Battery state not present

Hi everybody
I have a Acer Aspire 5820TG TimelineX which is a really good laptop. But I have a big problem. I can't read the state of the battery.
This is what I get from acpi -V,
Battery 0: Unknown, 0%, rate information unavailable
Battery 0: design capacity 4400 mAh, last full capacity 4400 mAh = 100%
Adapter 0: on-line
Thermal 0: ok, 40.0 degrees C
Thermal 0: trip point 0 switches to mode critical at temperature 105.0 degrees C
Thermal 0: trip point 1 switches to mode passive at temperature 98.0 degrees C
Cooling 0: LCD 0 of 9
Cooling 1: LCD 0 of 9
Cooling 2: Processor 0 of 10
Cooling 3: Processor 0 of 10
Cooling 4: Processor 0 of 10
Cooling 5: Processor 0 of 10
from /proc/acpi/battery/BAT1/state
present: yes
design capacity: 4400 mAh
last full capacity: 4400 mAh
battery technology: rechargeable
design voltage: 11100 mV
design capacity warning: 300 mAh
design capacity low: 132 mAh
cycle count: 0
capacity granularity 1: 32 mAh
capacity granularity 2: 32 mAh
model number: BAT1
serial number: 11
battery type: 11
OEM info: 11
As you can see, ACPI is well aware that the battery is present and its infomation
Some output from dmesg | grep ACPI if it helps
BIOS-e820: 00000000bb73b000 - 00000000bb7bf000 (ACPI NVS)
BIOS-e820: 00000000bb7e1000 - 00000000bb7ff000 (ACPI data)
modified: 00000000bb73b000 - 00000000bb7bf000 (ACPI NVS)
modified: 00000000bb7e1000 - 00000000bb7ff000 (ACPI data)
ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
ACPI: XSDT 00000000bb7fe120 0007C (v01 ACRSYS ACRPRDCT 00000001 01000013)
ACPI: FACP 00000000bb7fc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: DSDT 00000000bb7ed000 0BA9D (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: FACS 00000000bb75f000 00040
ACPI: ASF! 00000000bb7fd000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: HPET 00000000bb7fb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: APIC 00000000bb7fa000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: MCFG 00000000bb7f9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: SLIC 00000000bb7ec000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: BOOT 00000000bb7e9000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: ASPT 00000000bb7e5000 00034 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: WDAT 00000000bb7e4000 00224 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: SSDT 00000000bb7e3000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: SSDT 00000000bb7e1000 01E0F (v01 AmdRef AmdTabl 00001000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
#6 [0000012000 - 0000016000] ACPI WAKEUP
ACPI: Core revision 20100121
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bb691c18 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bb68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bb690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000bb68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Root Bridge [CPBG] (0000:7f)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS
pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: ACPI _OSC failed
pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: ACPI _OSC failed
pcieport 0000:00:1c.5: Requesting control of PCIe PME from ACPI BIOS
pcieport 0000:00:1c.5: Failed to receive control of PCIe PME service: ACPI _OSC failed
ACPI: resource 0000:00:1f.3 [io 0x4000-0x401f] conflicts with ACPI region SMBI [io 0x4000-0x400f 64bit pref disabled]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: Power Button [PWRB]
ACPI: Lid Switch [LID0]
ACPI: Sleep Button [SLPB]
ACPI: Power Button [PWRF]
ACPI: Thermal Zone [_TZ] (40 C)
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: WMI: Mapper loaded
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
I'm using the latest kernel from [testing] (2.6.34-ARCH).

docwario wrote:you should try to update the bios with the latest one from acer (actually 1.13),
battery state is now available
I updated BIOS to v1.15 - still no solution. I have, however, found out why I can't see if the battery is charged or not. Appearantly, Acer is not using the standard ACPI spec. Just look at this:
Intel ACPI Component Architecture
ASL Optimizing Compiler version 20100121 [Feb 6 2010]
Copyright (c) 2000 - 2010 Intel Corporation
Supports ACPI Specification Revision 4.0
dsdt.dsl 5231: Method (_Q0E, 0, NotSerialized)
Warning 1088 - ^ Not all control paths return a value (_Q0E)
dsdt.dsl 6596: Name (_T_0, Zero)
Remark 5111 - Use of compiler reserved name ^ (_T_0)
dsdt.dsl 6600: Name (_T_1, Zero)
Remark 5111 - Use of compiler reserved name ^ (_T_1)
dsdt.dsl 6659: Name (_T_0, Zero)
Remark 5111 - Use of compiler reserved name ^ (_T_0)
dsdt.dsl 6663: Name (_T_1, Zero)
Remark 5111 - Use of compiler reserved name ^ (_T_1)
dsdt.dsl 6831: Name (_T_0, Zero)
Remark 5111 - Use of compiler reserved name ^ (_T_0)
dsdt.dsl 6835: Name (_T_1, Zero)
Remark 5111 - Use of compiler reserved name ^ (_T_1)
dsdt.dsl 6894: Name (_T_0, Zero)
Remark 5111 - Use of compiler reserved name ^ (_T_0)
dsdt.dsl 6898: Name (_T_1, Zero)
Remark 5111 - Use of compiler reserved name ^ (_T_1)
dsdt.dsl 7777: Name (_T_0, Zero)
Remark 5111 - ^ Use of compiler reserved name (_T_0)
dsdt.dsl 7870: Name (_T_0, Zero)
Remark 5111 - ^ Use of compiler reserved name (_T_0)
dsdt.dsl 7874: Name (_T_1, Zero)
Remark 5111 - Use of compiler reserved name ^ (_T_1)
dsdt.dsl 7941: Name (_T_2, Zero)
Remark 5111 - Use of compiler reserved name ^ (_T_2)
dsdt.dsl 8008: Method (OEMN, 0, NotSerialized)
Warning 1088 - ^ Not all control paths return a value (OEMN)
dsdt.dsl 8105: Name (_T_0, Zero)
Remark 5111 - ^ Use of compiler reserved name (_T_0)
dsdt.dsl 9124: Name (_T_0, Zero)
Remark 5111 - Use of compiler reserved name ^ (_T_0)
dsdt.dsl 9152: Name (_T_1, Zero)
Remark 5111 - Use of compiler reserved name ^ (_T_1)
dsdt.dsl 9182: Name (_T_0, Zero)
Remark 5111 - ^ Use of compiler reserved name (_T_0)
dsdt.dsl 9248: Method (_WED, 1, NotSerialized)
Warning 1088 - ^ Not all control paths return a value (_WED)
dsdt.dsl 9248: Method (_WED, 1, NotSerialized)
Warning 1081 - ^ Reserved method must return a value (_WED)
dsdt.dsl 9254: Return (OEMN ())
Warning 1093 - ^ Called method may not always return a value
dsdt.dsl 9399: Method (WMBH, 3, NotSerialized)
Warning 1088 - ^ Not all control paths return a value (WMBH)
dsdt.dsl 9456: Method (WMBI, 3, NotSerialized)
Warning 1088 - ^ Not all control paths return a value (WMBI)
dsdt.dsl 9518: Method (WMBJ, 3, NotSerialized)
Warning 1088 - ^ Not all control paths return a value (WMBJ)
dsdt.dsl 9616: Name (_T_0, Zero)
Remark 5111 - ^ Use of compiler reserved name (_T_0)
dsdt.dsl 9661: Name (_T_0, Zero)
Remark 5111 - ^ Use of compiler reserved name (_T_0)
ASL Input: dsdt.dsl - 12143 lines, 396315 bytes, 5129 keywords
AML Output: dsdt.aml - 47766 bytes, 1103 named objects, 4026 executable opcodes
Compilation complete. 0 Errors, 8 Warnings, 18 Remarks, 6 Optimizations
So I properly need to make a correct DSDT table to solve my problem. However, I can't make heads or tails in the ACPI spec document, and most infomation about such a issue is highly outdated.

Similar Messages

Power Keyboard battery is not present

My power keyboard battery is not present. nokia SD-42
Moderator's Note: The subject was changed as we have created a new thread for this topic.

Hi, mananah_Lumia. To verify, you received the Nokia Power Keyboard without a battery, is that correct? If so, where did you purchase it and did you inform them about it? If we got you wrong, feel free to correct us. We look forward to your reply. Good day!

Battery #2 not present after windows 8.1 upgrade

battery #2 not present after windows 8.1 upgrade. I am using sony vaio laptop model VPCZ2390X

Hi aalmoeen,
Thank you for visiting Sony Community!
I assume your computer has an extended battery pack, right? Are you using a genuine Sony battery packs? Please follow these steps to isolate the issue:
Power Cycle
Turn off the laptop -> push and hold the battery off button for 5 seconds located on the bottom of the laptop. (You may use safety pin).
Remove the battery pack and install it once again. Test the laptop again.
Remove the battery pack -> push the battery off button -> install the battery pack once again.
Reset BIOS
Run Vaio update and Windows update.
Make sure you have the updated drivers and software, check on eSupport website.
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Hope these steps help.
Thanks,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

2610 signal & battery state not visible

The display on my 2610 is difficult to see in bright light. I have set contrast to maximum and selected the basic theme to get black on white however the battery state and signal strength bars are still in light blue which is impossible to see in bright light. How do I change the colour of the bars to black?

go to display settings and you can select diff colours
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Battery state not updating

ok so I'm running arch linux on my laptop (Lenovo IdeaPad 510 G) and I've got a problem wit my battery, it doesn't update it's state to power managers (meaning that both xfce power manager and batti get an initial reading when I turn my laptop on but then they stop updating the battery state, so if I start my laptop with 100% battery that is what they will show for the whole session even if it drops to 1%), I've checked the wiki and tried using acpi, neither the battery nor the ac modules run but when I use acpi -i I do get my correct battery state.
I'm starting to run out of ideas here, has anyone faced this kind of problem before?

This is due to a recent upower update. upower 0.99 uses a whole new set of api's which means that all the power managers need to be updated to work with it. I had the exact same issue on MATE but mate-power-manager got patched yesterday which fixed the issue. Until xfce4-power-manager is patched, you'll need to use an alternative battery applet that does work with the new upower (if there is one) or downgrade to an older version of upower. Here's the link if you want to downgrade: http://seblu.net/a/arm/2014/03/31/extra/os/x86_64/
EDIT: Don't bother downgrading upower. The issue has already been reported: https://bugs.archlinux.org/task/39893
and a new version of xfce4-power-manager which fixes the issue is in the testing repo: https://www.archlinux.org/packages/test … r-manager/
Last edited by Chazza (2014-04-26 15:05:45)

Battery #1: Not present

Two days ago the tablet was just running fine without being connected to the keyboard.
Right now as soon as I`ve plugged it out it stops running - no battery.
I can't even turn on helix without keyboard.
Solved!
Go to Solution.

I just opened the tablet by myself, and I found that the connector of the main battery is lose.
So I just pressed the connector lightly, and it works well now!!!
here is the instructions of how to open the tablet, just so easy
http://support.lenovo.com/en_US/product-and-parts/detail.page?&DocID=PD026804
http://support.lenovo.com/en_US/product-and-parts/detail.page?&DocID=PD026805

Hp Envy states second battery not present

My second battery states not present. Please help me to solve this issue. I love this compuuter. And my warranty have already expired.

@razalijamsuri ,
Welcome to the HP support forums and thank you for posting. So that I can better help you with your battery issue, I will need a little more information. Here are some links to check out first.
Advice for asking the "Very Best Question"
Could you post back with your full model and product number.
How Do I Find My Model Number or Product Number?
As well when you state a second battery. Is it an hp original part or is it a third party battery.
Any information would be great. Please include your notebooks Operating System as well.
Which Windows operating system am I running?
I hope to hear back from you soon. Have a great day and thank you again for posting.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Split x2 battery not present

Hi,
If i have my computer docked in the keyboard, it will not work unless i have the power cord plugged in. It will keep chiming and the wifi light will blink. Also then when i do plug it in and click the power icon it shows battery # 2 not present. Or sometimes it will just show battery #1 and not even show that there is a battery # 2. I've attempted to run the battery check however it only comes back as battery 1 is good and doesn't give me anything for battery # 2. Any help or ideas would be greatly appreciated.
Thanks

Hi ZachHopper,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you have a battery problem. Because it cannot be found you are unable to test or calibrate it.
I suggest contacting HP support for assistance with this issue.
Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Battery 1 plugged in, charging. Battery 2 is not present

Hello,
I have an HP Elitebook 8440p, like three months ago it started to shut down everytime I unplugged the AC power, and to not cherging the battery at all, then appered a message "battery 2 is not present". I recently changed the battery, it is bigger since I thought it would be better, but now it is out of charge and I am on the same problem, plugged to the AC power but it is stocked on 1% of charge, it says Battery 1 is plugged in, charging; baterry 2 not present; but do not charge the battery at all, if I unplugged the power my notebook shuts down.
I tried following some steps I found posted on some other users, but nothing works out.
Please help me.
Thank you.

Hello diegoL90,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook computer is producing an error message: "Battery 2 not present," and I would be happy to guide you towards a resolution!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at:
http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-EliteBook/bd-p/bsc-274
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

My hp mini 110-3700 laptop say battery not present

My hp mini 110-3700 laptop say battery not present, but i can see the battery s/n under the system info

Please how can i fix this? I need your help please

JTA transaction is not present or the transaction is not in active state

Hi,
I am trying to execute an asynchronous bpel process. the bpel process has 5 OSB calls and is taking approximately 100 seconds for completion. The OSB calls in the BPEL are taking 90 seconds for completion. In the end of the BPEL process, after completion I get the following error:
[2010/07/22 01:56:44] BPEL process instance "1220007" completed
[2010/07/22 01:56:44] There is a system exception while performing the BPEL instance, the reason is "JTA transaction is not present or the transaction is not in active state. The current JTA transaction is not present or it is not in active state when processing activity or instance "1,220,007". The reason is The execution of this instance "1220007" for process "BPELProcess1" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information.. Please consult your administrator regarding this error. ". Please check the error log file for more infromation. Please try to use bpel fault handlers to catch the faults in your bpel process. If this is a system exception, please report this to your system administrator. Administrator could perform manual recovery of the instance from last non-idempotent activity or dehydration point.
We do not want to increase the transaction-timeout properties in the server in the Transaction-manager.xml or in the orion-ejb-jar.xml since we have other projects with synchronous processes running in the same server.
Can anybody please suggest a workaround to overcome this issue apart from increasing the transaction-timeout?

Hi 783703,
As Sridhar suggested for your problem you have to set transaction-time out in j2ee/home/config/transaction-manager.xml.
If you use Idempotent as false for your partnerlinks, BPEL PM will store the status till that invoke(Proof that this invoke gets executed).
So better to go for increasing the time instead of going for idempotent as it has some side effects.
And coming to dehydration ....Ideally performance will be more if there are no much dehydration poitns in our process. But for some scenarios it is better to have dehydration(ex: we can know the status of the process...etc)
Dehydration store will not get cleared after completion of the process. Here dehydration means ....it will store these dtails in tables(like Cube_instance,cube_scope...etc).
Regards
PavanKumar.M

Elitepad battery "not present"

Hi!
I've got an Elitepad 900 from My mothers job because no one used it. When i plugged in the charger it worked but When i took the charger out it turned into black.
it says that the battery # 2 is "not present" and the tablet only works when the charger is plugged in. What has happened? Is there anything i can do?
Hope someone have an answer!

Hey @Flirret ,
To get your issue more exposure I would suggest posting it in the commercial forums since the ElitePad 900 is a commercial product. You can do this here HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
The support page for your product may be helpful in the meantime: HP ElitePad 900 G1 Tablet.
I hope this helps!
Thank you for posting on the HP Forums.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Macbook 13.3 with new battery and new magsafe adaptor will not charge above 80% no indicator light on charger display states "not charging" while attached to charger

macbook 13.3 with new battery and new magsafe adaptor will not charge above 80% no indicator light on charger, display states "not charging" while attached to charger

rgregoryadams wrote:
macbook 13.3 with new battery and new magsafe adaptor will not charge above 80% no indicator light on charger, display states "not charging" while attached to charger
You'll want to reset your SMC (System Management Controller). Instructions are simple:
http://support.apple.com/kb/ht3964

Getting "JTA transaction is not present" error while updating db table.

Hi All,
In one of my BPEL process, In a loop, I am updating value of database column Flag from 0 to 1. It was working fine in dev environment, but failed in Prod with below errors, Can Any one suggest on this.
There is a system exception while performing the BPEL instance, the reason is "JTA transaction is not present or the transaction is not in active state. The current JTA transaction is not present or it is not in active state when processing activity or instance "1020112-BpInv7-BpSeq14.87-2". The reason is The execution of this instance "1020112-BpInv7-BpSeq14.87-2" for process "UpdateOrderReqABCS" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information.. Please consult your administrator regarding this error. ". Please check the error log file for more infromation. Please try to use bpel fault handlers to catch the faults in your bpel process. If this is a system exception, please report this to your system administrator. Administrator could perform manual recovery of the instance from last non-idempotent activity or dehydration point.
OPMN logs:
<2010-05-05 01:56:49,395> <ERROR> <gemptp.collaxa.cube.engine> The execution of this instance "1020112-BpInv7-BpSeq14.87-2" for process "UpdateOrderReqABCS" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information.
The current JTA transaction is not present or it is not in active state when processing activity or instance "1020112-BpInv7-BpSeq14.87-2". The reason is The execution of this instance "1020112-BpInv7-BpSeq14.87-2" for process "UpdateOrderReqABCS" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information..
The current JTA transaction is not present or it is not in active state when processing activity or instance "1020112-BpInv7-BpSeq14.87-2". The reason is The execution of this instance "1020112-BpInv7-BpSeq14.87-2" for process "UpdateOrderReqABCS" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information..
The current JTA transaction is not present or it is not in active state when processing activity or instance "1020112-BpInv7-BpSeq14.87-2". The reason is The execution of this instance "1020112-BpInv7-BpSeq14.87-2" for process "UpdateOrderReqABCS" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information..
Thanks in advance.

I can envisage this happening only in a case where the update is taking a longer time than the value of JTA transaction timeout.
Is this happening for all BPEL instances or some of them get thru succesfully ?
Are you EVER updating that particular row of your table ( before/after) ?
-Shishir

The source or target cluster ID is not present on the system!

Hi,
During System copy, we are facing issue "Run Java Migration Tool kit"
Phase of Sapinst.
I could found exact error messages sequences which may help you in
understanding the problem.:
==========================================
#Start preparing switch.
#The switch.properties could not be read. Reason: switch.properties (No
such file or directory)
The source or target cluster ID is not present on the system! The
current (source) cluster ID is 787075 and the new (target) cluster ID
is 3137675
==========================
Last error message might be quite familiar to you as this is very
common error message however just wanted to inform you that the "SAP
Note 966752 - Java system copy problems with the Java Migration
Toolkit" could not help me out.
all the possible entries have been updated and retried but no success.
Please suggest if you have face similar kind of problem.
Thanks.
Cheers !!!
Ashish

Hi,
cluster ID is just combination of below parameters:
In our case, my source system (ABC) was refreshed from another system (XYZ) recently
so while installing target system ( DEF), I changed the source system details from ABC to XYZ in below file and retried the
SAPinst screen. System copy has got completed successfully.
Open the file <installation directory>/jmt/cluster_id_switch.properties and edit the line
src.ci.sid=
src.ci.instance.number=
src.ci.instance.name=
src.ci.host=
If in your case source system is not refreshed recently; You may try with functional host name or OS host name etc. details for above parameters.
If this does not work check details of "SAP Note 966752 - Java system copy problems with the Java
Migration Toolkit" which says almost the same thing but I could not get that as the statements related to
box number are bit confusing and contradictory.
Cheers !!!
Ashish

Battery state not present

Similar Messages

Maybe you are looking for