WRVS4400N PPPoE issues
Hello,
Few days ago i bought WRVS4400N and i tried to connect it to my ISP which is working only on PPPoE connection. Unfortunately we wasn't able to make it work. Please see below the log of the router when i try to connect via PPPoE:
Plugin pppoe loaded.
PPPoE Plugin Initialized
Plugin pppoe called.
pppd 2.4.1 started by root, uid 0
Sending PADI
HOST_UNIQ successful match
HOST_UNIQ successful match
Unexpected packet: Ether addr: 00:16:76:c8:08:fc (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0030 (PADO) PPPoE tag: type=0102 length=0008 (AC Name) data (UTF-8): raspppoe PPPoE tag: type=0101 length=0000 (Service name) P
HOST_UNIQ successful match
Unexpected packet: Ether addr: 00:16:76:c8:08:fc (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x002e (PADO) PPPoE tag: type=0102 length=0006 (AC Name) data (UTF-8): r1-bor PPPoE tag: type=0101 length=0000 (Service name) PPP
HOST_UNIQ successful match
Unexpected packet: Ether addr: 00:16:76:c8:09:8e (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x002e (PADO) PPPoE tag: type=0102 length=0006 (AC Name) data (UTF-8): r5-bor PPPoE tag: type=0101 length=0000 (Service name) PPP
HOST_UNIQ successful match
Unexpected packet: Ether addr: 00:16:76:c8:09:8e (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0030 (PADO) PPPoE tag: type=0102 length=0008 (AC Name) data (UTF-8): raspppoe PPPoE tag: type=0101 length=0000 (Service name) P
HOST_UNIQ successful match
Unexpected packet: Ether addr: 00:16:76:c7:f4:a2 (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0030 (PADO) PPPoE tag: type=0102 length=0008 (AC Name) data (UTF-8): raspppoe PPPoE tag: type=0101 length=0000 (Service name) P
Connecting PPPoE socket: 00:00:00:00:00:00 0000 0x427d8
Couldn't get channel number: Transport endpoint is not connected
Doing disconnect
Exit.
Please let me know if you need additional info. Your help is really appriciated!! Thank you!!!
Hi All,
I have an similar problem.
I have problem connecting router to internet. I try to connect with other router Netgear WPN824, Linksys WRT54G, Allied Telesyn AT-AR220E and with this working without any problem.
I have static IP but I need PPPoE connection with username and password.
Router Cisco Linksys WRVS4400Nv2 with firmware 2.0.0.8-ETSI, CPU STAR 9202, DRAM 64MB, FLASH 16MB.
My connection is ADSL 10Mbps/768kbps and ISP (Slovenia - SiOL) need PPPoE connection.
Modem is Sagem Fast 3344, Bridged, DHCP disabled, Firewall Disabled, Ethernet Status Automatic Speed Auto DUPLEX.
Please help me with this router connection.
Thanks.
This is the LOG of the router:
Jan 1 00:00:07 - bind 0.0.0.0 - Address already in use
Jan 1 00:00:07 - started as root without requesting chroot(), warning only
Jan 1 00:00:07 - starting on , port 80
Jan 1 00:00:20 - Plugin pppoe loaded.
Jan 1 00:00:20 - PPPoE Plugin Initialized
Jan 1 00:00:20 - Plugin pppoe called.
Jan 1 00:00:21 - pppd 2.4.1 started by root, uid 0
Jan 1 00:00:21 - Sending PADI
Jan 1 00:00:21 - HOST_UNIQ successful match
Jan 1 00:00:21 - HOST_UNIQ successful match
Jan 1 00:00:21 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:00:21 - HOST_UNIQ successful match
Jan 1 00:00:21 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:00:21 - HOST_UNIQ successful match
Jan 1 00:00:21 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0049 (PADO) PPPoE tag: type=0102 length=0017 (AC Name) data (UTF-8): E320-BRAS-LJ-CIGALETOVA PPPoE tag: type=0103 length=0004 (
Jan 1 00:00:21 - HOST_UNIQ successful match
Jan 1 00:00:21 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:00:21 - HOST_UNIQ successful match
Jan 1 00:00:21 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0049 (PADO) PPPoE tag: type=0102 length=0017 (AC Name) data (UTF-8): E320-BRAS-LJ-CIGALETOVA PPPoE tag: type=0103 length=0004 (
Jan 1 00:00:21 - Connecting PPPoE socket: 00:00:00:00:00:00 0000 0x427d8
Jan 1 00:00:21 - Couldn't get channel number: Transport endpoint is not connected
Jan 1 00:00:21 - Doing disconnect
Jan 1 00:00:21 - Exit.
Jan 1 00:00:21 - br0: port 2(eth2) entering forwarding state
Jan 1 00:00:21 - br0: topology change detected, propagating
Jan 1 00:00:21 - br0: port 1(eth0) entering forwarding state
Jan 1 00:00:21 - br0: topology change detected, propagating
Jan 1 00:00:27 - download uses obsolete (PF_INET,SOCK_PACKET)
Jan 1 00:00:28 - Kris Linux Driver:Version=v2.00 for CISCO's RVSR000,WRVS4400N & WRVS4400Nv2(Feb 18 2009:18:16:43)
Jan 1 00:00:28 - Enable Tcp Connection Tracking
Jan 1 00:00:28 - The Total Used Table Memory Size = 0xFB4878 = 16082K
Jan 1 00:00:28 - Trying to free free IRQ16
Jan 1 00:00:28 - Trying to free free IRQ17
Jan 1 00:00:29 - version 0.7.2 started
Jan 1 00:00:33 - Kris is unlocked
Jan 1 00:00:33 - Reset IDP Engine!!!
Jan 1 00:00:33 - The Total Used Table Memory Size = 0xFB4878 = 16082K
Jan 1 00:00:33 - Enable DDOS Detection!!
Jan 1 00:00:33 - Enable PortScan Detection!!
Jan 1 00:00:33 - Enable IP Sweep Detection!!
Jan 1 00:00:50 - Plugin pppoe loaded.
Jan 1 00:00:50 - PPPoE Plugin Initialized
Jan 1 00:00:50 - Plugin pppoe called.
Jan 1 00:00:50 - pppd 2.4.1 started by root, uid 0
Jan 1 00:00:50 - Sending PADI
Jan 1 00:00:50 - HOST_UNIQ successful match
Jan 1 00:00:50 - HOST_UNIQ successful match
Jan 1 00:00:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:00:50 - HOST_UNIQ successful match
Jan 1 00:00:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:00:50 - HOST_UNIQ successful match
Jan 1 00:00:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:00:50 - HOST_UNIQ successful match
Jan 1 00:00:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0049 (PADO) PPPoE tag: type=0102 length=0017 (AC Name) data (UTF-8): E320-BRAS-LJ-CIGALETOVA PPPoE tag: type=0103 length=0004 (
Jan 1 00:00:50 - HOST_UNIQ successful match
Jan 1 00:00:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0049 (PADO) PPPoE tag: type=0102 length=0017 (AC Name) data (UTF-8): E320-BRAS-LJ-CIGALETOVA PPPoE tag: type=0103 length=0004 (
Jan 1 00:00:50 - Connecting PPPoE socket: 00:00:00:00:00:00 0000 0x427d8
Jan 1 00:00:50 - Couldn't get channel number: Transport endpoint is not connected
Jan 1 00:00:50 - Doing disconnect
Jan 1 00:00:50 - Exit.
Jan 1 00:01:20 - Plugin pppoe loaded.
Jan 1 00:01:20 - PPPoE Plugin Initialized
Jan 1 00:01:20 - Plugin pppoe called.
Jan 1 00:01:20 - pppd 2.4.1 started by root, uid 0
Jan 1 00:01:20 - Sending PADI
Jan 1 00:01:20 - HOST_UNIQ successful match
Jan 1 00:01:20 - HOST_UNIQ successful match
Jan 1 00:01:20 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:01:20 - HOST_UNIQ successful match
Jan 1 00:01:20 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:01:20 - HOST_UNIQ successful match
Jan 1 00:01:20 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:01:20 - HOST_UNIQ successful match
Jan 1 00:01:20 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:01:20 - HOST_UNIQ successful match
Jan 1 00:01:20 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0049 (PADO) PPPoE tag: type=0102 length=0017 (AC Name) data (UTF-8): E320-BRAS-LJ-CIGALETOVA PPPoE tag: type=0103 length=0004 (
Jan 1 00:01:20 - Connecting PPPoE socket: 00:00:00:00:00:00 0000 0x427d8
Jan 1 00:01:20 - Couldn't get channel number: Transport endpoint is not connected
Jan 1 00:01:20 - Doing disconnect
Jan 1 00:01:20 - Exit.
Jan 1 00:01:50 - Plugin pppoe loaded.
Jan 1 00:01:50 - PPPoE Plugin Initialized
Jan 1 00:01:50 - Plugin pppoe called.
Jan 1 00:01:50 - pppd 2.4.1 started by root, uid 0
Jan 1 00:01:50 - Sending PADI
Jan 1 00:01:50 - HOST_UNIQ successful match
Jan 1 00:01:50 - HOST_UNIQ successful match
Jan 1 00:01:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:01:50 - HOST_UNIQ successful match
Jan 1 00:01:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:01:50 - HOST_UNIQ successful match
Jan 1 00:01:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:01:50 - HOST_UNIQ successful match
Jan 1 00:01:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0049 (PADO) PPPoE tag: type=0102 length=0017 (AC Name) data (UTF-8): E320-BRAS-LJ-CIGALETOVA PPPoE tag: type=0103 length=0004 (
Jan 1 00:01:50 - HOST_UNIQ successful match
Jan 1 00:01:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0049 (PADO) PPPoE tag: type=0102 length=0017 (AC Name) data (UTF-8): E320-BRAS-LJ-CIGALETOVA PPPoE tag: type=0103 length=0004 (
Jan 1 00:01:50 - Connecting PPPoE socket: 00:00:00:00:00:00 0000 0x427d8
Jan 1 00:01:50 - Couldn't get channel number: Transport endpoint is not connected
Jan 1 00:01:50 - Doing disconnect
Jan 1 00:01:50 - Exit.
Similar Messages
-
WRVS4400N PPPoE issue after v2.0.2.1 firmware upgrade
Hi, I have a WRVS4400N v2 router which was working perfect until I've upgraded the firmware to v2.0.2.1. Since then, my router does not save anymore the PPPoE password so I am not able to connect. Does anybody know how can I fix this?
Simon, nothing succedeed. I've cleared the browser cache and also downgraded the firmware from v2.0.2.1 to v2.0.1.3. Basically the router does not save any password under PPPoE menu. I've reset it to factory default, same result.
After filling the password and saving, before router reboot, I see the connection type changing from PPPoE to Automatically connect - DHCP. I do not know if this mean anything or not. Do you have any other ideea? -
Gentlemen,
may I rise some ongoing issues about WRVS4400N V1.1 (FW: latest: V1.1.13-ETSI):
- Bug: The general log logs the events without daylight saving time (in opposite to the IPS log which shows the time correctly)
- Router Intrusion Prevention System (IPS) Signature-1.42 (03/JUN/2010) is now more than a year old! Hard to imagine, that it is still up-to-date. I would rather expect, that it will be updated every month at least, if not automatically at all! And despite several promises in this blog, CISCO did not update it up to now.
- Latest Firmware (WRVS4400N v1.0 and v1.1 firmware version 1.1.13, 25/FEB/2009) is even more than 2.5 years old. Is there any intention by CISCO to still support the V1.1 version??
May CISCO provide a comment on these, I would very much appreciate.
Sincerely,
Zurich8000Hi,
It's the first thing I did, I tried with a spare WAG300N (modem/router) and it connects but gives some errors too before connecting...
That's why I think the problem comes from the provider even if the other modem connects it gives the same kind of errors as you can see in this logs... (Probably a question of tolerance)
Sat, 2000-01-01 01:02:46 - Sending PADI
Sat, 2000-01-01 01:02:48 - HOST_UNIQ successful match
Sat, 2000-01-01 01:02:48 - Unexpected packet: Ether addr: 00:90:1a:42:7f:43 (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x002b (PADO) PPPoE tag: type=0102 length=0007 (AC Name) data (UTF-8): PTRAS07 PPPoE tag: type=0103 length=0004 (Host Uniq) data
Sat, 2000-01-01 01:02:48 - HOST_UNIQ successful match
Sat, 2000-01-01 01:02:48 - Unexpected packet: Ether addr: 00:90:1a:42:32:3e (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x002b (PADO) PPPoE tag: type=0102 length=0007 (AC Name) data (UTF-8): PTRAS06 PPPoE tag: type=0103 length=0004 (Host Uniq) data
Sat, 2000-01-01 01:02:48 - HOST_UNIQ successful match
Sat, 2000-01-01 01:02:48 - Got connection: 1dd0
Sat, 2000-01-01 01:02:48 - Connecting PPPoE socket: 00:90:1a:42:32:00 1dd0 nas0 0x1004e180
Sat, 2000-01-01 01:02:48 - using channel 1
Sat, 2000-01-01 01:02:48 - Using interface ppp0
Sat, 2000-01-01 01:02:48 - Connect: ppp0 --> nas0
Sat, 2000-01-01 01:02:48 - Couldn't increase MTU to 1500.
Sat, 2000-01-01 01:02:48 - Couldn't increase MRU to 1500
Sat, 2000-01-01 01:02:48 - LCP is allowed to come up.
Sat, 2000-01-01 01:02:48 - Couldn't increase MRU to 1500
Sat, 2000-01-01 01:02:49 - PAP authentication success
Sat, 2000-01-01 01:02:49 - local IP address 78.141.136.84
Sat, 2000-01-01 01:02:49 - remote IP address 88.207.184.1
Sat, 2000-01-01 01:02:49 - primary DNS address 194.154.192.101
Sat, 2000-01-01 01:02:49 - secondary DNS address 194.154.192.102
So as you can see, a different modem gives the same kind of errors even if it connects... -
I have the following problem with my router : The ISP provides 500mb/s and my router only outputs on wire or wireless 200-230mb/s.
The set up :
1) Router Linksys EA6400
firmware : 1.1.40.160989
2) Network cable : Gigabit
3) Wireless adaptor : Linksys WUSB6300
4) PC : i5 4690 ; 8GB RAM 2400MHz ; SSHD 1 TB; Motherboard Gygabite Z97
5) Connection on router PPPOE ; ISP : RDS Romania.
ISSUE : I always get no more than 230mb/s on tests (www.speedtest.net; or other tests sites and benckmarks) wired or wireless I have the same speed “limit”. The ISP came and tested my connection and on the router INPUT (internet) I have 500mb/s no fluctuations.
Also I have drops on wireless after a couple of hours of continuous internet traffic.
What I have tried :
Rebooting router
Factory reset
Firmware downgrade and upgrade again
-Nothing worked
Does the router have conflicts with the PPPOE connection ?
Might the router be broken ?
Please help me with this issue.Hi,
@chadster766 : I have tried also these setting but no improvement.
@bigdave240 : Here is the tests results that I have done :
ISP Direct Wired result : (rush hour tests
Last Result:
Download Speed: 401754 kbps (50219.3 KB/sec transfer rate)
Upload Speed: 14580 kbps (1822.5 KB/sec transfer rate)
Latency: 16 ms
Jitter: 1 ms
08.02.2015, 19:35:13
Router Wired result :
Last Result:
Download Speed: 158115 kbps (19764.4 KB/sec transfer rate)
Upload Speed: 99675 kbps (12459.4 KB/sec transfer rate)
Latency: 16 ms
Jitter: 1 ms
08.02.2015, 19:39:37
Router Wireless result :
Last Result:
Download Speed: 131282 kbps (16410.3 KB/sec transfer rate)
Upload Speed: 103160 kbps (12895 KB/sec transfer rate)
Latency: 18 ms
Jitter: 7 ms
08.02.2015, 19:55:32
When tested NOT in rush hour, and get @500mb/s from ISP wired , the results from the router wired/wireless are @250mb/s.
You can see from the results that ISP @400mb/s , the output from the router it's @150mb/s , it's somehow truncated.
What other settings could I try before sending this router to warranty or customer protection?
Maybe the high speed PPPOE connection it's not supported by this router ?
Kind regards. -
2811 w/ WIC-1ADSL-I-DG PPPoA issue
Hello:
I have been trying to test our new office gear prior to move, specifically the DSL WIC card.
It seems I have all the config correct but I fail to negotiate link and I am not getting much info from a debug standpoint leading me to believe: -1- PPP isn't quite set up correctly -2- the WIC is possibly bad.
Would it be possible for someone to review my config since I can find nothing on the web that serves as a decent example of using this WIC card with Qwest?
DETAILS:
Info pulled from my old Actiontec modem for testing purposes:
VPI/VCI = 0/32
DSL Mode = MMODE
DSL Negotiated Mode = T1.413
Up/down = 7168/896
ATM QoS class = UBR
The connection is doing PPPoA, evidently it is using PAP per my ISP (qwest does the local loop, my own ISP the VC termination and routing)
Cisco 2811 and WIC setup:
interface ATM0/1/0
description QWEST DSL - circuit id:
no ip address
no ip mroute-cache
shutdown
no atm ilmi-keepalive
dsl operating-mode auto
dsl enable-training-log
pvc 0/32
encapsulation aal5mux ppp dialer
dialer pool-member 1
interface Dialer1
ip address negotiated
encapsulation ppp
dialer pool 1
ppp authentication pap
ppp pap sent-username <username_goes_here> password 0 <passwd_goes_here>
Additionally, it would be helpful if you provided what all the 'Modem States' are. For example, Modem state = 0x8 is in many docs but you don't say anything about 0x3. Its helpful to know all the codes for Modem state if your going to recommend doing debugs of atm events for troubleshooting. Hence, the post to the forum. I can't get link and everything appears to be set up properly.
Thanks for the insight/answers.No, I am afraid we don't do ADSL over ISDN. My boss ordered the equipment and I think the reseller wasn't too bright.
So would I be correct that I am going to have to have a WIC-1ADSL or a HWIC-1ADSL?
I see that this ADSL over ISDN card we have currently does support T1.413, but given I can't get link I am guessing that is only T1.413 when over ISDN so I have to use one of the other types of WICs listed above if this is over POTS.
If someone from Cisco or otherwise can confirm that would be great so I can go ahead and get the right card shipped to us ASAP.
Thanks for the assist,
-Jeff
Thanks for pointing that out. I suspected it might be the issue but have not ordered or touched many DSL WICs in my day, only the bigger chassis's that terminate the traffic on the provider end. -
AirPort Extreme PPPoE issues after disconnect
Hi all...
I seem to have an issue with my AirPort.... Brand new, out of the box, I plugged it in and it worked using my old configs (It replaced a Linksys WRT54G) and all was well. I unplugged it when there was a lightning storm coming ( I am on wireless broadband so I have a dish on my roof for the net... did not want it to fry another router... this has happened 3 times even with an APC in line with the ethernet cables). After the storm passed, I plugged it back in and voila... unable to find PPPoE server. Now, the only way I can connect is to connect it through the old Linksys box ( it goes from the dish to the Linksys box set to PPPoE always on to the AirPort via Ethernet). I have performed a hard reset and manually configured it, however it still does not find the AirPort....Any suggestions?Spent 8 hours last night with same issues. All issues really started after the update. I had just bought the new dual band, set up was smooth, then all **** broke loose after the X.1 update. A couple of things I noticed. 1) Same issues you had that if the computers sat, it took a good 5 minutes to get the network up again or "see" it 2) I use comcast and I have noticed that the dynamic is causing issues between the AE and modem (post update) 3) Every time I try to change settings on the AE to add Guest network, the whole network crashes and I have to go to complete hard boot, reset AE and do power start all the way out. 4) Comcast rep had me power cycle all of my hard wire gigabit routers off the AE. I was having issues until I did this. Apparently the AE keeps IP if you feed routers off of it. Going to revert to 7.4 right now.
-
WRVS4400N - firmware issues and IPS signature update messages
On my WRVS4400N with Firmware Version: V1.1.03 I keep getting the message:
"Your Signature Version is beyond xxx days. Please Update it!"
Cisco/Linksys: about time to update the IPS signature, because I always have the latest available, but you don't update it anymore.
Besides: there are a lot of known issues with this router, but you don't provide us with a new firmware. OK, I did find a beta WRVS4400N_v1108.img on rapidshare, but is this really a Linksys beta? Why don't you publish updates anymore?
I am very disappointed by your service on this matter :-(
JJ (ICT dept 2500+ employees + Cisco user)Hi Tom,
Last night I reset the setting to factory default, reinstalled firmware v2.0.2.1 and then restored my settings I backed up. Everything worked great after that but this morning it was down again. Same thing, no network and can't log into the router and forced to cycle the power.
As a "way out there" guess, are there any compatibility issues with certain switches? One thing I did change the past few days was that I took out an older cheap 8-port D-Link Gigabit switch which was maxed-out and replaced it with a Netgear ProSafe 16-port Gigabit switch (model JGS516).
Another thing that has changed is that I have added another network by cascading a D-Link DIR-655 wireless router. I have the WAN port of this router connected to a LAN port on the WRVS4400N router. The WRVS4400N router is using IP 192.168.21.x (subnet mask 255.255.255.0) and the other router is set to 192.169.10.x (subnet mask 255.255.255.0). I may be wrong but I can't see this being an issue. ANy ideas? -
WRVS4400N PPPoE Connection Problem
I have a Cisco Small Business WRVS4400N router that is behind my ISP supplied gateway. I recently changed the configuration around to put the ISP suppleid modem into "Transparent Bridge" mode, and allowed the WRVS4400N to handle the conenction. Which is does fine. My problem is that every time it looses power, I have to log back into it, and re enter the password for the PPPoE crediantials. It retains the Username, but not the password. This is quite annoying, as we have had several power outages here lately...
My question is, is this normal behavior? If it is, why? If it isn't, how do I correct it?
Thanks,
JohnHello John,
On the newer code of firmware it has that behavior were for some reason it will blank out the password information. If you were to back-up your configuration and open it up in a note bad you should come across your password you've used for the PPPoE information. I wouldn't be alarmed if you see the password blank in the PPPoE field.
Hope that helps,
Thanks,
Clayton Sill -
Trying to configure a PPPoE session on a 7206VXR however all the commands such as ppp on an eth interface, vpdn in global config are missing.
The IOS says that its supported:
ROM: System Bootstrap, Version 12.3(4r)T3, RELEASE SOFTWARE (fc1)
BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.3(9), RELEASE SOFTWARE (fc2)
System image file is "disk2:c7200-pk9u2-mz.123-14.T3.bin"
which is service provider with ipsec etc..
Am I missing something obvious? I also have a 8000 user license but at the moment in the labs only need a couple of lines and the docs say <1000 no license needs to be enabled.GP, Thanks for that, I have access to the tool and thought I'd run it through, just checked again and got:
Image Name DRAM Flash Life Cycle
c7200-pk9u2-mz.12.3-14.T 128 48 ED
AAA Double Authentication Secured by Absolute Timeout
Accounting server connectivity failure and recovery detection
ACL - Support for Non-Contiguous Port Ranges on an ACE
PPP MLP MRRU negotiation configuration
PPPoE Session Limit per NAS port
So must have seen that PPPoE session Limit per NAS port and registered it as supporting pppoE.
Currently getting the distributor to provide your suggested.
It's current use is only as a B-RAS within an Inter-operability model and so we were trying as many full features northbound into a core of a err chinese router :)
Will let you know how it works.
Craig. -
I must say that i am totally impressed by the product, i have around 3 sites and out of 3 sites i was able to make a tunnel between two sites. Now when i went to to third site, first thing that surprised me is that PPPoE doesn't work, it keeps showing WAN IP as 0.0.0.0 and when i connect the same connection in other broadband routers or configure it on my windows 7 directly, it works fine but only RV042 it doesn't work at all. Than i thought of configuring RV042 as DMZ but now i am not able to create the VPN tunnel, it keeps showing RESOLVING HOSTNAME for local dyndns url. Please help. Thank you.
Incase if somebody needs a diagram.Alright i got it working :D, it was my fault and the fault was so small that i could not see it keeping it right in front of me. Well the PPPoE doesn't work so i gave DMZ one more try and this time i realized that the INTERFACE while creating tunnel was WAN1 where it should be WAN2. That's it, its working now. Thank you very much
-
Another PPPoE issue...
When configuring an Airport Extreme, or Express, to connect DSL with PPPoE;
should the "Enable PPP Dial-in; in the Airport Admin Utility "configure" tab be selected; to instruct Airport to connect PPPoE?should the "Enable PPP Dial-in; in the Airport Admin Utility "configure" tab be selected; to instruct Airport to connect PPPoE?
No, that option allows you to use the AEBS's dial-up phone port to access the AEBS. Instead, you want to go to the Internet tab and select "PPP over Ethernet (PPPoE)" in the "Connect using" window. -
2nd gen Time Capsule PPPoE issue
I'm lucky enough to have just got a 210Mbs fibre connection at home here in rural Cornwall, UK. The router I was given by my ISP (BT) is known for being pretty terrible, and since the fibre line authenticates via PPPoE I hoped not to use the BT HomeHub 3.
Via a Cat5e cable I connected my separate VDSL fibre modem (they give you two boxes - VDSL fibre modem + HomeHub 3 router) to the Time Capsule and set up the PPPoE login information. The Time Capsule connected immediately and I was online. But it wasn't *that* fast, and a speed test revealed that it was topping out at 80Mbs via Cat5e to my MacBook pro from the Time Capsule.
To check the Cat5e cable from the VDSL modem to the Time Capsule, I plugged it straight into my 2010 Macbook Pro and configured a PPPoE connection manually and connected. The same speedtester reported 210Mbs. So the cable is working properly, and the fibre is performing as it should.
Plug the Cat5e cable back into the Time Capsule's WAN port (which should be Gigabit ethernet), and the Macbook Pro via ethernet into port 1, redo speed test, 80Mbs. I then tried connecting via 5Ghz wifi (reported connection speed via the Airport menu was 300Mbs when a few feet from the TC) and the speed test reveals 80Mbs or so.
I can't for the life of me figure out why the TC is connecting via PPPoE at such slow speeds. I know my cabling is fine from direct tests. I don't really want to use the HomeHub3 if I can help it. Any advice or suggestions gratefully received!80Mbps is typical speed when the network connection has dropped to 100Mbps instead of 1000Mbps.
In PPPoE mode you have no control over the WAN port speed, but it is possible the TC is cutting it back to 100mbit. The only way to tell is get a gigabit switch and plug it between the modem and the TC.. get one with indicator leds that show connect speed and see what happens.
A Gen2 TC is also getting pretty old.. one of the signs of aging is often port speed dropping from gigabit to fast ethernet.. then 10mbit before not at all. -
RV180 router will not connect to ISP using PPPoE
I had the same problem. The RV180W would not connect to an AT&T DSL connection using PPPoE (modem in bridge mode), or behind the DSL Modem/router with the DSL modem/router providing a dynamic IP to the RV180W or a cable modem (TimeWarner Roadrunner dynamic IP). I upgraded the firmware yesterday and now the RV180W will connect to a dynamic WAN IP, but it still will not connect using PPPoE.
I have also noticed the admin interface is only accessible about 75% of the time. When going to 192.168.1.1 the login prompts either don't come up or if they do, after logging in, the screen never fully loads after that. I have to reboot the router to get it to work.
Also, the router has not yet pulled DNS from either the DSL or the cable modem. I had to manually enter those addresses.
Any suggestions on the PPPoE issue? Any thoughts as to why the admin interface is not always accessible or the DNS?
Thank you,
RonHi Ron, thanks for using our forum, my name is Johnnatan and I am part of the Small business Support community. About your login issue I recommend you to use different browsers such as Mozilla, i.e 9.0 or superior, Safari, Opera etc. About the PPPoE question, basically you just need the username and the password provided by your ISP. Can you please reach out to our Small Business Support Center and open a Service Request to address this issue? One of our Engineers may be able to work with you and diagnose the root cause. You can find the appropriate contact information for SBSC in the below link. http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
I hope you find this answer useful,
*Please mark the question as Answered or rate it so other users can benefit from it*
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer. -
Hi I am just trying to setup an RV220w on a FTTC BT Openreach modem and am finding that the router will not establish a connection.
In the logs I have seen the following:
Sat Jan 1 00:06:21 2000(GMT) [rv220w][System][PLATFORM] pppoeMgmtTblHandler: pppoe enable failed
Sat Jan 1 00:06:21 2000(GMT) [rv220w][System][PLATFORM] pppoeMgmtDBUpdateHandler: error in executing database update handler
I have seen some issues that people are having with the 1.0.1.0 firmware, in particular PPPoE issues. I note the router came preinstalled with 1.0.1.0 so have downgraded to 1.0.0.26.
I have removed the settings and tried again, but receive the same error message above.
The PPPoE settings are as follows:
username: [******]@[**********].[***]
password: [******************]
Authentication Type: Auto-Negotiate
At a bit of a loss what is going on ? I have tried resetting it to factory defaults on firmware 1.0.0.26 and entered the details again, but have the same error.
Has anyone else had success on this, I have other PPPoE devices that work absolutely no problems?Have you tried installing the Visual C++ Redistributable 2005? On 64-bit machines install both the 32-bit and 64-bit versions.
-
AEBS 802.11n and PPPoE AGAIN!!!!
Ok, does apple read any of these posts? I am very irritated that I spent money on the AEBS (mostly for the support of USB disks for backups) and PPPoE is totally broken! I get frequent disconnects, and long down times before it establishes a connection. I just borrowed a Linksys 802.11n router and it works LIKE A CHAMP (no disconnects WHAT SO EVER)!
I am constrained to run my DSL in bridge mode, as we have both a web server and a VPN set up on our home network, so this PPPoE issue is going to have me kicking my AEBS into the trashcan in favor of a Linksys.
Please Apple - get on the ball, how hard could it be?
What is your experience with PPPoE?
-jmj75"Ok, does apple read any of these posts"
Most likely not, as this is a user to user forum.
Why not provide your feedback directly to Apple?
http://www.apple.com/feedback/airportextreme.html
Maybe you are looking for
-
How Do I Reset My Preferences?
To set your preferences back to the "factory" default, quit Encore and then relaunch Encore while holding down Ctrl+Shift. If you get a dialog asking you to locate the plug-ins folder, just cancel it.
-
"File not found: /Adobe_CFC_Generator/handlers/index.cfm"
Ok I know this is going to turn out to be something silly. But I cannot seem to get the Extensions to function. I get the error "File not found: /Adobe CFC Generator/handlers/index.cfm" every time I attempt to use the CFC generator and similar erro
-
I recently purchased a copy of Lion, will I be eligible for a free upgrade of Mountain Lion?
-
Question in title please help
-
I am about to buy an ipad2. I already have a Verizon aircard built in to my SONY notebook - can I share that same existing Verizon data plan with my new Verizon iPad2? I would rather not to have to buy a second data plan. Thanks for your input