Windows stopped working after 1 month

Windows stopped working. Nothing opens up. I can not go into settings. The apps do not open up. The system restore does not work. It will not allow me to to reset to factory reset. This is horrible. I can go into the desktop screen and Internet thankfully. Only had it for one month. I miss my old Toshiba laptop.

jmedure wrote:
Unfortunatly it gives no errors message. However, I do have her IT people checking. I did valiate FIOS does not block VPN by setting one up for my work and connecting to it. So it seems to be something that maybe her work needs to fix. I did notice her work website can not be accessed either by our home network, but it can from other sources. Makes me wonder if there is something where my FIOS DHCP address matches her work or something weird because everything else works. LOL
Chances are good it's a routing breakdown at this point, if her work hosts the VPN Concentrator within the same datacenter or address space as their website. They could also be on the same machine for all that matters.
Likely, if you run a traceroute from FiOS to the datacenter, and back you'll see where the connectivity may be dying at.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Similar Messages

Time capsule POS! stopped working after a month and no ability back up data for 71 days now. Apple never returned my calls!

Does anyone have a better suggstion than waiting for apple to return my call? 71 days with no back ups and my new 2T unit stopped woprking after a month and living in the Turks & Caicos Islands there is no locoal support (I bought the unit from APple in Miami) According to the diagnostic tests I ran the unit is shot and needs replacing.. Wireless works fine though.. Seems to be a common problem with this unit. Would ahve been better off with my old airport extreme, I ahve had for five eyars, but it no longer hs enough capacity.

Does anyone have a better suggstion than waiting for apple to return my call? 71 days with no back ups and my new 2T unit stopped woprking after a month and living in the Turks & Caicos Islands there is no locoal support (I bought the unit from APple in Miami) According to the diagnostic tests I ran the unit is shot and needs replacing.. Wireless works fine though.. Seems to be a common problem with this unit. Would ahve been better off with my old airport extreme, I ahve had for five eyars, but it no longer hs enough capacity.

Crystal Report stop working after one month

Hi all,
I have downloaded crystal reports 2008 for SAP business one from the SAP service market place on 01.11.2008 and installed at customer site on 21.12.2008. We also developed and delivered 6 report template to customer using it.
These all 6 reports were working fine till yesterday.Suddenly from today morning (21.01.2009-exact one month after installation) all these 6 reports has stopped working.
Can anyone tell, why it is behaving like this ?
BR
Samir Gandhi
Thread moved by: Darius Heydarian on Jan 21, 2009 1:54 PM

Hi,
I think you downloaded the trial version, you need to buy it now.
Cheers
Shahid

Two Time capsules that stopped working after 12 months

2 years ago I bought 2 time capsules(2 TB). I used the first for 12 months and was very happy until it just stopped working suddenly. I couldn't turn it on at all. I then started using the second Time Capsule that had never been taken out of the box. Now 12 months later exactly the same thing has occurred to this second Time Capsule.
Any tips to stop this happening again would be gratefully received.

Check out this and have a look for your serial numbers:
http://support.apple.com/kb/TS3351?viewlocale=en_US
Message was edited by: MarcosCastellano

My lock button stopped working (after 4 months) and was wondering if there is any other way to take screenshots?? Please help! Thanks :)

My lock button just stopped working on my iPhone 4. I was wondering if there was any other way to take screenshots? Please help!!

Hi jess,
If your phone is only 4 months old, you should take it back to your Apple Store and have it replaced.
Cheers,
GB

B450 battery stopped working after 9 months

I bought my B450 in Thailand since I'm living here.
After 9 months of use, the battery suddenly died.
I bought it in a big shopping centre and as I check my warrenty card now, it says that the warrenty does not include consumable items such as batteries or adapter.
Can it be? Shouldn't I have at least 1 year warrenty for the battery?

it could be. warranty conditions may change by country. call lenovo support line.

One year subscription stopped working after a month

I purchased the one-year student & teacher subscription and after exactly a month it said my subscription is over and that I had to download creative cloud, so I did that thinking it would work.. it didn't.. I then checked my e-mail and it said my creative cloud subscription got downgraded, so now I don't have to pay anymore, but if I don't pay, my software won't work (I paid €19,99/month i purchased my software when the discount was still running and i'd like to keep paying the 19,99 euros instead of the full price) I need help as soon as possible because I have exams and I need this software to make them! Please help me..

I have responded to you by email to resolve the issue. My email is [email protected]

"scan to network folder" suddently stopped working after many months of no issues

scan to network folder was working fine over a wireless network to a folder on my file server - for many months.
This weekend I noticed the printer said it was "updating".
I guess it must have done some kind of automated update or something because I did not initiate an update.
Suddenly scan to network folder fails to work.
When I try from the printer, it says cannot connect to \\computer\folder
When I test from the embedded web server on the printer "Connection Failed"
The folder is online. I can access it from another computer.
I have also tried setting up a second folder config using the IP address as \\x.x.x.x\folder(The first 3 sets of digits in the IP addresses are the same for printer and network server) I even tried setting up anoter account to authenticate to the file server with a simpler password for testing purposes to rule out typographical errors. I have tried bouncing the printer, the router, the network server and the wireless access point all to no avail. It looks like the printer is failing to find the network server anymore.Pity there is no "ping" option on the printer to test if it can even see the network server anymore. I can "scan to computer" to another computer on the wirless network.But I like the convenience of being able to scan to a defined network folder whether my other computer is turned on or not. Does anyone know if HP pushed out a printer update this week or something?Just wondering why it suddenly changed.

Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Tablet stop working after two months

Dear Sir/Madam,
I am using a tablet Seriel Number: <Personal Content Removed> in Cambodia and did not work over two weeks (Can not turn on) after buying over 2months from Sanfrancisco, USA. I would like to send back your repair center, so could you tell me where should I send from Cambodia? you can contact me<Personal Content Removed>
Look forward to your reply soon.
Best regard,
Mao

Sunmao wrote:
I would like to send back your repair center, so could you tell me where should I send from Cambodia? you can contact me<Personal Content Removed>
Try what has been recommended above.
This is a user-to-user community support forum. We are not RIM employees, but volunteers who enjoy assisting other users. RIM personnel rarely comment on queries posted here.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Tx2z stops working after 12 months

has anyone else had the screen on their touchsmart tx2z go blank after 12 mo. mine did after 18. I have been told by someone inside hp that it's a know
issue to stay away from them.

You could try an Apple store if one is near you, however you are simply relying on the staff to take pity on you to get a replacement that is out of warranty.
You can also call back Apple to see if you get any other support staff or try escalating by asking for higher up members of staff - but this may just result in you waisting time & getting more frustrated.
Refurbished models are basically new devices based on the reports on here - Apple replace so much that the device should be reliable, clean etc.
It may be your best option.
If you are still dissatisfied you could look at your consumer rights, there is often protections in place for goods to be 'fit for purpose' and have a 'reasonable lifespan', this will vary per country and per region and you may want legal advice before beginning.
Another option you have is to look elsewhere for a repair, Apple don't repair these devices they simply offer replacements. Other companies will offer repairs.
There are many places online that sell parts too if you are willing & able to repair it yourself - obviously voiding the warranty and any chance of more support from Apple if you or anyone else opens the device. Diagnosing the issue is your biggest battle with that, combine that with how intricate the parts are & how it is put together you have more to lose than gain by opting to go that route.

Coldfusion 64 bit windows installer stops working after recent microsoft update

Coldfusion 64 bit windows installation stops working after recent microsoft updates and how I worked around it.
My question is at the end.
Trying to deploy coldfusion 9 enterprise 64 bit trial version onto a Windows 2003 64 bit datacenter OS with all OS updates from MS (as of 4-7-2011).
Steps taken (remember, this is all 64 bit):
1. Installed the base OS which was slipstreamed with SP2.
2. Checked w/ microsoft and installed 63 OS updates.
3. Launch the CF9 trial exe.
4. As soon as the first screen finishes (the one that looks like it is extracting files) then the second screen pops up (the one that simply says CF Adobe Coldfusion 9) and the progress bar quickly moves 95% to the right and the install application quits. No error, no nothing. No log file either.
5. After a moment of incredulous silence (and retrying/rebooting, etc), I started to google it. I found nothing. However, I did find a post (thanks dspent!) that was helpful in that it told how he was able to get at a log file of sorts, by pre-extracting the coldfusion_9_WWE_win64.exe file and launching the adobe_cf.exe by hand. (Dspent's install snafu was different than mine, but his post was very valuable and got me started in the right direction.)
6. Got a copy of rarunzipper and extracted the coldfusion_9_WWE_win64.exe file.
7. From the windows directory created by step 6, I launched adobe_cf.exe.
8. Same thing (the install application quits. No error, no nothing. No log file either.).
9. I examine the hs_err_pidxxxx.log file (where the xxxx is a number).
10. I see inside that file an ominous message: "A fatal error has been detected by the Java Runtime" then "Problematic frame ntdll.dll" and then "The crash happened outside the Java Virtual Machine in native code".
11. OK, so now I am thinking ntdll.dll !! Native code !! It is like Java is telling me that for some reason it can't dance with the OS.
12. On a hunch, I decided to test a CF install again on a server with just the base install of W3K3 64 SP2 (ie: skipping step 2 above this time).
13. Bingo! That install works.
14. Therefore, one of the 63 patches I had downloaded from MS had triggered a problem with the CF installer.
15. Back on the first server (the one with the MS security patches installed and the one that CF won't install on). In the CF file adobe_cf.lax (one of the files extracted in step 6) there is a line that mentions where the install gets it's java. Find that file, and check java version installer is using. It is using 1.6.0_14-b08.
16. Off to the Java website, and there is a newer version of java (1.6.0_24-b07). Downloaded and installed it.
17. Modify a line in adobe_cf.lax :
   before
     lax.nl.current.vm=resource\\jre\\bin\\java.exe
   after
     lax.nl.current.vm=C:\\program files\\java\\jre6\\bin\\java.exe
(that assumes that you let step 16 install to the default location)
Save the file.
18. Run the install ... ** IT WORKS ** !
Obviously, the built in java provided with the CF installer is no longer compatible with some change introduced by some recent MS update on the W2K3 64b SP2 platform.
And now the interesting part. Although I forced the installer to used the new java, it did not incorporate it into the cf build (ie: in jvm.config, you still see c:/coldfusion9/runtime/jre AND the version of java.exe that is in that directory is the original version, not the newer version I forced the installer to use).
On the surface, CF seems to run OK, but I have not done any application testing yet.
And finally my
** QUESTION **
Would it be appropriate to simply point the java.home var to the new java directory? I see that the directory structures and files are not exactly the same (close though) so I certainly don't want to break things by doing this, but instinct tells me that if the installer broke using the older version, then something else is gonna break down the road if I don't use the new version. On the other hand, the differences in the directories and files is enough that it makes me very nervous, with my limitied java skill set, to make this decision.
Thanks in advance!!
Byron

Hi Byron,
Wow great post no doubt much of the information will be useful for those on Win03 SP2 +. Have to say not come across similar problem on Win08 r2 SP1 +.
So to your question. Adobe security bulletin (http://kb2.adobe.com/cps/894/cpsid_89440.html) recommends running CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do that. I take you installed JDK and not just JRE 1.6.0_24? Post install of JDK follow these steps:
Stop CF - SERVICES.msc stop "ColdFusion 9 Application Server".
Take a copy of CF\runtime\bin\jvm.config - so you got a backup.
Edit CF\runtime\bin\jvm.config find line "java.home=" and comment it out eg:
#java.home=C:/ColdFusion9/runtime/jre
Add new line like so and save jvm.config:
java.home=C:/Program Files/Java/jdk1.6.0_24/jre
Note there the slashes and the location of the JRE (runtime) - you need to point to the one in JDK because the other JRE in C:\Program Files\Java\jre6 will be missing a DLL.
Start CF via SERVICES.msc.
HTH, Carl.

Bonjour printer on Windows XP's stops working after reboot

Hello!
We have a AirPort extreme with an HP LaserJet 1010 connected to it. AirPort Extreme also serves as a gateway and DHCP server for the LAN.
Installing the printer on the local machines running Windows XP thru Bonjour works fine and all the documents are printed correctly. The printer is being installed as a single default printer on the system.
However, printer stops working after Windows XP machines are rebooted (the next morning). The installed printer keeps accumulating documents in queue and not spooling them to the printer. Issue could only be resolved by adding a new printer (which also works fine).
It seems not to be a connectivity problem as XP machines access the Internet thru the AirPort Extreme without any problem. Bonjour printer setup wizard also instantly sees the printer and is able to install it correctly. Mac's in the same network (iBook G3 and PowerBook G4 with Tiger) are not affected by the issue.
Any ideas on how the situation could be corrected?
- Baglan

Did anyone find a solution to this.
I have a HP Laserjet 1020 attached to my Airport. Using the Bonjour program on my Windows XP computer it found the printer attached, and added it to my printers. When I print all seems ok - it appears in the printer queue, then disappears as though its printed - but nothing comes out of the printer.
Any ideas? Thanks.
Message was edited by: jonny999

Windows 7 professional backup and restore stop working after installation of acronis true image 2010

HI,
windows 7 professional backup and restore stop working after installation of acronis true image 2010. it generates a error code 0x81000019. please help.
thanks
Song

Sankalp,
I too have the error 0x81000033 when running the full system image backup. I could not assign a drive letter to my 100mb drive with the Disk Management. So, I went into the diskpart and ran the following commands:
diskpart
list disk
DISKPART> list par
Partition ### Type              Size     Offset
Partition 1    System             100 MB 1024 KB           ( 78.2 of 96.0MB free )
Partition 2    Reserved           128 MB   101 MB
Partition 3    Primary             73 GB   229 MB
Partition 4    Recovery           423 MB    74 GB
sel dis 0
list par
select partition 1
assign letter=q
fsutil usn queryjournal q:
fsutil usn deletejournal /D q:
After diskpart, I opened the "My Computer" and see that I have 78.2 of 96.0MB free. Despite that, I ran these commands on the new q: drive:
C:\Windows\System32>q:
Q:\>fsutil usn queryjournal q:
Error: The parameter is incorrect.
The FSUTIL utility requires a local NTFS volume.
Q:\>fsutil usn deletejournal /D q:
Error: The parameter is incorrect.
The FSUTIL utility requires a local NTFS volume.
Q:\>
Any help is appreciated.

Windows media player stop working after upgraded from firefox 6.02 to Firefox 7.01 yesterday.

windows media player stop working after upgraded from Firefox 6.02 to Firefox 7.01 yesterday.
the plugin for win media player is already installed and working fine in FF 6.02 before upgrade. i have Google this issue without any result so far. so i reinstalled the old version 6.02, until fix is found.
anyone has the similar issue with Firefox 7.01 in Win 7 32 bit ?

The issue was not with FF 7.01. VLC player version 1.11.1 is conflicting with windows media player when FF 7.01 tries to play media files! Which was not happening before in FF 6.02.
VLC and plugin media player need to be uninstalled first, then uninstalled FF 6.02. Install FF 7.01 and then win plugin media player again.
Test media player at www.vdat.com/techsupport/windowstest.asp

Why did AME stop working after the last Windows 7 update

AME suddenly stopped working after the last Windows 7 update. After the initial splash screen, I get a message saying that AME is not working and the program will be closed. Then I get the windows message that it is searching for a solution, then nothing. I am using the Production CS6. This happens whether I try to start AME directly, or queuing through Premiere Pro. I have tried reinstalling the entire package and have implemented all available updates from Adobe. I have no clue why this happened, but AME is crucial to my workflow.

Try to delete the following folders and then launch AME:
%AppData%\Adobe\Adobe Media Encoder
%AppData%\Adobe\Common
Make sure to first make a backup of those folders.

Windows stopped working after 1 month

Similar Messages

Maybe you are looking for