit' and 'Video' are all greyed out, but the options under the 'FaceTime' tab are all available.
However, when I try to access 'Preferences' for FaceTime, a black screen appears. When I press the red button to close the Preferences window, FaceTime will automatically quit.
Help please!

Firefox does not have a run for .exe which is a good thing for security and common sense reasons.
After you download Firefox you go to where you save the file and run it.

Wiki does not respond after a few days

Hi,
I have set up the wiki server on a newly bought mac mini (winter 2011) running latest version of Snow Leopard. Authentication is performed through remote Open Directory and Active Directory servers. No third party software installed.
Everything works just fine for a few days (1-2 weeks), but then the server starts to respond VERY slowly. This looked like a memory problem to me (busy processor, low ram, etc), but a quick look at the Activity Monitor shows me nothing's wrong there.
I can reboot and it will go on for another few days, but I wonder if this does not hide another problem.
I'm pretty sure this is a wiki related issue, because we have identical machines, but the ones without web services run smoothly without need for an occasional reboot. Also, I did many fresh install, and the problem always came back.
Anyone has experienced something similar?

This is quite a common problem. The usual cause is inadvertent use of the "mute speech" command via the Trackpad Commander.
To toggle VO speech on and off using the Trackpad, tap twice with three fingers simultaneously.
Otherwise, you can summon up the VoiceOver command menu using VO-H-H, type "PAR" (French for "SPEech" and press Return.
For the Zoom problem, open System Preferences —> Universal Access and make sure you tick the "Zoom follows the keyboard focus" checkbox.
You might also want to experiment with the Screen Image radio buttons lower down the window:
• Continuously with pointer (some people find this makes them seasick);
• Only when the pointer reaches an edge (usually preferred); and
• So the pointer is at or near the center of the image (some people like this).
Have you thought of looking at the French language website http://cecimac.org/ ? It's full of articles and tips for beginners, all in French. There is also a very lively e-mail Forum for Francophone VoiceOver users.
Good luck,
Archie

My ipad 2 does not respond after upgrade to ios 8

I tried to upgrade my Ipad 2 to ios 8, which has been said to be copatible. During the upgrade process the Apple logo apeared on the black screen and has stayed there everysince. The ipad does not react on a hard reset and is not identified on connecting to a computer, Apple or PC. Screen stays on untill the battery has been emptied. Apple Store in Munich could not help me and told me guarantee has run out, there is nothing they can do, than to offer me a new Ipad 2 for 200 €. I can not understand, that an upgrade can "destroy" my property.

I had a problem connecting to my exchange server. It turns out that Exchange will only allow ten devices to be partnered to your account at a time. Apparently I have a problem with new phone.(Attending the 12 step program now for treatment.) I had this message in my inbox when I logged in to check the server. "You have 10 phone partnerships out of the maximum allowed 10 partnerships. After you reach the maximum, you can't create additional partnerships until you delete existing ones from your account. To do so, sign in to Outlook Web App, click Options > Phone > Mobile Phones, and delete any unused partnerships." I followed the instructions and delted all the old accounts...problem solved.

Report Server does not respond after certain idle time

We have an oracle 10g application server on solaris 10.
The report server has the defaul settings for time out , callback etc..
After the report server stays idle for 2 or 3 hours and the first report that comes after that takes around 8 to 10 minutes to generate. The report server engine does not seem to be getting active immediately.
Is there any parameter I can change so that the reports do not get effected.
Thanks

I have put the idle time out at 300 minutes and the max idle time as 350 minutes. But that does not seem to have helped.And also I have min engine as 1 , max as 10.
Even with the above settings , When the report engine is idle after 30 minutes the 1st report to generate after 30 minutes takes 9 minutes.
please let me know if there are any other parameters I need to change.
thanks

8.1SP2 Webserver does not respond after a while

Hello,
I've had this happen several times. Nothing in the logs shows anything
strange. It logs the HTTP requests coming in, but does not return a
response.
The process is still running, and the applications can connect to the
port, but they hang on waiting for a response.
My setup:
Redhat Linux 9 w/ Weblogic Server 8.1 SP2
I'm trying to connect to the /console app, but have also tried to access
the / directory to make sure it wasn't just the console that was hung.
Thanks

Mylenium
Thank you for the suggestions.
I checked the WIndows log files. It reported the following error:
The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 4770
Start Time: 01d0079a09bba381
Termination Time: 13
Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
Thank you.

ANYTHING I DO I GET EROR ' WINDOWS DOES NOT RESPOND'. HOW TO RESOLVE?.

I HAVE A HP PAVILION DV7 NOTEBOOK PC W/WIN 7 SP1 64 BIT. I HAVE A BASE LINE ANALYZER 2.3, BUT NO USE.
I GET SAME ERROR ON ANYTHING LIKE OPENING A FILE, ETC. I HAVE FIREFOX NOT IE11. IE11 IS WORSE & SO IS
GOOGLE CHROME. FIREFOX IS BEST OF ALL. I WASTE A LOT TIME WAITNG FOR RESPONSE. PLS. HELP. THX.

Hello KRIS GOPINATH,
Even in the safe mode and clean boot, you still get everything like antimalwareis not responding?
Have you made any changes before this issue?
Please open the event viewer and check if there are any related error log. For more information about the event log, please refer to the following article.
http://windows.microsoft.com/en-us/windows/open-event-viewer#1TC=windows-7
Please refer to the following article to use the last known good configuration.
http://windows.microsoft.com/en-hk/windows/using-last-known-good-configuration#1TC=windows-7
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Windows 7 Does Not Respond after it goes to sleep

Similar Messages

Maybe you are looking for