Work centre formula?

Hi
     what are the impacts of formula we used SAP0,SAP008,SAP004 in creating maintenance work centre.If we do not use these
     formula what will be the impact.
regards
sanjay

Hi,
Formula SAP008,SAP004 are used in plant maintenance,customer service & Project network kind of scenarios.
kapil
Edited by: Kapildev Farakte on Dec 22, 2009 5:35 AM

Similar Messages

  • WORK CENTRE IN EQUIPMENT MASTER DATA

    Hello All,
    In IE01 tcode > creation of equipment , pls tell me what is the relevance of work centre in location tab ??
    Thanks,
    Sunny

    Hi
    Work Center
    Definition:Operations are carried out at a work center. In the R/3 System work centers are business objects that can represent the following real work centers, for example:
    Machines, machine groups
    Production lines
    Assembly work centers
    Employees, groups of employees
    Use
    Together with bills of material and routings, work centers belong to the most important master data in the R/3 production planning and control system. Work centers are used in task list operations and work orders. Task lists are for example routings, maintenance task lists, inspection plans and standard networks. Work orders are created for production, quality assurance, plant maintenance and for the Project System as networks.
    Data in work centers is used for
    Scheduling
    Operating times and formulas are entered in the work center, so that the duration of an operation can be calculated.
    Costing
    Formulas are entered in the work center, so that the costs of an operation can be calculated. A work center is also assigned to a cost center.
    Capacity planning
    The available capacity and formulas for calculating capacity requirements are entered in the work center.
    Simplifying operation maintenance
    Various default values for operations can be entered in the work center.
    Look at CR01 ,CR02,CR03 Transaction
    table : CRHD Table
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • How to Create New Activity Type  for Assiged to work centre Costing in Acti

    Dear Sir,
    We have four activity type to assigned in workcentre Costing Activity. Details are as under
    AIRJET     2010     AIRJET
    DONIER     2010     DORNIER
    SULTEX     2010     SULTEX
    SULZER     2010     SULZER
    in addition one more loom is comming in our unit and require new activity type.
    How can i create new.
    Please guide.
    Thanks in advance
    Regards
    Ajit

    Dear ,
    To create new Activity Type  , you need to follow the below steps :
    KA01 - Create Primary Cost Element for the new activities type.
    KL01 - Create Activity Type tied to the primary cost element. 
    KP26 - Change Activity Type/Activity Price Planning - maintain the Variable price
    Assign the activity type to cost center using T code KP26.
    In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal Year as 20xx.
    Click on Overview tab on top and key in costing details in this screen.
    After performing this ,while creating the work center ,this combination of activity type & cost center should be assigned.
    At work centre level , you should have
    1.Create Standrad Value Key -OP19 and Formula Key in OP49.
    2.Create Formula Parameters in OP7B or u can use existing one to assing in the Standard Value Key
    3.In CR02-Assing the Standard value key in Basic Data  and select the Formula Key in Costing tab with cost centre assingement .Save
    Try and check
    Regards
    JH

  • Activity type in work centre

    Hi,all,
    I have a requirement as mentioned below-
    I have certain pm work center like engineer,fitters.But under engineer i have 3 different activity type like Sr.engineer time,Asst.engineer time,Jr.engineer time.I have assigned all these 3 activity type in my work centre in cost tab page along with standard formula SAP008.Now , my requirement is when I assign this work center in my equipment or maintenance order ,in operation tab pages of maintenance order ,only these three activity type should flow from where I want to select my relevant activity type.But instead of this,all the activity type around 10 nos whatever defined by CO consultant , is flowing to my order from where i need to select.I want only those 3 activity type which I had defined in my work center.can anybody please explain how to fulfill my requirement.thanks in advance.
    rgds
    rajib

    hi
    you can make the default cost element by creating the external profile in IMG and assigning to the order type ,also in easy access screen during order creation you can mention as default values in the menu Extras>settings>default values
    As per what cost element has to be specified kindly consult with the CO team,regarding the mandatory field may be you have specified the fields as mandatory in IMG settings,kindly check
    regards
    thyagarajan

  • Querry regarding work centres

    hi guys
    1. anybody plz explain the concept of standard values that are maintained in workcentres and how they are calculated when work centre is assigned to operations in order.
    2 any doc regarding costing of orders ?
    regards
    pushpa

    hi pushpa
    satandar values are used for calcualtion of time spend for partcular workcenter ,for example if it is machine category you will create standard value which contains setup,machine and labour which contains the formula for calculating the execution times for that particular activity.
    setup-15min
    machine-30
    labour-15min
    then the system will calculat the price based on the planning in KP26
    for PM point it is basically NO STANDARD VALUES,hence you have to specify only the activity type in the costing tab page ,cost center and the formula for calculating the times
    regards
    thyagarajan

  • In work centre

    dear sir when i am creating work centre .in capacity categories  i am puuting machine. . but it show s capacity of type 1 and 2 are only for resourses. how i will solvea and also in scheduling capacity what i will put.
    please tell me step bye step procedure

    Hi,
    Please check in OP40 for category 001 where you must assigned Status profile (Resousce) remove it. and check the its application and  maintain R-Routing there.
    In scheduling u need to maintain the capacity category and scheduling formula.
    Hope it will solve your issue.
    Regards,
    R.Brahmankar

  • Pm querry regarding work centre

    hi
    1.any one plz tell me about formulas and how they are given in work centres and related parameter settings for formulas.
    regards
    sharath

    For standard as Thyagarajan said..
    Capacity - SAP008
    Scheduling - SAP004
    Costing -  SAP008
    Formula in Workcenter:
    http://help.sap.com/saphelp_erp2004/helpdata//EN/b1/c03348439a11d189410000e829fbbd/frameset.htm
    Hope this helps-

  • What is Work centre

    Can u let me know what is Cost Centre / Work Centre ?
    What is the difference between production order / process order
    Thanks in advance.

    Hi
    check info given BY sap to clear ur doubt
    Definition
    Operations are carried out at a work center. In the R/3 System work centers are business objects that can represent the following real work centers, for example:
    Machines, machine groups
    Production lines
    Assembly work centers
    Employees, groups of employees
    Use
    Together with bills of material and routings, work centers belong to the most important master data in the R/3 production planning and control system. Work centers are used in task list operations and work orders. Task lists are for example routings, maintenance task lists, inspection plans and standard networks. Work orders are created for production, quality assurance, plant maintenance and for the Project System as networks.
    Data in work centers is used for
    Scheduling
    Operating times and formulas are entered in the work center, so that the duration of an operation can be calculated.
    Costing
    Formulas are entered in the work center, so that the costs of an operation can be calculated. A work center is also assigned to a cost center.
    Capacity planning
    The available capacity and formulas for calculating capacity requirements are entered in the work center.
    Simplifying operation maintenance
    Various default values for operations can be entered in the work center.
    The following graphic illustrates the use of work center data.
    Use of work center data
    Structure
    A work center is created for a plant and is identified by a key. The work center category, which you define in Customizing the work center, determines which data can be maintained in the work center.
    The data is grouped thematically together in screens and screen groups. Examples of such screen or screen groups are:
    Basic Data
    Assignments (to cost centers, Human Resource Management System (HR))
    Capacities
    Scheduling
    Default values
    Hierarchy
    Technical data
    Integration
    Task Lists
    Work centers are assigned to operations in task lists. If you change default values in a work center, the changes are effective in the task list if a reference indicator has been set for the default value.
    Work Center Hierarchies
    Work centers can be arranged in hierarchies. These are important in capacity planning. You use hierarchies to cumulate available capacities and capacity requirements in a hierarchy work center.
    Assignments to Objects in the Human Resource Management System
    A Logistics work center can be assigned to either an organizational unit or a work center in the Human Resource Management System (HRMS). Assignments to other HR-objects, for example employees or qualifications, can be maintained via the HR work center.
    Vishal...

  • Work centre capacity utilization

    Dear guru ,
    i have a work centre that always work in the same moment for 3 different production order.
    If my total daily available capacity is 11 hours for my 1 individual capacity is right that I assign to the work centre a capacity utilization of 300 percent in order to have a daily available capacity of 33 hours and I can use capacity levelling in the best way ?
    Or there is other better solution for solving this problem ?
    Thanks for your help.

    you can also put no. of individual capacity as 3.

  • Creating/Copying a Work Centre,also a Production Scheduler and Cost Centre.

    Hi All,
    I am trying to create a new work centre based on the settings of a previous one? First of all,how I can do this?
    Secondly,after I have created the new work centre (having copied being copied from another),I need to create a new production Scheduler and Cost Centre? How I will be able to do so,also?Will the Production Scheduller and Cost Centre assignments fom the old work centre be copied,too,or I will need to create/copy these from scratch?
    All help greatly appreciated,will award points to all useful answers.
    PAPJ1.
    Edited by: PAPJ1 on May 20, 2011 11:01 AM

    Hello,
    You can create a new work center by copying an existing work center. in the cr01 screen in the copy from column put the plant name and Ref. work center name and put enter. all the existing data will be copied to the newly created work center. no need to create new assignment to  Production Scheduller and Cost Center.
    Hope it helps.
    Regards
    Alok

  • Work centres for employee of more than one plant

    Hello experts
    I have a question regarding work centres. Our department is managing a pool of workers which consist of employee from more than one plant. Somebody had made experience concerning this issue?
    Furthermore we have to manage external workers as capacity. How can I build up this in SAP?
    Best regards

    >
    > I confused plants with company code.
    >
      This bit difficult for me to decide and say something.
      Depends on the business requirement and business process and legal statuses it will be decided.
      some time plans can also be company 'codes'.
      if the management wants to differentiate plants in financial terms plants may become company codes.
    >
    So we have employees of different company codes which get managed by one department manager. Is that possible to make one work center so that we are able to manage them together. Seems infeasible.  So we have to create for every company code one work center, but we never have an overview of our total workers...
    >
    One thing you need to get clarified here. Company is a separate legal entity.
    if you want one employee to work in different companies on different assignments you support use (MGE and CE concept)
    >
    > If he/she working in two different site we can manage the situation with dual reporting concept.
    > and with:
    > For cost center you can always use cost center split. while posting to FI/CO.
    >
      Dual reporting is to manage the people.
      Cost is for final analysis ( where employee work how much incured, how much profit/loss earned)

  • Restricting the change of workcentre in CO11N to selected work centres

    Dear PP Gurus,
      I have included the following screen
    0420: Personnel: incl work center and posting date  in the confirmation profile, so that the user can change the work centre at the time of confirmation. However the user wants that there should be a check where in only the workcentres which are used in parallel to be allowed for the perticular operation.
    Please guide how to achieve this? Can we have a check thorugh any of the user exit below:
    CONFPP02  PP order conf.: Customer specific input checks 1
    CONFPP03  PP order conf.: Cust. specific check after op. selection
    CONFPP04  PP order conf.: Customer specific input checks 2
    CONFPP05  PP order conf.: Customer specific enhancements when saving
    Eg.
    For operation 0020 the user may perform the confirmations on Weld1 /Weld2 /Weld 3 machine. Now the system will allow to select any work centre other than these three. That may lead to wrong confirmation. The user wants to restrict the work centres to be selected to these three only. These three machines are mentioend as parallel sequence in the routing.
    Regards
    Ankush

    Hey..
    How did u resolve this? i have the same kind of requirement and getting the same error as direct navigation not allowed.
    Can you please let me know. It's urgent.
    Thanks,
    Mahesh

  • How to assign work centre in OM

    Hi,
    In organizational structure how to assign work centre.
    it is necessary to assign cost centre to org structure.how ?
    President has to be given personnel no.?
    if employee is reporting to two superiors of different depts or different regions ,how the employee should be placed i.e dual reporting?
    Urgently reply.
    Thks
    Archana

    Hi Archana,
    1. To assign Work Center the T-code is PO01.
    2. Yes. In SAP HR every employee has to be given Personnel Number irrespective of their designations.
    3. No its not possible according to me (Gurus Pls correct me too if I am wrong)
    Hope above answers are helpful to you.
    Regards
    Pavani
    Remainder: Points to be given on answered.

  • Working day formula that excludes weekends and holidays in WEBI

    Hi Guys,
    Can we calculate a working day formula that excludes weekends and holidays in WEBI OR in Universe?
    The universe I am working on is using stored procedures, so there are no joins or modelling done. Although there is a workday stored proc  that I can bring in the universe.
    I am just thinking if there is no modelling or joins done in the universe how will this help me in webi?
    Your suggestions will be very helpful.
    Thanks,
    Jitan

    One more suggestion I need from you  -
    I have a Work_Calendar_VW that has the following columns -
    Calendar_Date - 5/1/2014
    Calendar_Year - 2014
    Calendar_Month - 5
    Calendar_Day - 1
    Work_Day - 1
    Day_Type - WD (Work Day)  For Weekends this will be displayed as WE
    The columns have all dates for current year in SQL Server.
    I am going to pull this into the universe and create 2 derived tables to calculate MTD Day counts.
    Derived Table 1  - Calculate Yest Work Day... this will remove all the weekends and holidays and give me the last working day. This includes couple of case statments to check each day if it's a working day or weekend.
    For Work Day the above code will be 1 and for weekend 0
    Derived Table 2  - This will give me the count of working days in current month using the above view and Derived table 1 Below is the code  -
    SELECT COUNT(*)
    FROM Work_Calendar_VW
    WHERE [Work_Day] = 1 AND
       (Calendar_Date BETWEEN CAST(CONVERT(VARCHAR(25),MONTH(LastWoringkday()),101) + '/01/'
       + CONVERT(VARCHAR(25),YEAR(LastWoringkday()),101) AS DATE)
      AND LastWoringkday()).
    I cannot do joins because this universe has been built using stored proc and would like to implement this in BO universe.
    let me know if this is the right approach.
    Thanks,
    Jitan

  • Work centre change in production order

    Hi,
    During creation of production order, i want  to change the work centre if in the existing operation, that particular work centre is overloaded.
    Could any one let me know what are the steps involved in it.
    Re

    Hi,
    Goto CM25 & select the Overload workcenter &  underload workcenter .
    Inside the planning tabel select the Operation  from "Order (Pool) tabel"  and drag manually to the "under load workcenter " displayed in  upper table (workcenter) for required date. Now the operation workcenter has become changed & rescheduled.
    Regards
    Pradeep

Maybe you are looking for