Batch compile for FPGA?

Dear all,
I have an FPGA VI with many subVIs in my project. I would like to compile the entire project at once, but I can't seem to find a way to do this. So right now I have to pull up 30+ subVIs individually and compile them at the rate of about one every 20 minutes, which is really inconvenient.
Is there any way to do a batch compile of my project?
Thanks,
Dave Kielpinski

Thanks for your suggestions.
Matt, I have tried "Mass Compile" and it is nothing to do with the FPGA. It just opens all your VIs, resaves them, and relinks them to their subVIs. This helps with some cross-linking issues.
Bruce, the behavior you describe is what I would have expected initially. However, it seems like I do have to recompile all the subVIs. Right now I don't see anything changing on the FPGA side if I recompile my FPGA shell VI, but not my subVIs.
It makes some sense that compiling the FPGA shell VI would not automatically recompile all the subVIs - the full compile including all subVIs takes about three hours, as compared to less than an hour to recompile the shell VI alone. So there is a strong reason to want subVI compiles to be independent of the shell compile.
Thanks,
Dave

Similar Messages

Shell script for batch compilation of forms 10g on AIX 5.3L AS

Hi All,
Can anybody provide me the Shell script for batch compilation of forms 10g and reports 10g on AIX 5.3L AS?
Regards,
SAM

Hi Alex,
I tried with the below script as well as the one you had posted.
ORACLE_HOME=/opt/oracle/OraHome_3
export ORACLE_HOME
TNS_ADMIN=$ORACLE_HOME/network/admin
export TNS_ADMIN
LIBPATH=$ORACLE_HOME/lib32:$ORACLE_HOME/jdk/jre/bin:$ORACLE_HOME/jdk/jre/bin/cla
ssic:$LIBPATH
export LIBPATH
cd ../forms
for i in `ls *.pll`
do
echo Compiling Library $i ....
$ORACLE_HOME/bin/frmcmp module=$i userid=mydbuser/mydbuser@mydb
batch=yes module_type=library
compile_all=yes window_state=minimize
done
export ORACLE_HOME=/opt/oracle/OraHome_3
export ORACLE_TERM=vt220
export LD_LIBRARY_PATH=/opt/oracle/OraHome_3/lib:/opt/oracle/OraHome_3/jdk/jre/l
ib:/opt/oracle/OraHome_3/jdk/jre/lib/i386:
cd ../forms
for i in `ls *.pll`
do
echo "Compiling Library $i ...."
/opt/oracle/OraHome_3/bin/frmcmp module_type=form userid=mydbuser/mydbuser@mydb
module=$i batch=yes compile_all=no
window_state=minimize upgrade=no
done
echo "PLL Compilation done"
But there was a same kind of error thst turning up all the time.
Compiling Library Agf.pll ....
Forms 10.1 (Form Compiler) Version 10.1.2.0.2 (Production)
Forms 10.1 (Form Compiler): Release - Production
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
PL/SQL Version 10.1.0.4.2 (Production)
Oracle Procedure Builder V10.1.2.0.2 - Production
Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.4.0 Production
FRM-10043: Cannot open file.
Form not created
I hence updated the permissions on the pll as below
-rwxrwxrwx 1 oracle oinstall 335872 May 19 16:31 Agf.pll
But the problem is still persisting.
My environment details are as below.
I am working on Win XP machine. Connected to my AS via telnet and xmanager. I have set my DISPLAY to my local IP.
Is there any thing more that I need to do? If so then let me know.
Regards,
SAM

How to batch compile Oracle Reports ?(just like the code for compiling forms)

The following is for Batch compiling forms..
IF %1=="" GOTO END
DEL *.FMX
FOR %%F IN (*.FMB) DO START /W Ifcmp60 USERID=%1 BATCH=Y MODULE=%
%F
:END
Any idea for compiling all reports using a technique just like
this..

User dbms_ldap package in the database to use PL SQL to create your database
account and then an OID account with a RAD to match the database login. If you
You may have to load the DBMS_Ldap package from the database ADMIN directory first to be available in the database.
LDAP SQL Ex.
user_username := LOWER(new_user) || '@domain.com'; -
retval := dbms_ldap.search_s(my_session, ldap_base,
dbms_ldap.scope_subtree, 'uid=' || user_username, my_attrs, 0,
my_message);
retval := dbms_ldap.count_entries(my_session, my_message);
my_entry := dbms_ldap.first_entry(my_session,my_message);
my_dn := dbms_ldap.get_dn(my_session,my_entry);
dbpassword := 'PASSWD01';
isvalidrad := forms_rad.newraddefinition(radname,new_user,dbpassword,
dbtnsnames,errormessage);
sessionestablished := forms_rad.createoidsession(ldap_user, ldap_passwd,
ldap_host, ldap_port, ldap_base);
radcreated := forms_rad.createradforcn(my_dn, 'false', errormessage);
-- Create new user's database account same as RAD account.
v_sql := 'CREATE USER "' || new_user || '" IDENTIFIED BY ' || dbpassword ||
' DEFAULT TABLESPACE JLIM TEMPORARY TABLESPACE TEMP';
EXECUTE IMMEDIATE v_sql;
v_sql := 'GRANT CONNECT TO ' || new_user;
EXECUTE IMMEDIATE v_sql;

Unable to find framedyn.dll when compiling VI for fpga

When trying to compile an FPGA on cRIO, a window with the following message popped up: unable to find framedyn.dll. How can I resolve this and compile the VI?

I just had this problem and NI Help was able to solve the issue. It is actually a windoze enviroment variable problem.
See http://support.microsoft.com/kb/319114
regards
MDDAve
CLA
Visualize the Solution
CLA
LabVIEW, LabVIEW FPGA

RH9 Batch Compile Failures

I have a batch file set up to batch compile numerous projects one after the other for RoboHelp 9. The output is CHM format. When doing the compile, usually at least one project fails to completely compile and the log file shows only this information:
Adobe (R) RoboHelp Project Command Line Compiler version 9.0.0.228
Copyright (C) 2006-2007, Adobe Systems Incorporated and its licensors. All rights reserved.
Project: C:\TechComm\SPIRIT\source\projects\directd\directd.xpj
Layout: ssl_directd_hdi.
Output: C:\TechComm\SPIRIT\output\help\directdhdi.chm.
Scanning project for compilation....
Scanning finished.
Warning: No baggage file description.
There are no files attached to the project. The baggage file contains some CHMs that were used for remote links, but they are not included in the project.
Additionally, if I recompile this project using the batch file, it will build fine. How can I stop these initial failures? It's not just this project, but others will randomly not generate and the log file shows the same information.

Thanks for your suggestions.
Matt, I have tried "Mass Compile" and it is nothing to do with the FPGA. It just opens all your VIs, resaves them, and relinks them to their subVIs. This helps with some cross-linking issues.
Bruce, the behavior you describe is what I would have expected initially. However, it seems like I do have to recompile all the subVIs. Right now I don't see anything changing on the FPGA side if I recompile my FPGA shell VI, but not my subVIs.
It makes some sense that compiling the FPGA shell VI would not automatically recompile all the subVIs - the full compile including all subVIs takes about three hours, as compared to less than an hour to recompile the shell VI alone. So there is a strong reason to want subVI compiles to be independent of the shell compile.
Thanks,
Dave

Batch Compilation Problem(Migration)

Hiiiiiiiiiii Gurus..
I am on Migration Project...... and for batch compilation of Reports do any one give me the Script.. Because whatever I have is not working.
I have no errors but also I can't get the error file,log file,output file.
(Migration is from 5 to 10g)
Can any one help me.........
Regards Madhav

Here is what I use on windows (file is called genforms.bat):
echo "Generating PLSQL libraries"
echo "Generating abc10.pll"
ifcmp90.exe module=abc10.pll userid=hr/hr@db module_type=library logon=y batch=n build=y compile_all=y
echo "Generating abc20.pll"
ifcmp90.exe module=abc20.pll userid=hr/hr@db module_type=library logon=y batch=n build=y compile_all=y
echo "Generating abc30.pll"
ifcmp90.exe module=abc30.pll userid=hr/hr@db module_type=library logon=y batch=n build=y compile_all=y
echo "Generating menus"
echo "Generating abc10.mmb"
ifcmp90.exe module=abc10.mmb userid=hr/hr@db module_type=menu logon=y batch=n build=y compile_all=y
echo "Generating abc20.mmb"
ifcmp90.exe module=abc20.mmb userid=hr/hr@db module_type=menu logon=y batch=n build=y compile_all=y
echo "Generating abc30.mmb"
ifcmp90.exe module=abc30.mmb userid=hr/hr@db module_type=menu logon=y batch=n build=y compile_all=y
echo "Generating forms"
echo "Generating abc101.fmb"
ifcmp90.exe module=abc101.fmb userid=hr/hr@db module_type=form logon=y batch=n build=y compile_all=y
echo "Generating abc102.fmb"
ifcmp90.exe module=abc102.fmb userid=hr/hr@db module_type=form logon=y batch=n build=y compile_all=y
echo "Generating abc103.fmb"
ifcmp90.exe module=abc103.fmb userid=hr/hr@db module_type=form logon=y batch=n build=y compile_all=yUsage is:
C:\dev><b>genforms.bat > genforms.log</b>For unix you will have to use (file is called genforms.sh):
echo "Generating PLSQL libraries"
echo "Generating abc10.pll"
ifcmp90 module=abc10.pll userid=hr/hr@db module_type=library logon=y batch=n build=y compile_all=y
echo "Generating abc20.pll"
ifcmp90 module=abc20.pll userid=hr/hr@db module_type=library logon=y batch=n build=y compile_all=y
echo "Generating abc30.pll"
ifcmp90 module=abc30.pll userid=hr/hr@db module_type=library logon=y batch=n build=y compile_all=y
echo "Generating menus"
echo "Generating abc10.mmb"
ifcmp90 module=abc10.mmb userid=hr/hr@db module_type=menu logon=y batch=n build=y compile_all=y
echo "Generating abc20.mmb"
ifcmp90 module=abc20.mmb userid=hr/hr@db module_type=menu logon=y batch=n build=y compile_all=y
echo "Generating abc30.mmb"
ifcmp90 module=abc30.mmb userid=hr/hr@db module_type=menu logon=y batch=n build=y compile_all=y
echo "Generating forms"
echo "Generating abc101.fmb"
ifcmp90 module=abc101.fmb userid=hr/hr@db module_type=form logon=y batch=n build=y compile_all=y
echo "Generating abc102.fmb"
ifcmp90 module=abc102.fmb userid=hr/hr@db module_type=form logon=y batch=n build=y compile_all=y
echo "Generating abc103.fmb"
ifcmp90 module=abc103.fmb userid=hr/hr@db module_type=form logon=y batch=n build=y compile_all=yUsage is:
server:/u1/app/oracle% <b>genforms.sh >> genforms.log</b>Not sure what version you are migrating from, I don't think version 5 of reports exists.

Forms 11g Batch Compilation Script

Hi,
I have seen few threads in this forum on the topic "Batch Compilation of Forms"
For instance batch file to convert fmb to fmx
But i could not find a way to do the batch compilation in Forms 11g?
How do I batch compile my Forms in 11g?
Thanks,
Ram

Nothing has changed from the old versions to version 11. Compilation is done the same way as it always has in the past. The only difference (depending on which version you start from) is the the name and location of the compiler executible. The new file name is frmcmp (.exe if you are using Windows and .sh for Unix). All old example scripts should work in the new version as long as you make this change.

How to reduce the time of compiling in FPGA?

I wrote some code for PID control by using FPGA .But only if a little change is in the code,i have to recompile the code .It takes about 15 minutes per time. It is time-consuming and terrible.
Could anyone have the good way to fix the problem?
Thanks

Unfortunately, when you compile for the actual hardware, you are generating a custom application for an entire FPGA which takes time. To reduce the design cycle, use the development features for executing your code on the desktop to quickly find functional issues. After that, you can simulate the code with Xilinx ISIM or Mentors ModelSim to find cycle-level timing issues. At that point, the code should be ready for deployment and hopefully will work on the first compile for hardware.

Configuration of RTSI_ref_clk for FPGA compilation

Hi All,
I have a target VI which has a HDL Node inside it. I configured the RTSI_ref_clk using the "Compile for a single frequency" option and
generated the bitfile and the functionality of the bit file is as expected.
Now, I want to generate a bitfile which can work for a range of frequencies. For this, I configured the RTSI_ref_clk using the
"Compile for a range of frequencies" option. The generic variable named Clock Frequency of the HDL Node is configured to a fixed frequency irrespective
of the range provided. And when CheckSyntax is done, the following error is displayed.
ERROR:HDLParsers:414 - "C:/DOCUME~1/Test-01/LOCALS~1/Temp/WBM_Tx.vhd" Line 10. The integer value of 4293967296 is greater than integer'high
Can you provide any help to resolve this issue. Please its urgent
Regards,
Raj

Hi all,
Did anyone tried using the "Compile for range of frequencies" option in RTSI_ref_clk properties window?(Under Clocks of FPGA Target - PXIe-5641R)

Batch Compilation of Reports

Hi ,
I have followed the Note:191529.1 and developed a script for a batch compilation.
#UNIX COMPILE REPORTS
#compile_rep.sh
for i in `ls *.rdf`
do
echo Compiling Report $i ...
rwconverter.sh userid=scott/tiger@bs817 batch=yes source=$i
stype=rdffile dtype=repfile overwrite=yes
done
My Code:
for i in `/letters_reports/acesrdf_10/ *.rdf`
do
echo Compiling Report $i ...
rwconverter.sh userid=aces/aces@acesdev1 batch=yes source=$i
stype=rdffile dtype=repfile overwrite=yes
done
--- i am getting the below error for the script.
"compile_rep.sh: line 21: /letters_reports/acesrdf_10/: is a directory"
if i try to test the script for one single report i get the below error:
"compile_rep.sh: line 21: /letters_reports/acesrdf_10/LE-CMG002A.RDF: cannot execute binary file".
Please let me know the correct way.
Thanks,
Yugi

U could try this:
for i in `ls /letters_reports/acesrdf_10/ *.rdf`
do
echo Compiling Report $i ...
rwconverter.sh userid=aces/aces@acesdev1 batch=yes source=$i
stype=rdffile dtype=repfile overwrite=yes
done
If it works, u forgot the "ls" in your loop.
Grtz

Help needed for automatic batch creation for by-products(PP-PI)

Hi,
In the Goods Recpt tab in transaction COR1, we have a field for creating a batch manually for the header material. On clicking on create, a pop up is generated whch facilitates creation of batch for the header material.
At this point, if i go to the material list, I would like to see the same batch number ( same as header) written against the BY-Products.
Essentially, when i create a batch for the header material, it should also create a batch with the same number for the by-product and populate the same in the materials tab.
One important thing to note here is that when we click on create batch icon, the data is stored in a structure and the batch is actually created only when the process order is saved.
Please advise if this can be achived by some standard settings in SAP or do we need to change the standard code. If later is the case, please advise about the point where to insert the required code. I have found a user exit at the point where batch numbe is created manually.
Please advise.

As per SAP Batch definition Batch is the quantity or partial quantity of a certain material or product that has been produced according to the same recipe, and represents one homogenous, non- reproducible unit with unique specifications. So logically you cannot have same batch number for two materials.
If you want to find out the relation between batches of header material and by product that is produced during production, you can use Batch Information Cockpit.
To see batch details in Batch Cockpit (T-code: BMBC), You have activate Batch where used function in IMG using path : Batch management-->Batch Where used list --> make setting for batch where used list.
Regards,
Sachin

Wants to activate batch management for a material which already had a Stock

hi,
i want to activate batch management for a material which already has a stock and open Purchasing documents.
is there any way by which we can do it without removing the same.
please help.

program name is RVBCONVMAT2BM
but i am doubtfull it will be delivered with standard SAP, you need to request you from SAP as they charge for this.
this program convert the material to batch and all relevant dependant documents will be updated with batch no.
Regards,
Pravin Mukkawar
pasting some description of the program
REPORT rvbconvmat2bm.
Report illustrates the call of function module VBZ0401_CONVERT_OBJECTS
which sets the batch management flag for one material including
depending objects. Function module VBZ0401_FILL_BUFFERS helps
improving the performance.
then logic......

Problem in creating Batch job for programs in different servers.

Hi All,
I have a requirement like i have 2 different programs ( PRG1,PRG2 ) running in 3 different SAP servers (SER1,SER2,SER3).
I want to create a batch job for the programs.
Here When I run the PRG1 in Server SER1,it will create a file1 in SER1 as well as the other 2 servers (SER2 and SER3).
It just create a file and there is no content in the file.Once i start writing records to file1in SER1,the same record will be started writing in SER2 and SER3.This is using PRG1.
Once PRG1 will complete writing records in file,Next PRG2 will run in SER2 using file created by PRG1.
I want to create a batch job for PRG1.
How to trigger the PRG2 after completing job1 for PRG1 without any manual interaction.
Please help me for this.

Hi Ambili
You can set steps in these jobs in transaction SM36.
You can define that Job 2 starts after Job1 complete sucessfully and same game for other jobs.
Please, check attachment for detailed information about that
Kind regards
Edited by: Carlos Machado on May 27, 2010 6:01 PM

Is it possible to activate Batch Management for a material without Class?

Dear Experts,
Is it possible to activate Batch Management for a material without having Class & Characteristics maintained. As my requirement is to procure Fuels in Batches only with external no. assignment without any parameters to be checked at the time of Goods Receipt? Batches are needed for Accountability purpose.
Regards

>
Chandan H N wrote:
> Dear Experts,
>
> Is it possible to activate Batch Management for a material without having Class & Characteristics maintained. As my requirement is to procure Fuels in Batches only with external no. assignment without any parameters to be checked at the time of Goods Receipt? Batches are needed for Accountability purpose.
>
> Regards
Please check this answered link:
Batch-classification view
If you want classify a batch, then you should have maintained the batch classification in material master which is either class 022 or class 023 (depends on your batch level set in cusotmizing). The material class 001 has no impact on the batch classifcition, it is what it is: a classification for the material.
Edited by: Afshad Irani on Jun 20, 2010 4:40 PM

Batch input for IQ02 not accepting "yes" for 'POPUP_TO_CONFIRM'

Hello,
I wrote a batch input for a transaction (IQ02) and all works fine except one thing:
-when all data is entered and SAVE button is pressed, there is an additional pop-up, from an user exit which needs an YES/NO answer.
The function module used to display the popup is: 'POPUP_TO_CONFIRM'
I do not manage to press the YES button. This is the data I receive when pressing F1 on YES button:
Program SAPLSPO1
Function OPT1
Normally, in batch input, this is the way I pass user-commands:
PERFORM bdc_dynpro USING 'SAPMIEQ0' '0101'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
But it's not working for this particular situation.
Any ideas?
Thank you.
Edited by: Julius Bussche on Jan 5, 2009 2:07 PM
Quality of subject title improved.

Hi
Find out under which condition popups appears.
for that condition you have to put the following code
PERFORM bdc_dynpro USING 'SAPLSPO1' ''<SCREEN_NUMBER>'.
PERFORM bdc_field USING 'BDC_OKCODE' '=OPT1' .
Hope this helps,
Rajat

Batch compile for FPGA?

Similar Messages

Maybe you are looking for