All im client status issues

hello guys,
since yesterday, all my im status are away for somereason, skype,adium,qq etc
it can not be changed to online, any suggestions?
also my facetime does not work on this macbook pro upgraded from snow leopard, it works on my new 2011 macbook air tho.
regards
Steve

i found a solution, by removing air display.
but facetime problem still not fixed on my macbook pro =[

Similar Messages

  • Exchange 2010 all mail clients with internal cached and internal non-cached mode users having connection status issues, login prompt -- external is fine either way

    Hello,
    I'm seeing an issue that started this past Monday with no recent change to our environment. 
    External Outlook Anywhere users and Mobile users, OWA users are unaffected.
    Internal Users are affected when using Outlook of any version, 2010 or 2013.
    -Internal Users normally log into their workstation with their ad credentials, domain joined machines. Outlook opens without credentials prompting ideally.
    1 . Using Cached Mode:
    a. Login Prompts, slowness - Since Monday, users are getting prompted to login. The prompt goes away after logging in at startup. It is also causing high CPU
    on the workstations.
    b. Free/Busy, Out of Office doesn't work. I can, however complete auto-setup for a new user, so autodiscover is not completely down for internal users.
    c. Checking Connection Status shows connecting status on highlighted entry below without ever establishing connection (just goes away).
    The outlook icon in the system tray says "Outlook is requesting data from the server":
    2. Using Non-cached mode 
    a. No Login Prompt at startup, business as usual
    b. Free/Busy, Out of Office works fine. Autodiscover is fine.
    c. Checking Connection Status shows normal except, it has "casarray URL, then status is referral" it seams to flicker this constantly then go away intermittently.
    d. Main issue in non-cached mode is, sometimes a user will log into windows, open outlook and it will not open and says "server is unavailable. Retry, work offline, or cancel" I can try re-opening, same message.
    Only after logging out of windows, logging back in, I can get back into outlook. This is not every time, or consistent with specific users, but random. 
    3. Lync Pop up  for credentials often, though entering the password.
    URLs are correct. Autodiscover, EWS, etc. 
    Already tried bypassing our loadmaster load balancer with host files on clients. same issue regardless of casarray node. 
    Not sure what is going on.
    Josh

    You have a hybrid configuration with Office 365, right?  You didn't provide this valuable piece of information.
    In Exchange Online PowerShell run this command:
    Get-OrganizationConfig | FL PublicFoldersEnabled
    If the value is "Remote" then users with Exchange Online mailboxes are looking to on-premises public folders.  Be sure that you have legacy pubic folder interoperability properly configured.
    http://technet.microsoft.com/en-us/library/dn249373(v=exchg.150).aspx
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Almost all clients status as Inactive

    In one of our secondary server , almost all clients status showing as Inactive. Why its showing as Inactive or how to troubleshoot to check on this 

    Have you already examined if the MP on the secondary site and that replication are still working?
    Torsten Meringer | http://www.mssccmfaq.de

  • Hi, I finally got lucky and past the "other" memory status issues when syncing. Now I'm "waiting for changes to be applied" sync stuck all night (itunes yesomite iPhone 6 plus). is this a bug? I have not had a single successful sync with yesomite.

    hi, I finally got lucky and past the "other" memory status issues when syncing. Now I'm "waiting for changes to be applied" sync stuck all night (itunes yesomite iPhone 6 plus). is this a bug? I have not had a single successful sync with yesomite.
    please help. this issue prevents music from syncing. I have set the sync setting to convert songs to 192kbps AAC to save space, I figure that could slow the sync
    down, but it's hanging indefinitely (I've left it for 24 hours with out it completing.)
    the the only music that appears on the phone are songs purchased from the iTunes Store. 95% of my collection are rips from my CDs.
    thank you for any help!

    Yeah it's pretty sad that $1000 phone they put out you such cheap memory It causes issues, I have iPhone 6+128 GB actually this is the second brand-new one they gave me because they keep affording it trying to act like that's not the issue because they're too stupid to know how to check what memory is in each one before they give it to me when I have told them multiple times my back up runs perfectly fine on two 5s phones and a 6 64GB of course running MLC memory.
    I told them it's because just like the write ups say I have 809 apps but I have not even put all my music on the phone so I'm still running 50 to 60 gigs free and it crashes and reboots itself sometimes in multitasking and more often than it does that in between multitasking I get a black screen for 1 to 2 seconds in between apps and upon start up the Apple logo screen will flicker and do weird things, One of the genius idiots asked me if I could just delete some of my apps, really that's the answer to fix the phone the customer needs to limit the amount to apps they put on their phone, why the **** get a 128 gig if you can't put on anything you want to it guess they need to start selling them saying you can only put a limited number of apps on them, it's really is a **** joke, I have over $20,000 of Apple merchandise easily and always get the new phone every year but I'm starting to reconsider my decisions in the future because this company is starting to go downhill, The reason water not recalling the phones is because they're dealing with their top-of-the-line thousand dollar phones in this case and most people don't have over two or 300 apps so they're not having as many issues, so basically they have messed up phones they just don't know it in their hands and Apple is just too **** greedy to recall the phones, they'd rather sell customer spends that only work half ***.
    Stuff like this will be the downfall of their company, all the people that stay with them because as long as you don't jailbreak their stuff it normally just works without issue will be soon jumping ship if stuff like this keeps up, because I can guarantee they got me thinking now.
    not that I wanted to know or should I be expected to but I even offered for them to open up my brand-new phone and just replace the memory to MLC memory which is something I shouldn't have to do with a brand-new **** phone, they should just make one with the right memory and give me a new phone, actually just don't sell customers that buy the top-of-the-line phone from you trash ones in the first place that would be a great option.
    what burns me up the most is when you talk to AppleCare and Genius Bar they try to act like the issue isn't there and they're unaware of it, they say that Apple hasn't come out with any information about it, yeah that's because they don't want to recall the trash.
    Apple has became nothing better than your run-of-the-mill company, android is becoming just as good as they are sad to say this since I have been an Apple fan for so long but there is no excuse for BS like this they have been looking for options to fix my phone for a month now this is not the way you should treat loyal customers, I would've been better off keeping my 5S and in the future just switching to android.
    it's pretty sad that the company has no idea how to check which memory is in their **** phone and even after I offered to let them just replace the memory in my new phone by opening up my brand-new phone to replace it they have no idea how to do that either, yeah Genius Bar sure, I think that should change the name to idiot bar and Apple don't care instead of Apple care.

  • Multiple (but not all) VPN clients failing in Windows 8 and 8.1

    Big question for VPN gurus, with a long story.  I got a new machine with Windows 8 in late December 2012.  I work remotely
    for a bunch of different customers, so 100% of my work is done via VPNs.  My customers use a wide variety of VPN types.  These were all working fine up through early December 2013.  Suddenly a bunch of them stopped working.  I tried a ton
    of stuff:
    - Uninstalling all VPN clients and reinstalling them one at a time
    - Reinstalling / updating network drivers
    - Turning off and uninstalling antivirus and firewall software
    - Verified problem was on my machine, not local network, both by testing other machines on local network and by testing this machine on other networks
    The following VPN clients would not work:
    Cisco VPN Client
    FortiSSL
    Microsoft built-in
    The following VPN clients had no problems:
    Cisco AnyConnect
    ShrewSoft
    Juniper web-based SSL VPN
    Check Point web-based SSL VPN
    As you can imagine, having to use a second (Windows XP) machine to connect to half my customers was a source of some serious headaches.  After 3 weeks of beating my head against this, I finally upgraded my OS to Windows 8.1.  The hail mary worked;
    my VPN problems went away!
    Two weeks later, the exact same symptoms resurfaced.  I've gone back through a bunch of the steps that didn't help the first time around, with the same results.  I expect a system refresh would probably do the trick, probably temporarily like the
    OS upgrade, but I can't afford to spend a week reinstalling dozens of critical applications only to have the problem resurface after another couple of weeks.
    At this point, the closest thing I have to a clue is that in both cases the problems started soon after installing an update to the Cisco AnyConnect client.  After uninstalling the client, the problems do not go away.
    Exactly what do I mean when I say the VPN clients don't work?  That varies from one client to the next:
    Microsoft built-in: Error 720
    FortiSSL: variable - sometimes won't finish connecting, sometimes connects for about a second
    Cisco: variable - sometimes won't finish connecting, sometimes "connects" but I can't access anything
    Has anybody seen this sort of behavior before?  Any suggestions for fixes I may not have tried yet?  Thanks in advance.

    Hi.
    I have been similar issues with VPN clients. In my case cause of this problems seems to be "Deterministic Network Enhancer". So turning this component on and off usually helps.
    Actually I writed one script to fix this probleem for my clients.
    <#
    .Synopsis
       This script is ment for a fixing of network problems which may occur when you use Windows 8/8.1 with Client Hyper-V
    .DESCRIPTION
       This script will disable and then enable again Deterministic Network Enhancer (dni_dne) component from network connections.
       Parameter RegisterScheduledTask will register this script as a scheduled task which will be triggered at every  time when computer starts.
    .EXAMPLE
       Fix-Network.ps1
    .EXAMPLE
       Fix-Network.ps1 -RegisterScheduledTask
    #>
    param
        [switch]$RegisterScheduledTask
    function Test-IsRunAsAdministrator
       $currentUser = New-Object Security.Principal.WindowsPrincipal( [Security.Principal.WindowsIdentity]::GetCurrent())
       $currentUser.IsInRole( [Security.Principal.WindowsBuiltInRole]::Administrator)
    function Get-RunAsAdministrator
        if(!(Test-IsRunAsAdministrator))
            [string[]]$argumentList = @('-NoProfile' , '-File', $MyInvocation.ScriptName)
            if($RegisterScheduledTask)
                $argumentList += '-RegisterScheduledTask'
            Start-Process PowerShell.exe -Verb Runas -WorkingDirectory $PWD.Path -ArgumentList $argumentList
            break
    Get-RunAsAdministrator
    if($RegisterScheduledTask)
        $actionArgument = '-ExecutionPolicy Bypass -File  "' + $PSCommandPath + '"'
        $action = New-ScheduledTaskAction -Execute "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" -Argument $actionArgument
        $trigger  = New-ScheduledTaskTrigger -AtStartup
        $principal = New-ScheduledTaskPrincipal "SYSTEM" -LogonType ServiceAccount -RunLevel Highest
        Register-ScheduledTask -TaskName Fix-Network -Trigger $trigger -Action $action -description "Fix network for Windows 6.X with Hyper-V" -Principal $principal
    else
        $bindings = Get-NetAdapterBinding | Where-Object { ($_.ComponentID -eq "dni_dne") -and ($_.Enabled)}
        $bindings | Set-NetAdapterBinding -Enabled $false
        $bindings | Set-NetAdapterBinding -Enabled $true
        $date = Get-Date
        "Done:  $date" > $PSScriptRoot\Fix-Network.log
    Hope that this will help.
    Br,
    Heiki

  • Collection Alerting for Endpoint Protection and Client Status

    both for the Client Status alerts and for the Endpoint Protection alerts I have set these up on one collection each,
    the thing is if you go to the Client Status node under monitoring, by default the collection 'All desktop and server clients' is selected, while this one doesn't even have the alert configured
    same goes for endpoint protection, where by default the collection 'All client Systems' is selected ...
    what is the purpose of configuring a specific collection for the alerting, if you have to select this every time you look at the monitoring?
    try to explain that to customers..

    The purpose of configuring alerts for different Collections is that you can have e-mails send to different Groups. When you create subscriptions you can select the different alerts and configure them to mailed to different Groups.
    Kent Agerlund | My blogs: blog.coretech.dk/kea and
    SCUG.dk/ | Twitter:
    @Agerlund | Linkedin: Kent Agerlund |
    Mastering ConfigMgr 2012 The Fundamentals

  • No client status update in dashboard

    Hi,
    I have the problem that the WSE 2012 (NOT R2) dashboard always shows all my clients as "offline". I re-installed the connector software on all connected clients without success (full process: leave Domain, deinstall connector software, delete computer
    via Dashboard, reboot all, re-install connector).
    This behaviour seems to be present after update rollup #3 for wse 2012 end of last year.
    Maybe, it depends on upgrading the clients to Windows 8.1. Unfortunately, I can't tell exactly.
    Everything else is running fine. But, as I use Lights-Out, I have the Problem that the connected clients do not keep the server alive.
    Any hints ?
    Greetings
    Chris

    Most likely is either a connector version mis-match, or a firewall issue.
    Have you changed with the firewall settings at all?
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • EHP4 - Task Statuses issue

    Dear Experts,
    We have a situation after the EHP4 upgrade,
    we were able to configure Restatement & status reporting.
    But when we imported the Transport requests in another environments,
    We have issue with the task statuses.
    Like all the statues of the tasks in consolidation monitor changed to Initial stage.
    please help us understanding this. Is it expected or is it an issue.
    Do we have any remedy. can we get back the earlier statuses.
    We have a Go live on this upgrade. plz help us in this situation.
    Thanks
    Kamal
    Edited by: kamal kishore on Nov 12, 2009 2:39 PM

    Hi,
    After the upgrade we checked the status monitor & we found all the historical status of tasks were made to initialised status.
    As per SAP while regenerating the data basis system created new table for status rather than the old table (not sure why)
    Hence all the old period task status were made to initialised status.
    SAP made a fix in the system & we could solve the issue.
    Thanks
    Kamal

  • SCCM client status show NO

    Hi All,
    i have deleted obsolete machine from SMS collection
    ‎‎after that i reinstalled the SMS client and readded the same machine
    ‎‎still that machine is showing client status is NO
    Please help me what to do

    Please try this. It worked for me.
    Rebuild the repository and WMI services on client
    Stop the WMI services and rename the existing repository as
    'repositoryold' and restart the services. Initiate all actions once rebuilding respository is completed.
    OR
    Reset the GUID on client system using Client Action
    Tool (CAT)
    Add all the client hostnames in CAT
    Go to > Client Agent Action
    Run > Generate New SCCM GUID.
    Wait for actions and initiate all the actions twice. Update the collection members
    few time in console then check the client status. It Works!

  • WAP 321 disconnecting all associated clients

    Hi Support,
    I am a newbie technical support. Currently, I encountered a issue about WAP321 that will occasionally disconnecting all the clients(about 7 clients only) in one shot and cannot connect back at all. However, after login to the Web Gui and reboot the WAP321. It is able to connect again.
    I had upgrade the firmware to 1.0.4.2 but the problem still exists. The AP is using only WPA2-Personal.
    The environment of the AP is like this:
    Internet->Watchguard Firewall (with AP too but different SSID with the WAP321, flat vlan) ->switches and WAP321
    Is that any misconfiguration of the AP or the network environment cause this issue?
    Another problem is the time of the AP cannot be fixed. I had tried either set the time using NTP (port 123 is opened in firewall) or manually input but it will revert back to 1999 after reboot.
    Thanks in advanced!

    Hi Support,
    I am a newbie technical support. Currently, I encountered a issue about WAP321 that will occasionally disconnecting all the clients(about 7 clients only) in one shot and cannot connect back at all. However, after login to the Web Gui and reboot the WAP321. It is able to connect again.
    I had upgrade the firmware to 1.0.4.2 but the problem still exists. The AP is using only WPA2-Personal.
    The environment of the AP is like this:
    Internet->Watchguard Firewall (with AP too but different SSID with the WAP321, flat vlan) ->switches and WAP321
    Is that any misconfiguration of the AP or the network environment cause this issue?
    Another problem is the time of the AP cannot be fixed. I had tried either set the time using NTP (port 123 is opened in firewall) or manually input but it will revert back to 1999 after reboot.
    Thanks in advanced!

  • Exchange 2010 SP3 Rollup 8v2 causes client connectivity issues

    I installed SP3 Rollup 8v2 this weekend, going from 7. Since then we are having random client connectivity issues. New profiles can't be created, and some users can't access resources when booking meetings. We can do a registry fix to their machines to add
    a DS Server, but this is a workaround only. I have uninstalled the Rollup 8v2 and we are still having the issue.
    I thought 8v2 was supposed to fix this issue!

    Hi,
    According to your post, I understand that outlook client cannot connect to Exchange server to configure profile and cannot get list of resources room when upgrade to Exchange 2010 SP3 Rollup 8v2, the temporary solution is that specify the DC in registry.
    If I misunderstand your concern, please do not hesitate to let me know.
    Is there error message when configure Outlook failed?
    Please run Test E-mail AutoConfiguration and Outlook connection status to double confirm the URL and FQDN of Exchange server.
    As additional, please run below command to double check the state of Exchange system component:
    Get-ServerComponentstate -Identity “servername”
    If the state is Inactive, please run below command to active relevant component:
    Set-ServerComponentState <Identity> -Component “component name” -Requester HealthAPI -State Active
    More details about Server Component States in Exchange, for your reference:
    http://blogs.technet.com/b/exchange/archive/2013/09/26/server-component-states-in-exchange-2013.aspx
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Allen Wang
    TechNet Community Support

  • Status issues across multiple devices

    Hi. I seem to be having the opposite problem to most people reporting status issues. I have friends telling me I'm always away or offline in the evenings, even tho I have 5 devices I can use Skype on. My main 3 clients are my win7 work PC (which I quiet often leave on over night), my xbox one which is on most evenings, and my iPhone. I also have an iPad and win8 laptop But I only occasionally use these for Skype.
    Do I have to sign in to the Skype app every time I switch on my xbox one to get it to show me as online? Is there something else I need to do? Do you think it's because I have too many clients?

    When I try to go to iTunes music match on her phone it asks me to sign into match, which I am assuming is the same as her Apple ID name and password.  This is a different name and password than my account.  So, it seems that she cannot access my "cloud" from her phone in order to download music that I have purchased.  I guess since she has her own iClud account, she needs to sign up for iTunes match through that account and pay the fee.  I was hoping we could access the same 'Cloud" to have the same library of music? Hope that made sense.
    Thanks for the help.

  • All the client switches becoming STP ROOT switches

    Hi All,
    Here is my topology. I've two vlans (50,60). I was doing some lab so just build this topology and when i check the the spaning tree configuration on all the switches except the two transparent switches. All the client switches have become ROOT switches for VLAN50,60.
    I've give the below commands on the VTP-Server, but still the problem is not clearing.
    VTP-SERVER(config)#spanning-tree vlan 1 root primary
    VTP-SERVER(config)#spanning-tree vlan 50 root primary
    VTP-SERVER(config)#spanning-tree vlan 60 root primary
    "show spanning-tree" outputs:
    Output from VTP-Server:
    Output from Client1:
    Output from Client2:
    Output from Client3:
    Can someone please correct the issue?
    Thanks in advance.
    Regards,
    Chandu

    Perfect - Rolf. Issue resolved.
    I understood it. Since both the transparent switches are not having vlan50,60 they are not participating in the STP calculation for those two vlans.
    Since those two switches are not participating in the STP calculation. For every switch it seems like it is the only switch in the topology, so STP made them ROOT switches, got it...
    Really playing with devices like anything.... but however learning like this is very good...
    Thanks a lot for your help again.
    Regards,
    Chandu

  • Client Communication Issues when attempting to retire old ADCS Certificate Authority

    Hi,
    SCCM 2012 R2 running on 2008R2. Single site.
    We've been migrating our environment to a new SHA2 Microsoft CA and we're seeing issues when attempting to retire our old SHA1 CA server.
    We've had a fully functioning PKI integrated SCCM environment for some time. No issues. All our clients have client certificates deployed via group policy.
    We've spun up a new CA and installed new SHA2 distribution point and webserver certificates on the SCCM server.
    We have added the new Root CA certificate to the trusted list in the site properties (both are now listed)
    We have confirmed that new machine builds are receiving SHA2 client computer certificates via group policy.
    Everything runs happily with the two CA servers configured and running. We would like to retire the old CA server but when we shut it down we find that all older clients (with the SHA1 cert) stop communicating with the management point.
    Clients with the newer SHA2 computer certs continue to function. We assumed that the old CA server didn't have to be running for the SHA1 certs to still function. Are we incorrect?
    Anyone able to explain what's happening?
    Cheers!

    Hi Jason,
    No, we don't have CRL checking enabled in the SCCM site settings. As I understand it that tells the clients to check the site server against the CRL?
    We think the issue is due to IIS attempting to check the client certificates against the CRL on the old CA (which is currently turned off)
    For now we've temporarily disabled CRL checking in IIS while we attempt to migrate the old CRL to the new CA. All our clients are now talking happily to the management point.
    All good. Cheers.

  • On the main window, what is the column to the left of client status icon?

    on the main window (ARD version 3), what is the narrow column immediately to the left of the column with client status icon? (The columns to the right of the client status icon are Name, IP address, DNS name, ARD version, and so on)? I can't find this mentioned anywhere in the Remote Desktop manual.
    That column is blank next to all the computers except one, which has a blue (aqua) circle.
    PowerMacG5dual1.8GHz   Mac OS X (10.4.8)  

    I have now managed to reproduce the blue (aqua-looking) ball. Just as I had at work, I installed ARD v. 3. on a machine on my home LAN, once again setting it up as the administrator machine. To install the client on another machine in the LAN, I then chose the "Upgrade Client Software" option. I entered the username and password of an admin user on that machine, hit "Upgrade" and the installation appeared to go successfully. Upon returning to the Scanner (main) window on my administrator machine, I noticed the blue ball in that first column next to the name of the machine with the newly updated client software.
    Was there anything in common between the one machine at work with a blue ball in that column and the one machine at home with the blue ball? The only thing I can think of is that on neither of those 2 machines had I ever manually installed ARD 2.2 client previously. Does that make any sense?

Maybe you are looking for