Assessable Value/ Excise Base

Hi Experts,
My client buys material from a importer who includes all excise and Addtional duties in PO Price.
Ex:
Unit Price: INR 80
BED: INR 8
Ecess: INR 3
HS Ecess:INR 2
Additional duties: INR 7
PO Price: INR100
and CST : INR 2 (2% on PO price)
Now what should be the assessable vale or excise base
Is it Unit price or PO price?
Pls advice
Thanks in advance
Reg
NDS

Hi Naveen,
Assessable value is nothing but a value of the material. It will be calculated in 2 types
Section 4A :
Assessable value = Max.retail price - abatement %
here abatement % will be provided by the gorvenment.
Section 04 :
Assessable value = state invoice price (SIP) - ED - Ecess - HS cess
SIP = all india price (AIP) - taxes
AIP = (qty x value) - retail margin % - rs% - tax for rs%
This is how assessable value will be calculated.
Regards,
Prasath

Similar Messages

Copa assessment value as base for allocation of other costs

Hello,
We have a scenario wherein certain costs like travel, communication should get allocated in copa based on Employee Cost...
This employee cost is getting transferred to copa through assessment in two stages namely as Direct employee cost and Indirect Employee cost...
Now the requirement is based on Employee cost (i.e. Direct employee + Indirect employee cost) above said expenses like travel and communication should get allocated to say respective profit center.. please refer the attached working...
Is it possible to do allocation like this wherein based on one assessment cost value, which is taken as base for allocation of other costs...
Hope am making my requirement clear..
Thanks
karthik

Hi,
So you mean that you have 1 value field for direct expenses and 1 value field for indirect expenses?
If this is the case there is not way (automated) I can think about for you to do an allocation based on costs that are already diluated in thes two value fields. Manual calculation and update of SKF could be an option.
But you could think of rethinking the way you allocate your costs. For example cycle 3 might come earlier in the process and allocate travel, communication into cost centers where you post the employee expenses. then you can allocate employee cost centers to COPA as direct/indirect.
regards
Ali

Excise Invoice Selection Vs assessable value in Subcontracting Challan

Hi,
I have maintained the Assessable Value for my subcontracting components and also there is Excise Invoice exists for this components. While creating Subcontracting challan, system is displaying information message that Material XXXXXX has an assessable value, but I would like to refer the Excise Invoice.
Hence, when I click the Excise Invoice selection, there is no effect. As per SAP message "The message is for information purpose only. Go ahead with the option selected" system should ignore this message and allow me to select Excise Invoices but it is not happening.
Is this bug or any other config setting to be done to overcome this issue?.
Your replies to resolve this issue is highly appreciated.
Thanks,
Babu.

Hi,
For every excisable material (whether you procure, manufacture or sale) has to be declared as excisable material in table J1ID with appropriate chapter ID, assessable value & CENVAT declaration.
When you send the excisable material to the sub-contractor the material needs to be returned back to your plant within 180 days. If this is not done, then you will have to pay back the excise duty on the material with base value as assessable value. Hence it is required to maintain the assessable value.
Hope this clears your query.
Regards,
Prashant

Excise Duty on Assessable Value in PO

Dear Friends,
The scenario is that weu2019re purchasing material from an outside vendor & therefore creating a PO for that. Now in this scenario the Purchasing Value is different (say e.g Rs 10,000), but excise duties have to be calculated on the Assessable Value (say e.g Rs 8,000). In the std. process, to calculate excise duty we create Tax Code & enter that Tax Code in PO-> Invoice tab in the line item. The system then calculates the Excise duty on the basis of Net Price (field: NETPR) mentioned in the header i.e. the Purchasing Value (Rs. 10,000). While capturing in J1IEX, we mention the assessable value & there the system calculates the excise duty on assessable Value. But our issue is that we want that in PO itself Excise duty shd be calculated on the Assessable Value (i.e. Rs. 8,000) & not on Purchasing Value, so that we can give correct PO to the vendor. At the same time the Purchasing Value (Rs. 10,000) shd also remain in the PO, becoz GR/IR needs to be valued on Purchasing Value ONLY. Weu2019re using CIN. Pls advice.
Thanks
Edited by: Siddhant Hant on Jun 17, 2010 9:53 AM

Hi,
Which pricing procedure you are using ?
If you are using TAXINN then you can adjust in FV11 say in your case calculation as under.
Assessable      10     2     1
10000      1000     20     10
      12.5     2     1
8000      1000     20     10
Here to arrive the exact value of excise cahne the excise duties as showun like total value of excise is 1000 in order to arrive that 10000 on 8000 change excise duties to 12.5% then it will be equal to 1000. Hope this clears you.
Regards

In correct Excise Base Value in Import PO

Dear Experts ,
I have an query on the Excise Base value in Import PO .
The problem is I have made a Import Po , paid the customs duty through MIRO & now when I am doing J1IEX_C wrt to commercial invoice , its showing the Excise base value which is less then the value it should be , the tax amt like Excise BED, AED, Se cess & E cess is getting calculated correctly.
Can somebody tell me where the problem is.
Regards,
DGN 21
Edited by: dgn21 on Dec 3, 2010 6:24 AM

>
dgn21 wrote:
> Dear Jeyakanthan,
>
> As explained earlier after paying to the customs through MIRO, I am doing J1IEX_C, in this transaction, the excise duty is being calculated correctly but the Assessable shown is incorrect.
> I have following condition in schema:
> Gross Price (A):
> Insurance %(B)
> Basic Landing Charges (C):
> Assessable value: (A)(B)(C)
> Basic customs Duty (D)
> CVD (E)
> Ecess on CVD (F):
> S E Cess on CVD (G):
> And then other conditions
>
> Presently the system is calculating the Assessable value as (A) + (D) {i.e. Gross price +Basic Customs duty}, but it should be (A) + (B) +(C).
> Kindly tell me where I need to do the changes so I can get the correct Assessable value as desired.
>
>
> Thanks in advance
Check import pricing procedure calculations in M/08 ?

Update Excise base value in MRP based and Non-MRP based billing

Hi Gurus,
We need to update Excise Base Value for Statistical Condition type. How to configure the same ?
Sl.No Pricing Condition Type      Active   Statistical           Passed to Accounting
1        MRP Price (Statistical)
2        Abatement (Statistical)
3       Surcharge (Active&Passed to Accounting)
4      Assessabel value (Statistical)
(No:4 This is the base for calculating Excise duties i.e Excise Base Value)
5       List Price (Statistical)
6       Customer Discount(Statistical)
7      Surcharge(Active&Passed to Accounting)
8      Net Price (Active&Passed to Accounting)
9      BED   (Active&Passed to Accounting)
10    ECess (Active&Passed to Accounting)
11   SECess (Active&Passed to Accounting)
12   Total collected from Customer(Statistical)
Issue: When there is MRP Price higher than the List Price, then the Cutomer will be charged on the basis of Net Price only, but the duties amount to be paid to the government on MRP Price. so in this case I can not calculate Excise Duties on the Actual Net Price condition which is active and passed on to accounting. And always the Excise duties to be calculated on Assessable value(no:4). But that condition type if I make activate then it will pass to accounting and also getting added to the Net Value(KOMP-NETWR). How to come out of this situation.(as per the customer requirement both MRP based materials and non-MRP based materials are also considered in the same sale order i.e with the same pricing procedure).
Becasue of this EXBAS is not getting updated in the J_1IEXCDTL.
Gurus, Share your valuable experiences and suggestions.
Thanks &Regards
Sreekanth
09611147585

Dear Lakshmipathi,
As per your suggestion, I have maintained Material Assessable Value and then also the duty values are calculating on the basis of Assessable value maintained in the Pricing Procedure. It is not taking the Material Assessable Value into consideration. And it is not getting updated the Excise Base Value.
In which case Material Assessable value will be taken into consideration?
How to update the Excise Base Value in J_1IEXCDTL tables?
Thanks&Regards
Sreekanth

Excise base value for CVD Calculation in Import depot pricing?

Hi,
In case of Import procedure the condition base value which is copying to excise should be sum of assessable value + Basic customs but it is not happening..
kindly suggest me on the same..
regards,

Hi
for custome invoice valu will be
1) IN CVD
2) ECESS on CVD (%)
3) SHECESS on CVD (%)
4) additinal
5) IN Basic customs
6)Custom's Edu Cess
7)Sec ECESS ON Customs
out of these
1 t0 4 will be in excise invoice
1)chek in po tax code 0
2)chek following setting in spro-
Logistic general-tax on goods movement-account determination-specifiy exciseaccounts per trasnction and psecify excise gruopper transction chek IP here for you Grop setting
3) chek condiiton type with accuralse and account key is there or not
GRPO IP CR CLEAR
GRPO IP DR MSUSP
GRPO IP DR ONHOLD
GRPO IP DR PLAAED
GRPO IP DR PLAAT1
GRPO IP DR PLABED
GRPO IP DR PLACESS
GRPO IP DR PLAECS
GRPO IP DR RG23AED
GRPO IP DR RG23AT1
GRPO IP DR RG23BED
GRPO IP DR RG23ECS
GRPO IP DR RG23SED
EWPO IP CR CLEAR
EWPO IP DR PLAECS
EWPO IP DR RG23AED
EWPO IP DR RG23AT1
EWPO IP DR RG23BED
EWPO IP DR RG23ECS
EWPO IP DR RG23SED
Regards
Kailas ugale

Excise duty calculation on Assessable value in PO

Dear Team,
We are facing critical issue in Excise Duty calculation, Excise is calculating on basic price for our normal procurement and we are selling the same at MRP cost... Now the issue is Excise Duty has to be calculated on Assessable value (65% on MRP value) instead of basic price in PO.
Example:
Basic Price - 100
MRP - 300
Assessable value - 195
Excise Duty - 24.10 (195*12.36%)
Regards,
Sai

Hi Sai,
Sorry for the late reply. I think you are close to the solution. You should not change the Procedure too much.
MRP and Abatement condition types should be kept independent of calculations in the procedure. It is only for changing the base price already got for BED(JMOP) making use of the routine. If that is the case you will get base price (BASB) added to Excise duties which are modified for calculation of VAT.
For Eg:
10 BASB
30 ZMRP(Independent condition type used to store MRP value)
40 ZABA(Independent condition typeused to store Abatement %)
70 JMOP From 10(Routine XXX which will change the base value for calculating JMOP with a formula MRP*Abatement %)
270 ZVAT(As usual will calculate from BASB+Excise duties)
Hope this is the way you have done this. Steps 30, and 40 should not come in any "From -to"steps.
This is working well with one of our clients.
Regards
Binoy

Automatic Excise invoice with Assessable value

Dear Experts,
Please help me on this issue,
I want to create excise invoice automatically for a billing, excise invoice is sucessfully created but the value for calculating BED is taken form base price. I want the BED to be calcualted from assessable value after deducting some expenses.
Regards,
mohdsams

Dear Smit,
Thanks for your reply, I had assigned the routine 351 in pricing procedure. When an excise invoice is created at background the value is not from assesable value still it is taking the base price value.
If I create excise invoice manually, the amount is coming from assessable value but it is again taking the base price value once it is saved.
Could you please advise.
Regards,
mohdsams

In import process,how excise base value is calculated in MIGO

Hi expert's,
In import process,how excise base value is calculated in MIGO,with what referance values get add to base value.
waiting for your valuable response,
Regards
V.raj

hi,
we Tried with your following reply ! but still not finding exact value in base value .
(MATERIAL PRICE* QTY IN MIGO * EXCHANGE RATE)
thanks & regards
V.Raj

In MIGO wrong excise base value in import po

Hi,
We have done import PO applied the excise tax code EI, then we try to create MIGO except miro, but in MIGO in we changed the qty for example in PO 100qty and price 100 so total amount is 10000 so we get excise base value is 1000, but now we change the qty in mIGO as 10qty we get same excise base value as 1000 its not calculted.
please suggest me the any config
Thanks
Shital

Hi,
i have test in SAP note u suggested
Excise base defaulted incorrectly at the time of excise invoice capture in the imports scenario with ADC (additional duty of customs) being applicable. The excise duty values are picked from the commercial invoice captured but the excise base value is being calculated incorrectly.
but my scenario is different
Thanks
Shital

Excise Base value calculated wrongly in GR

Dear experts,
When preparing Bought out goods receipt in migo,excise base value is coming wrongly(not as per PO) in sometimes.
If we come back from the screen without saving & then try again. That time the base value is calculating correctly.
This kind of situation is arising inconsistantly. Not regularly.
Please suggest to overcome this issue.
Regards
M.Sarathi

Hi,
When we capture excise invoice in MIGO, SAP will default the excise base value for the total PO quantity.
For eg. if the total PO qty is 100, and if the price is 10 INR, then during MIGO, system will show 100*10 = 1000 INR.
Even if you have posted a partial GR of say 10 nos. already, and you are now trying to post the balance 90 nos in MIGO,
then also, system will suggest the base value as 1000 INR (instead of 900 INR). This is a bug in the excise tab.
Only option is to overwrite the base value manually as per the GR qty.
Regards
Prabhu

Schudling agreement with time dependent excise base value taking wrongly.

Sub: in migo excise base amount is not changing as per the scheduling agreement type LP ( time dependent ).
I have created the scheduling agreement type LP with time dependent.
I have maintained the price value in two validated period i.e
01/07/08 to 31/07/08 price is 100 rs.
01/08/08 to 31/08/08 price is 200 rs.
I have maintained the delivery schedule on
15/07/08 of quantity 1 nos.
When I am doing the goods receipts for the scheduling agreement on
Document date I am giving 15/07/08.
Posting date I am giving 15/07/08.
I am giving the posting date in the excise also 15/07/08.
After item ok.
When I will the excise base value it is taking 200 and also excise duty is also calculating on 200.
When I will post the document
The stock account and GR/IR account is taking 100 only
And excise duty is posting for rs: 200 only
Why the excise base value is not changing as per the validity period.
What setting I have to do the change the excise base value as per the validity date maintained in the time dependent .
regards
jrp

Hi
I was wondering in J1ID there is validity from date only no to date, Pls tell where you have maintained excise base amount based on from to period.
In J1ID if you maintain any new accesable value for the later date it will consider that.
Rgds
Srini

Excise base value not updated

Dear all,
We have found that excise base value is not updated after creating excise invoices,later we corrected it,
excise base value started updating in table J_1IEXCDTL,
Intially for 2 months excise base value is not updated in table,
Is there any problem will arise in future ?
or
How to solve this issue ?
Jeyakanthan

Awaiting valuable replies.....
Edited by: Jeyakanthan A on Mar 6, 2010 5:36 PM

Excise Base value is missing in ARE1

Hi All,
I am doing Export sale through u201CExports under claim of rebateu201D process, my customer currency is in USD (in CMR), and I have maintained condition record for price in USD, also I have maintained Exchange Rate in OB08.
In ARE1 I could not found u201CExcise baseu201D value (blank), if I maintain the condition record in INR, I could found Excise base value, what could be the reason?
Please suggest me that, how to bring the u201CExcise Baseu201D value in ARE1 if condition record for PR00 is in USD (CMR also maintained with USD)
Regards,
Ram

Hi,
Thank you for ur reply,
I have checked in Table (Excise Invoice Item) J_1IEXCDTL , I could not found "Excise Base" value (no value), but, as I have already mentioned that, if I maintain the condition record for PR00 in INR, then it's updating Excise Base. Is there any solution for this? (if condition record in USD)
For Excise Duties we are doing the round off, this is also affecting while converting the values with Exchange rate i.e.USD to INR. (Differance in values) how to avoide this?
Regards,
Ram

Assessable Value/ Excise Base

Similar Messages

Maybe you are looking for