WIP in KKS2 for PER

Hi,
When the Work in process in KKS2 will be updated in PER settlement.
Thanks,

where is the column wip in kks2, please check it again. wip is calculated in kkax, while doing the transaction kkax wip is just calculated and there wont be any update of fi document.
but while doing settlement through ko88 it creates fi document where wip gets cancelled, ie it updates wip balancesheet account and wip profit and loss account

Similar Messages

  • Open POs for per SOs

    Hi All,
    How can we open POs for per SOs?
    We want open 1 PO concerning all the items in 1 SO..
    So we will try to pack POs seperately for 1 customer.
    Thanks
    Regards
    Siva

    Siva,
    Please remember that a single PO is procured from only one vendor.  It is a rare event when all items in a single SO can be procured from one vendor, and would thereby qualify for inclusion in a single PO..
    You may manually create POs with as many items as you wish.  Once you have determined the materials/qtys you wish to purchase to support a particular SO, just manually enter them all into a single PO.
    Best Regards,
    DB49

  • Cost center missing for pers. no

    Hi,
    While prosting exps in TC: TRIP, we are getting the error "Cost center missing for pers. no". After analyzation the issue we came to know that there is no relationship with org. assignment. We went to TC: PO13>give position>select relationship-->click on create infotype. Here we have given relationship A 011and click on save and again save. Now, we went to TC: PA20/30 cost center is appearing correctly.
    We have couple of pers nos. Instead of doing manuallthis we are doing executing program RHINTE30 in TC: SE38. But it is not updating cost center in TC: PA20/30. How should i achieve this issue? Pls advice....

    you are correct RHINTE30 report will update Cost Center in IT 0001 from OM. Before that you have to upload CC to position through T.code  P013 using either LSMW / BDC.
    For updating CC in IT 0001 process is below.
    First Create Cost center to position using P013 t.code and relation ship A 011.
    Excutre report RHINTE30 using T.code SE38.
    After that there will be one batch input session created in SM35.
    Finally Select your batch input session and Excute through SM35
    Then CC will be updated in IT 0001.
    If there are no much employees you can manull create CC directly in P013 and CC will directly upte in IT 0001.

  • Symbol for "per thousand" in smartforms

    Hi
    I need to print the symbol for "per thousand" (or "per mill" or whatever it is called in english) in a smartform textmodule -> ‰
    But whenever I paste it from Word it is being replaced by an #. I also tried ALT-codes with no further success. Does anybody have an idea?
    thanks

    Hi Marcus,
    you can use the SAP-character 189  in order to add symbols PER MILLE SIGN. You can add the  SAP-character into Smartform output document. In general, SAP icons or SAP symbols must be specified within the old Line Editor with the special display: <189>
    Other possibility: Use the 'Insert field' function for this task (the icon with the green Plus sign in the text editor toolbar). In the dialog box, enter the relevant SAP character, in this case <189> . and then follow the note 535936 as I wrote above.
    Hedvig

  • No read authorization for info type 2001/0402 for pers. no. 00000018 betwee

    Hi,
    Mangers try to approve the leave request iam getting below error.
    No read authorization for info type 2001/0402 for pers. no. 00000018 between 04.05.2010 and 04.05.2010.
    how can i resolve this issue.Pls help me
    Please advice
    Regards
    SATYA

    Hi Satya,
    Check the authorizations for the user in mentioned infotypes, you can help you with SU53 and ST01 (using auth trace) transactions.
    Regards

  • WIP is calculating in PER

    Hi Experts,
    Client is in Discrete Manufacturing.
    I have created the order type with PER settlement and created one production order with qty 23 with 3 operations.
    operation 1 confirmed entire 23  operation 2 confirmed 13 as yield and 3 as scrap and operation 3 confirmed 9 as yield.
    I could able to see the variance in KKS2 but not able to see the WIP KKAX, its showing as zero.
    when i see in the Production order the target cost also showing as zero.
    Kindly help me on WIP calculatiion as am in middle of discussions with business.
    Thanks,

    Hi,
    I have checked both
    1. Standard cost exist for Material and Target cost is getting updated in Production order
    2. RA key is updated in Production order.
    I have 3 operations and qty confirmation as below
    Operation 1
    entire 23
    Operation 2  9 yield and 3 scrap  -  at this stage if i execute KKAX i could able to get the value
    Operation 3  Yiedl 4  -  here i couldnot able to see the WIP.
    Kindly help.
    Thanks,

  • WIP configuration - GL for WIP - Product Line wise

    Dear All
    Is there a way to maintain Fl accounts product line wise to configure WIP. i.e.: we have 4 different production line for different products. Currently we assigned common GL account against cost elements.
    Thanks
    MKJ

    Hi
    If you are asking for Separate GL Accounts for Posting in FI - Its not possible
    In CO, you can manage separate secondary cost elements (Catg 31) by creating Separate Line ID and RA Key as per your Product Line
    In BADI Workorder_update, you can write a logic to default an RA Key in the Prod order depending on prod line
    br, Ajay M

  • I downloaded mountain lion onto my old mackbook pro, but would like to wipe it clean for my girlfriend, is there a way to wipe the computer clean, but still be able to keep mountain lion on it even though i already downloaded it?

    Hey everyone, I just got the new retina display macbook pro, and here is where the problem lays is with my old macbook pro. I am wanting to give it to my girlfriend, but want to wipe the computer clean so she can have the macbook the way she wants it. I already downloaded mountain lion and was wondering what I need to do in order to keep mountain lion, but wipe everything else? I do not have any of the CDs for the old Macbook pro

    To second baltwo's post:
    Your license for Mountain Lion (or any OS version purchased at the app store) is not transferable - you can use it on any Mac you own and control; however, someone else getting that machine means the recipient will need to purchase ML The SLA states that you must erase the drive and reinstall the original OS. You will need to call Apple for replacement install disks.
    If you leave ML on the machine, the recipient will never be able to reinstall the OS since the new Apple ID and machine ID no longer match.

  • Windows Installer repair issue for per-user folders/files

    Intro:
    I have doubts that this is the right place to ask about this, since this issue has existed for me on many windows platforms, please suggest where this should be forwarded if this is an inappropriate place to ask.
    Please do not be confused by the directory paths for XP, this issue is also true for Windows 7.
    Description:
    Windows Installer does not repair files in per-user directories, such as [AppDataFolder], when initial installation is performed using system account (for example - distributing the package through SCCM or using psexec) and repairing under a user with administrative
    privileges (limited user repair works fine).
    Example.
    .msi installation installs a custom .xml configuration file to "[AppDataFolder]". We're installing .msi by using psexec /s. log output:
    MSI (s) (D8:F0) [15:19:01:214]: Executing op: FileCopy(SourceName=SETTIN~2.CON|customXML,SourceCabKey=customXML,DestName=customXML,Attributes=16384,FileSize=2633,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,,,InstallMode=58982400,HashOptions=0,HashPart1=-1992414570,HashPart2=1238809189,HashPart3=-80616146,HashPart4=146746036,,)
    MSI (s) (D8:F0) [15:19:01:214]: File: c:\WINDOWS\system32\config\systemprofile\Application Data\customXML;
    To be installed; Won't patch;
    No existing file
    MSI (s) (D8:F0) [15:19:01:214]: Source for file 'customXML' is compressed
    MSI (s) (D8:F0) [15:19:01:230]: Note: 1: 2318 2: c:\WINDOWS\system32\config\systemprofile\Application Data\customXML
    When a user with administrative credentials accesses the advertised shortcut repair is run on the component that has the .xml configuration file, event viewer has an entry about this.
    The verbose repair log file shows the following entry:
    MSI (s) (D8:E4) [15:22:27:667]: Executing op: FileCopy(SourceName=SETTIN~2.CON|customXML,SourceCabKey=customXML,DestName=customXML,Attributes=16384,FileSize=2633,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,,,InstallMode=16908288,HashOptions=0,HashPart1=-1992414570,HashPart2=1238809189,HashPart3=-80616146,HashPart4=146746036,,)
    MSI (s) (D8:E4) [15:22:27:667]: File: c:\WINDOWS\system32\config\systemprofile\Application Data\customXML;
    Won't Overwrite; Won't patch;
    Existing file is unversioned and unmodified - hash matches source file
    Limited user repair log reads:
    MSI (s) (78:8C) [15:26:27:406]: Executing op: FileCopy(SourceName=SETTIN~2.CON|customXML,SourceCabKey=customXML,DestName=customXML,Attributes=16384,FileSize=2633,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,,,InstallMode=16908288,HashOptions=0,HashPart1=-1992414570,HashPart2=1238809189,HashPart3=-80616146,HashPart4=146746036,,)
    MSI (s) (78:8C) [15:26:27:406]: File: c:\Documents and Settings\test\Application Data\customXML;
    To be installed; Won't patch;
    No existing file
    Your suggestions will be very much appreciated.

    Hello,
    Did you ever get to the root cause of this?
    I have a similar problem with a custom XML that is reported as "empty or is not a xml file." in the logs.
    Wondered if you had found the root cause?
    Kind regards,
    Sio.

  • Report to see WIP calculation details for sales order

    Hi,
    I want to know which is the best report to see the details of WIP calculation for a sales order. There is a WIP posting of 1 million to a sales order and i want to understand how this amount was computed.

    Hi,
    Yes when i went there and call up the line items report i got the following error :-
    Display of debits for object type SDI is not included
    Message no. KD232
    Diagnosis
    You want to display a report for the current sender. This function is currently only possible for the following object types:
    Cost Object
    Orders
    WBS Elements

  • SPL document numbers for per ledger

    HI Gurus,
    For special purpose ledger I want to assign number ranges per ledger. i.e. number ranges should be different for each ledger or I want to have a SPL document number percompany code. I have around 90 company codes opearting in my system.
    Please help me with suitrable user exit.
    Thank You!!!

    hi
    you can create your number range group and assign each one with different numbers as required by you.

  • Clean wipe of HD for security purposes

    I just got a new MB and plan to give my 6 yr old iBook to my brother in law, living in Taiwan and who will eventually install chinese language OS. For now, I'd like to wipe clean the HD - after six yrs, I've got tons of financial stuff, passwords, etc. stored.
    Will erasing HD with disk utility be enough? I understand data can still be retrieved. What's the best way, short of installing new HD to format and x things out?

    Here's what you should do:
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the drop down menu to one (1.) Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID for Intel Macs or APM for PPC Macs, then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Zeroing the data will effectively remove everything on the drive assuring that no data can be recovered. After formatting has completed quit DU and return to installer. Now complete the OS X installation. At the end of the installation you will have a Restart button. Do not click on it, but instead just eject the installer disc then shut down the machine. When your brother-in-law starts the computer it will boot to the Setup Assistant where he can set up his own admin account and user information as if the computer were new.

  • How to wipe Touchsmart 300 for resale (don't have Windows discs)

    I have a TouchSmart 300 and want to sell it and so need to restore it to factory settings and do a complete wipe of any memory of account passwords, personal data etc. The problem is I can't remember how I set up the pc originally, i.e. whether I just switched it on and it was good to go or if I had install discs and can't find any.
    How would I go about achieving this so I can sell it in confidence that all my data has been wiped?
    This question was solved.
    View Solution.

    Hello @Porkpie74,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are wanting to do a factory recovery on your HP Touchsmart 300 and are not sure how. As you did not indicate the model or operating system I am going to provide you with the needed document below. Simply choose the one that is for your operating system and follow the instructions.
    Performing an HP System Recovery (Windows Vista)
    Performing an HP System Recovery (Windows 7)
    Performing an HP System Recovery (Windows 8)
    Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • WIP Assembly Completeion for a returned Serial Number

    Hi friends,
    We want to use a serial number which has been returned already via WIP Assly return against a job.
    System is not allowing to consume the same serial number against another discrete job.
    To throw you light on the above issue, please find the exact sequence of operations happened.
    1. Created a discrete job. Job Number : 63166-10142 for 20 quantities.
    2. The job was initially completed for 20 quantities bearing 20 different serial numbers.
    At this stage, in the discrete job > job history - Quantities completed was '20' and Quantities remaining was '0'. The job status was 'Completed'.
    3. Later on Assembly return for one assembly was done bearing the serial number-80E62679970.
    4. Now at this stage discrete job status was 'Released' and in the discrete job > job history - Quantities completed was '19' and Quantities remaining was '1'.
    5. Now the user completed the discrete job 63166-10142 , with a serial number -80M62724253.(which is different from the returned one).
    6. Now at this stage discrete job status became 'Completed' and in the discrete job > job history - Quantities completed was '20' and Quantities remaining was '0'.
    7. Now the user wants to use the serial number-80E62679970 which was earlier returned in another job.
    The system is not allowing to use the serial number as it is already used.
    Already a SR has been logged with Oracle.But it is pending with them and still we are struggling to find a resolution.
    Any pointers would add on to our dimension of thinking.
    Regards,
    Bala.

    Hi Bala,
    Can you mention the status of the serial number you have used (80E62679970) now.
    Navigate : Inventory > On-hand Availability >Serial Numbers
    In the Serial Info Tab you can find the current state of the serial number.
    If you pass on the info, i can try to help you out.
    Thnaks,
    Saravanan

  • WIP revaluation Implementation for Brazil Localization

    Hi Experts!
    I need your knowledge for wip revaluation as follows.
    1.Is  WIP Revaluation(not semi-finished material) mandatory for actual cost  in Brazil according law?
    2.If it is mandatory, After actviation of WIP revaluation of material ledger(CKMLCP),
      Do we have to  revaluate avitivity price at matrial ledger closing instead of product cost collector closing
      during the mothly closing?
    I'll appreciate your reply!
    HK

    Hi
    Go to  SPRO-Controlling-Product Cost Controlling-Actual Costing/Material Ledger-Actual Costing-Activate Actual Costing
    IUpdate of Activity Consumption in the Quantity Structure
        Setting for updating the consumption of activities and processes in the
        actual quantity structure. Three different settings are available:
        '0' = Update is not active
        '1' = Update is active but not relevant to price determination.
        Consumption is updated in the quantity structure but not taken into
        account upon price determination.
        '2' = Update is active and relevant to price determination. Variances
        between the activity prices/process prices posted during the period and
        the actual price at the end of the period are adjusted subsequently.
    Consequences
        If the update is relevant for price determination in a plant, all
        allocations to orders that are settled to materials are posted with a
        constant price throughout the period. The valuation strategy is
        invalidated inasmuch as a price is calculated according to the strategy
        only for the first activity allocation. For all subsequent allocations,
        the constant price is used, even if the strategy would dictate
        otherwise.
        The update settings can only be used together with Actual Costing.
      Data can not be updated correctly if the setting changes within the
      period. (price determination would generate incorrect debits to
      materials)
    Dependencies
      If you activate activity consumption update in the quantity structure
      with the with (Activity update relevant to price determination), the
      differences for the cost centers/processes are subsequently debited to
      the relevant material. Therefore, if you activate the activity
      consumption update in the quantity structure  with setting '2', you
      cannot complete the step 'revaluate actual prices' during period closing
      for Cost Object Controlling as this would subsequently debit the
      material twice.
    Srinivas

Maybe you are looking for