Billing, output, invoice consolidation

Hello friends, I am looking for a document on Billing and output .invoice consolidation.....I cant understand from Standard SAP materiel....so if u have made some document for your reference please share it with me...
Please E-mail me the matereriel on [email protected]
Thanks in advance !!
Best regards,
Lata

Sent the required info to the email given..
Please do check and see if it helps..................
edit : : for some reason my email has bounced back..
here's the stuff..do please refer :
Info on billing—sap help documents---- http://help.sap.com/saphelp_nw04/helpdata/en/e9/ce268db69b11d2956c00a0c93029cf/frameset.htm
For billing output refer these: Set up output condition for billing document.
                                           Output type determination in Billing document
A good information PDF file on the Billing document consolidation: http://www.saptechsolutions.com/pdf/SDBillingDocumentConsolidationAndSplit.pdf
regards
Poorna
Edited by: Poorna Yalamanchili on Feb 20, 2008 2:57 AM

Similar Messages

  • EDI billing outputs are capturing credit memos as well as invoices

    I am a newcomer to the company I am currently with, and to this forum, and I have 6 years of experience in EDI and SAP SD.
    I am working on a project to determine why our EDI billing outputs are capturing credit memos as well as invoices, and attempting to send them by EDI, causing failures in our Seeburger translator.  Most customers donu2019t want credit memos by EDI. My goal is to track backwards and determine what portion of the EDI process in SAP is pulling credit memos rather than just invoices.  I suspect that someone intentionally made changes in the past to put this in place, but we need to have a message type that includes invoices and credit memos, to be attached to specific partners that want this, and another more standard message type that sends only invoices. 
    The message control for the example partner specifies Message Type ZURH (customized by this company for some reason), Application V3 (which seems standard), and process code SD09 (which seems standard).  Could someone help me to navigate to an area where I may be able to find out what parameters are used to determine what transaction types are pulled to be sent out by EDI for billing?  I suspect that the issue may be in Application V3, but I am unable to find any help to view u2018Applicationsu2019, because application is such a widely used word. 
    How can I display/change Application V3, in order to check itu2019s contents?
    Any other ideas why credit memos may be included would be appreciated, and I always appreciate having the transaction codes mentioned as well.
    Thank you in advance for your assistance. 
    Application V3 (what specifies what transaction type this pulls?)
    Message Type ZURH,
    Process Code SD09.
    Access Sequence used is ZSD1 Billing Documents (Access Sequence ZSD1 does not appear in transaction V/48 (?))
    Transmission Medium is 6 EDI.
    The program is RSNASTED, and the FORM Routine is EDI_PROCESSING.

    Satish,
    Thanks for the suggestions.
    I checked transaction VV33 u201CDisplay Output Condition Records: Billingu201D for Output Type ZURH, Key Combination Sales Org/Payer, and I find the example customer  linked to ZURH, as I would expect (5010013645     BEST BUY CANADA  Vendor #41448     PY          6     1). 
    I donu2019t see any data about specific transaction types such as credit memos or invoices, so I may not be looking in the right place.  I donu2019t find entries under any other key combination.  How would I check if Output Condition records are maintained for credit memos?
    In regards to the output type being assigned to the credit memo billing type (ZG2U), Iu2019m afraid I donu2019t know how to check that either. 
    In NACE, I see that u2018Proceduresu2019 list the CTyp (?), and procedure US0001 is the only one that includes credits and debits. I donu2019t recognize the Ctyps ZDN0 and ZCN0. The billing type is ZG2U, which I don't see in any of the Procedures:
    10     1     RD00     Invoice
    20     2     ZPRO     Proforma Invoice
    30     1     ZCAN     Canadian Cust. Inv
    40     1     ZCOM     Commercial Invoice
    50     1     ZDN0     Debit Note
    60     1     ZCN0     Credit Note
    How would I be able tell which u2018Procedureu2019 is being used for Application V3, and how would I change that to another Procedure for testing?

  • Reg : Billing Output Determination( Invoice and Invoice List)

    Hi SAP Gurus
    I have typical requirment for billing output determination.V3.
    Is it possible to create a access sequence = Order type/Plant/Sales Org/Dest ctry for invoice printing.
    can any one help on this requirment.
    second one:
    Is it possible to create a access sequence Billing type/Plant/Sales Org/Dest ctry for invoice list.
    currently i am using Billing type / Sale Org.
    Is possible to maintain access sequence =Billing type/Plant/Sales Org/Dest ctry for invoice list printing.

    HI,
    you can create access sequence with that combination Sales and Distribution --> Basic Functions --> Output Determination --> Output Determination Using the Condition Technique --> Maintain Output Determination for Billing Documents --> Maintain Condition Tables --> Field catalog: Messages for billing documents Go to new entries add the fields you want yo create access sequence and create condition table with your combination
    VBELN        Sales Document
    WERKS          Plant
    VKORG       Sales Org
    LAND1         Destination contry
    FKART         Billing type
    Thanks
    seshu

  • Need info on Billing Outputs

    Hello,
    I need info abt billing Outputs - The language is maintained in Bill to party (Customer master), Its maintained in Condition record, It can be changed while creating the invoice.
    Now my question is, which of the above three cases has got highest priority.
    Could some one provide me some info on this?
    Regards,
    Krishna

    By default, we will maintain language in Bill-to-Party & also Condition record. But if required, it can be chaged at Invoicing level while taking output. Priority will be Bill-to-party, followed by Condition Record.
    Regards,
    Rajesh Banka

  • Create Billing Output from VA01

    Hi everyone!
    I wonder is it possible to create an invoice with billing output immediately?
    I usually use create sales order VA01, create billing due list VF04, create billing output VF31;
    I'd prefer to be able to key on an invocie and for it to create a billing document in my spool right away without having to wait on the overnight process or manually pushing it using VF04 & VF31.
    Any ideas?
    Many many thanks!!!
    Ciara

    Hi,
    For this change to appear we have to go for some seetings.They are mentioned below.
    1.Goto the T.Code "NACE".
    Select the application as "V3(Billing)".
    Click on "Output types".
    Select your output type.
    Click on "Details" or Press "CtrlShiftF2".
    Maintain the value as "4(Send Immediately(when saving the application))" for the field "Despatch time".
    Check the value for transmission meduim.Ithink it is "1(Print output)".
    Save.
    2.Goto the T.Code "VV31".
    Enter your output type.
    Press Enter.Select your valid condition table if multiple tables exists.
    Enter.
    Maintain the valid values.Select that maintained entry.
    Click on "Communication".
    Maintain the output device as "LOCL".
    And also check the box "Print Immediately".
    Save.
    If you create the invoice by using VF01,then the out put will be triggered automatically.
    Or Goto T.Code VA02/VA01.After entering al the values,Click on "Sales document" in th emenu bar and then click on "Billing".
    Even in this case also output will be triggered automatically.
    If you want,then you can reprocess this output by using the T.Code "VF01",by selecting the processing mode as "2".
    Regards,
    Krishna.

  • Document for invoice Consolidation

    Hello Experts,
    Need a small, Pleasse give me if you any documentation on INVOICE CONSOLIDATION.
    Need urgent..
    Thanks,
    Suresh

    Hi Suresh,
    Billing split will be controlled thro 'Data Transfer Routines'. If you
    want to have different split criteria then follow steps as follows:
    1.Write your own data transfer routine which contains your own defined split criteria using the T-Code:VOFM.-Date Transfer->Billing.
    2.Go to Copy control Transaction VTFL select the respective item category and assign the routine in Data transfer field.
    VBRK-ZUKRI is the field where split criteria is defined.
    You can review the SAP note 11162.
    For invoice combination of different divisions, you can review SAP Note 50752.
    Hope this will help.
    Thanks & Regards,

  • Triggering billing output for multiple emails

    Hi Experts,
    We have a scenario wherein a single billing document output gets triggered for multiple emails. The requirement is to send the invoice layout copy to multiple emails where we maintain customer mail ids in customer master record.
    When tried ,we found option in customer master record and maintained multiple email ids to send the billing output.The system has considered first email id from customer master record and did not consider next mail ids from CMR. Could you please suggest now how can we suffice this requirement .
    Thanks in advance.
    KV

    Dear Kv rekha,
    Check whether the following thread helps you.
    http://wiki.sdn.sap.com/wiki/display/Snippets/Howtosendmailtoadistributionlistoragroup+ID
    Thanks & Regards,
    Hegal K Charles

  • Billing output through email

    Hello SDNs,
    I have a requirement to send the billing output directly to the customer(BP) who is receiving billing document but it should be specific customers. Can you please explain where do we maintain for automatic billing output through customer email.
    I have maintained transmission medium as email at billing output type level and maintained output codition record level.
    Outout is not triggering as i have maintained above settings. Can you please guide the steps for getting output through email.
    Regards,
    K

    Hi,
    If you want to sent email to the BP the invoice copy then create your output type in SPRO>SD>Basic Functions>O/P control>O/P determination>O/P determination using condition technique>maintain Output Determination for billing documents.
    Select RD00 and create an output type of your own. In the Default values tab maintain transmission medium "5" and partner function "BP" and Communication Strategy "CS01". Now at left side "Dialog structure " Maintain the values for each one
    In the processing routines maintain medium "5" .Your program ,form routine and form.Also type "2 PDF".
    In partner functions Maintain medium "5" and partner function "BP" these are the configurations when you maintain the new output type.
    After creating the new output type maintain the same in output determination procedure. with Step/Output type (created by you).
    Maintain the email address in customer master of BP.
    Also check in SCOT to ensure the email is triggered

  • Invoice Splits and Invoice Consolidations

    Hi All,
    Can anyone suggest me in regarding the Invoice Spits and Invoice Consolidations and in which transaction  can I find these type of invoices.
    Regards,
    Bharth.

    Dear Bharath,
    1. To split an Invoice follow this:
    VF01 - Enter the Delivery Document Number & from the Menu bar click in the button Selection List
    Here you can select the required items & split the Invoice.
    2. In case of collective Invoices the following need to be the same:
    Payer, Billing date & Payment terms.
    Go to VF01, enter multiple Delivery numbers (with similar Payer / Billing Date & Payment terms) & press enter.
    Hope this helps. ..
    Give points if useful...
    Thanks,
    JIgnesh Mehta

  • Emailing functionality for billing output

    Hello SDN's,
    As per requirement, business needs to send invoice output to customer email directly and business needs to validate the invoice before sending to customer email .Can you please suggest how do we implement this process in as per business requirement.
    I have checked current functionality, as per that business is validating the invoice before sending to customer(not email).
    Please suggest.
    Thanks in advance
    Regards,
    KV

    Hello Guru's
    Based on the discussion, I do have similar business requirement but with little twist, as it can never be same
    I need to configure billing output via ale. which they want in email format to be sent to vistex for further processing.
    Secondly this output has to be for some special customers, business will run a batch by the end of the day to push this docs for further processing to vistex.
    So for this solution do I control it by output routine or maintain access sequence?
    And also which transmission medium should I use?
    Please suggest on this.
    Thanks
    Aman

  • Difference between billing and invoice?

    Hi all
    can anybody say Difference between billing and invoice?
    thanks

    Hi Ipsit,
    Invoice is document indicating to delivery goods and Billing is a receipt of payment
    Tables are VBRK & VBRP. For flow, go to transaction VF03, enter document number and hit 'Display Document Flow' button on toolbar
    VBRK and VBRP holds billing/invoice details..
    Billing Document:
    Generic term for invoices, credit memos, debit memos, pro forma invoices and cancellation documents.
    The tables are VBRK and VBRP.
    2) -- once u do PGI the delivery document will be created. There is no way to stop it.. The thing u can to do go to the list of created deliveries in VL09. Select the delivery doc which u created. There u have the option of reversing the goods or canceling it.
    Billing is generic term and u can say invoice is a type of billing document.
    After PGI only way left is to cancel it by Using TCODE MBST as this Tcode is used to cancel any material document.
    Please Reward If Really Helpful,
    Thanks and Regards,
    Sateesh.Kandula

  • Difference between billing and invoice?  How to stop PGI?

    can u please help me in these questions.
    Difference between billing and invoice?  How to stop PGI?

    Invoice is document indicating to delivery goods and Billing is a receipt of payment
    Tables are VBRK & VBRP. For flow, go to transaction VF03, enter document number and hit 'Display Document Flow' button on toolbar
    vbrk and vbrp holds billing/invoice details..
    Billing Document:
    Generic term for invoices, credit memos, debit memos, pro forma invoices and cancellation documents.
    The tables are VBRK and VBRP.
    2)-- once u do PGI the delivery document will be created . there is no way to stop it  .. the thing u can to do go to the list of created deliveries in VL09.. select the delivery doc which u created.there  u have the option of reversing the goods or canceling it.
    let me know if i am wrong...
    thanks,
    madhan
    Message was edited by:
            madhan n

  • Change End date of billing plan/invoice plan in sales order item(fpla-erdat

    Hi Experts,
    Could you please help to me regarding this issue.
    I need to change  End date of billing plan/invoice plan  in sales order item  of  "billing plan" Tab.( FPLA-ERDAT) for all line items. It is not a one sales order,more than 1000 sales orders.
    How can i change those end date of billing plan for all line litems and all sales orders ( i have input file with sales orders, items, dates.)
    Thanks
    jaya

    Hi ramki,
    I tried with using  MASS  T.code ( bus2032 Object type).
    There are no field  related to Billing plan end date?.if case i done wrong ,tell me what are steps while using MASS T.code.
    now what i can do. or explain
    Thanks
    jaya

  • Change End date of billing plan/invoice plan in sales order item

    Hi Experts,
    Tell me what are tables to be updated,when i changed end date of billing plan/invoice plan ( "billing plan" Tab in sales order item).?
    Thanks
    jaya

    vbrk and vbrp

  • Invoice consolidation

    hi all,
    the customer wants to do invoice consolidation as per customer, item and tax code.
    what are the requirements in the 3 cases for the consolidation to be carried out?
    please guide me.

    hi,
    Can u explain us the solution in detail.
    Thanking you
    FC

Maybe you are looking for