Xp-310
I just got a Epson Home XP-310 printer and it is not working at all.
I got to the part where I needed to let the ink prime and then it said paper jam. WHEN there was no paper in the printer.
How do I fix that?
Hi NewStudentHC,
Welcome to the HP Support Forums! I see you have recently purchased an Epson printer, congrats on your new purchase. To get the support and assistance you need I suggest checking out the Epson Support Pages:
Welcome to Epson Support
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!
Similar Messages
-
How do I download the solution center to my HP Touchsmart 310 pc
I have a HP Touchsmart 310 PC with the Windows 7 operating system. Back in January I started having trouble logging in on my page. I was the only admin on the pc, so I could not access certain information or make any changes to the computer. I finally erased everything in the computer memory and started over from scratch. I have an HP Photosmart printer that I use, but when I re-installed the software, it did not include the hp solution center, so I can't scan any documents or photos to my pc. I need help!
Hi,
Please let us know what is your printer, hope we can help.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
On my HP Touchsmart 310 PC how do I increase the inactivity time on the display?
On my HP Touchsmart 310 PC how do I increase the inactivity time on the display? Windows 7, 64-bit
Hi,
Please try Control panel > Power options > Change when the computer sleeps
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
EPSON Workforce 310 "scanner reported an error" when using document feeder
I'm having trouble using my EPSON Workforce 310 printer/scanner with my new MacBook Pro (late 2012, 2.5 GHz i5, OS X Mountain Lion 10.8.2).
Using the flatbed I can scan without a problem. But when I try to use the document feeder, I get the following error right after I click Scan and before the scanner has done anything (at least I don't hear anything moving inside the EPSON):
Scanner reported an error
An error occured during scanning
The EPSON's display doesn't show any error or special message.
This is repeated whether I use Image Capture, Preview's Import from Scanner, or the printer's native app (PrinterProxy, the one that shows up in the doc whenever the printer is printing or scanning).
I have no problem doing the scanning from my old iMac (2006, 2GHz Core Duo, Snow Leopard). After scanning to the MacBook fails I can walk over to the iMac and scan from there without problem and without resetting anything on the EPSON.
The EPSON is connected the home network via ethernet to a Time Capsule. Both computers are connected to the network via WiFi.Syd,
My wife's iMac with 10.6.6 stopped working with her Epson 2480 Photo scanner. Get the error message "SCANNER reported an error. An error has occurred during scanning" I am trying to use it from the Image Capture App or from the print/fax option in Settings which opens Image Capture. I ran the uninstall program and then reinstalled the ICA 13969 .dmg but get the same error. Not sure what else I can do. -
I have purchased a brand new HP Touchsmart model 310-1110A. ....The computer repeatidly stops working and places a blue screen with an STOP ERROR message saying the computer has been shut down to prevent any damage , the computer is only ( 1 ) month old and this crash error message appeared within the first 2 weeks of purchase....
We have returned the computer to the store 3 times now to have it looked at by a HP technician, each time it is returned to us saying that they have looked at it and fixed it. To no avail will they REFUND/REPLACE this computer for another, stating that it is not there policy and that HP have the final say as to whether they will write the product off as a LEMON. The store kept the computer for 4days in there store using it and said the ERROR code never appeared whilst they used it. Upon returning to our home and the computer has crashed again with the same ERROR code. There has been ( 2 ) Recoveries performed on this computer.The ERROR MESSAGE follws. Please if anyone can shed some light on this please reply as we are not getting any help from the store from which we purchased. Should this computer be replaced or is there some other reasons this is happening.
A problem has been detcted and windows has been shutdown to prevent damage to your computer.
NOT...LESS....OR....EQUAL.
If this is the first time you have seen this STOP ERROR screen,restart your computer.If this screen appears again, follow these steps. Check to make sure and hardware or software is properly installed, If this a new istallation ask your hardware or software provider for any windows updates you might need.
If problem continues disabel or remove any new installed hardware or software.disable bios memory options such as caching,if you need to use safe mode to remove or diable coponants,restart your computer ,press F8 and select safe mode.
Technical information. ...STOP:0x0000000A(0x0000000000000000,0x00000000000000002,0x00000000000000001.0
xFFFFF80002C55D07)
Collecting data for crash dump...
Installing disc for crash dump
Install memory compliance. Contact your system intell or tech support for further assistance.It's a simple BSOD AKA Bluescreen error, it is most likely NOT a hardware failure.
Make sure that you have up to date Antivirus software,
Make sure Windows is fully updated via Windows Update
Make sure you have run the HP Software update app and the HP software is all up to date.
Unplug any additional hardware you may have plugged in to help troubleshoot.
That will resolve 90% of these errors -
Smartview 11.1.2.2.310 - Excel 2007 crashes when openning panel
We are upgrading our users from a previous version of Smartview to 11.1.2.2.310
we are finding users on excel 2007 are having problems when attempting to work with a macro enabled workbook and ad hoc query previously setup from the previous version
Excel crashes when we try and select the connection panel screen with the following dialogue message:
"Microsoft Office Excel has stopped working"
we also tried with the macro options turned off
looking for some help, not sure how to resolve this
Any thoughts anyone?
ChazChaz - were you able to find a solution to this? I am experiencing the same thing with Smartview on excel 2007 also and cannot get past it.
-
I have an Nvidia GTX 560, yet 310.19 wont work
Irritated and baffled by this. This page clearly states that my GTX 560 is supported by 310.19 (as it should...this card isn't that old), yet after installing the new driver and rebooting, Xorg fails to start, and error logs say that the Nvidia kernel module couldn't be initialized.
Xorg log
[ 10.593]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 10.616] X Protocol Version 11, Revision 0
[ 10.616] Build Operating System: Linux 3.6.3-1-ARCH x86_64
[ 10.616] Current Operating System: Linux ZeroArch 3.6.6-1-ARCH #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012 x86_64
[ 10.616] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=996407e6-20a3-422f-92f8-3d9fe913b87c ro quiet add_efi_memmap
[ 10.616] Build Date: 08 November 2012 07:09:29PM
[ 10.616]
[ 10.617] Current version of pixman: 0.28.0
[ 10.617] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10.617] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10.617] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 20 22:14:39 2012
[ 10.717] (==) Using config file: "/etc/X11/xorg.conf"
[ 10.717] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 10.742] (==) ServerLayout "Layout0"
[ 10.742] (**) |-->Screen "Screen0" (0)
[ 10.742] (**) | |-->Monitor "Monitor0"
[ 10.742] (**) | |-->Device "Device0"
[ 10.742] (**) |-->Input Device "Keyboard0"
[ 10.742] (**) |-->Input Device "Mouse0"
[ 10.743] (**) Option "Xinerama" "0"
[ 10.743] (==) Automatically adding devices
[ 10.743] (==) Automatically enabling devices
[ 10.743] (==) Automatically adding GPU devices
[ 10.827] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 10.827] Entry deleted from font path.
[ 10.827] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 10.828] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 10.828] Entry deleted from font path.
[ 10.828] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 10.828] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 10.828] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10.828] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 10.828] (WW) Disabling Keyboard0
[ 10.828] (WW) Disabling Mouse0
[ 10.828] (II) Loader magic: 0x7fcc40
[ 10.828] (II) Module ABI versions:
[ 10.828] X.Org ANSI C Emulation: 0.4
[ 10.828] X.Org Video Driver: 13.1
[ 10.828] X.Org XInput driver : 18.0
[ 10.828] X.Org Server Extension : 7.0
[ 10.831] (--) PCI:*(0:1:0:0) 10de:1201:3842:1461 rev 161, Mem @ 0xfc000000/33554432, 0xd0000000/134217728, 0xd8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 10.831] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 10.849] Initializing built-in extension Generic Event Extension
[ 10.849] Initializing built-in extension SHAPE
[ 10.849] Initializing built-in extension MIT-SHM
[ 10.849] Initializing built-in extension XInputExtension
[ 10.849] Initializing built-in extension XTEST
[ 10.849] Initializing built-in extension BIG-REQUESTS
[ 10.849] Initializing built-in extension SYNC
[ 10.849] Initializing built-in extension XKEYBOARD
[ 10.849] Initializing built-in extension XC-MISC
[ 10.849] Initializing built-in extension SECURITY
[ 10.849] Initializing built-in extension XINERAMA
[ 10.849] Initializing built-in extension XFIXES
[ 10.849] Initializing built-in extension RENDER
[ 10.849] Initializing built-in extension RANDR
[ 10.849] Initializing built-in extension COMPOSITE
[ 10.849] Initializing built-in extension DAMAGE
[ 10.849] Initializing built-in extension MIT-SCREEN-SAVER
[ 10.849] Initializing built-in extension DOUBLE-BUFFER
[ 10.849] Initializing built-in extension RECORD
[ 10.849] Initializing built-in extension DPMS
[ 10.849] Initializing built-in extension X-Resource
[ 10.849] Initializing built-in extension XVideo
[ 10.849] Initializing built-in extension XVideo-MotionCompensation
[ 10.849] Initializing built-in extension XFree86-VidModeExtension
[ 10.849] Initializing built-in extension XFree86-DGA
[ 10.849] Initializing built-in extension XFree86-DRI
[ 10.849] Initializing built-in extension DRI2
[ 10.849] (II) LoadModule: "glx"
[ 10.899] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.088] (II) Module glx: vendor="NVIDIA Corporation"
[ 13.088] compiled for 4.0.2, module version = 1.0.0
[ 13.088] Module class: X.Org Server Extension
[ 13.088] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012
[ 13.088] Loading extension GLX
[ 13.088] (II) LoadModule: "nvidia"
[ 13.110] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 13.425] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 13.425] compiled for 4.0.2, module version = 1.0.0
[ 13.425] Module class: X.Org Video Driver
[ 13.511] (II) NVIDIA dlloader X Driver 310.19 Thu Nov 8 00:53:33 PST 2012
[ 13.511] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 13.541] (++) using VT number 7
[ 13.563] (II) Loading sub module "wfb"
[ 13.563] (II) LoadModule: "wfb"
[ 13.564] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 13.626] (II) Module wfb: vendor="X.Org Foundation"
[ 13.626] compiled for 1.13.0, module version = 1.0.0
[ 13.626] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.626] (II) Loading sub module "ramdac"
[ 13.626] (II) LoadModule: "ramdac"
[ 13.626] (II) Module "ramdac" already built-in
[ 13.651] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 13.651] (==) NVIDIA(0): RGB weight 888
[ 13.651] (==) NVIDIA(0): Default visual is TrueColor
[ 13.651] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.651] (**) NVIDIA(0): Option "Stereo" "0"
[ 13.651] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "CRT-0"
[ 13.651] (**) NVIDIA(0): Option "ModeDebug" "1"
[ 13.651] (**) NVIDIA(0): Stereo disabled by request
[ 13.671] (**) NVIDIA(0): Option "MetaModes" "1920x1080 +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0"
[ 13.671] (**) NVIDIA(0): Enabling 2D acceleration
[ 13.729] (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module. Please see the
[ 13.729] (EE) NVIDIA(0): system's kernel log for additional error messages and
[ 13.730] (EE) NVIDIA(0): consult the NVIDIA README for details.
[ 13.730] (EE) NVIDIA(0): *** Aborting ***
[ 13.730] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 13.730] (II) UnloadModule: "nvidia"
[ 13.730] (II) UnloadSubModule: "wfb"
[ 13.730] (EE) Screen(s) found, but none have a usable configuration.
[ 13.730]
Fatal server error:
[ 13.730] no screens found
[ 13.730] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 13.730] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 13.730] (EE)
[ 13.781] Server terminated with error (1). Closing log file.
There were no additional error messages that I could find. Files like /var/log/errors.log /var/log/kernel.log were empty.
I don't see why there's any reason Nvidia should be throwing a fit...the drivers are stated to be compatible with my card. Anyone have any ideas?
xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 304.60 ([email protected]) Sun Oct 14 21:34:33 PDT 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Ancor Communications Inc ASUS VH242H"
HorizSync 30.0 - 85.0
VertRefresh 55.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560"
Option "ModeDebug" "1"
EndSection
Section "Screen"
# Removed Option "metamodes" "nvidia-auto-select +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "nvidiaXineramaInfoOrder" "CRT-0"
Option "Stereo" "0"
Option "metamodes" "1920x1080 +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=996407e6-20a3-422f-92f8-3d9fe913b87c ro quiet add_efi_memmap
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ceff9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ceffa000-0x00000000cf082fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf083000-0x00000000cf089fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cf08a000-0x00000000cf2b7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf2b8000-0x00000000cf2b8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf2b9000-0x00000000cf2c8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf2c9000-0x00000000cf2cffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf2d0000-0x00000000cf2f6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf2f7000-0x00000000cf4f9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf4fa000-0x00000000cf783fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf784000-0x00000000cfef5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cfef6000-0x00000000cfefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000022effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.10 by American Megatrends
[ 0.000000] efi: SMBIOS=0xf0480 ACPI=0xcf083000 ACPI 2.0=0xcf083000 MPS=0xfcab0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000007f000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000007f000-0x0000000000080000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000080000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fd0000) (14MB)
[ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000000fd0000-0x0000000001000000) (0MB)
[ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
[ 0.000000] efi: mem07: type=4, attr=0xf, range=[0x0000000001100000-0x0000000001343000) (2MB)
[ 0.000000] efi: mem08: type=3, attr=0xf, range=[0x0000000001343000-0x0000000001347000) (0MB)
[ 0.000000] efi: mem09: type=4, attr=0xf, range=[0x0000000001347000-0x0000000001377000) (0MB)
[ 0.000000] efi: mem10: type=3, attr=0xf, range=[0x0000000001377000-0x000000000137e000) (0MB)
[ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x000000000137e000-0x0000000001381000) (0MB)
[ 0.000000] efi: mem12: type=3, attr=0xf, range=[0x0000000001381000-0x0000000001385000) (0MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000001385000-0x0000000001386000) (0MB)
[ 0.000000] efi: mem14: type=3, attr=0xf, range=[0x0000000001386000-0x0000000001388000) (0MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x0000000001388000-0x000000000138a000) (0MB)
[ 0.000000] efi: mem16: type=3, attr=0xf, range=[0x000000000138a000-0x000000000138b000) (0MB)
[ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x000000000138b000-0x000000000138c000) (0MB)
[ 0.000000] efi: mem18: type=3, attr=0xf, range=[0x000000000138c000-0x000000000138d000) (0MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x000000000138d000-0x000000000138e000) (0MB)
[ 0.000000] efi: mem20: type=3, attr=0xf, range=[0x000000000138e000-0x000000000138f000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x000000000138f000-0x0000000001395000) (0MB)
[ 0.000000] efi: mem22: type=3, attr=0xf, range=[0x0000000001395000-0x0000000001397000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x0000000001397000-0x00000000013ab000) (0MB)
[ 0.000000] efi: mem24: type=3, attr=0xf, range=[0x00000000013ab000-0x00000000013b3000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000013b3000-0x00000000013c3000) (0MB)
[ 0.000000] efi: mem26: type=3, attr=0xf, range=[0x00000000013c3000-0x00000000013cb000) (0MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000013cb000-0x00000000013d1000) (0MB)
[ 0.000000] efi: mem28: type=3, attr=0xf, range=[0x00000000013d1000-0x00000000013f5000) (0MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000013f5000-0x00000000013f7000) (0MB)
[ 0.000000] efi: mem30: type=3, attr=0xf, range=[0x00000000013f7000-0x00000000013f8000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000013f8000-0x00000000022eb000) (14MB)
[ 0.000000] efi: mem32: type=3, attr=0xf, range=[0x00000000022eb000-0x00000000022ef000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x00000000022ef000-0x00000000022fc000) (0MB)
[ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000022fc000-0x000000000230d000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x000000000230d000-0x0000000002313000) (0MB)
[ 0.000000] efi: mem36: type=3, attr=0xf, range=[0x0000000002313000-0x0000000002319000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x0000000002319000-0x0000000002321000) (0MB)
[ 0.000000] efi: mem38: type=3, attr=0xf, range=[0x0000000002321000-0x0000000002333000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x0000000002333000-0x0000000002338000) (0MB)
[ 0.000000] efi: mem40: type=3, attr=0xf, range=[0x0000000002338000-0x0000000002339000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x0000000002339000-0x0000000002344000) (0MB)
[ 0.000000] efi: mem42: type=3, attr=0xf, range=[0x0000000002344000-0x0000000002345000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x0000000002345000-0x0000000002347000) (0MB)
[ 0.000000] efi: mem44: type=3, attr=0xf, range=[0x0000000002347000-0x0000000002362000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x0000000002362000-0x0000000002368000) (0MB)
[ 0.000000] efi: mem46: type=3, attr=0xf, range=[0x0000000002368000-0x0000000002370000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x0000000002370000-0x0000000002375000) (0MB)
[ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x0000000002375000-0x0000000002388000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x0000000002388000-0x000000000238f000) (0MB)
[ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x000000000238f000-0x0000000002396000) (0MB)
[ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x0000000002396000-0x00000000023af000) (0MB)
[ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x00000000023af000-0x00000000023b2000) (0MB)
[ 0.000000] efi: mem53: type=4, attr=0xf, range=[0x00000000023b2000-0x0000000002403000) (0MB)
[ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x0000000002403000-0x0000000002404000) (0MB)
[ 0.000000] efi: mem55: type=4, attr=0xf, range=[0x0000000002404000-0x0000000002406000) (0MB)
[ 0.000000] efi: mem56: type=3, attr=0xf, range=[0x0000000002406000-0x000000000240c000) (0MB)
[ 0.000000] efi: mem57: type=4, attr=0xf, range=[0x000000000240c000-0x0000000002415000) (0MB)
[ 0.000000] efi: mem58: type=3, attr=0xf, range=[0x0000000002415000-0x000000000241b000) (0MB)
[ 0.000000] efi: mem59: type=4, attr=0xf, range=[0x000000000241b000-0x0000000002420000) (0MB)
[ 0.000000] efi: mem60: type=3, attr=0xf, range=[0x0000000002420000-0x0000000002426000) (0MB)
[ 0.000000] efi: mem61: type=4, attr=0xf, range=[0x0000000002426000-0x0000000002428000) (0MB)
[ 0.000000] efi: mem62: type=3, attr=0xf, range=[0x0000000002428000-0x000000000242b000) (0MB)
[ 0.000000] efi: mem63: type=4, attr=0xf, range=[0x000000000242b000-0x000000000242f000) (0MB)
[ 0.000000] efi: mem64: type=3, attr=0xf, range=[0x000000000242f000-0x0000000002430000) (0MB)
[ 0.000000] efi: mem65: type=4, attr=0xf, range=[0x0000000002430000-0x000000000279a000) (3MB)
[ 0.000000] efi: mem66: type=3, attr=0xf, range=[0x000000000279a000-0x000000000279f000) (0MB)
[ 0.000000] efi: mem67: type=4, attr=0xf, range=[0x000000000279f000-0x00000000027a4000) (0MB)
[ 0.000000] efi: mem68: type=3, attr=0xf, range=[0x00000000027a4000-0x00000000027a5000) (0MB)
[ 0.000000] efi: mem69: type=4, attr=0xf, range=[0x00000000027a5000-0x00000000027a7000) (0MB)
[ 0.000000] efi: mem70: type=3, attr=0xf, range=[0x00000000027a7000-0x00000000027ab000) (0MB)
[ 0.000000] efi: mem71: type=4, attr=0xf, range=[0x00000000027ab000-0x00000000027ac000) (0MB)
[ 0.000000] efi: mem72: type=3, attr=0xf, range=[0x00000000027ac000-0x00000000027b0000) (0MB)
[ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x00000000027b0000-0x00000000027b7000) (0MB)
[ 0.000000] efi: mem74: type=3, attr=0xf, range=[0x00000000027b7000-0x00000000027b9000) (0MB)
[ 0.000000] efi: mem75: type=4, attr=0xf, range=[0x00000000027b9000-0x00000000027c2000) (0MB)
[ 0.000000] efi: mem76: type=3, attr=0xf, range=[0x00000000027c2000-0x00000000027c6000) (0MB)
[ 0.000000] efi: mem77: type=4, attr=0xf, range=[0x00000000027c6000-0x00000000027ce000) (0MB)
[ 0.000000] efi: mem78: type=3, attr=0xf, range=[0x00000000027ce000-0x00000000027d0000) (0MB)
[ 0.000000] efi: mem79: type=4, attr=0xf, range=[0x00000000027d0000-0x00000000027db000) (0MB)
[ 0.000000] efi: mem80: type=3, attr=0xf, range=[0x00000000027db000-0x0000000002b3d000) (3MB)
[ 0.000000] efi: mem81: type=4, attr=0xf, range=[0x0000000002b3d000-0x0000000002b41000) (0MB)
[ 0.000000] efi: mem82: type=3, attr=0xf, range=[0x0000000002b41000-0x0000000002b47000) (0MB)
[ 0.000000] efi: mem83: type=4, attr=0xf, range=[0x0000000002b47000-0x0000000002b49000) (0MB)
[ 0.000000] efi: mem84: type=3, attr=0xf, range=[0x0000000002b49000-0x0000000002b4b000) (0MB)
[ 0.000000] efi: mem85: type=4, attr=0xf, range=[0x0000000002b4b000-0x0000000002b5a000) (0MB)
[ 0.000000] efi: mem86: type=3, attr=0xf, range=[0x0000000002b5a000-0x0000000002b5c000) (0MB)
[ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x0000000002b5c000-0x0000000002b61000) (0MB)
[ 0.000000] efi: mem88: type=3, attr=0xf, range=[0x0000000002b61000-0x0000000002b72000) (0MB)
[ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x0000000002b72000-0x0000000002b7a000) (0MB)
[ 0.000000] efi: mem90: type=3, attr=0xf, range=[0x0000000002b7a000-0x0000000002b7c000) (0MB)
[ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x0000000002b7c000-0x0000000002b81000) (0MB)
[ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x0000000002b81000-0x0000000002b86000) (0MB)
[ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x0000000002b86000-0x0000000002b8e000) (0MB)
[ 0.000000] efi: mem94: type=3, attr=0xf, range=[0x0000000002b8e000-0x0000000002b92000) (0MB)
[ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x0000000002b92000-0x0000000002bc8000) (0MB)
[ 0.000000] efi: mem96: type=3, attr=0xf, range=[0x0000000002bc8000-0x0000000002bdd000) (0MB)
[ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x0000000002bdd000-0x0000000002da2000) (1MB)
[ 0.000000] efi: mem98: type=3, attr=0xf, range=[0x0000000002da2000-0x0000000002da4000) (0MB)
[ 0.000000] efi: mem99: type=4, attr=0xf, range=[0x0000000002da4000-0x0000000002da6000) (0MB)
[ 0.000000] efi: mem100: type=3, attr=0xf, range=[0x0000000002da6000-0x0000000002da7000) (0MB)
[ 0.000000] efi: mem101: type=4, attr=0xf, range=[0x0000000002da7000-0x0000000002daf000) (0MB)
[ 0.000000] efi: mem102: type=3, attr=0xf, range=[0x0000000002daf000-0x0000000002db3000) (0MB)
[ 0.000000] efi: mem103: type=4, attr=0xf, range=[0x0000000002db3000-0x000000000321d000) (4MB)
[ 0.000000] efi: mem104: type=3, attr=0xf, range=[0x000000000321d000-0x000000000322f000) (0MB)
[ 0.000000] efi: mem105: type=4, attr=0xf, range=[0x000000000322f000-0x0000000003318000) (0MB)
[ 0.000000] efi: mem106: type=3, attr=0xf, range=[0x0000000003318000-0x0000000003387000) (0MB)
[ 0.000000] efi: mem107: type=4, attr=0xf, range=[0x0000000003387000-0x000000000338c000) (0MB)
[ 0.000000] efi: mem108: type=3, attr=0xf, range=[0x000000000338c000-0x000000000338e000) (0MB)
[ 0.000000] efi: mem109: type=4, attr=0xf, range=[0x000000000338e000-0x0000000003393000) (0MB)
[ 0.000000] efi: mem110: type=3, attr=0xf, range=[0x0000000003393000-0x0000000003397000) (0MB)
[ 0.000000] efi: mem111: type=4, attr=0xf, range=[0x0000000003397000-0x000000000339c000) (0MB)
[ 0.000000] efi: mem112: type=3, attr=0xf, range=[0x000000000339c000-0x000000000339e000) (0MB)
[ 0.000000] efi: mem113: type=4, attr=0xf, range=[0x000000000339e000-0x00000000033a1000) (0MB)
[ 0.000000] efi: mem114: type=3, attr=0xf, range=[0x00000000033a1000-0x00000000033a3000) (0MB)
[ 0.000000] efi: mem115: type=4, attr=0xf, range=[0x00000000033a3000-0x00000000033a6000) (0MB)
[ 0.000000] efi: mem116: type=7, attr=0xf, range=[0x00000000033a6000-0x00000000033c2000) (0MB)
[ 0.000000] efi: mem117: type=4, attr=0xf, range=[0x00000000033c2000-0x0000000003643000) (2MB)
[ 0.000000] efi: mem118: type=7, attr=0xf, range=[0x0000000003643000-0x0000000003662000) (0MB)
[ 0.000000] efi: mem119: type=4, attr=0xf, range=[0x0000000003662000-0x00000000037dc000) (1MB)
[ 0.000000] efi: mem120: type=1, attr=0xf, range=[0x00000000037dc000-0x00000000037fa000) (0MB)
[ 0.000000] efi: mem121: type=7, attr=0xf, range=[0x00000000037fa000-0x00000000037fb000) (0MB)
[ 0.000000] efi: mem122: type=4, attr=0xf, range=[0x00000000037fb000-0x00000000038ab000) (0MB)
[ 0.000000] efi: mem123: type=7, attr=0xf, range=[0x00000000038ab000-0x00000000038cc000) (0MB)
[ 0.000000] efi: mem124: type=4, attr=0xf, range=[0x00000000038cc000-0x00000000038ed000) (0MB)
[ 0.000000] efi: mem125: type=7, attr=0xf, range=[0x00000000038ed000-0x0000000004000000) (7MB)
[ 0.000000] efi: mem126: type=2, attr=0xf, range=[0x0000000004000000-0x0000000004ed0000) (14MB)
[ 0.000000] efi: mem127: type=7, attr=0xf, range=[0x0000000004ed0000-0x0000000036f52000) (800MB)
[ 0.000000] efi: mem128: type=2, attr=0xf, range=[0x0000000036f52000-0x00000000377a1000) (8MB)
[ 0.000000] efi: mem129: type=7, attr=0xf, range=[0x00000000377a1000-0x000000009be61000) (1606MB)
[ 0.000000] efi: mem130: type=2, attr=0xf, range=[0x000000009be61000-0x00000000ceffa000) (817MB)
[ 0.000000] efi: mem131: type=10, attr=0xf, range=[0x00000000ceffa000-0x00000000cf083000) (0MB)
[ 0.000000] efi: mem132: type=9, attr=0xf, range=[0x00000000cf083000-0x00000000cf08a000) (0MB)
[ 0.000000] efi: mem133: type=6, attr=0x800000000000000f, range=[0x00000000cf08a000-0x00000000cf165000) (0MB)
[ 0.000000] efi: mem134: type=0, attr=0xf, range=[0x00000000cf165000-0x00000000cf278000) (1MB)
[ 0.000000] efi: mem135: type=6, attr=0x800000000000000f, range=[0x00000000cf278000-0x00000000cf27c000) (0MB)
[ 0.000000] efi: mem136: type=0, attr=0xf, range=[0x00000000cf27c000-0x00000000cf2b1000) (0MB)
[ 0.000000] efi: mem137: type=5, attr=0x800000000000000f, range=[0x00000000cf2b1000-0x00000000cf2b7000) (0MB)
[ 0.000000] efi: mem138: type=6, attr=0x800000000000000f, range=[0x00000000cf2b7000-0x00000000cf2b8000) (0MB)
[ 0.000000] efi: mem139: type=10, attr=0xf, range=[0x00000000cf2b8000-0x00000000cf2b9000) (0MB)
[ 0.000000] efi: mem140: type=0, attr=0xf, range=[0x00000000cf2b9000-0x00000000cf2c9000) (0MB)
[ 0.000000] efi: mem141: type=10, attr=0xf, range=[0x00000000cf2c9000-0x00000000cf2d0000) (0MB)
[ 0.000000] efi: mem142: type=5, attr=0x800000000000000f, range=[0x00000000cf2d0000-0x00000000cf2d2000) (0MB)
[ 0.000000] efi: mem143: type=6, attr=0x800000000000000f, range=[0x00000000cf2d2000-0x00000000cf2e4000) (0MB)
[ 0.000000] efi: mem144: type=5, attr=0x800000000000000f, range=[0x00000000cf2e4000-0x00000000cf2f4000) (0MB)
[ 0.000000] efi: mem145: type=6, attr=0x800000000000000f, range=[0x00000000cf2f4000-0x00000000cf2f7000) (0MB)
[ 0.000000] efi: mem146: type=10, attr=0xf, range=[0x00000000cf2f7000-0x00000000cf4fa000) (2MB)
[ 0.000000] efi: mem147: type=3, attr=0xf, range=[0x00000000cf4fa000-0x00000000cf776000) (2MB)
[ 0.000000] efi: mem148: type=4, attr=0xf, range=[0x00000000cf776000-0x00000000cf779000) (0MB)
[ 0.000000] efi: mem149: type=3, attr=0xf, range=[0x00000000cf779000-0x00000000cf784000) (0MB)
[ 0.000000] efi: mem150: type=6, attr=0x800000000000000f, range=[0x00000000cf784000-0x00000000cfef6000) (7MB)
[ 0.000000] efi: mem151: type=3, attr=0xf, range=[0x00000000cfef6000-0x00000000cff00000) (0MB)
[ 0.000000] efi: mem152: type=7, attr=0xf, range=[0x0000000100001000-0x000000022f000000) (4847MB)
[ 0.000000] efi: mem153: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem154: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
[ 0.000000] efi: mem155: type=11, attr=0x8000000000000001, range=[0x00000000fec20000-0x00000000fec21000) (0MB)
[ 0.000000] efi: mem156: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
[ 0.000000] efi: mem157: type=11, attr=0x8000000000000001, range=[0x00000000fed61000-0x00000000fed71000) (0MB)
[ 0.000000] efi: mem158: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed90000) (0MB)
[ 0.000000] efi: mem159: type=11, attr=0x8000000000000001, range=[0x00000000fef00000-0x0000000100000000) (17MB)
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: MSI MS-7693/970A-G46 (MS-7693), BIOS V1.5 02/16/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFF00000 mask FFFFFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000022f000000 aka 8944M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcff00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcdc0-0x000fcdcf] mapped at [ffff8800000fcdc0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfefffff]
[ 0.000000] [mem 0x00000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcfefffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xcfefffff @ [mem 0x1fffd000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x22effffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
[ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G
[ 0.000000] [mem 0x200000000-0x22effffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x22effffff @ [mem 0xceff6000-0xceff9fff]
[ 0.000000] RAMDISK: [mem 0x36f52000-0x377a0fff]
[ 0.000000] ACPI: RSDP 00000000cf083000 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000cf083068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000cf088f50 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120711/tbfadt-598)
[ 0.000000] ACPI: DSDT 00000000cf083140 05E0A (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cf2caf80 00040
[ 0.000000] ACPI: APIC 00000000cf089048 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000cf0890e8 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 00000000cf089128 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
[ 0.000000] ACPI: SSDT 00000000cf089160 00B9C (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22effffff]
[ 0.000000] NODE_DATA [mem 0x22effc000-0x22effffff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226600000-ffff88022e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x22effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0xceff9fff]
[ 0.000000] node 0: [mem 0xcf4fa000-0xcf783fff]
[ 0.000000] node 0: [mem 0xcfef6000-0xcfefffff]
[ 0.000000] node 0: [mem 0x100001000-0x22effffff]
[ 0.000000] On node 0 totalpages: 2089501
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 11 pages reserved
[ 0.000000] DMA zone: 3909 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 828110 pages, LIFO batch:31
[ 0.000000] Normal zone: 19392 pages used for memmap
[ 0.000000] Normal zone: 1221695 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000ceffa000 - 00000000cf083000
[ 0.000000] PM: Registered nosave memory: 00000000cf083000 - 00000000cf08a000
[ 0.000000] PM: Registered nosave memory: 00000000cf08a000 - 00000000cf2b8000
[ 0.000000] PM: Registered nosave memory: 00000000cf2b8000 - 00000000cf2b9000
[ 0.000000] PM: Registered nosave memory: 00000000cf2b9000 - 00000000cf2c9000
[ 0.000000] PM: Registered nosave memory: 00000000cf2c9000 - 00000000cf2d0000
[ 0.000000] PM: Registered nosave memory: 00000000cf2d0000 - 00000000cf2f7000
[ 0.000000] PM: Registered nosave memory: 00000000cf2f7000 - 00000000cf4fa000
[ 0.000000] PM: Registered nosave memory: 00000000cf784000 - 00000000cfef6000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
[ 0.000000] PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
[ 0.000000] PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
[ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
[ 0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
[ 0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
[ 0.000000] e820: [mem 0xcff00000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022ec00000 s84608 r8192 d21888 u262144
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2053714
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=996407e6-20a3-422f-92f8-3d9fe913b87c ro quiet add_efi_memmap
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ c4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 8031632k/9158656k available (4727k kernel code, 800652k absent, 326372k reserved, 4143k data, 768k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:4352 nr_irqs:1288 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3600.223 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7203.46 BogoMIPS (lpj=12000743)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.002170] Security Framework initialized
[ 0.002173] AppArmor: AppArmor disabled by boot time parameter
[ 0.002659] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.004635] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005496] Mount-cache hash table entries: 256
[ 0.005659] Initializing cgroup subsys cpuacct
[ 0.005660] Initializing cgroup subsys memory
[ 0.005668] Initializing cgroup subsys devices
[ 0.005669] Initializing cgroup subsys freezer
[ 0.005670] Initializing cgroup subsys net_cls
[ 0.005671] Initializing cgroup subsys blkio
[ 0.005689] tseg: 00cff00000
[ 0.005691] CPU: Physical Processor ID: 0
[ 0.005691] CPU: Processor Core ID: 0
[ 0.005693] mce: CPU supports 7 MCE banks
[ 0.005698] LVT offset 1 assigned for vector 0xf9
[ 0.005703] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
tlb_flushall_shift is 0xffffffff
[ 0.006360] ACPI: Core revision 20120711
[ 0.027571] ftrace: allocating 18347 entries in 72 pages
[ 0.034694] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067650] smpboot: CPU0: AMD FX(tm)-4100 Quad-Core Processor stepping 02
[ 0.173402] Performance Events:
[ 0.173403] perf: AMD core performance counters detected
[ 0.173405] AMD PMU driver.
[ 0.173406] ... version: 0
[ 0.173407] ... bit width: 48
[ 0.173408] ... generic registers: 6
[ 0.173409] ... value mask: 0000ffffffffffff
[ 0.173410] ... max period: 00007fffffffffff
[ 0.173410] ... fixed-purpose events: 0
[ 0.173411] ... event mask: 000000000000003f
[ 0.200070] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.213354] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.276446] Brought up 4 CPUs
[ 0.276449] smpboot: Total of 4 processors activated (28813.85 BogoMIPS)
[ 0.283152] devtmpfs: initialized
[ 0.284932] PM: Registering ACPI NVS region [mem 0xceffa000-0xcf082fff] (561152 bytes)
[ 0.284943] PM: Registering ACPI NVS region [mem 0xcf2b8000-0xcf2b8fff] (4096 bytes)
[ 0.284944] PM: Registering ACPI NVS region [mem 0xcf2c9000-0xcf2cffff] (28672 bytes)
[ 0.284945] PM: Registering ACPI NVS region [mem 0xcf2f7000-0xcf4f9fff] (2109440 bytes)
[ 0.285814] NET: Registered protocol family 16
[ 0.285972] ACPI: bus type pci registered
[ 0.286025] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.286027] PCI: not using MMCONFIG
[ 0.286029] PCI: Using configuration type 1 for base access
[ 0.286029] PCI: Using configuration type 1 for extended access
[ 0.286582] bio: create slab <bio-0> at 0
[ 0.286639] ACPI: Added _OSI(Module Device)
[ 0.286640] ACPI: Added _OSI(Processor Device)
[ 0.286641] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.286642] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.287530] ACPI: EC: Look up EC in DSDT
[ 0.288539] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.291751] ACPI: Interpreter enabled
[ 0.291756] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.291773] ACPI: Using IOAPIC for interrupt routing
[ 0.291909] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.291948] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.314838] ACPI: No dock devices found.
[ 0.314841] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.315011] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.315266] PCI host bridge to bus 0000:00
[ 0.315269] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 0.315271] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.315272] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.315274] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.315276] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.315277] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.315279] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.315280] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.315282] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
[ 0.315292] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.315353] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.315386] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.315400] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[ 0.315432] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.315459] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[ 0.315474] pci 0000:00:11.0: reg 10: [io 0xf090-0xf097]
[ 0.315481] pci 0000:00:11.0: reg 14: [io 0xf080-0xf083]
[ 0.315488] pci 0000:00:11.0: reg 18: [io 0xf070-0xf077]
[ 0.315496] pci 0000:00:11.0: reg 1c: [io 0xf060-0xf063]
[ 0.315503] pci 0000:00:11.0: reg 20: [io 0xf050-0xf05f]
[ 0.315510] pci 0000:00:11.0: reg 24: [mem 0xfe20b000-0xfe20b3ff]
[ 0.315526] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.315563] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.315573] pci 0000:00:12.0: reg 10: [mem 0xfe20a000-0xfe20afff]
[ 0.315628] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.315642] pci 0000:00:12.2: reg 10: [mem 0xfe209000-0xfe2090ff]
[ 0.315704] pci 0000:00:12.2: supports D1 D2
[ 0.315706] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.315724] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.315734] pci 0000:00:13.0: reg 10: [mem 0xfe208000-0xfe208fff]
[ 0.315788] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.315803] pci 0000:00:13.2: reg 10: [mem 0xfe207000-0xfe2070ff]
[ 0.315865] pci 0000:00:13.2: supports D1 D2
[ 0.315866] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.315884] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.315941] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.315951] pci 0000:00:14.1: reg 10: [io 0xf040-0xf047]
[ 0.315958] pci 0000:00:14.1: reg 14: [io 0xf030-0xf033]
[ 0.315966] pci 0000:00:14.1: reg 18: [io 0xf020-0xf027]
[ 0.315973] pci 0000:00:14.1: reg 1c: [io 0xf010-0xf013]
[ 0.315980] pci 0000:00:14.1: reg 20: [io 0xf000-0xf00f]
[ 0.316009] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.316026] pci 0000:00:14.2: reg 10: [mem 0xfe200000-0xfe203fff 64bit]
[ 0.316076] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.316087] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.316145] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.316177] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.316188] pci 0000:00:14.5: reg 10: [mem 0xfe206000-0xfe206fff]
[ 0.316242] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.316298] pci 0000:00:15.0: supports D1 D2
[ 0.316320] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.316330] pci 0000:00:16.0: reg 10: [mem 0xfe205000-0xfe205fff]
[ 0.316384] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.316399] pci 0000:00:16.2: reg 10: [mem 0xfe204000-0xfe2040ff]
[ 0.316461] pci 0000:00:16.2: supports D1 D2
[ 0.316463] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.316481] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.316499] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.316516] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.316531] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.316549] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.316563] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.316603] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
[ 0.316614] pci 0000:01:00.0: [10de:1201] type 00 class 0x030000
[ 0.316623] pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfdffffff]
[ 0.316632] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.316641] pci 0000:01:00.0: reg 1c: [mem 0xd8000000-0xdbffffff 64bit pref]
[ 0.316647] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
[ 0.316654] pci 0000:01:00.0: reg 30: [mem 0xfe000000-0xfe07ffff pref]
[ 0.316704] pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
[ 0.316713] pci 0000:01:00.1: reg 10: [mem 0xfe080000-0xfe083fff]
[ 0.323182] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.323186] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.323188] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfe0fffff]
[ 0.323191] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
[ 0.323213] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
[ 0.323233] pci 0000:02:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.323250] pci 0000:02:00.0: reg 10: [mem 0xfe100000-0xfe107fff 64bit]
[ 0.323333] pci 0000:02:00.0: PME# supported from D3hot
[ 0.329835] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.329839] pci 0000:00:04.0: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.329853] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
[ 0.329895] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.329901] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.329903] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.329905] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.329906] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.329908] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.329909] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.329911] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[ 0.329946] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-ff]
[ 0.329965] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.329981] pci 0000:04:00.0: reg 10: [io 0xd000-0xd0ff]
[ 0.330006] pci 0000:04:00.0: reg 18: [mem 0xdc104000-0xdc104fff 64bit pref]
[ 0.330023] pci 0000:04:00.0: reg 20: [mem 0xdc100000-0xdc103fff 64bit pref]
[ 0.330094] pci 0000:04:00.0: supports D1 D2
[ 0.330095] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.336494] pci 0000:00:15.0: PCI bridge to [bus 04]
[ 0.336499] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
[ 0.336505] pci 0000:00:15.0: bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
[ 0.336519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.336629] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.336688] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[ 0.336720] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
[ 0.336748] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT]
[ 0.336787] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.336789] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.342737] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.342794] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.342852] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.342911] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.342960] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.342994] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.343028] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.343061] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.343142] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.343144] vgaarb: loaded
[ 0.343145] vgaarb: bridge control possible 0000:01:00.0
[ 0.343179] PCI: Using ACPI for IRQ routing
[ 0.349476] PCI: pci_cache_line_size set to 64 bytes
[ 0.349547] e820: reserve RAM buffer [mem 0xceffa000-0xcfffffff]
[ 0.349550] e820: reserve RAM buffer [mem 0xcf784000-0xcfffffff]
[ 0.349551] e820: reserve RAM buffer [mem 0xcff00000-0xcfffffff]
[ 0.349552] e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
[ 0.349635] NetLabel: Initializing
[ 0.349636] NetLabel: domain hash size = 128
[ 0.349637] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.349648] NetLabel: unlabeled traffic allowed by default
[ 0.349661] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.349664] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.351698] Switching to clocksource hpet
[ 0.357083] pnp: PnP ACPI init
[ 0.357093] ACPI: bus type pnp registered
[ 0.357237] pnp 00:00: [bus 00-ff]
[ 0.357241] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.357242] pnp 00:00: [io 0x0000-0x03af window]
[ 0.357244] pnp 00:00: [io 0x03e0-0x0cf7 window]
[ 0.357245] pnp 00:00: [io 0x03b0-0x03df window]
[ 0.357247] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.357249] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.357250] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.357252] pnp 00:00: [mem 0xd0000000-0xffffffff window]
[ 0.357253] pnp 00:00: [mem 0x00000000 window]
[ 0.357288] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.357318] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.357355] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.357358] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.357571] pnp 00:02: [io 0x040b]
[ 0.357572] pnp 00:02: [io 0x04d6]
[ 0.357574] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.357575] pnp 00:02: [io 0x0c14]
[ 0.357576] pnp 00:02: [io 0x0c50-0x0c51]
[ 0.357578] pnp 00:02: [io 0x0c52]
[ 0.357579] pnp 00:02: [io 0x0c6c]
[ 0.357580] pnp 00:02: [io 0x0c6f]
[ 0.357581] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.357583] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.357584] pnp 00:02: [io 0x0cd4-0x0cd5]
[ 0.357585] pnp 00:02: [io 0x0cd6-0x0cd7]
[ 0.357586] pnp 00:02: [io 0x0cd8-0x0cdf]
[ 0.357588] pnp 00:02: [io 0x0800-0x089f]
[ 0.357589] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.357591] pnp 00:02: [io 0x0000-0x000f]
[ 0.357592] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.357593] pnp 00:02: [io 0x0900-0x090f]
[ 0.357594] pnp 00:02: [io 0x0910-0x091f]
[ 0.357596] pnp 00:02: [io 0xfe00-0xfefe]
[ 0.357597] pnp 00:02: [io 0x0060-0x005f disabled]
[ 0.357599] pnp 00:02: [io 0x0064-0x0063 disabled]
[ 0.357600] pnp 00:02: [io 0x0485-0x0486]
[ 0.357601] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[ 0.357603] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[ 0.357604] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
[ 0.357605] pnp 00:02: [mem 0xfed61000-0xfed70fff]
[ 0.357607] pnp 00:02: [mem 0xfec10000-0xfec10fff]
[ 0.357608] pnp 00:02: [mem 0xfed00000-0xfed00fff]
[ 0.357609] pnp 00:02: [mem 0xff800000-0xffffffff]
[ 0.357664] system 00:02: [io 0x040b] has been reserved
[ 0.357666] system 00:02: [io 0x04d6] has been reserved
[ 0.357668] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.357669] system 00:02: [io 0x0c14] has been reserved
[ 0.357671] system 00:02: [io 0x0c50-0x0c51] has been reserved
[ 0.357673] system 00:02: [io 0x0c52] has been reserved
[ 0.357674] system 00:02: [io 0x0c6c] has been reserved
[ 0.357676] system 00:02: [io 0x0c6f] has been reserved
[ 0.357677] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.357679] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.357681] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
[ 0.357682] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
[ 0.357684] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
[ 0.357687] system 00:02: [io 0x0800-0x089f] has been reserved
[ 0.357689] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.357690] system 00:02: [io 0x0900-0x090f] has been reserved
[ 0.357692] system 00:02: [io 0x0910-0x091f] has been reserved
[ 0.357694] system 00:02: [io 0xfe00-0xfefe] has been reserved
[ 0.357696] system 00:02: [io 0x0485-0x0486] has been reserved
[ 0.357698] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.357700] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.357702] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.357703] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.357705] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.357707] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.357709] system 00:02: [mem 0xff800000-0xffffffff] has been reserved
[ 0.357711] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.357836] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
[ 0.357839] pnp 00:03: [io 0x0a00-0x0a0f]
[ 0.357841] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
[ 0.357842] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
[ 0.357879] system 00:03: [io 0x0a00-0x0a0f] has been reserved
[ 0.357882] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358038] pnp 00:04: [io 0x03f8-0x03ff]
[ 0.358044] pnp 00:04: [irq 4]
[ 0.358046] pnp 00:04: [dma 0 disabled]
[ 0.358089] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.358099] pnp 00:05: [dma 4]
[ 0.358101] pnp 00:05: [io 0x0000-0x000f]
[ 0.358102] pnp 00:05: [io 0x0081-0x0083]
[ 0.358104] pnp 00:05: [io 0x0087]
[ 0.358105] pnp 00:05: [io 0x0089-0x008b]
[ 0.358106] pnp 00:05: [io 0x008f]
[ 0.358107] pnp 00:05: [io 0x00c0-0x00df]
[ 0.358127] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.358135] pnp 00:06: [io 0x0070-0x0071]
[ 0.358139] pnp 00:06: [irq 8]
[ 0.358160] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.358166] pnp 00:07: [io 0x0061]
[ 0.358187] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.358207] pnp 00:08: [io 0x0010-0x001f]
[ 0.358209] pnp 00:08: [io 0x0022-0x003f]
[ 0.358210] pnp 00:08: [io 0x0044-0x005f]
[ 0.358211] pnp 00:08: [io 0x0062-0x0063]
[ 0.358212] pnp 00:08: [io 0x0065-0x006f]
[ 0.358214] pnp 00:08: [io 0x0072-0x007f]
[ 0.358215] pnp 00:08: [io 0x0080]
[ 0.358216] pnp 00:08: [io 0x0084-0x0086]
[ 0.358217] pnp 00:08: [io 0x0088]
[ 0.358219] pnp 00:08: [io 0x008c-0x008e]
[ 0.358220] pnp 00:08: [io 0x0090-0x009f]
[ 0.358221] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.358224] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.358225] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.358267] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.358270] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358277] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.358280] pnp 00:09: [irq 13]
[ 0.358301] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.358347] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358474] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.358516] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358605] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.358607] pnp 00:0c: [mem 0xfec20000-0xfec200ff]
[ 0.358652] system 00:0c: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.358654] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358765] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[ 0.358797] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.358800] pnp: PnP ACPI: found 14 devices
[ 0.358801] ACPI: ACPI bus type pnp unregistered
[ 0.365282] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.365285] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.365288] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfe0fffff]
[ 0.365290] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
[ 0.365293] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.365296] pci 0000:00:04.0: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.365299] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.365308] pci 0000:00:15.0: PCI bridge to [bus 04]
[ 0.365310] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
[ 0.365315] pci 0000:00:15.0: bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
[ 0.365339] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.365341] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.365343] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.365344] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.365346] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.365347] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.365348] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
[ 0.365350] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.365351] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe0fffff]
[ 0.365353] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdbffffff 64bit pref]
[ 0.365354] pci_bus 0000:02: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 0.365356] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
[ 0.365357] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
[ 0.365359] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
[ 0.365360] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
[ 0.365362] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.365363] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.365365] pci_bus 0000:03: resource 10 [mem 0xd0000000-0xffffffff]
[ 0.365366] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.365368] pci_bus 0000:04: resource 2 [mem 0xdc100000-0xdc1fffff 64bit pref]
[ 0.365389] NET: Registered protocol family 2
[ 0.366003] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.367665] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.367870] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.367896] TCP: reno registered
[ 0.367908] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.367945] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.368031] NET: Registered protocol family 1
[ 0.674641] pci 0000:01:00.0: Boot video device
[ 0.674687] PCI: CLS 64 bytes, default 64
[ 0.674727] Unpacking initramfs...
[ 0.796668] Freeing initrd memory: 8508k freed
[ 0.798617] PCI-DMA: Disabling AGP.
[ 0.798682] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.798683] PCI-DMA: using GART IOMMU.
[ 0.798685] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.802600] LVT offset 0 assigned for vector 0x400
[ 0.802627] perf: AMD IBS detected (0x000000ff)
[ 0.802819] audit: initializing netlink socket (disabled)
[ 0.802834] type=2000 audit(1353475492.683:1): initialized
[ 0.811826] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.813829] VFS: Disk quotas dquot_6.5.2
[ 0.813869] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.813986] msgmni has been set to 15916
[ 0.814168] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.814209] io scheduler noop registered
[ 0.814210] io scheduler deadline registered
[ 0.814253] io scheduler cfq registered (default)
[ 0.814512] efifb: probing for efifb
[ 0.814782] efifb: framebuffer at 0xd9000000, mapped to 0xffffc90012780000, using 3072k, total 3072k
[ 0.814783] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.814784] efifb: scrolling: redraw
[ 0.814786] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.826475] Console: switching to colour frame buffer device 128x48
[ 0.838117] fb0: EFI VGA frame buffer device
[ 0.838139] GHES: HEST is not enabled!
[ 0.838191] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.858663] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.879351] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.879522] Linux agpgart interface v0.103
[ 0.879569] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.879885] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.879900] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.880017] mousedev: PS/2 mouse device common for all mice
[ 0.880045] rtc_cmos 00:06: RTC can wake from S4
[ 0.880140] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.880158] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.880165] cpuidle: using governor ladder
[ 0.880166] cpuidle: using governor menu
[ 0.880267] drop_monitor: Initializing network drop monitor service
[ 0.880322] TCP: cubic registered
[ 0.880410] NET: Registered protocol family 10
[ 0.880525] NET: Registered protocol family 17
[ 0.880532] Key type dns_resolver registered
[ 0.880798] PM: Hibernation image not present or could not be loaded.
[ 0.880804] registered taskstats version 1
[ 0.881453] rtc_cmos 00:06: setting system clock to 2012-11-21 05:24:53 UTC (1353475493)
[ 0.883256] Freeing unused kernel memory: 768k freed
[ 0.883387] Write protecting the kernel read-only data: 8192k
[ 0.888716] Freeing unused kernel memory: 1408k freed
[ 0.891110] Freeing unused kernel memory: 568k freed
[ 0.897826] systemd-udevd[53]: starting version 195
[ 0.899858] SCSI subsystem initialized
[ 0.900780] ACPI: bus type scsi registered
[ 0.900827] libata version 3.00 loaded.
[ 0.902143] scsi0 : pata_atiixp
[ 0.902492] scsi1 : pata_atiixp
[ 0.902632] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.902633] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.076344] ahci 0000:00:11.0: version 3.0
[ 1.076438] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.076440] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.077771] scsi2 : ahci
[ 1.078171] scsi3 : ahci
[ 1.078413] scsi4 : ahci
[ 1.078607] scsi5 : ahci
[ 1.078895] ata3: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b100 irq 19
[ 1.078899] ata4: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b180 irq 19
[ 1.078902] ata5: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b200 irq 19
[ 1.078905] ata6: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b280 irq 19
[ 1.396833] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.396862] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.563219] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.563244] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.565550] ata4.00: ATAPI: ASUS DRW-24B1ST c, 1.05, max UDMA/100
[ 1.566401] ata4.00: configured fUpdated first post with dmesg output. I added all of it, but here's a quick snippet of the tail (which is right after booting up and attempting to autostart SLiM)
[ 13.426857] NVRM: API mismatch: the client has the version 310.19, but
NVRM: this kernel module has the version 304.60. Please
NVRM: make sure that this kernel module and all NVIDIA driver
NVRM: components have the same version.
Why is the kernel getting 304.60 ? That's got to be the issue, but I don't why the kernel is getting 304.60 ...
Output of pacman -Qs nvidia:
local/conky-nvidia 1.9.0-2
An advanced, highly configurable system monitor for X based on torsmo
local/lib32-nvidia-utils 310.19-1
NVIDIA drivers utilities and libraries. (32-bit)
local/libvdpau-git-flashpatch 20120825-1
Nvidia VDPAU library from git with patch to fix flash blue tint and bleed through
local/libxnvctrl 304.51-1
NVIDIA X Ctrl library
local/nvidia 310.19-2
NVIDIA drivers for linux.
local/nvidia-utils 310.19-1
NVIDIA drivers utilities and libraries. -
Error message on my new 310 1125f touchsmart screen to choose aero theme in control panel did that
Just got my HP 310 1125f touchsmart 23rd of Feb 2012. Work good for two days, then on the touchscreen was a Error message
choose an Aero theme on the control page. Did this there are 7 different themes I tried all of them and none of them worked
even did a restart after each of them. What is the fix for this help me please. Maybe getting a touch screen wasn't a good idea.
Everything else works great.
mrstixHi Marilyn52,
Did you already try restarting the system? If HP takes over your computer, windows aero gets turned off for performance reasons. When you restart, the original theme should be back to the way it was.
If not you can try the following steps also:
Make sure that Windows Experience Index has been updated. For more information check: http://windows.microsoft.com/en-US/windows-vista/What-is-the-Windows-Experience-Index
The following steps will tell you how to turn on a Windows Aero theme for vista & 7.
Vista:
1. Right click your desktop and select "Personalize".
2. Click on "Theme"
3. You'll get a window which will list all available themes for windows vista, select Windows Aero here.
For Windows 7:
1. Right click your desktop and select "Personalize".
2. Here are all your themes including the Windows Aero ones, just select one of these.
It might be possible that you have to restart the computer.
If still not working, please let us know what kind of computer you have and what operating system it is.
Greetings
Philippe
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future! -
Workbook error 310 - save not possible
Hi,
when I want to save a workbook I receive error message 310 - saving not possible. Nothing in my authorizations where changed. In sdn I found also no hint.
Any idea?Hi,
Please check out the SAP Notes in the link:----
Error 310 when creating an workbook
REgards,
Suman -
hello, i just downloaded itunes on my acer laptop and its been giving me problems everytime i try to get on to the itunes store.. it gives me a message saying "itunes could not connect to the itunes store. an unknown error occurred. (310).plz help me out. i do have the internet on but it keeps giving me the same problems .. thanks..
Hi Young Prada,
If you are having issues connecting to the iTunes Store, you may find the following article helpful:
Apple Support: Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
- Brenden -
Printing Problem with Epson LX-300+ii and LX-310 in Windows Server 2012 R2 64-bit
I recently installed Windows Server 2012 R2 64-Bit.
We have Printer Epson LX-300+ii and LX-310 (dot-matrix) that we share among users. Each user access the Server using Remote Desktop. From previous experience with Windows Server 2008, I knew that these printers will be problematic, especially regarding
the Easy Print driver.
And I was right, using the Easy Print driver, I got the following result:
And so, I did manual mapping & disable the "Use Remote Desktop Easy Print printer driver first". Haha, what a surprise, I got the following result:
And so I uninstalled the printer driver, and install it again, thinking that I might chose a wrong driver, but.... same result. I know for sure that I chose the correct driver.
Next, I tried connecting the printer DIRECTLY to the server. Log-in to the Server directly,
not using Remote Desktop. And tried printing again, haha... really... what a surprise... I got the same problem here !!!
So now I know the problem is not the Easy Print driver, not mapping or registry problem either. It's the print driver. This is SUPER FRUSTRATING, I tried the same driver from the same CD in Windows 8.1 64-Bit with no problem. I tried it too in Windows 7
32-Bit with no-problem either. But somehow, this driver is problematic in Windows Server 2012 R2.
Any help? Anybody else bump into this same problem ? I'm close to giving up, been spending too much time figuring out this damn thing.
AndyHi Bulent Sahin,
Thank you for your reply, I tried IBM Graphics driver, but the result is equally as bad. But your answer inspire me to try different drivers. And so, the closest & best driver that I could use now is EPSON ESC/P 9pin V4 Class Driver
It's not as good as I would expect, but at least now, it's acceptable & readable. I can't believe that I'm the only one who have this problem
Thank you Mr. Sahin -
HOW DO I SET UP AN EPRINT ADDRESS FOR MY HP PHOTOSMART 310 SERIES ?
IT SAYS PRINTER'S EMAIL NOT ACTIVATED
I've tried everything to get this Photosmart Premium 310 working with ePrint, and it seems to me that either the printer or the service itself is defective.
The printer works on the network here: I can send a page to it and it prints out. However, every time I try to get the email address, it says, "Problem connecting to web services."
The printer shows two of five bars in the wireless section.
I have turned web services on and off.
I have moved the printer around.
I allowed the printer to remain "Initializing" all night, then unplugged it and re-started.
It seems to me that, if it can wirelessly accept a color page from my computer, it ought to be able to communicate with a server.
Should I return this to the store? -
I went to my local Apple Store with a display problem and was told 700 dollars to reair it there or send it in for a complete overhaul referbish for
310 plus tax. I took it home consulted with my wife she said for a 2008 310 wasn't bad. I brought it in and set I an agreement for the 310 and sent it in to returned in 3 to 5 days. I also read online that others had done the same theing. 3 Days later I get an email from Apple that the repair would cost more than 1200 dollars and do I want to repair it for that price. I called Tim Simpson and was told Apple doesn't honor agreements made at the retail store. Should Apple be obligated to honor it's contracts. I am assuming that Apple retail and Apple repair work for the same company. The hinge problem has been a problem and Apple had a free repair window for 6 months but didn't tell it's customers about it. At least I never heard from them. So when is a contract a contract and has Apple success lesoned it's famouse customer support. We have been using Mac's since the 80's and currently have 7 products currently in use in our household. I used to work for a computer consulting company and since moving to North Carolina moved completely to Apple. Is it time to revise that thinking. Thanks for you ear and inputHi,
Thanks for the response. The store told me everything would be fixed for 310 because the go through the entire computer and fix any problems they find. Now was that a written guarantee or a verbal assurance. To Bob if I wasn't told that the price would be lower then I wouldn't have bothered to send it in and we would use it until it stopped functioning and know one would be upset. It was at the store suggestion I sent it in and spent over an hour of my time traveling to an from the only Apple store in my area. I worked in technology for 12 years and have dealt with and performed customer service on a professional level. I have experience with contracts and if someone says we will do something for you writes up an invoice and does not say that it is up to the "depot" then there is a case to be made. -
HP Touchsmart 310-1125Y - Missing USB Receiver, how can you get a replacement?
I purchased an HP Touchsmart 310-1125Y all-in-one computer and the USB Receiver is missing. Does HP sell replacement receivers? I tried searching but just found the part number of the mouse. The mouse's part number is 603289-001 and the keyboard is KG-0981.
The mouse/keyboard are fine, just no USB receiver. Anyone have any luck with "generic" receivers if such a thing exist?Here are the specs for your HP TouchSmart 310-1125y Desktop Computer. According to the specs, this model was introduced for sale around two years ago. The specs also indicate that the USB mouse/keyboard wireless set use a 2.4GHz frequency. Have you checked on the bottom of the mouse??? Many mice have a little "pocket" to store the USB dongle. If the USB dongle is truly missing, HP's Part Surfer lists the mouse as "Part# 588485-001 - HP Mouse - Wireless, Optical (includes USB Receiver & Mouse)".
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
Can i add a second moniter to hp touchsmart 310
Just need to know if I can add a second monitor to my hp touchsmart 310 pc
I use a USB display adapter to provide a choice of two extra monitors for my Touchsmart 300. I run a 17" monitor on a VGA cable from the USB display adapter and when I want to watch movies I change to an HDMI cable connected to my 42" Plasma and run that as a second display in the loungeroom. With the HP wireless remote, I can control the video and with the wireless mouse and keyboard I can surf the net on the BIG SCREEN! Cool!
-
When I start homesharing I get an error 310 message and it won't let me go any further
When I log in to home sharing I get an error message, it says ERROR 310 and I have to close the programm.
Can someone help.
Kind regards
Tony RA quick search seems to infer that the rescue email field is optional, so try it without entering anything.
Otherwise:
if you have a Gmail email you can add or remove the full stops in it, so for example
[email protected] is the same as [email protected] as well as [email protected]
this would give you a second email for this setup.
Apple is basically asking you for a backup email account incase anything goes wrong.
If you do not have the option via Gmail or similar maybe use a friends or family members email, after asking them of course, just to get you past the extra security.
You are not going to be able to purchase any items until you update with the additional security that iTunes now needs, and the 2nd email is not going to stop you using your usual email that you use to log into your iTunes account.
Maybe you are looking for
-
Collective Invoice - Actual Goods Issue date
Hi Friends, Collective invoice topic has been discussed many times but I didn't find exact solution to solve my issue. From sap help and few other threads it is learnt that Billing type, Billing date, Payer, Billing unit, Terms of payment, Incoterms,
-
Creating something better than Photoshop CC ?
The basic CC concept just doesn't work for many people, including myself. Bottom line: there must be a perpetual license option for a basic photo image editing program. For many photographers, Photoshop Elements just isn't robust enough. My guess i
-
Is there any way to tag one song as being on more than one album? And example is I have the Elvis song "In the Ghetto" in my library twice, once as part of he "Elvis in Memphis" album and again as part of "30", greatest hits collection. It would be n
-
Dear Friends, What is this CAF GP...? Why and How it is used in SAP Netweaver? Regards Santhosh kumar.N
-
TS4006 Can you activate location services on a device that has it turned off?
I can't locate my ipad using the "find my iphone" app because the "location services" is turned off on my device. Am I able to remotely turn on "location services" via the cloud or through the app itself?