BDLS is not converting DataSource source systems

After running BDLS on our BW system to convert from logical system DV1220 to ED2CLNT220 we found that the source system assignments for our datasources are not getting converted. Specifically table RSISOSMAP which holds the mapping between the infosource and the OLTP system. We did check several of our ODS's and Info-cubes and the logical system were changed from DV1220 to ED2CLNT220.
Any help would be appreciated.
Regards,
Mike...

Mike,
After running BDLS, you need to replicate the source system in BW, change the contents of the target host and fields for all R/3 and Data Mart(note 184754). Update the target BW system name in table T000 using SM30. Change logical system name in all BW tables using BDLS (note 325525)
Refer to the below doc for detail. Also refer to note 886102.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/805eefcd-5428-2d10-c0ab-dc27a95b2c81?quicklink=index&overridelayout=true]
Below note talks about similar issue.
How to change all infosources to the new source system automatically
Hope this helps.

Similar Messages

BI 7.0, BDLS is not converting all logical systems for datasources

Hello all,
We have refreshed an ECC system, and during the post steps in BI, we were running into issues.
We've ran BDLS to convert the logical system from ECCCLNTXXX to ECCCLNTYYY, but it's was not converting for several datasources.
One in particular was causing several problems, and terminating the conversion.
0FC_CI_01. It is still hanging on to the old logical system. BDLS terminates with the following information:
Short text:
Active version of emulated 3.x DataSource 0FC_CI_01 cannot...
Basically, the exact symptom of Note 936644.
Eventually, through a series of trials, we discovered we could assign non-active sourcesystem/logical system combinations to the objects. As a result, we deleted the source systems entirely, ran BDLS to the ECCCLNTYYY, then recreated the sources.
This finally worked. What I need now is a root cause. Why would BI refuse to change the logical system of an object to an active one, but have no problem with an inactive?

Mike,
After running BDLS, you need to replicate the source system in BW, change the contents of the target host and fields for all R/3 and Data Mart(note 184754). Update the target BW system name in table T000 using SM30. Change logical system name in all BW tables using BDLS (note 325525)
Refer to the below doc for detail. Also refer to note 886102.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/805eefcd-5428-2d10-c0ab-dc27a95b2c81?quicklink=index&overridelayout=true]
Below note talks about similar issue.
How to change all infosources to the new source system automatically
Hope this helps.

DataSource 2LIS_11_VAHDR does not exist in source system ECDCLNT100 of vers

Hi iam working on BI 7 and ECC 6 system. When i try to install the transfer rules for 2 lis_11_vahdr in BI7 business content, it gave a message that "<b>DataSource 2LIS_11_VAHDR does not exist in source system ECDCLNT100 of version A".</b> i have done an enhancement for this.I activated them from rsa5, activated both in LBWE as well as activated thier structures too after enhancing. I replicated and did all possible steps still iam unable to find.
Can anybody help me who has faced similar issue.
Regards,
Neil

Hi Niel,
Could you chek the RFC Connection of particular client.
Thanks,
Ram

DataSource 80SD_O03 does not exist in source system of version A

Hi,
While Activating the Standard DSOs i'm getting this "DataSource 80SD_O03 does not exist in source system of version A".
Regards,
Devi.

Hi,
Hope you followed the same in R/3
Datasource: Rsa5->RSA6
BI Side:
Rsa1->BI Content->Select Datasource->Installation->Replicating/Activating the DS
And same procedure for Infoprovider too.
Please analyze closely about the procedure, some where you are missing something.
Regards,
Suman

DataSource ***** does not exist in source system ***** of version A

dear masters,
i m new to BI i m creating one report in BI. for that i m taking the data from Excel file. for that i have created the source system
and data source i saved and activated the data source. in data source preview i checked the data its coming properly as i given in
excel sheet. after that i m creating the infopackage while creating it i m getting the error DataSource ***** does not exist in source system ***** of version A. i checked data source in RSA2 but in this it is showing The DataSource DS_PO85 does not exist in version A also i checked in RSA3 its showing The DataSource DS_PO85 does not exist in version A.
pls help me how to overcome this problem.... where i m missing which setttings...
regards,
vicky

Hi Vicky,
Go to RSA1--> Data Source --> Find the data source (for which the load is getting failed)
Now Change and activate the data source again.
Both the status and version should be activated green.
Also you can use the check button to check the DS.
Thanks,
Naween

Transport Error - DS does not exist in Source system

Dear All,
I am getting below Error while transporting the DSO from DEV to Quality.
DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A.
I have checked the dataosource is active and available in Development system. But Its giving error while importing.
As per the dataflow the data of this DSO is updated to Cube.
Has anyone solved this issue, because i have checked in SDN but there are no suitable answers.
Regards
Sankar

Hi,
Your right I am transporting ZM_ALT Dso . The following log of the error we are getting.
DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A
Mapping between data source 8ZM_ALT and source system DCQCLI041 is inconsistent
DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A
Field /BIC/ZM_AA will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_APPL will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_BEM will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_MOD will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NCDS will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NDESC will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NES1 will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NES2 will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NIN will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NPCS will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NPN will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Regards
Sankar

Info Source 80FIGL_O06 is not defined in source system

Hi BW Experts,
When I am trying load data from ODS to Cube, I am getting a error messgae stating:
Info Source 80FIGL_O06 is not defined in source system
Error in Source system
This is an urgent issue. Please let me know if you have any suggestions...
Regards,
Reddy.

You can do this 2 ways. Right click on the ODS and say generate export datasource. The datasource will start with 8... and you can find that under Datamarts in RSA1-> Infosource. You can then create an infopackage and load from ODS through the update rules. You have the option of full load or delta load.
The other way you can go about this is again right click on the ODS and say update to data targets and just follow from there.
Did you follow the above steps? Where exactly is your problem?

Data source 80BP_ID does not exists in source system

Hi All,
I have just started with standard content for SD module.
I activated my datasources 2lis_11_vaitm and 2lis_12_vcitm in my R3 system.
After replicating these data sources in my BI system i went to BI Content to activate my Info sources.
While installing info sources 2lis_11_vaitm and 2lis_12_vcitm i got errors namely
Data source 80BP_ID does not exists in source system
Datasource 80BP_REL not maintained.
Can somebody pls suggest a way out.
Thanks in advance..
Regards,
Rohit

Hi Rohit,
When ever you try to install the SD related Standard business content then it will automatically pick up the CRM related data. the 0BP_ID, these are related to the CRM.
Please uncheck the unrelated objects while installing the STD content.
you can select the option in the grouping as ONLY NECESSARY OBJECTS.
Regards,
Ravi Kanth

Field not delivered by source system - Deleted from rule

Dear Support,
While activating business content for example 0CRM_COMP,
I get the following error:
Field TYPE not delivered by source system -> Deleted from rule
Field CAMP_TYPE not delivered by source system -> Deleted from rule
Field CAMP_TYPETX not delivered by source system -> Deleted from rule
Similar errors for different fields appear.
My system config is
BI 7.0, SP14
BI Cont 703 Sp6
Any fix or solution will be suitable awarded.
Thanks and Regards
Raj Jain

HI Raj,
The business Content is not always consistent.
If you get messages like that, the best way to deal with them is to manually adjust the objects.
In this case it means that you will have to check the datasource. It may be that in R/3 you will have to "unhide" or add some fields to the datasource. (I cannot be sure as I cannot go into details).
Hope this helps,
Udo

Infosource is not defined in source system.

Hello Expert,
We have problem on data upload. The Infosource is ODS object generated. Now through RSMO, message is:
Infosource 8* is not defined in source system.
How to re-define/active this type infosource? Is there any impacts?
BTW, days ago, it ran very well.
Thanks
XY
Edited by: xy chen on Nov 14, 2008 11:47 AM

Hi,
I am also facing the similar error, whne uploading data from an ODS to further data targets.
I did follow th instructions advised, and I tried searching in the Service Market Place with the term,
" " Infosource is not defined in source system " " but couldnot find any correction notes.
Could you let me know the notes, you followed up to resolve this issue,
Thanks in advance,
Cheers,
Neela

Not converting the logical system through BDLS

Hi Experts,
I did the system copy of BI system from production to developemnt
To change the logical system in RSA1 --> Source systems
I have choose client role as test in scc4 and in tcode BDLS i have given the old logical system name new logical system name
after completing the job RBDLSMAP i checked in the RSA1 there is no change in logical sytem
i got the following message
SM37 log
Job started
Step 001 started (program RBDLSMAP, variant &0000000000005, user ID ABCD)
Logical system name ABC500-1 does not match SAP's recommendation
Job RBDLSMAP no longer exists
Converted table: 'RSSTATMANSTATUS'; number of changes: ''
Converted table: 'RSSTATMANSTATDEL'; number of changes: ''
Converted table: 'RSSTATMANREQMAP'; number of changes: ''
Converted table: 'RSSTATMANREQMDEL'; number of changes: ''
Converted table: 'RSSTATMANPSA'; number of changes: ''
Converted table: 'RSMDATASTATE_EXT'; number of changes: ''
Job finished
Spool log
Table Name                Field Name       Number of Relevant Entries    Number of Converted Entries
/BI0/ABP_CUST00*          LOGSYS                              0                              0
/BI0/ABP_CUST40*          LOGSYS                              0                              0
/BI0/ABP_VEND00*          LOGSYS                              0                              0
/BI0/ABP_VEND40*          LOGSYS                              0                              0
/BI0/ACDS_DS0400*         LOGSYS                              0                              0
/BI0/ACDS_DS0440*         LOGSYS                              0                              0
/BI0/ACDS_DS0500*         LOGSYS                              0                              0
/BI0/ACDS_DS0540*         LOGSYS                              0                              0
/BI0/ACLM_DS0300*         CLM_FISY                            0                              0
                          LOGSYS                              0                              0
/BI0/ACLM_DS0340*         CLM_FISY                            0                              0
                          LOGSYS                              0                              0
/BI0/ACLM_DS0600*         CLM_FISY                            0                              0
                          LOGSYS                              0                              0
/BI0/ACLM_DS0640*         CLM_FISY                            0                              0
                          LOGSYS                              0                              0
/BI0/ACRM_CMGL00*         LOGSYS                              0                              0
/BI0/ACRM_CMGL40*         LOGSYS                              0                              0
/BI0/ACSM_LINK00*         LOGSYS                              0                              0
/BI0/ACSM_LINK40*         LOGSYS                              0                              0
/BI0/AGN_BP00*            GN_PAR_LSY                          0                              0
/BI0/AGN_BP40*            GN_PAR_LSY                          0                              0
/BI0/AGN_CONV00*          LOGSYS                              0                              0
/BI0/AGN_CONV40*          LOGSYS                              0                              0
Could any body help me in this
Thanks & Regards,
Arun

Hi experts,
I have done the system copy form Production to Developement.
Transfermations and DTP(Data transfer process) are still connected from Produciton R3 which should be from developemnt R3.
I have tryied to change the logical sytem name through BDLS. But the logical system name is not changed
i got the job log which is in above conversation in my thread.
Please let me know how to change the logical system name in Transfermations and DTP in RSA1
Thanks & Regards,
Arun

BDLS for conversion of logical source system name

Hello All,
I am trying to reassign a new source system NEW1 by replacing old source system OLD1 using BDLS in the source system.
But the NEW source system logical system name already exists as I created it . Can I delete the new source system and then use BDLS?
How do I make sure that the reassignment happens correctly?
And what precautions should be taken to avoid further consequences?
Regards,
NIKEKAB

BDLS does a pretty good job... Never had issues with it when using it... Always execute a test run, look for warnings or errors...
Yes, you can delete the source system before doing BDLS... I assume, since it is new, nothing is connected to it...
You always will have to check RFC connections, datasources replicas, rules, etc, once the conversion is done...
Make sure you take a look at note 886102, it has very good information and make reference to other relevant notes specific for BDLS, like 121163, 369759, etc... Read the notes carefully, follow the steps and you'll be fine...
Once everything is done and in place, you shouldn't have any surprises in the future... It's just normal maintenance...
Good luck...

Change datasource Source system

Hi Gurus,
I have a few datasources which have "SourceB" as their source system. I would like to create the datasources on "SourceA" and then point these datasources to "SourceA". I think BDLS is the transacion. Has anyone done this, and can give me some tips.
Thank you.

Hi,
Create one more RFC connection in SM59 and source system connection
there would be no problem if you have both the source system connections in your BI.
If you dont need two source system connection. you can delete it.
But the data sources and everything you have to create for your new source system connection i suppose
Regards,
Marasa.

Ctbw data source not found in source system

hi,
by reading and posting couple of threads i was finally able to create a data source in ctbw
0MATERIAL_ATTR 800 001 MARA ATTR 1CL_OMAT002
so i went to rsa3 and tried to test this data source 1CL_OMAT002
i am getting error in this way
<b>DataSource 1CL_OMAT002 is not defined in the source system</b>
can anyone suggest me how to proceed further
and also if the above problem is resolved what should i do in bw side
should i replicate 0MATERIAL_ATTR or 1CL_OMAT002 or both?

Hi,
Have you generated the data source after creation.
in CTBW you will have to click on "generate data source" after you have created and saved the data source.It will activate all the classes used in that data sources.
Once done go to RSO2 and give your data source name there and see if this data source appears there with it's field or not...if not then your data source is not getting generated properly.
Try this and once successful then go to RSA3 and try to extarct data.
Thanks

Job is not running in Source system.

Hi Experts,
One issue I have because of this I am not able to load data into Data sources.
I am in BI 7.0 environment.
when I execute infopackage, total and techinical status are in yellow.
I found in R/3 Job is not running, based on this statement in SM37. from the fallowing.
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
Result of customer enhancement: 0 records
IDOC: Info IDoc 2, IDoc No. 3136, Duration 00:00:00
IDoc: Start = 14.05.2009 07:23:39, End = 14.05.2009 07:23:39
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 3137, Duration 00:00:00
IDoc: Start = 14.05.2009 07:23:39, End = 14.05.2009 07:23:39
Job finished
Job satrt time and end time are same, so job is not running in the sourcesystem, am i right. let me known if i am worng.
It is Standard Data source but in the above statement becasue *result of Customer enhancement:0 records.*
please help me to reslove this issue to load data into BI.
1. what I have to do to run job in source system side.
2. should I take any help from Basis.
Regards
Vijay
Edited by: vijay anand on May 14, 2009 3:02 PM
Edited by: vijay anand on May 14, 2009 3:04 PM

Hi Rupesh,
in RSA3 data is availbale,
but it is not coming to BI,
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.
the abovemessage I am getting in details tab.
Regards
Vijay

BDLS is not converting DataSource source systems

Similar Messages

Maybe you are looking for