WRT54G v3 and BEFW11S4 Problems
It started off like this. My WRT54G Suddenly Bricked on me out of the blue. I dont know what caused it. So i hooked up my old BEFW11S4 to find a way to unbrick the Wireless G And i remembered it had the same wireless settings as the Wireless G. the Wireless was working fine For a while but it started timing out. so i get on the computer thats hooked up to the router via ethernet and i noticed the act/link light was blinking at a rapid rate but windows(vista) was saying the connection had little to no connectivity and couldnt ping the the Router. So i reset the router and it was acting wierd the Power started blinking and thats all, then i held the reset button even longer, but it came back on so i set everything back up and I quickly looked for a way to fix my wireless G, and it worked i got my wireless G back working. I set everything back up changed the router password, SSID and set it not to broadcast because I thought someone got into my router and started changing things. After a few hours the wireless G started acting strange again so reset it and it started Restarting By its self while the Powerlight constantly blinks. i held the reset button untill Dmz light came on nad the router stopped resetting itself. so i used the TFTP program from the site and it said the flash was successful and the router stopped responding. (I had cmd window running ping -t 192.168.1.1)The router restarted and it went back to what it was doing before, constantly restarting it self.
I hooked the Wireless B back up and that rapid blinking activity light was bothering me so i restarted the computer while the computer was off the like was still blinking. so when windows finished starting up i changed the link speed 100mbps full/half duplex made the the router blink but it stopped when i set it to 10mbps full.
Is it possible that one of my computers is causing my routers to act strange?
Well try upgrading the firmware of the router & keep on holding tightly
the reset button in such a way that power light is blinking on the
router & then do a complete network power cycle i.e., unplug the power
cables from the modem & from the router & then plug in the power cable to the modem first once all the lights are solid green you could plug in the power cable to the router & check out it will definately work!!
Also,the advanced wireless settings to Beacon Interval=50,Frag
thres=2306 & Rts thres=2307 & then uncheck a Block Anonymous Internet Requests & it will definately work!!!
Similar Messages
-
WRT54G Language and conecting problem.
I have router Linksys WRT54G version 7. When I installing my router first time everything worked OK. When I installing my routers in my parents DSL link, it doesnt work. I gave this error message Step 9: Sender Error while upgrading the router's language pack I find in this forum, I tried 192.168.1.1/language.htm to upgrade language from routers CD in directory Pack/en_lang.bin. It gave me white window with black border without any text or buttons. When I try to read web based menu, I see only graphics and numbers without any text. I cant change anything. In step 10 : Router configuration error. Would you like to try again? and Unable to connect the Router. Check the cable connection from the computer to the router. Cables are OK, because internet on main PC works fine, wirelles I cant configure, I doesnt see menus. I tryed RESET button, my firmare is last official 7.00.4. Sorry for my english.
Basically, your router's firmware has been corrupted. With the same reason, the configuration or setup page is corrupted as well. This means that you cannot do a firmware upgrade by using the router's setup page (The one that you usually access through 192.168.1.1).
To solve this problem, you may need to download a certain application that will help you in upgrading the router's firmware instead of using the router's setup page since in the first place, it is corrupted.
You need to download TFTP.exe (The application that upgrades the firmware of the router rather than using the setup page) and finally the Firmware file that is downloadable from the Linksys website.
Dreamers* -
WRT54G: Pinging and Disconnection Problems
I have the WRT56G and both the wired and wireless connections are very weak. When connecting my computer directly into my cable modem, the connection is very fast and rock solid. For example when I ping linksys.com when connecting directly into my modem, the average latency is about 15ms. When pinging linksys.com using the WRT54G, the latency is a horrendous 3800ms. I've already swapped things 4 times already and every time is the same. Constantly getting disconnected from games, getting 404 errors when visiting websites.
(Mod note: Post has been edited for non-compliance of forum guidelines.)
Message Edited by primus on 11-19-2007 12:42 AMWell try upgrading the firmware of the router & keep on holding tightly
the reset button in such a way that power light is blinking on the
router & then do a complete network power cycle i.e., unplug the power
cables from the modem & from the router & then plug in the power cable to the modem first once all the lights are solid green you could plug in the power cable to the router & check out it will definately work!!
Also,the advanced wireless settings to Beacon Interval=50,Frag
thres=2306 & Rts thres=2307 & then uncheck a Block Anonymous Internet Requests & it will definately work!!! -
WRT54G Router and print problem
I have my desktop wired to the router. Laptop is wireless.
Desktop is always on so I want to be to print from laptop.
Running XP with firewall off. File and print sharing enabled.
Broadband internet works fine on both. But when I run
Network setup wizard I lose my internet connection on the
wired desktop. Have to restore on desktop to get it back.
What am I doing wrong?fscoglio wrote:
Workgroup names are same.
I set up shared folders on both computers.
Firewall is disabled.
I can ping laptop from desktop.
Laptop is 192.168.1.104
Desktop is 192.168.1.1 which is same as router? Is this correct?
Devices on the same network cannot have the same IP address. Since 192.168.1.1 is for the router, check the IP of the desktop and try to ping that.
"When you have eliminated the impossible, whatever remains, however improbable, must be the truth." -
Using the "Party" Menu and Having Problems?
There has been much discussion regarding problems with the "Party" Menu from the En Library. All sorts of problems, but the common aspect was this particular Menu.
Thanks to Jeff Bellune, we have looked closely at this Menu for any errors on Adobe's part. None have been found. The only possibility that Jeff, or I could see, was that the font used, Brush Script Std. might not be installed on all machines. This would trigger an error message in Photoshop, and ask permission to substitute that font for one that is installed. No problem, other than a substituted font. However, Jeff pointed out that Encore might have issues with a missing font, and not treat this in the same way that PS would. This is a bit of speculation, but in Jeff's case his "speculation" is much better than my "knowledge."
As for the font, it ships in the "Goodies" section on the installation disc, and should be included in the Functional Content with the downloaded version of CS3/CS4. It should also be part of the full install, though I suppose that there would be circumstances where it might not install automatically. If this is your case, just go to your installation disc, and locate the font. Use a manual install through Windows, or your OS. Now, this particular Menu should function perfectly. There could also be others, where the font might not be present on one's system. Again, the solution would be the same - install that font.
The only oddity that I found was that the Sub-picture Highlight of the first Button was turned ON. Not sure if this was just a mistake of Adobe's, or was maybe something that I did accidently. Either way, if you get Button 1 with a Highlight (star Shape to the left of the text), just go into that Button's Layer Set and make sure that it's turned OFF. That is the correct state for all Sub-picutre Highlights. The DVD player, or computer, will turn the appropriate one ON, when that Button is navigated to.
I think that I can safely say that there are no "gremlins" in that Menu. Besides checking out perfectly in PS, it functioned perfectly in En. Of course, I had that font installed, as did Jeff.
If any user finds any problem with that Menu, please post the complete and exact details on what you encounter and complete details on your version of En, plus the installation method and language of both the installation and the program. Those could be very important. More details are better.
Hope we don't see mention of the "Party" Menu, except that people used it with NO issues.
Good luck,
Huntwilllayb wrote:
i am using a wrt54g router and the modem is plugged into that wan port and i want to use a befsx41 router to add more ports for internet and to give some extra places to use internet on it. how would i get this to work because i have internet from the wrt54g router wired and wireless but the stuff plugged into the befsx41 doesnt work...
Hi
I Think u are missing something in between.
Follow the Magic Link , and observe the steps.
hope for gud .
pe@c3
"What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com -
WRVS4400N and WPC4400N Problems
This is part rant and part problem report.I don't know who's listening, maybe someone who knows more than I do.
Let me preface this by telling you I am a reseller of Linksys products and a Linksys Partner. I have had pretty good experience with the products. I am currently installing several of their products a week. I've been doing IT support for over 12 years. I have configured a lot of routers.
So I think why not treat myself to a top of the line router and test out 802.11N at the same time.
Here is the setup:
Dell D520 with fresh reload of WinXP SP2
Linksys WRV4400N
Linksys WPC4400N
First problem was I installed the card with the CDROM it shipped with. Big mistake. The driver and utility would not connect when WPA was configured. Ok my mistake, always download the latest drivers.
Second problem was my HP2600n that is connected to the router was unable to get print jobs. It was connected on the LAN, could ping but print jobs would fail, more on this later.
Third problem is that my wife could no longer get connected to her corporate VPN over this router. They use a Cisco VPN solution. Yes, VPN passthrough is enabled. Hey it worked fine on my WRT54G! She has a dell D630 with an Intel Pro 2200 WLAN card. It worked PERFECT with the WRT54G.
Fourth problem is the wireless connection would periodically disconnect.
Fifth problem is that I pulled the WRVS4400N and reinstalled the WRT54G and now the Linksys WPC4400N has a fluctuating signal level. The router is in the next room and with my build in Dell WLAN card the signal stays strong.
Yes, I upgraded the firmware on the router to the latest version.
IN regard to problem number two, it turns out the WRVS4400N uses 192.168.1.3 for the WLAN interface. That was the same IP I had on my printer. OK, now you all know that you need to resever 192.168.1.3 on your LAN if you use a WRVS4400N
IN regard to number three, no amount of tinkering allowed the Cisco VPN client to connect. I changed MTU size, turned off the firewall, added port triggers, you name it. Nothing worked but replacing the router. Now this is just supposed to work. I should not need to be a network engineer to make a WRVS4400N work. VPN's are supposed to pass through!!!
In regard to number 4, periodic dropping of Wireless, connection, I tried going to channel 1, even removing wireless security. Nothing seems to work except revert to the Dell WLAN card. This issue was seen on the WRVS4400N and the WRT54G. Acutally worse on the WRT54G and WPC4400N combination. I also noticed my Dell card was picking up about 10 WLAN's in my neighbor hood and the Linkys only 2.
So there is a special support phone number for partners. I waited for 55 minutes on hold and did not get an answer.
One Disapointed Linksys Reseller---- quote "cmartell" ----
Fourth problem is the wireless connection would periodically disconnect.
In regard to number 4, periodic dropping of Wireless, connection, I tried going to channel 1, even removing wireless security.
---- end quote ----
I have a WPC4400N PCMCIA card, and I am having this same exact problem too. I am using drivers 1.0.2.5, which also carries the designation of "Lite" - what the heck is up with "Lite" anyway? I want the full blown drivers!
Anyway, I can't seem to stay connected for too long, even though my router (ALSO a Linksys product, a WRT350N, with updated Linksys firmware 1.03.7) is only 4 feet away, if that.
My wireless card (the WPC4400N) keeps dropping connection, even if the router is right next to it! And of course, when I had my wireless router all the way across my apartment (roughly 20 feet) it would keep doing the same thing too, kept disconnecting periodically! Any kind of adjustment to driver parameters in my network card settings would just simply not help it at all, and I don't know what the problem is!
Can anyone please help?
My brother is a CISCO C.C.I.E. (Linksys is owned by Cisco), and I have yet to ask his help, but somehow I doubt even he could help me with this one.
I should not have to change my channel #, nor my security method, in order to keep a connection, especially when it has problems while the PCMCIA network card is being only 3-4 feet away from the router!! -
WRT54G V7 and SSID broadcast disable
have problems connect to the router when ssid broadcast is diablet. I can see the "network", enter the SSID and wep-key, but it will not connect.. If I select to broadcast my SSID I can easily connect to the router.. Strange, anyone who have the same problem ? I also have a wrt54g v1, and this router do not have these problems..With this you can easily connect to the router when ssid broacast is disablet..
I've used Intel PRO 2200GB ver 9.x and earlier version of 10 (driver + management software) to connect to a hidden SSID wireless network without any problem. I manually created a profile for the hidden network and connect to that profile.
On an unrelated note, I've enable SSID broadcast after reading a few articles about it being nothing but trouble. Here's one.
Message Edited by neo27 on 01-23-200709:24 AM -
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
BOSD, Battery issues and Heating problem after iOS 8 upgrade
i have upgraded my iPad mini to iOS 8. Ever since I upgraded to iOS 8 am facing blue screen issues and heating problem as well. This is really frustrating even the patch iOS 8.0.2 dint solve the problem. Are you guys listening our complaints. When will you fixing it.
The same thing happened to me on my 2012 Subaru Outback. I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
I paired the audio on my car with my iPhone 6. However, when I turned the car off and back on again, the iPhone would not pair automatically. I had to manually connect the iPhone with the car. Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device. So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it. YMMV -
I am making code to try to make a game and my problem is that my code......
I am making code to try to make a game and my problem is that my code
will not let it change the hit everytime so im getting the first guy to hit 1 then next hits 8 and so on and always repeats.
Another problem is that I would like it to attack with out me telling it how much times to attack. I am using Object oriented programming.
Here is the code for my objects:
import java.lang.*;
import java.io.*;
import java.net.*;
import java.util.*;
import java.util.Random;
import static java.lang.Math.*;
import java.awt.*;
import java.awt.color.*;
class rockCrab {
//Wounding formula
double sL = 70; // my Strength Level
double bP = 1; // bonus for prayer (is 1 times prayer bonus)
double aB = 0; // equipment stats
double eS = (sL * bP) + 3; // effective strength
double bD = floor(1.3 + (eS/10) + (aB/80) + ((eS*aB)/640)); // my base damage
//Attack formula
double aL = 50; // my Attack Level
double eD = 1; // enemy's Defence
double eA = aL / eD; // effective Attack
double eB = 0; // equipment bonus'
double bA = ((eA/10) * (eB/10)); // base attack
//The hit formula
double fA = random() * bA;
double fH = random() * bD;
double done = rint(fH - fA);
//health formula
double health = floor(10 + sL/10 * aL/10);
rockCrab() {
void attack() {
health = floor(10 + sL/10 * aL/10);
double done = rint(fH - fA);
fA = random() * bA;
fH = random() * bD;
done = rint(fH - fA);
System.out.println("Rockcrab hit" +done);
import java.lang.*;
import java.io.*;
import java.net.*;
import java.util.*;
import java.util.Random;
import static java.lang.Math.*;
import java.awt.*;
import java.awt.color.*;
class self {
//Wounding formula
double sL = 1; // my Strength Level
double bP = 1; // bonus for prayer (is 1 times prayer bonus)
double aB = 0; // equipment stats
double eS = (sL * bP) + 3; // effective strength
double bD = floor(1.3 + (eS/10) + (aB/80) + ((eS*aB)/640)); // my base damage
//Attack formula
double aL = 1; // my Attack Level
double eD = 1; // enemy's Defence
double eA = aL / eD; // effective Attack
double eB = 0; // equipment bonus'
double bA = ((eA/10) * (eB/10)); // base attack
//The hit formula
double fA = random() * bA;
double fH = random() * bD;
double done = rint(fH - fA);
//health formula
double health = floor(10 + sL/10 * aL/10);
self() {
void attack() {
health = floor(10 + sL/10 * aL/10);
fA = random() * bA;
fH = random() * bD;
done = rint(fH - fA);
System.out.println("You hit" +done);
}Here is the main code that writes what the objects do:
class fight {
public static void main(String[] args) {
self instance1 = new self();
rockCrab instance2 = new rockCrab();
instance2.health = instance2.health - instance1.done;
System.out.println("You hit: " +instance1.done);
System.out.println("rockCrabs health: " + instance2.health);
instance1.health = instance1.health - instance2.done;
System.out.println("RockCrab hit: " +instance2.done);
System.out.println("rockCrabs health: " + instance1.health);
instance2.health = instance2.health - instance1.done;
System.out.println("You hit: " +instance1.done);
System.out.println("rockCrabs health: " + instance2.health);
instance1.health = instance1.health - instance2.done;
System.out.println("RockCrab hit: " +instance2.done);
System.out.println("rockCrabs health: " + instance1.health);
instance2.health = instance2.health - instance1.done;
System.out.println("You hit: " +instance1.done);
System.out.println("rockCrabs health: " + instance2.health);
instance1.health = instance1.health - instance2.done;
System.out.println("RockCrab hit: " +instance2.done);
System.out.println("rockCrabs health: " + instance1.health);
instance2.health = instance2.health - instance1.done;
System.out.println("You hit: " +instance1.done);
System.out.println("rockCrabs health: " + instance2.health);
instance1.health = instance1.health - instance2.done;
System.out.println("RockCrab hit: " +instance2.done);
System.out.println("rockCrabs health: " + instance1.health);
}when the code is run it says something like this:
you hit 1
RockCrabs health is 9
RockCrab hit 7
your health is 38
you hit 1
RockCrabs health is 8
RockCrab hit 7
your health is 31
you hit 1
RockCrabs health is 7
RockCrab hit 7
your health is 24
you hit 1
RockCrabs health is 6
RockCrab hit 7
your health is 17
my point is whatever some one hits it always repeats that
my expected output would have to be something like
you hit 1
RockCrabs health is 9
RockCrab hit 9
your health is 37
you hit 3
RockCrabs health is 6
RockCrab hit 4
your health is 33
you hit 2
RockCrabs health is 4
RockCrab hit 7
your health is 26
you hit 3
RockCrabs health is 1
RockCrab hit 6
your health is 20
Edited by: rade134 on Jun 4, 2009 10:58 AM[_Crosspost_|http://forums.sun.com/thread.jspa?threadID=5390217] I'm locking.
-
A rather odd and annoying problem has recently been occuring on my MBP. A couple days ago my remote (after working without fail for over a year now) suddenly stopped working. Yesterday night and this morning it started working again but after a while it stopped again. I've read dozens of support articles which haven't really helped because there seems to be another problem.
Most articles have stated that there is an option to disable the IR receiver in the "security" window under system preferences. When the IR and remote are not working this option disappears but when they are working the option is present. I have also tried replacing the battery without any result.
I am now thinking that it might have something to do with heat buildup because it is mainly occuring after the laptop has been on for about a half hour, so I am going to try to borrow someone's fan.
If anyone has any suggestions to solve this I would appreciate it if you could help. Thanks!
MacBook Pro 1.83 GHz Mac OS X (10.4.9)check out this thread. Seems to be the same problem.
http://discussions.apple.com/thread.jspa?messageID=4701905� -
LG Ally text message and gps problems
hello. ive been with verizon for about 10 years maybe. ive been overall happy with the service and customer service. but the prices should be alot lower.lol. i started out with the motorolas then switched to the lg phones. only problem with the motorola was the speakers. not loud enough. could never hear the phone ring. the lgs usually suffer from the same problem.
i had a few phone problems but nothing like this lg ally. im on my second one and about to be my 3rd one in about 3 months. 1st phone i had every problem under the sun. this phone i am suffering from text message problems and gps problems. i suffer from what everyone else has problems with. the messages wont send. they will eventually lock up. it will show the envelope with the red explanation point ( i think thats the graphic). then usually everytime when i sent a text the texts will close. it will send then bounce back and show up as a draft and i have to resend it and wait for it to go thru. finally the last problem with the texts. when i send a text a phone number from my contacts shows up and freezes on the screen. its in white text with a black background. its the same number every time. it stays on the screen until i restart or pull my battery out.
gps. when i open up google gps that comes with the phone i make sure the gps is on... when the directions are found and the map pops up 9 out of 10 times it just keeps saying searching for gps. the turn by turn never is found. the 1 time it does it takes a good 10 minutes to be found. atleast on my first one ally the gps did work 8 out of 10 times. it just took a good 5-10 minutes for gps to be found and show turn by turn.
anyone else have these problems? where you able to fix them or did you need to get a new phone? the 2.1 update was supposed to fix problems. i think they just made it worse. the ally is supposed to have 2.2 froyo. where is it. is it ever going to get it. i got this phone because i like the lgs and the keyboard. also the sales representative on the phone was giving the lg ally rave reviews. why couldnt he say dont buy this go with a motorola droid. this phone is the biggest junk ever madeI do apologize you are having trouble with your device I looked in our information system on the LG Ally in reguards to issues you are having it states if you have the Free Droid Security anti virus protection application down loaded it will cause the phone to lock up or freeze. Check and make sure you do not have the application on your device. Check you GPS settings and make sure correct. Go to Settings; Location & Security; make sure GPS is on wireless network. If this does not fix issue you can try doing a Master Reset on your device. Make sure your contacts are saved in your G-mail account or through Back Up Assistance.
Master Reset/Soft Reset:
Factory Reset option 1
From the main screen, touch menu tab
Touch Settings
Touch Privacy
Touch Factory Data reset
Touch Reset Phone
Warning: This will erase all data from your phone, including:
Your Google account
System and application data and settings
Downloaded Applications
It will not erase: Current System software and bundled applications; SD Card files, such as music or Photos
Factory Reset option 2 - Warning this will reset device back to original factory settings.
Turn off the phone
Press and hold "home" + "end" + "volume up or down" keys together for a few seconds when the device is power off
Once device displays boot information, release keys.
Soft Reset
Press the Power key.
Touch Power off.
Touch OK.
Press the Power key to power on the device.
or
Remove battery cover, remove battery and reinstall.Also there is a new update for LG Ally it will be the Froyo 2.2 but there is not release date available at this time it will post on your device when available. Hope this Helps. Leslie -
i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
Please HELP!!!!!! Getting second thoughts on Lion!!!!Hi b,
Have you restarted yet? -
I have an Ipod video 30g that says Please wait very low battery. I charged it for about a day and the problem persists. I've tried using some solutions on the internet and none of them worked including: holding the menu and select, holding select and play to put it in disk mode with no avail. Is there anyone who can help me!!!
Have you read this post written by another forum member?
The Sad iPod icon.
However, as your iPod was purchased on Boxing Day, why not get it serviced under the warranty?
You can arrange online service here.
Service request.
Or if an Apple store is near you, take it there and have them check your iPod.
You can make an appointment by using this link.
Genius Bar Appointments. -
It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, which means IMessage is the problem! I restarted my iPad, I logged in and out of the apple ID in the store, AND YET IT STILL WON'T WORK, PLEASE HELP!
Hi Vmanfromusa!
It sounds like you are having an issue with activating your iMessage app on your iPad. An article outlining some troubleshooting steps for this issue can be found here:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thanks for using the Apple Support Communities. Have a good one!
-Braden
Maybe you are looking for
-
Connecting Creative Inspire 5.1 speakers to DVD player
Hi, I have a LG DVD Player (DSI 8352) which gives 5.1 home theatre (dolby decoder) output. If I buy Creative Inspire 5.1 speakers (5200 or 5700), how do I connect them ? Through RCA Stereo cables ? Would there be any compatibility issues ? Please sug
-
Can't use redeemed gift card money.
I can't buy music as it says i have to verity my billing info. But i already have money redeemed from a gift card available. when i try and buy something it says i have to verity my billing info with a credit card instead. Can anyone help??? Thanks.
-
pls. give advanced usage of to_date & to_char
-
SCCM 2012 R2 not show Threat item in Malware Detected Report.
I had no "Malware detected" items fount. There are no report abount virus that Endpoint Protection client finds. I try to test be creating file with this test content: "X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*", my Endpoin
-
MACbook Pro Retina 2013 - RAM Usage
hello all, I have a "new" MAC 2013 running latest OSX. I have the memory clean App on here and it shows that most of the time I have around 9 percent of the 8 GB left of RAM left. when it gets down to 0, it starts croaking. My PC has the same but nev