Work center problem

Hi Friends!
I have one dought in work center.I have 10 macines entered in place of individual capacities.so system calculate the capacity planning for 10 mc.Some times i will send 2mc for engineering department regarding for repairing.but next when run the mrp system will calculate the capacity for 10 mc.but i want only 8 mc.Is there any solution for solved this problem.
Thanks
venkat

Hi Venkat,
Is Plant maintenence module implemented in your industry , if it is Implemented when ever the work center is under maintenence i,e when a maintenence work order is there , then there are some customization settings are there which blocks the machine for production this will obviously show the remaining capacity of the machines which are available for production .Let me know wheather PM module is implemented or not .
Regards,
Mallikharjun.

Similar Messages

CR10----WORK CENTER CHANGE DOCUMENT PROBLEM

HI FRIENDS,
CR10 SHOWS U THE CHANGE DOCUMENT FOR WORK CENTER.
I HAVE ALREADY TICKED THE CHECK BOXES IN OP40 TO REFLECT CHANGES MADE IN WORKCENTER TO THE DOCUMENT SHOWN IN CR10.
NOW MY PROBLEM IS WHEN I M CHANGING DATA IN ANY FIELD IN WORKCENTER ITS NOT GETTING REFLECTED IN CR10.
THE DATA IS GETTING REFLECTED ONLY WHEN I CHANGE RULE FOR STANDARD VALUE MAINTENANCE. (FIELD NAME-----VGMXX).
WHAT SHOULD I DO SO THAT DATA WILL REFLECT IN CR10 WHEN I CHANGE ANY FIELD IN WORK CENTER.
PLEASE GUIDE........

Dear Nitin,
Sorry for thge late reply.
Please follow the link below.
http://help.sap.com/saphelp_47x200/helpdata/en/b1/c0384f439a11d189410000e829fbbd/frameset.htm
You can do this with the help of ABAPPERS.
Regards
Kannan
Reward if useful.

Problem in creating work center using bapi

hai all,
i am creating work center using " CRAP_WORKCENTER_CREATE ", it is also getting created successfully when I try to check CAPACITY for capacities and scheduling it is giving a error called.
" in table T006 entry is missing " . why it is comming like that.

Hi Goutam/Ram,
    I am trying to create capicity . I am useing CRAP_CAPACITY_CREATE .
   But I am getting so many errors. Is it the right Bapi or do know any other BAPI.
   We are trying to copy Capacities and work center from one plant to other.
Plz send if you any documentation or code. Also send work order creating code.
Thanks in Advance.

Work center hierarch cumulation problem

hi
I am trying to cumulate capacity requirement from 3 work centers...I created a work center hierarchy as below steps but I cann't see the cumulate result..it prompt no available capacity requirement or work center exist..anyone knows what I should do next?I can do capacity leveling/evaluation,so I think my IMG setting is good..i searched the SDN forum but no workable solution for me..
thanks.
Create a new WC (in CR01) as category 0004. This will be the top level WC in your hierarchy.
Create a hierarchy (in CR21).
Add your 5 lathes and the newly created top level WC to the hierarchy (in CR22). This can be tricky: the WC you just created must be the top level, the other 5 must be under it.
Pull the capacity data (in CM01) for the hierarchy: go to settings, hierarchy, check the cumulation of requirements and capacities and type the hierarchy name.
Route things as before, to the original 5 lathes.

Hi ,
Dispatching is used to allocate or schedule the planned orders in the work center/resource.
We can use CM25 transaction-Graphical planning board for dispatching.
Planner can assign /dispatch the planned orders manually here. He can see graphically the planned orders overload work center which are dispatched with other.
Using cm21 you can do capacity levelling graphically or using cm22 can do cap levelling using tabular column.I feel using this would be easy.
Regards,
R.Brahmankar

Estimated Start time in notification based on Time defined in Work center

Hi,
Following Satish post- I am trying to find solution to the same problem so i will appreciate any advise.
When the notification is created ,the estimated start time should be based on priority .This in iteslf is pretty straight & simple. However if the reported time is after work hours or towards the end of work hours or weekends , the estimated start time should be reflected accordingly based on factory calender & work center time schedule.
In other words the estimated start time should fall within the window of work hours available.
Example:
Presume the the working hours for the Organization are 8:00AM to 5:00 PM & a call comes for service at 4:00 PM. Also say , for high priority the defined response time is 5 hours. In such a instance the estimated start date should be set to next day at 11:00 AM.
Appreciate your help for the configuration that need to be done
Shirly

Hi,
I think ur talking about notification malfunction start time .. currently it just takes the system date and time by default .. and if you need work center timings i believe first u need the eqpt /F.loc to get the work center data in notificaiton ...
I think u can get these dates can be modified while saving by using user exit : QQMA0014 QM/PM/SM: Checks before saving a notification or BADI IF_EX_NOTIF_EVENT_SAVE , but at the same time the eqpt or F.loc have work center details in master record ...or work center needs to be entered manually in notification ..., pls check up ..
regrds
pushpa

Work center change in Service order not happening

Hi Experts,
I am facing a problem when i try to Call a function module in update task where the Function module contains a call to BAPI_ALM_ORDER_MAINTAIN without COMMIT WORK.
This is done in order to update the Work Center while there are changes to the Warranty Status of the Repair Order.
So , i have written the Code in the Userexit_SAVE_Document so that the Update gets done.
But there might be problems when the Repair order does not get saved.
So keeping that scenario in mind, I tried using the Update task Function Module in which i wil lbe calling the BAPI for Changing/Updating the Service order.
BUT , The Change is not getting reflected in the Work centre of the Service order.
Thanks
VIJAYB
Edited by: Rob Burbank on Jun 5, 2009 10:10 AM

Hai experts,
i have found the way to do the work center change in update task method .
I did call the BAPI_ALM_ORDER_MAINTAIN but without using COMMIT since this function module is called in Update task method so whatever is the change being done by that BAPI will be reflected in the Service order once the Update task has been done for that service order.
Thanks and regards,
VIJAYB.

IW41: automatic update of activity type when changing the work center?

Hello colleagues,
when doing a time confirmation with IW41, we have following problem:
In the PM order the operations are assigned to a neutral executing work center, as it not known which individual technician is completing the operation later on.
Now when the individual technician is entering the time confirmation with IW41, system is proposing the work center indicated in the operation from the PM order, then technician is overwriting the work center proposal with his own individual work center ID (and pressing Enter), but the activity type is not getting updated automatically. So the technician must jump to field "activity type" and choose the correct activity type.
Is there any solution (hopefully with user exits!) to have the field "activity type" automatically updated with the one indicated in the work center, which was entered manually?
Thanks for your ideas!
Regards,
Patrick

Hi Maheswaran,
yes, as usual all PM work centers have only 1 activity type assigned in the costing tab.
We also checked the settings of the activity type (KL03), but we just found one difference: the price indicator was set on 3 "Determined manually" - we've changed to 1 "Plan price, automatically based on activity" (..same setting as for the act. type of the work center with working update of act.type).
We tested already all possible constellations and scenarios, but we have not found any good reason for the behaviour.
Thanks for your efforts so far!
Patrick

Block production work center during maintenance order

Dear Experts,
iam trying to do the integration between PM and PP, I want to block the production work center from any production order when there is any maintenance order opened for a certain equipment which is inside this work center ,
till now i did the following:
1) the production work center is now inside the equipment location tab
2) when i open any maintenance order i put system condition as zero
now what i only achieved ,
- in transaction CM25 the capacity is black for the period of the maintenance order
BUT the work center is not blocked and any production order can be created without any error
please help and much thanks in advance
Best Regards

Hi,
Till time you have performed right things to integrate PP-PM & system is also responding according to setting.
Showing block capicity in CM25 against the Maintenance Order.
If you want to block production order as well, you need to do one more setting.
go to t- code OIOI, selection Production order types (those you want to block) & in capacity Availabilty choose Collect conversion as 3 : No creation if there is insufficiant caacity.
i hope this will definately solve your problem.
- Yatharth

Urgent ! Help in linking Work center to goods movement

hello,
i need help in finding the work center for the goods movement in AUFM. The goods movement AUFM table shows all the goods movement entries but i want to tag it to the corresponding work center. i found out a way to tag it. by linking AFKO - RESB - AFVC - CHRD. But the problem is that if the material on the production order is the material that is finally produced, i cant find a work center for it. Because this material has no entry in the RESB table.
Any suggestion would be highly appreciated.
hey everyone
is there a way to have the VORNR field connected to the AUFM goods movement. this will solve the problem of linking the work center . So if someone knows how to link the AUFM entries with the respective VORNR activity ? Please give suggestions.
thanks
Laura.
Message was edited by: Laura. 3:20 PM
laura s

Laura,
Goods issues are linked as you described because components consumed by a production order have reservations (RESB) and are assigned to an operation (AFVC). Goods receipts, on the other hand, do not have reservations and therefore don't have this link to the work center.
If you are using automatic goods receipt, then one of the operations in the production order will have a control key set up for automated goods receipt (PP03 is the standard, and it's usually the last operation). The business would likely see this work center as being logically tied to the goods receipt of the produced material.

Work Center displaying wrong in CO14 Transaction

Dear Experts
We are facing a Problem at time of Confirmation Through CO11N,Under work center field there are 2 fields Current to Confirm & Planned to Confirm,user is entering same Work Center in both fields,But when we save the confirmation & check in C014,we are seeing in Current to Confirm field some Other work center which is not there in Routing.
From where system is picking this work center.
I am not able to understand.
Is this a customisation issue,Or a Master data issue.
Regards
Sandeep patil

Hi Sandeep,
Planned to confirm work center is Production Order work center
Current to confirm work center is actual running work center (becase due to some reason for doing other work center)
To Check confirmation parameters (SPRO)
OPK0 (may be included Details area 0410 or 0420)
Regards,
Sankaran

Buyer Work Center Document Builder Error in Purchasing

Hi Gurus,
I am getting this error in BWC(Buyer Work Center) for PO's which can be updated by using Requistion Tab choosing update in document builder for existing PO's.
next sequel number is not populated in update document builder page for PO's. did any one faced this kind of problem. This is not happening with all of the user systems, only with few that's wierd.
Navigation:
Purchasing Super User >> Buyer Work Center >> Requisition
Here selecting requisition number to be added/updated to existing PO's. once we do "Add To Order" update for PO in document builder.
Immediately throwing an error below, actually it should take next line to existing PO, its not happening.
*"You cannot combine this line with another line because the Item Numbers are different."*
What would be cause for this, I tried in Metalink oracle support to find something on this, But No luck.
Please advice, what steps to be taken to resolve this.
Thanks to all..

user8822881 wrote:
Hi Gurus,
I am getting this error in BWC(Buyer Work Center) for PO's which can be updated by using Requistion Tab choosing update in document builder for existing PO's.
next sequel number is not populated in update document builder page for PO's. did any one faced this kind of problem. This is not happening with all of the user systems, only with few that's wierd.
Navigation:
Purchasing Super User >> Buyer Work Center >> Requisition
Here selecting requisition number to be added/updated to existing PO's. once we do "Add To Order" update for PO in document builder.
Immediately throwing an error below, actually it should take next line to existing PO, its not happening.
*"You cannot combine this line with another line because the Item Numbers are different."*
What would be cause for this, I tried in Metalink oracle support to find something on this, But No luck.
Please advice, what steps to be taken to resolve this.
Thanks to all..Please see if (nable To Combine Multiple Requsition Line Into Single PO Line After Release 12 Upgrade [ID 1472044.1]) helps.
Thanks,
Hussein

Shift sequence query in PP work center

Dear All,
I am having one problem while maintaining shift sequence in work center. I have maintain all config settings in OP4A shift 1 shift 2 shift 3 but when I create work center and select shift sequence, it is only taking shift 1 and not all 3 shift for all 7 days.
Can anyone tell me the solution?
Thanks in advance.
Regards,
Max

Dear Santosh,
Thanks for the valuable inputs.
I have created following sequence in OP4A.
1, Create a Group eg. CB
2.Create a shift definitions like SHIFT1,SHIFT2,SHIFT2, START/END DATE, START/FINISH TIME OF SHIFTS, NO BREAKS ARE THERE and assign it to group.
3. Define individual shifts SEQUENCE DAYWISE wrt to groupo.
4..Assign grouping in capacity header of work center.
5.Now go to add interval option and create a new version of capcity which contains desired shift sequence from the shift group assigned.
7. assign proper valid froma and valid to dates.
8. In capacity header screena ssign the newly created capcity vesrion as active vesrion.
BUT STILL i WILL ABLE TO MAINTAIN ONLY FIRST SHIFT SEQUENCE FOR ALL 7 DAYS.
SYSTEM IS NOT SHOWING 2ND AND 3RD SHIFT.
PLEASE HELP ME OUT.
THANKS
MAX

Table Link for EQUNR (Eqpt Number) and GEWRK (Main Work Center)

Hello,
I need to fetch the main work center from equipment master. I need a direct table link between the equipment number and mainwork center. We are getting a link of equipment number (EQUNR) to work center (ARBPL) and a link of work center (ARBPL) to main work center (GEWRK). But the problem with this scenario is - main work center is not getting fetched from equipment master once work center is missing.
We want a direct link through some table between EQUNR and GEWRK.
Puneet

Hi Puneet,
Appreciate your problem !
Many a times in such a situation (which I presume exists where no direct link is available between fields); we have 2 clear cut approaches -
Approach 1:
Develop a SAP Query, Functional Area/Infoset, and User Group ( using T code :SQ03,SQ02,SQ01 respectively )
While developing Functional Area feed in these 2 tables (Table 1- equipment number (EQUNR) & work center (ARBPL) and Table 2 - work center (ARBPL) to main work center (GEWRK) with work center (ARBPL) as the Primary Key- bridge to join these 2 tables.
In SAP Query Development; you may take Plant as the Selection Field or any other field as per business requirement to make a search in the query.
Now when you execute this query, you will get a complete Download of (EQUNR),work center (ARBPL) and main work center (GEWRK) in one table.
For SAP Query, you may also approach your ABAP Team Member. This is a cleaner approach than the other one.
Approach 2:
Take SE16 download of the Table 1 and Table 2 and join them in Excel (using vlookup if required).This approach is however limited to the data volume that you have to process.
Please let me know, if you get stuck !
Thanks,
RAVI.

Work center deletion

Dear All,
I am deleting work center from CS02 transaction..this work is new and not in used...My problem is it is taking more than half day to delete this work center.
I tried from deletion/archiving with PP_WKC but it is showing no data is selected.
What would be the reason for taking much time. Has anybody tried this successfully ?
Regards
TAJUDDIN

Dear TAJUDDIN
are you currently using the work center already in some existing tasklists or does it have any open production orders or other places where it is being currently used,
or maybe there could be a background job which is scheduled that is probably using the workcenter at the time when you tried to delete it
or your server must be experiencing some downtime
so maybe that could be the reason why, but normally i guess it should not take more than a couple of minutes at the maximum
i am unable think of any other reasons,
hope you can find out the cause and let us know the reason
thanks
regards
chakri

Wrong Work center picking up Time sheet

Hi
Scenario is as follows:
Earlier Employee has HR assignment to one Work center 1 -WC1
Later, Employee was Assigned to Work center 2- WC2
Problem: When booking time sheet in CAT2 , for service order, WC1 was picking up, even though in Service order WC2 is assigned.
We have deleted the Employee HR assignment from WC1 , but still in Time sheet WC1 is coming.
Please suggest.
Thanks.

Is it possible for anyone to tell, from where the work center is being picked up in CAT2. We are processing time sheet booking for service order. The work center in service order is something different than what is picked up in CAT2.

Work center problem

Similar Messages

Maybe you are looking for