Windows Server 2008 R2: Different file associations when double-clicking vs. right-click - open
I have a basic .xml file on my Windows 2008 R2 desktop. I have set the file association for .xml files to Adobe FrameMaker 12. When I double-click the .xml file, it opens with FrameMaker. When I right-click -> open the .xml file, it opens with Notepad.
I need the .xml file to always open with FrameMaker, even when I use right-click -> open. How can I set this up for all users on a Windows 2008 R2 server?
Thank you!
-Nicole
Hi Nicole,
Thank you for posting in Windows Server Forum.
When you double-click on a file in Windows explorer, the Windows shell looks up the extension of the file in the registry to see if the extension is registered. If the extension is not registered, Windows displays the Open With dialog box, allowing the
user to choose an application to associate with the file type. If the extension is registered, Windows calls the ShellExecute() function with a command of "open." It also passes the name of the file that was double-clicked as a command line parameter.
Associations go further than simply opening a file, though. If you right-click on a text file (.TXT) in Explorer you will see two items at the top of the context menu. The first is named Open. Choosing this menu item is the same as double-clicking the
file in Explorer. When you choose Open, NOTEPAD.EXE will be started with the selected file loaded (assuming a default Windows installation). The second menu item is called Print. Clicking this menu item will cause the file to be printed without displaying
Notepad at all.
There is some registry setting for the application association to take place, you can edit them under following path.
HKEY_CLASSES_ROOT\Test App File
(Quoted from below article)
More information:
Using file associations
Hope it helps!
Thanks.
Dharmesh Solanki
Similar Messages
-
Windows Server 2008 R2 Does not boot When Back up drive removed
I have a windows Server 2008 R2 Standard server RAID 10 installed. I have a non raid drive installed as the backup HD. The Backup drive is now failing. When I went to switch it with a new one the system does not boot and is asking for
a boot drive. I have been searching for solutions and cannot find any. Any ideas?Hi,
Could you confirm if your boot volume is on that non-RAID disk (maybe 2 volumes on that disk and one of them is the boot volume)?
At current situation, first please test to connect the failed disk back to the device and see if it will help.
Or you may need to run a boot-up repair with an installation disk.
If you have any feedback on our support, please send to [email protected] -
Windows server 2008 R2 Access files from anywhere
I want to make windows server 2008 R2 access from anywhere. I will install window server. It will basically be a file server and I want to access it from anywhere. Can you provide some steps that should be done . there is need to have a public IP or without
public IP it can be done?
Thanks in advance.Hi
You will need to have a public IP Natted to your internal IP. be aware you dont want to expose this server too much to the internet, make sure you only have your ISP open certain ports on the firewall or if you are hosting your own TMG server for example
publish it through there.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Hello !
I have a server with Windows Server 2008 R2 (AD, File Server, DNS Server and DHCP Server) that not access network share other Domain Controller.
Well, is very crazy.
I view network shares by network computers and devices,
but not \\domain_controller or \\IP_domain_controller.
I execute ping for succeed for all servers.
Follow error bellow:irectory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine SRVMTZDC01, is a Directory Server.
Home Server = SRVMTZDC01
* Connecting to directory service on server SRVMTZDC01.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=shcorp,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=SAO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=CWB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=POA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=RIO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=VIX,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=SSA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=FOR,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=BHZ,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=BSB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=RCF,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=BEL,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=shcorp,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC05,CN=Servers,CN=SAO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC06,CN=Servers,CN=CWB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC13,CN=Servers,CN=POA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC07,CN=Servers,CN=RIO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC08,CN=Servers,CN=VIX,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC09,CN=Servers,CN=SSA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC12,CN=Servers,CN=FOR,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC04,CN=Servers,CN=BHZ,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC10,CN=Servers,CN=BSB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVRCFDC11,CN=Servers,CN=RCF,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 12 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\SRVMTZDC01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... SRVMTZDC01 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\SRVMTZDC01
Starting test: Advertising
The DC SRVMTZDC01 is advertising itself as a DC and having a DS.
The DC SRVMTZDC01 is advertising as an LDAP server
The DC SRVMTZDC01 is advertising as having a writeable directory
The DC SRVMTZDC01 is advertising as a Key Distribution Center
Warning: SRVMTZDC01 is not advertising as a time server.
The DS SRVMTZDC01 is advertising as a GC.
......................... SRVMTZDC01 failed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... SRVMTZDC01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... SRVMTZDC01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... SRVMTZDC01 passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... SRVMTZDC01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role Domain Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role PDC Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role Rid Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
......................... SRVMTZDC01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC SRVMTZDC01 on DC SRVMTZDC01.
* SPN found :LDAP/SRVMTZDC01.shcorp.local/shcorp.local
* SPN found :LDAP/SRVMTZDC01.shcorp.local
* SPN found :LDAP/SRVMTZDC01
* SPN found :LDAP/SRVMTZDC01.shcorp.local/SHCORP
* SPN found :LDAP/9956d321-332f-482c-855c-8bceee885bb6._msdcs.shcorp.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/9956d321-332f-482c-855c-8bceee885bb6/shcorp.local
* SPN found :HOST/SRVMTZDC01.shcorp.local/shcorp.local
* SPN found :HOST/SRVMTZDC01.shcorp.local
* SPN found :HOST/SRVMTZDC01
* SPN found :HOST/SRVMTZDC01.shcorp.local/SHCORP
* SPN found :GC/SRVMTZDC01.shcorp.local/shcorp.local
......................... SRVMTZDC01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC SRVMTZDC01.
* Security Permissions Check for
DC=ForestDnsZones,DC=shcorp,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=shcorp,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=shcorp,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=shcorp,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=shcorp,DC=local
(Domain,Version 3)
......................... SRVMTZDC01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\SRVMTZDC01\netlogon
Verified share \\SRVMTZDC01\sysvol
......................... SRVMTZDC01 passed test NetLogons
Starting test: ObjectsReplicated
SRVMTZDC01 is in domain DC=shcorp,DC=local
Checking for CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local in domain DC=shcorp,DC=local on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local in domain CN=Configuration,DC=shcorp,DC=local on 1 servers
Object is up-to-date on all servers.
......................... SRVMTZDC01 passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... SRVMTZDC01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 14100 to 1073741823
* SRVDC01.shcorp.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 11600 to 12099
* rIDPreviousAllocationPool is 11600 to 12099
* rIDNextRID: 11737
......................... SRVMTZDC01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... SRVMTZDC01 passed test Services
Starting test: SystemLog
* The System Event log test
An error event occurred. EventID: 0x00000422
Time Generated: 05/02/2014 12:55:01
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\shcorp.local\SysVol\shcorp.local\Policies\{1A69D491-B88A-4F66-B294-4ABEC8C62886}\gpt.ini from a domain controller and was not successful. Group
Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An error event occurred. EventID: 0x00000422
Time Generated: 05/02/2014 13:11:54
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\shcorp.local\SysVol\shcorp.local\Policies\{1A69D491-B88A-4F66-B294-4ABEC8C62886}\gpt.ini from a domain controller and was not successful. Group
Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
A warning event occurred. EventID: 0x80001083
Time Generated: 05/02/2014 13:18:00
Event String:
TCP/IP failed to establish an outgoing connection because the selected local endpoint was recently used to connect to the same remote endpoint. This error typically occurs when outgoing connections are opened and closed
at a high rate, causing all available local ports to be used and forcing TCP/IP to reuse a local port for an outgoing connection. To minimize the risk of data corruption, the TCP/IP standard requires a minimum time period to elapse between successive connections
from a given local endpoint to a given remote endpoint.
An error event occurred. EventID: 0xC0002719
Time Generated: 05/02/2014 13:20:41
Event String:
DCOM was unable to communicate with the computer 8.8.4.4 using any of the configured protocols.
An error event occurred. EventID: 0xC0002719
Time Generated: 05/02/2014 13:21:03
Event String:
DCOM was unable to communicate with the computer 8.8.8.8 using any of the configured protocols.
......................... SRVMTZDC01 failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local and backlink on
CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
are correct.
The system object reference (serverReferenceBL)
CN=SRVMTZDC01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=shcorp,DC=local
and backlink on
CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=SRVMTZDC01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=shcorp,DC=local
and backlink on CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local
are correct.
......................... SRVMTZDC01 passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : shcorp
Starting test: CheckSDRefDom
......................... shcorp passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... shcorp passed test CrossRefValidation
Running enterprise tests on : shcorp.local
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\SRVMTZDC01.shcorp.local
Locator Flags: 0xe00031bc
PDC Name: \\SRVDC01.shcorp.local
Locator Flags: 0xe00033fd
Time Server Name: \\SRVDC01.shcorp.local
Locator Flags: 0xe00033fd
Preferred Time Server Name: \\SRVDC01.shcorp.local
Locator Flags: 0xe00033fd
KDC Name: \\SRVMTZDC01.shcorp.local
Locator Flags: 0xe00031bc
......................... shcorp.local passed test LocatorCheck
Starting test: Intersite
Skipping site SAO, this site is outside the scope provided by the
command line arguments provided.
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
Skipping site CWB, this site is outside the scope provided by the
command line arguments provided.
Skipping site POA, this site is outside the scope provided by the
command line arguments provided.
Skipping site RIO, this site is outside the scope provided by the
command line arguments provided.
Skipping site VIX, this site is outside the scope provided by the
command line arguments provided.
Skipping site SSA, this site is outside the scope provided by the
command line arguments provided.
Skipping site FOR, this site is outside the scope provided by the
command line arguments provided.
Skipping site BHZ, this site is outside the scope provided by the
command line arguments provided.
Skipping site BSB, this site is outside the scope provided by the
command line arguments provided.
Skipping site RCF, this site is outside the scope provided by the
command line arguments provided.
Skipping site BEL, this site is outside the scope provided by the
command line arguments provided.
......................... shcorp.local passed test Intersite -
Can I install Solution Manager 7.0 in Window Server 2008 R2 Enterprise ed.?
Hi, SDN experts.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2?
I checked the the software requirement for SAP Solution Manager 7.0, it only mentioned Window Server 2003 and 2008 enterprise edition.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2 enterprise edition?
When I ran the Solution Manager Master Installer, the Pre-requisite Checker gave a warning message saying that it detected incompatible server version, that the server version is Windows NT 6.1 (Build 7601: Service Pack 1) (I guess it meant Window Server 2008 R2).
=======
The following Windows operating system version is supported: Windows Server 2003 (i.e. Version 5.2) and Windows Server 2008 (i.e. Version 6.0).
Current Windows version: Version 6.1, Service Pack 1.0, productive type: Server.
You can check the current version of you operating system by runningu2026u2026..
========
Can I actually install Solution Manager 7.0 in Window Server 2008 R2? Will this cause problem during the installation/post-installation if I ignore this message?
Thanks,
KCHi,
I think it is not straight forward to install SAP Solution Manager 7.0 in MS Window Server 2008 R2.
I am installing Solution Manager 7.0 , the installation encountered error on Create Java Users step (Phase 31 of 44). When I login to SAP solution Manager system through SAP GUI. I encountered this error:
"OS release Windows NT 6.1 7601 Service Pack 1 4x AMD64 Level 6 (Mod 44 Step 2) is not supported with this kernel (700)'
I found that it is because I am installing SAP Solution Manger 7.0 in MS Window Server 2008 R2, which the existing kernel version does not support.
Do you know which kernel I should install?
I browsed in:
SAP Application Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 7.0" Entry by Component" Solution Manager ABAP Stack
SAP KERNEL 7.00 64-BIT UNICODE --> Windows Server on x64 64bit -->MS SQL SERVER
I downloaded:
SAPEXEDB_291-20001361.SAR Kernel Part II (for Basis 7.00) 291
Is this the right Kernel patch I should use?
If it is the right kernel patch file, how do I apply the latest kernel to existing Solution Manager system? Can you give me some guidance on this?
Thanks,
KC -
Unable to dual boot Windows Server 2008 On My new HP laptop
Hello,
I have recently purchased a laptop from HP Site. Here are the specifications of my laptop.
OS : Windows 8.1
HP ENVY 17T
4710HQ PROCESSOR
16GB RAM
I have created a new NTFS Partition and I am trying to install WINDOWS SERVER 2008 from setup file from my hard disk.Hi:
Yes, the drive controller in your notebook is set to AHCI, not RAID.
Here are the AHCI drivers in the setup information file I posted above...They are in the iaAHCIC file...
PCI\VEN_8086&DEV_8C03&CC_0106.DeviceDesc = "Intel(R) 8 Series Chipset Family SATA AHCI Controller"
PCI\VEN_8086&DEV_9C03&CC_0106.DeviceDesc = "Intel(R) 8 Series Chipset Family SATA AHCI Controller"
You need to select the driver that matches the hardware ID for the specific Intel(R) 8 Series Chipset Family SATA AHCI Controller your model has.
It either has the 8C03 controller or the 9C03 controller.
You can find the hardware ID for the specific controller your notebook has by clicking on the Intel(R) 8 Series Chipset Family SATA AHCI Controller.
The click on the Details tab at the top of the Intel(R) 8 Series Chipset Family SATA AHCI Controller window.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that and select the third item (Hardware ID's). Now you should see the ID device string. -
Oracle Database XE with Microsoft Windows Server 2008 (32-bit)
I would like to find out if Oracle Database XE works with Microsoft Windows Server 2008 (32-bit)?
If not, is there any other Oracle Open Source Database version can work with Microsoft Windows Server 2008 (32-bit)?
Any help would be greatly appreciated!I am installing W2k8 R2 Domain Controller with Oracle Express 10g.
This is the tip to make it work.
Go to the installer OracleXE.exe -> Right click + Select Properties + Compatibility + Run this program in Compatibility Mode fot + Windows 2003 Sp1
Then Select Run this Program as administrator.
After this run the OracleXe.exe and it will install properly.
Remember to double check that everything works fine. -
Unable to open Office files on SharePoint 2010 sites on Windows Server 2008 R2
Setup: Windows SharePoint Server 2010 sp1 on Windows Server 2008 R2 (hosted on VMWare VSphere ESXi 5.1)
Secured using Domain SSL from GlobalSign.
Client OS: Windows 7 Professional 32bit & Windows XP SP3 32 bit
Browsers: IE10, IE9,IE8
Office: Office 2010, Office 2010 sp2 (both 32bit), Office 2007
Problem Description: Only recently, users started having issues with opening Office files (Word, Excel) on SharePoint sites. When you click on an Office file e.g. Word Document, it comes up with the option to select "Ready only" or "Edit"
and choosing either options and re-entering the login credentials results in the
application hanging. If you leave it for a while (about 5 minutes) sometimes the file opens and other times it gives the error "Could not open https://portal.com/XXX/XXX/Document.docx". Even when it opens, it's extremely
sluggish and can't do anything other than end it via Task Manager. Same with excel files.
This happens to all the users all different OS and browsers.
On XP Pro SP3 w/ IE8, when you click on the file, the login prompt keeps popping back up repeatedly and if you click cancel, the file loads up anyway but no way of saving back onto the SharePoint site.
IMPORTANT: One exception is when logged in as a Site Collection Administrator, it
works like a dream bizarrely!!!! Opens, Edits and saves back fine on the SharePoint site.
Have tried following:
1. Repaired Office 2010 Pro; Uninstalled/Re-installed Office 2010 Pro
2. Reset Browser, unticked automatically detect proxy settings.
3. Emptied OfficeOfflineCache on Client
4. Removed WebDAV from the SharePoint server
5. Added Antivirus folder exclusion (We use SEP 11) on the SharePoint Server
Note: PDF files opens fine for all users.
I would immensely appreciate if anybody has got any advice/pointers/suggestions. Desperately out of ideas at the moment.
regards,
Compter Sez No!Hi,
According to your description, When you try to open a Microsoft Office document from a SharePoint 2010 site in a client application, the document opens slowly and you are prompted to enter your credentials multiple times.
This issue may be because of SharePoint Web Front End (WFE) server(s) has Antivirus software installed and the exceptions are not set correctly.
I recommend to remove the antivirus software or set the correct permissions for the antivirus software to resolve the issue.
To configure the antivirus exceptions, please follow the guidelines in the below articles:
KB943620:
Folders to exclude when you perform a file-level antivirus scan on a server operating system.
KB952167:
Certain folders may have to be excluded from antivirus scanning when you use a file-level antivirus program in SharePoint.
KB943556:
Recommended file and folder exclusions for Microsoft Forefront Client Security or Forefront Endpoint Protection 2010.
Best regards.
Thanks -
Opening Excel Workbook Fails when run from Scheduled Task on Windows Server 2008 Rw
Hi,
I have a little vbs script that instantiates the Excel.Application object and then opens a work book to perform some tasks on it. The script runs fine when run from the command line. When I attempt to run it as a scheduled task (it is supposed to update
data that is pulled from a SQL Server at regular intervals), it fails with the following error:
Microsoft Office Excel cannot access the file 'c:\test\SampleWorkbook.xlsm'. There are several possible reasons: .....
The file does exist. The path reported in the error is correct. The account under which the task is running is the same account I use to run it from the command line. User Account Control is not enabled, and the task is set up to run with highest privileges.
When I run the same script through the Task Scheduler from a Windows Server 2003 machine, it works without issue.
I was just wondering if somebody on this forum has run into a similar issue in connection with Windows Server 2008 R2 and figured out what the magic trick is to make it work. I'm sure it is rights related, but I haven't quite figured out what which rights
are missing.
Thanks in advance for any advice you may have.This is truly killing me ... trying to get it working on Windows Server 2012 without success.
I desperately need to automate running Excel macros in a "headless" environment, that is non-interactive, non-GUI, etc.
I can get it to work using Excel.Application COM, either via VBScript or Powershell, successfully on many other Windows systems in our environment - Windows Server 2008 R2, Windows 7 (32-bit), etc., -BUT-
The two servers we built out for running our automation process are Windows Server 2012 (SE) - and it just refuses to run on the 2012 servers - it gives the messages below from VBScript and PowerShell, respectively-
I have tried uninstalling and re-installing several different versions of Microsoft Excel (2007 Standard, 2010 Standard, 2010 Professional Plus, 32-bit vs. 64-bit, etc.), but it makes no difference.
Would be extremely grateful if any one out there has had any success in running Excel automation on Server 2012 in a non-interactive environment that they could share.
( I have tried adding the "%windir%\syswow64\config\systemprofile\desktop"
folder, which did fix the issue for me when testing on Windows Server 2008 R2, but sadly did not resolve it on Windows Server 2012 )
[VBScript error msg]
Z:\TestExcelMacro.vbs(35, 1) Microsoft Office Excel: Microsoft Office Excel cannot
access the file 'Z:\TestExcelMacro.xlsm'. There are several possible reasons:
• The file name or path does not exist.
• The file is being used by another program.
• The workbook you are trying to save has the same name as a currently open work
[Powershell error msg]
Exception calling "Add" with "0" argument(s): "Microsoft Office Excel cannot open or save any more documents because th
ere is not enough available memory or disk space.
To make more memory available, close workbooks or programs you no longer need.
To free disk space, delete files you no longer need from the disk you are saving to."
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : ComMethodTargetInvocation
You cannot call a method on a null-valued expression.
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull -
Windows Server 2008 Explorer error when i right click on folder
Hi everybody.
I have installed a new Windows Server 2008 64-bit, update it to latest.
I have a problem that happens when i right click on a folder. The error only happens if i right click on a folder that has only 1 character long folder name. Doesn't matter if the name is for example: "1" or "a" or "f", the explorer.exe crashes and gives me
error:
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
image:
full error info:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Explorer.EXE
Application Version: 6.1.7601.17567
Application Timestamp: 4d672ee4
Fault Module Name: msvcrt.dll
Fault Module Version: 7.0.7600.16385
Fault Module Timestamp: 4a5bdfbe
Exception Code: 40000015
Exception Offset: 000000000002aa8e
OS Version: 6.1.7601.2.1.0.274.10
Locale ID: 1033
Additional Information 1: f530
Additional Information 2: f5308e7edca7281fd3c8f9f1fa48021a
Additional Information 3: 4a44
Additional Information 4: 4a44581c8f470fcc2cbc842e91755c88
The error happened to me on different pc before so it is not related to hardware. The problem happens also if i create folder on desktop, problem stays if i create a new account, the problem goes away if i rename the folder to at least 2 character long name
(for example: "1a", "de"), by slowly double click it. If i go to Start --> Computer --> Local Disk (C:) --> create New Folder with 1 character long name and than go to Organize, i can cut, but not do the same to paste the folder inside another location,
because the error happens.
I didn't install Visual Studio.
How to solve the problem ?This is not the usual behavior of the windows Server.
Please perform the following things
1) Perform a clean boot
http://technetfaqs.wordpress.com/2009/05/18/how-to-clean-boot-in-windows-2008-server/
2) Go to the safe mode and try to perform a virus check using the malicious virus removal tool
https://support.microsoft.com/kb/890830/en-us
3) If none of the above helps then you should generate the dump file and analyze it to find the root cause of the problem which is not easy for the new users. How ever if you generate it and put it to the sky drive I will try to analyze and let you know
http://support.microsoft.com/kb/254649/en-us
http://www.arabitpro.com -
Download issue when Windows 7 Pro joins a Windows Server 2008 Active Directory
Hi,
I purchased 2 new Dell OptiPlex 3010 desktop computers that came with Windows 7 Professional operating system with SP1.
There were no Microsoft updates installed yet. After I added one of these Dell computers to the Windows Server 2008 Active Directory, I was not able to download several items.
Below are several examples:
1) I downloaded the Norton anti-virus installation file. This file is not the full installation of Norton; it is more of a file where you execute it and it will download the full installation from the Internet like from their Norton web
site. So when I executed this installation file, it does not download the full installation files.
It just hung at the screen saying “Downloading” and it will finally stop with an error (don’t remember the error message).
Note: If I have the full Norton installation file then I am able to install it on this computer with no problems.
2) I downloaded the Adobe Reader installation file. This file is not the full installation of Adobe Reader; it is more of a file where you execute it and it will download the full installation from the Internet like from their Adobe web
site. So when I executed this installation file, it hung at the downloading part and then it will error out with a “Actionlist Not Found” message.
Note: If I have the full Adobe Reader installation file then I am able to install it on this computer with no problems.
3) I installed Microsoft Office 2010 Standard version on this computer.
I configured Microsoft Outlook to retrieve emails from my email provider (pop and smtp settings).
After configuring Microsoft Outlook, I was able to send emails through Microsoft Outlook successfully (and very quickly), but he was unable to retrieve my emails. The progress bar for the Receiving in the "Outlook Send/Receive Progress" box
shows no progress. The Progress bar is not moving. There is a message at the bottom of Microsoft Outlook stating "Receiving message 1 of 6 (x.xx KB of x.xx MB)" and it is very slow. My new emails were not being retrieved at all.
I tried various pop and smtp servers that was available for my email provider, but all had the same effect.
4) I can access certain web sites (e.g.
www.yahoo.com, www.cnn.com) while I cannot access other web sites like
www.usatoday.com, my web hosting email site.
Note: I had a Dell computer with Windows XP Professional operating system and this computer does not have any of the above issues.
The above are only a few examples that I have experienced.
If I removed this Dell OptiPlex 3010 computer from the Windows Server 2008 Active Directory then I still experience the same issue.
So as another test, I setup the other new Dell OptiPlex 3010 with the same Windows 7 Professional OS with SP1.
This time, I did not join the Windows Server 2008 Active Directory and I was able to successfully download the full Norton installation files, download the full Adobe Reader installation files, download my emails from Microsoft Outlook 2010, etc.
But once I joined this computer to the Windows Server 2008 Active Directory then I am not able to download these files and emails at all.
It seems like there might be some group policy or a security setting that is preventing these downloads so I disabled the group policy on the Windows Server 2008 AD and Windows 7 Profession OS, but it didn’t resolve the issue.
I disabled all of the firewall programs on this Windows 7 Professional OS, but it still did not resolve the issue.
Since the Windows Server 2008 AD did not have DHCP installed, I installed DHCP and setup a scope.
Then configured the Windows 7 Professional OS to obtain an IP address, but it didn’t resolve the issue.
If I move this Windows 7 Professional computer to another network where it did not have any Active Directory; it just had a wireless router serving DHCP then everything works on the Windows 7 Pro computer.
Any ideas what is the root cause when a Windows 7 Professional computer join a Windows Server 2008 AD?
Thanks,
wl_techHi,
Could you please tell some information for the AD environment and how it connect to the internet?
Regarding 3rd party installlers didn't work as expected, please also seek help in their offical website.
For outlook not receiving emails, could you please take a look in
Event Viewer and see if there are any special errors logged there?
And when trying to access the website like
www.usatoday.com, any special errors IE showed out?
Best regards
Michael Shao
TechNet Community Support -
Blue screen when logging into windows server 2008 r2
when logging into windows server 2008 r2, all I have is a blue screen and the mouse.
I tried looking for solutions on the internet, then I found a microsoft hotfix "http://support.microsoft.com/kb/2590550" I run the hotfix in command line but it gave me nothing, no error or success messages.
I tried to reboot but I still have the same problem.
Is there any solution to this problem ??Hi,
Thank you for posting in Windows Server Forum.
Did you face this issue during remote session or console session?
In addition, have you try to change or install any driver\software which cause this problem?
Have you use any debugging tools from Microsoft to find respective error cause?
You can refer following article for memory dump.
How to read the small memory dump file that is created by Windows if a crash occurs
http://support.microsoft.com/kb/315263/en-us
Hope it helps!
Thanks.
Dharmesh Solanki -
Error when try to install exchange Server 2013 in windows server 2008 R2 Sp1
Hi
I'm getting these errors while trying to install Microsoft Exchange Server 2013 on my Windows Server 2008 R2 SP1 the user i'm using is the Administrator and it is already a member of "Enterprise
Admins" and "Schema Admins"
in my organization there is 6 Exchange server 2013 in 3 site windows server 2012 in this case
I have to install exchange 2013 in windows Server 2008 r2 sp1
the functional level 2008 R2 I getting these errors please help.
Errors:
This computer doesn't belong to a valid Active Directory site. Check the site and subnet definitions.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.InvalidADSite.aspx
Error:
A reboot from a previous installation is pending. Please restart the system and then rerun Setup.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.RebootPending.aspx
Error:
There is a pending reboot from a previous installation of a Windows Server role or feature. Please restart the computer and then run Setup again.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.PendingRebootWindowsComponents.aspx
Error:
You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedCafeFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedFrontendTransportFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
Error:
Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See the Exchange setup log for more
information on this error.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
Error:
Either Active Directory doesn't exist, or it can't be contacted.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspxI think it's from subnet in site and services
have 3 site A,B,C and new site is "D"I have problem in "D" site
A subnet is 10.33.50.0/24 AD 2012 ,exchange 2013
B subnet is 10.35.50.0/24 AD 2012 ,exchange 2013
C subnet is 10.36.50.0/24 AD 2012 ,exchange 2013
D subnet is 10.100.100.0/25 AD 2008 ,exchange 2013 error when install it
find event error
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair
the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
test-SetupPrerequisites
{Roles={LanguagePacks, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport, Cafe}, LanguagesAvailableToInstall=True, DomainController=, CustomerFeedbackEnabled=True, ExchangeVersion=15.0.847.32, LanguagePackDir=D:\Exchange
Server Software, SufficientLanguagePackDiskSpace=True, ADInitError=Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites
or by rep, ScanType=PrecheckInstall, LanguagePackVersioning=True, HostingDeploymentEnabled=False, TargetDir=C:\Program Files\Microsoft\Exchange Server\V15, SetupRoles={LanguagePacks, AdminTools, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport,
Cafe}} -
I have a problem with starting the Excel Application under a particular user (service account).
I try to schedule this C# script through an application X (not Windows Task Scheduler. And this
application will always use a service account to run services on the server). If I run the C# script in
command prompt under the same user, it runs. Under the application X, which uses the exact same
user, to initiate the C# script, it fails to open the Excel application (not sufficient permission?).
This script calls application.Workbooks.Open(<ExcelFileName>,0,false,Type.missing....). At this line
of code, it gives the following error:
Microsoft Excel cannot access the file "...". There are several possible reasons:
-The file name or path does not exist.
-The file is being used by another program.
-The workbook you are trying to save has the same name as a currently open workbook.
I tried all the methods that I found online as follow:
Create directory "C:\Windows\SysWOW64\config\systemprofile\Desktop" (for 64 bit Windows) or "C:\Windows\System32\config\systemprofile\Desktop" (for 32 bit Windows).
Changed the DCOM config for the Microsoft Excel application to include this user for Local/Remote Launch and Access.
Enabled all macros in Excel application and set the Trust Center.
Add the user to have full control on all folders that contain the Excel file.
Under DCOM
config, Microsoft Excel Application, if I modify the Identity tab to check on "This User" and enter the username/password to let Excel always run under that user. Then the application runs perfectly. However, other users can't run the excel application
on their own with the following error: "Cannot use object linking and embedding". If I check "Use the launching user", then Excel can't be launched. No errors in the logs or events anywhere to check.
Yet, still the same error. I think it's permission but I am not sure where and what to do for this to work.
Now, normally, when I run this excel report, I can double-click on the file and it'd automatically run,
save the new parameters into the current file and generate a new excel file (with date attached to the
file name). That means there is a change (save) to the original file.
Environment: Windows Server 2008 R2 and running Microsoft Excel 2010.
I appreciate all your help!I am wondering if this has anything to do with having the user log into Excel.
In point #5 above: Under DCOM config, Microsoft Excel Application, if I modify the Identity tab to check on "This User" and enter the username/password to let Excel always run under that user. Then the application runs perfectly. However, other
users can't run the excel application on their own with the following error: "Cannot use object linking and embedding". If I check "Use the launching user", then Excel can't be launched. No errors in the logs or events anywhere to check.
Because running with the launching user proposes an user to run the Excel application. However, I do not think there is any where that we can pass in the password for this user to Excel. However, this Excel has all the permissions to Excel application as
well as the folders that have the Excel files.
Please help!
Thank you! -
File and printer sharing for Microsoft Networks on Windows server 2008
Hi Expert,
I found that the properties of File and printer sharing for Microsoft Networks service disabled after I install the windows server 2008 64bits. I tried to install that service via adding the file and printer sharing services in the properties of local area connection, but it doesn't contain any service in the popup box. Also, no such service file available in the disk when I tried to install the service from installation disk of windows server 2008 64bits. Is the file "sacsrv.dll" corresponding to the service name of file and printer sharing? I found it is in the directory of "Windows\system32". I have no idea about where is the problem? Do I miss some components? Please tell me what can I do for it? Thanks!
Best Wishes,Do any experts know the reason of this problem? Thanks!
Maybe you are looking for
-
BT/Openworld have cancelled my installation 3 times now. First time I hadn’t received the Hub the day before the installation so I called them and was told the order had been cancelled, as I hadn’t paid a £50.00 deposit. At no time was I asked or tol
-
ERROR request POST returns a 411 error
I have some problems sending a POST request from my midlet: if i send from 1 to 1448 the servlet takes the content and stores it on a local file if i send from 1449 to 2000 the servlet takes the content and stores it on a local file up to only 1.41 k
-
Determine the Number of Characters in a field
Hello All, I have a program where a character field of length 200 becomes populated with Purchase Order Text. Is it possible through a function module or another option to determine the length of the field when populated? For instance, if only 125
-
Problem in integrating sunone webserver with websphere app server
Hello all I am trying to integrate sunone6.0 webserver with websphere5.0 app server. I did the following changes in sunone6.0 config files 1) Added one directive to the obj.conf file after "<Object name=default>": Service fn="as_handler" 2) Added two
-
Any help? I am unable to change my settings because my iPad is not recognizing my Apple ID and password. Everything is correct,but I keep getting the message that an error occurred during activation. Try Again. Thank you!