Won't power down

My phone recently started an issue when I push on the power button to either to turn it on to check things on my phone or to power it down nothing happens. I have to either call my phone from another phone or plug it in so I can use it to unlock to make calls. This just started to happen two days ago. I take great care of my phone, never dropped it or banged it so I am confused about why it is happening. Also I tried to hold the power button and volume down to reboot and that does not work as well.

Hi Pared,
Oh no! A working power button is essential to a device. Let's get this resolved. Is there a case covering the device? If so, please remove the case. Has there been any liquid or physical damage to this device? Does the button feel loose? Keep me posted
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

Similar Messages

Zen Vision:M 30GB won't power down; any ide

I've had a 30GB Zen Vision M for a couple of months now! Awesome player, went through the usual round of recognition problems, but it's been working fine of late. My problem is, it won't power down now. When I try to power down, the unit says it's powering down, the dispaly goes black except for the battery icon. And it stops there. The blue backlight on the menu buttons stays on, the battery icon stays on, and eventually it turns off after 5 minutes because of being idle. Not a terrible problem I know, but a real niusance. I am running the most current firmware (have been for a while). I've tried resetting and clean-up. No change. I'm afraid of trying to reinstall the firmware, in case I have the same problem that many others are having, and go from a good player with a power issue, to a player that does nothing. I can't see it being the power switch itself, since it powers up fine, and tries to power down. Any ideas or advice would be greatly appreciated. birder

Hello Dsgrov,
Welcome to Creative forums!
You can get a lot of results if you search "Zen Vision M not charging" on the search box.
Here's one, you might want to check this thread.

My iphone won't power down and stays on all the time. I have rebooted but it still wont power down. any solutions?

My iphone stays on all the time and won't power down. I have tried rebooting but it still won't power down. any suggestions?

i mean that after i use my phone it won't go to a black screen after a few minutes...i guess maybe its called to 'sleep' but the screen stays bright...the light doesnt dim.

My iPod won't power down?

Hello
I have an iPod Nano that I keep on a radio/alarm clock thing. Sometimes when I take it off it won't power down. Does anyone know how I can get it to power down?

SOmetimes you just have to wait a few seconds after pausing it and/or removing it from the dock before shutting it down. This is normal. If it still won't shut down after ten seconds or so, you might try holding the MENU and SELECT (center) buttons until you see the Apple logo to reset it - then see if it'll shut down.
Cheers!
-Bryan

Ipod won't power down

I can't get my ipod to power down. It's constantly staying on, draining the battery. It won't power down automatically or manually by holding down play/pause.

I found another question and answer about the same issue, and was able to correct the problem.

Muvo T200 Won't Power down or pause

I bought a muvo t200 for my husband for his birthday (as a match to my own). Aftger upgrading the firmware to .03.03 it will turn on, but won't pause or power down. About one in three times, pressing the power down button causes it to either skip to the designated shortcut or go to the options. the rest of the menu seems to be working ok.
Any suggestions?
Thank you in advance for helping out!
- Clarinda

Can you try resetting it to see if that helps?
Insert and remove a straightened paperclip from the Reset Hole.
If this does not work, you probably need to format the player.
WARNING: This step deletes all your player's content. If possible, back up all your player's content on your computer before proceeding.
1. Make sure your player is connected to your computer and you are logged on in Administrator mode. For details about Administrator mode, see your operating system's documentation.
2. In Windows Explorer, right-click your player and select Format.

5th Gen 60G Won't Power Down-NO SLEEP

My 5th gen 60g's are not powering down, the backlight will go off, but they will NOT power down! I've reset, re-installed and used factory defaults, but they still drain down the battery because they WON"T SHUT OFF

I'm looking into the same problem. A friend has a 5G 30GB video that's having insomnia. I've restored it a couple of times using itunes 8.0.1, and the firmware is version 1.3.
It's got a few problems. One is that it won't go to sleep by itself at all. If I enable the sleep menu option and select it, it "sorta tries to" go to sleep - i.e. the clickwheel stops responding but the screen stays on (if the backlight is set to "always on" then that also stays on). The clickwheel stops responding to swizzling until I press a button.
Also, when I do a reset (hold down center/menu buttons) it forgets all the menu and clickwheel settings when it reboots and even asks me to choose the language again. I believe this only started happening in the last couple of weeks. I don't know if a firmware upgrade triggered it.
It's chewing up the battery very quickly the way it is. I've loaned the owner my old 20GB photo for the time being and this one will sit on a charger until a solution appears
I hope someone at apple spots this and writes a patch!
Thanks
Matt.

Macbook won't power down

Bought a brand new Aluminum Macbook 4 days ago, and it worked perfectly for the fisrt 3 days, but today it has decided to not power down or let me log off. When I try to shut it down, it acts normally at first, closing out all my open apps but then it just does nothing and won't turn off.

Have you tried holding down the power (on/off) button to force shut down?

4S won't power down only go to sleep mode.

4S top button won't power off only go to sleep mode.How can I power the phone down?

Thanks - Sometimes this works and then it doesn't always do the trick. I wonder if there is a combination of buttons that could be pushed to shut the phone down?

RAID won't power down and then lost one of the 2 drives

I tried to power down my RAID before leaving the studio last night and it would not shut down. Both RAID drives were functioning when I shut down my G5. I didn't shut down power to the RAID for fear I might corrupt or lose some files.
Now one of the two drives (the lower one I think, labled Drive 2) is not mounting. I still haven't unplugged it. What should my next step be? HELP!!
Thanks in advance.
Dual G5 Mac OS X (10.3.9)

Hi Brian,
1) If you don't have a good backup policy, this should spur you to ensure you have one. You should ALWAYS have a backup policy, even with protected storage like Xserve RAID. Heck, large organizations have full offsite backups of their data on multi-million-dollar EMC Symmetrix and IBM Shark systems. Back up everything you can't afford to lose at a moment's notice.
2) Once you have a backup, you may wish to upgrade to the 1.5 firmware, if you haven't already done so.

My 5 won't unlock and it also won't power down

My 5 won't unlock and it also won't power down

iOS: Not responding or does not turn on - Apple Support

MG6220 Randomly Goes Offline, Won't Power Down Correctly

Connected wirelessly. Printer goes offline for all PCs in my LAN. Attempting to power down printer with power button results in the printer endlessly displaying message "powering down, please wait" but printer never shuts down. Manually unplugging the printer and turning back brings the printer back online. Did not see any similar threads on this site. Any help appreciated. Thanks

Connected wirelessly. Printer goes offline for all PCs in my LAN. Attempting to power down printer with power button results in the printer endlessly displaying message "powering down, please wait" but printer never shuts down. Manually unplugging the printer and turning back brings the printer back online. Did not see any similar threads on this site. Any help appreciated. Thanks

IPhone 4s won't power down

Recently I have noticed that my iphone will not power down. I go to turn it off and it goes through the process of shutting itself down and then after two seconds magically turns itself back on again. After this happening several times I have tried pretty much everything to fix it. I have tried resetting the settings, deleting data and settings, full restore and cleaned out the charging port but all to no avail. The problem continues. Has anyone actually had this problem fixed? Would be nice to be able to power my phone off, especially with filights to catch in the near future.

https://discussions.apple.com/thread/4055724?start=0&tstart=0

G41M-P34: Won't power down

Replaced old ASUS board w/ G41M-P34. Works fine, but every power down or hibernate turns into restart. Probably something simple I'm overlooking, but I'm stuck. Help!
MSI G41M-P34
Celeron E3200 @2.40 GHz, dual
BIOS: American Mega Trends v.25.6, SMBIOS: 2.5
Window 7 Home Premium 64-bit , Service Pack 1
NVIDIA GeForce 8400 GS
WDC WD1001FALS-40U9B0 ATA, 1TB
HL-DT-ST DVDRAM GH22NS40 ATA
Corsair TW3X4G1333C9A DDR3 2X2GB 1333MHz
Acer X203H

1. Right click all the way down left: Start Menu >Properties>Start Menu>Power Button action
2. Left click all the way down left and type 'Power Options'. On the left side you have 'Choose what the power buttons do'
3. Left click all the way down left and type 'Power Options'. Click on whichever 'Change plan settings' then click 'Change advanced power settings'.
You have '+ Power buttons and lid' there and be sure to check for all power plans (Balanced, Power saver, High performance ...)
For some reason 'Power Options' in Win7 are horribly designed, so you have to go and check all these options :(

Quicksilver won't power down w/Leopard

After installing Leopard on my Quicksilver (w/GigaDesigns dual 1.8 processors), when I go to shut down or restart, the screen clears as if to power down, but the the spinning (whatever it's called) keeps spinning and I eventually have to hold the power button in to shut it down. It restarts okay. Even in safe boot, the same thing happens. Suggestions?

An archive and Install is not the same as an erase and install. The archive is great cause you get to keep all your settings and not re-install apps. but it can also bring problems to the new install that were present in the previous OS.
If you cruise the Leopard Usage forum you'll see suggested, time and again, if you are having issues with Leopard to do an erase and install. That means backing up and re-installing apps; basically starting over. I would Zero Out Data too to map out any bad blocks on the drive. Let us know if you need help with the Erase and Install. Beware, these procedures will totally wipe out everything on your drive.
Note; also make sure every app. you have on the Mac is able to run using 10.5 and get rid of every haxies you have. If you are using apps. from Versiontracker.com, go there and find the updates if they are available.
I would re-post in the forum I linked if you still have troubles after all this.
DALE

IMac Second Display won't power down

I've added an LG 20" widescreen as a second display for my 20" Intel iMac (white). When the iMac sleeps or powers down, the LG display goes blank but not black, power button remains on and a "check signal cable" message displays.
A second problem is that I've been trying to get the two displays to look the same, color-wise. The color match option under displays>color gets it close, but that option has disappeared from the list of choices. Before, I could choose from the LG color settings as well as several generic choices (Color match, Adobe RGB, etc.) Those other choices have gone away. The calibrate option is still there. I just upgraded to Leopard. Did that have anything to do with it or was it just a coincidence?

Have you checked the Energy Saver settings? System Preferences / Energy Saver.
If the settings are what you want, you can try this. Change them to anything at all then change them back to what you want. The restart the computer and reset the PRAM.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Won't power down

Similar Messages

Maybe you are looking for