Yoga Pro 2 screen shuts off after one minute of inactivity

I have configured the Power options so that the screen shouldn't dim on either battery or power cord and the laptop shouldn't sleep. I don't have a screen saver on. I even removed the "Energy Manager" bundled app hoping that might work. Hugely annoying. Any advice appreciated!
Solved!
Go to Solution.

This may be a Windows 8 issue. I finally fixed this problem by identifying the screen saver as the issue (and I wasn't using a screen saver).  Type "lock the computer" into the search box after clicking the search charm, which brings up the screen saver dialog box. Mine was set to 1 minute, though I'd never set it myself. If you can't change it, choose a screen saver and you should be able to do so (and can then switch back to no screen saver).
BUT, here's the problem. Other things you install (or settings within things you install) can apparently change and override whatever you type in for the delay time. Try applying your new time and exiting from the dialog box, then open it back up again. I was finding that it kept going back to 1 minute. To reset things so that you can get control again, type "user accounts" into the search box and when the dialog box comes up, choose "Reset Security Policies". Then you can go back to the screen saver dialog and successfully change the delay time.
See http://social.technet.microsoft.com/Forums/windows/en-us/ace4085a-b0ba-4a98-898d-cd92d9e88e13/window... for some detail.

Similar Messages

  • 15"Macbook Pro shuts off after 5 minutes when using full-charged battery.

    15"Macbook Pro shuts off after 5 minutes when using full-charged battery.  If not touched, computer stays on.  But start typing, it shuts off.  Was told this was a fan problem.  Had fan replaced last spring.  But problem has begun again.  Is this a battery issue or somethig else?

    Charge Information:
      Charge remaining (mAh):          3747
      Fully charged:          Yes
      Charging:          No
      Full charge capacity (mAh):          3899
      Health Information:
      Cycle count:          90
      Condition:          Good
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          12382
    It says it looks fine....

  • HP 15-f009wm shuts down after one minute

    HP 15-f009wm, shuts down after one minute at idle. If you are doing something on it, like moving the mouse, it will stay on. I tried to go in, and change the power plans, and the options pertaining to this, but no help at all. I even tried to take the password off, so my wife wouldn't have a hard time trying to put it in, everytime it shuts down.  I seen the option, marked it, and it still needs the password to open it.

    If you have a virus and malware infestation, they you will have to certainly address that. This might be a good starting point to attempt to clean your system: Resolving and Preventing Viruses on Your Computer (Windows 8)
    This is one way you can prevent or at least reduce potential infection in the future:
    Using Windows 8 Defender to Prevent Virus and Spyware Problems
    Some virus and malware are very tough to remove. This may be the quickest way to clean your system and start over. If you do this, you may want to take the time to clean any external drives you may have (ie. USB Sticks) as to not potentially infect your system again: Performing an HP System Recovery (Windows 8)
    I hope this helps.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • My iPad does not automatically shut off after several minutes of non use. I can shut it off with the on/off switch. What can I do to get the auto sut off feature back?

    My IPad does not automatically shut off after several minutes of non use as it had been doing a few days ago  How can I restore this auto feature?

    Settings>General>Auto-Lock and select an Auto-Lock time (the "Never" setting will of course never auto-lock the device)

  • I have a Ipod shuffle 4th generation. I would like for the music to shut off after one hour long song automatically rather than go to the next song. Is this possible?

    I have an ipod shuffle 4th generation. I would like for the music to automatically shut off after one hour long song rather than going to next song on the list. Is this possible?

    Sorry, but it's not.  The only way to get this to work is to only put the one hour song on your Shuffle. 
    B-rock

  • My nano shuts down after one minute of use, why?  Brandnew

    My nano shuts down after one minute of use and it doesn't matter if I'm using the radio or playlist.  This is brand new so I've only ever listened to 1 minute of a song. Help

    Kevin,
    This usually happens when your headphones/earbuds aren't plugged all the way in. Double check the connection of the headphones and make sure the jack is free of debris.
    B-rock

  • Two Problems:MSN Won't Download,  Display Shuts Off After 1 Minute

    Hi ok so i have two problems, I had MSN 6.03 for a while but last night it just stopped opening, so I deleted it and tried to redownload, but when i try to download it, it says "failed to mount" every time.
    The second problem is the display shuts off after 1 minute, I went to the energy saver and i changed it to 15 minutes an I locked it, but when i exit out of the energy save it goes back to 1 minute HELP!!!

    Sounds like you have either cache, finder, or disk corruption problems. Follow the steps here:
    http://www.thexlab.com/faqs/repairprocess.html

  • Ideeacentre B520 Display Shuts off after 1 minute

    My b520 display shuts off after 1 minute.  None of the windows setting seem to affect it.  The user Manual for the system does not seem to address this.  What am I missing?
    Solved!
    Go to Solution.

    I found the problem.  it was the lenovo dynamic brightnes system. 

  • Shooting a video works sometimes, but sometimes it shuts off after one second without recording any video

    Have had the Turbo Droid for only 3 days and just tried to shoot video. Twice it worked, but more often it seems to begin recording, but shuts off after one second without recording anything.
    Not sure what I'm doing wrong to cause this to happen.
    Can you help?
    Thanks!

    Thanks, EfrainM_VZW.
    Haven't seen any error messages. Occasionallly, but only rarely, the video will record 1-2 frames, but most of the time it just shuts down. I have tried it with and without the rubber-grip case; taking off the case had no effect. The video still would not function.
    When you tap the video camera icon, it tries to shoot video and seems to begin to record, but one (or two) second(s) later, it beeps and stops. Rarely with a frame or so of video; mostly nothing is recorded.
    The still camera works great! Love being able to touch it anywhere to grab a snap.
    BTW, my partner and I got identical phones at the same time last week. His video has the exact same problems as my phone.
    Another point: I downloaded the Google Camera and can shoot video just fine through that camera. But not through the stock Motorola camera that came with the Droid Turbos.
    I'm starting to think we got phones from a defective batch.
    What do you think?

  • TS3474 Why does my iPod Nano turn off after one minute of use?

    I just got a new 16 GB iPod Nano and it turns off after one minute of use.  Why does it do this?

    I figured it out.  Headphones were not plugged all the way in.  This support community is awesome.  Thanks everyone.

  • Final Cut Pro Randomly Shutting off after Minutes

    Every time I open FCPX and begin editing it randomly shuts off after about 3-4 minutes. Regardless of what I am doing. I get no wheel or anything, it just shuts off clean. I am running the most recent update to Lion, FCPX 10.1 with 8GB of ram... this is really frustrating. Any thoughts?

    #44: FCP acting weird - Trash Prefs
    Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
    If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
    1) Trash your FCP preferences. Download the appropriate version of FCP Rescue at http://www.fcprescue.com and run it.
    http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
    2) Open the Disk Utility and Repair Permissions.
    3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
    4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
    Shane

  • Need help fixing video shut off after 2 minutes in non-windows mode

    Good morning experts in this forum,  I need your help solving a hardware/firmware problem of my computer. I have a Hpe 250f computer with Radeon 5700 series video card on it.  I recently noticed one strange problem which prevents me from doing any meaningful work in non-windows mode: The video will be shut off after around 2 min if the computer is not in Windows mode.  This includes BIOs mode and recovery mode.  There is no problem if the computer logs on Windows within 2 minutes.  But if I stay in BIOs settings or try to use HP diagnostics or try to recover a backup using windows backups for around 2 min, the monitor will turn blank and the power button of monitor will turn yellow from green indicating no video output to it.  It can not wake up by mouse or keyboard. I read that older BIOs have problem with fan speed and I reflashed the BIOs.   But it did not work. This problem drives me mad since I had occasional hard drive failures recently and I could not recover my system (That is why I noticed the problem recently, but the problem could have existed when I bought the computer).  Now the computer is out of warrenty and I could not find any similar case using Google search.  I really appreaciate your help. Thanks

    I had the same problem when I upgraded.  In my case it definitely was the power supply.  In my effort to figure out the problem by swapping components in and out, the dieing power supply killed 2 P8P67 Pro and 2 2500k, and when I tested with the P67A-GD65, the power supply totally died, but the good thing is that the GD65 survived.  Swapped in a 430W to test and everything was perfect.  At full load with GTX260, it will draw less than 300W, so your power supply is fine to test.

  • Shuts Down After One Minute?

    I can turn on the Mac and load it all the way to the desktop, but after a minute or so, a pop-up of "Logout, Cancel, Restart, Shutdown" will occur. Even though nothing is pressing against the keyboard, it will turn itself off after a minute. I know this isn't a hardware problem because I am not experiencing random shutdown in XP, so it's solely within the Mac OS. Suggestions? Thanks!

    Kevin,
    This usually happens when your headphones/earbuds aren't plugged all the way in. Double check the connection of the headphones and make sure the jack is free of debris.
    B-rock

  • MGP is starting off after one minute inspite of MGP_DELAY parameter

    Hello
    We have a strange problem. MGP starts and finishes fine...but it starts again after one minute which is the default value(60 seconds).
    We are using MGP_DELAY parameter in webtogo.ora with a value of 800 seconds..its still starts after one minute only...
    We are starting MGP from the mobile server and not as service..
    We restarted mobile server also..
    Can anybody help us with this strange behavior..
    Am I missing anything..
    Any help is greatly appreciated..
    thanks
    Yugandhar
    [email protected]

    Hi
    thanks for the info...looks like MGP_DELAY parameter works only when MGP is started as an NT service..thats why it didnt work on our case..
    we have modified mgp.bat file to take into account the time delay..
    thanks
    Yugandhar

  • My nano starts playing a selection then turns off after one minute

    My nano starts playing a selection then turns off after one minute

    Problem solved for now.  Cleanded the jack port with a q-tip and pushed the cable in harder.  Seems to be working.  Thanks to all others who posted these past suggestions.

Maybe you are looking for

  • Problem with CO Extension

    Hi, I have extended a CO. When i ran the page through JDEV, the page is opening properly. But when i ran the same thing from apps, i am getting the Nullpointer exception. And it is showing the error is at the line in extended CO: super.processRequest

  • Audigy SE in Vista won't output 44.1Khz digital. Please please h

    Hi?I just bought an Audigy SE to use with my new Vista computer. According to the specs it should be able to ouput digital in either 44. 48 or 96 khz. However with the latest driver, I can only select 6 bit 48khz or 24bit 48khz. Is there any way to f

  • Rolling back lock after RowInconsistentException (in ADF 11g)

    The JDeveloper 11g documentation explains under "Advanced Entity Object Techniques" how to override the select and lock functions so that you can do the locking with a stored procedure. I think I've done this as documented, but when I detect that ano

  • Router to support lots of users

    Our church's router currently is crashing every Sunday morning due to too many simultaneous connections.  I was wanting to upgrade to one or more airport extremes and was just curious what the best way to do this was.  I was thinking of bridging two

  • Total Quantity generated from Process Order

    Dear Experts,     Can you help me on how to find the total quantity generated from process order. Example: I want to see for a particular material what is the total quantity converted in COR6N for a particular period. Thanks