Budget assignment on WBS / Project

Hi Experts,
We are using WBS for the settlement of the Order.
If I to want to restrict on some specified Budget, where we can do that? WBS or Project WBS.
And, will it restrict error on Order settlement if the Budget of settlement is more than assigned Budget?
Thanks!!

Hello!
You can allocate budget on WBS element. Then assign this WBS element in account assignemnt of maintenance order. If you
are exceeding budget limits then system will not allow you to post the actuals (Reservation, Service entry sheet, GR of PO for
non-stock items).
You may allocate budget in t code CJ30. You can also change the budget limit here.
Please reply if there is any doubt.
Regards,
Vaibhav Mishra
Edited by: Mishra_Vaibhav on Jan 27, 2011 8:39 AM

Similar Messages

Check at PR /PO level for budget exceeding in WBS project

Hi experts,
We have a requirement to put check for creation of PR and PO if budget exceeds for a particular WBS.
Kindly suggest the steps to configure the same in PS module.
thanks.

Hi,
It is needed your controlling area has commitment management active. Then you have to make these settings :
SPRO --> PS -->Costs --> Budget
You have to create a budget profile, assign this to your project profile and then you can define tolerance limits for each operation ( warning and error messages),
I hope this can be useful, try to configure it and let us know if you need more information.
Regards,
Sara

How to find out the amount assigned to WBS element

Hello Friends,
Will you please inform how to find out the (amount/value/budget) assigned
to WBS element
Which Table it is stored in?
Thanks in Advance
Bset Regards
Diwakar

Hi Diwakarnd,
You can use any of the following reports to get the information you require.
1. S_ALR_87013557 - Budget/Actual/Variance
2. S_ALR_87013558 - Budget/Actual/Commitment/Rem Plan/Assigned
3. S_ALR_87013559 - Budget/Distributed/Plan/Distributed
Some of these reports use a complex selection criteria from various tables which has been grouped together, logically by SAP. The Logical Database table name for PS is PSJ.
Execute transaction code SE36 -> PSJ -> (Subobject : Radio button Structure) -> Click on Display.
You would see all the underlining tables used.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

Table for WBS project status and budget.

hi,
i am being requested to have a report with project details with the PO and PR.
but i were unable to find the table for the project status (TECO, REL) for a WBS element. may i know want table and what field they were being link?
aside, may i know under what table does the "budget assigned" to a WBS element located at?
thanks

Hi Ben,
in order to retrieve the status of a WBS element, please select into table JEST by object number (JEST-OBJNR = PRPS-OBJNR). This will give you an internal status code (JEST-STAT). Then go to table TJ02 with this internal code and select field TJ02-TXT04: this will give you the external status code.
For the budget, go to tables COSP and COSS, selecting by object number (OBJNR).
I hope this helps. Best regards,
Alvaro

BAPI to assign budget to a WBS element.

hi,
I need to find BAPI to assign budget to a WBS element in a project.
The transaction to do this is CJ30.
Its imp...
Please help..
Thanks & Regards
Shabari

Look at BAPI_RESERVATION_CREATE1
rgd
Frédéric
(next time search the BAPI with transaction BAPI or in ifr.sap.com)

Budget Exceeded Issue - Activated budget profile for existing project

Dear Experts,
I have a Project and not using any budget profile, already actual data exist only in CJI3 no data in CJI5.
Now I assigned Budget Profile in that project.
While entering Budget in T-code CJ30, I can see values in assigned values for a wbs elements.
Example -
WBS Element - XXXXXX-02 - 2000 (Assigned) - Here Budget Profile not assigned in the project
Same WBS Element - Once Budget Profile assigned, when am assigning same 2000 budget am getting budget exceeded issue.
If I give 2500 I am not getting any errors, My tolerance as only Warning message.
Please Suggest - Screenshot attached
Thanks,

Hi Pavan,
As soon you enter your budgeting fig the availability control triggers, this check your assignment with available budget.this the reason you are getting error as you say there are already actual posting in CJI3.In this you need to balance first the fig which is appear in assigned column in CJ30.
Its a good practice to give budget first release it & then start procurement,confirmation etc.
Check this in budget profile availability control.
Regards,
Sachin.

User exit to prevent setting status , if there is no budget allocated to WBS

Hi PS Experts,
Is it normal to experience unlimited purchases if you have forgotten to add budget $$ against WBS?
Customer has following steps
1) User create Project & user status is CREA which prevents most traxn
2) User will allocate budget to WBS & set user status to OPEN which will allow Release of project.
3) Release project & create PR/PO
under step 2, if they forget to add budget any amount of procurement can be done against that WBS.
We are looking at any user exit to prevent release of WBS which doesn't have budget $$ assigned to it.
Are there any?
Thank you so much for help,
Jatin

Hi Shishir,
I am experiencing unlimited PR/PO allowed for WBS without budget/forget to add budget(Blank entry).
Is there a configuration which treats 'Blank' as 0. We are experiencing 'Blank' treated as unlimited( 999999999)
In MM-Physical inventory, there is 'Radio' button to mark 'Zero Count' to make sure user whats to decelare 'Zero' instead of 'Forgot to enter'.Much in similar way , something like this is happening here.
This is probably system reading 'Blank' field as non-zero. is there a way to alter this behavior?
Best Regards,
Jatin

WBS project currency

We have controlling area currency USD, company code currency USD. Is any way to follow WBS project budget in other currency?
Thank's
Edward

Hi Edward,
I have done it several times and it works. Check the following:
- If you want to plan on the basis of object currency, make sure you have selected the object currency in the budget profile.
- Make sure that you assign the correct budget profile in the project master
- In basic data tab of the project master, you assign the Project currency. Check the currency.
- Now when you plan in tcode CJ30 you will find the currecy mentioned in the project master.

Budget Supplement on WBS based on AuC

Hi all !
I'm trying to use CJ37 [Supplement Budget] for a WBS element...
It appears this message "Overall budget and/or annual budget cannot be processed"...
When I go to CJ20n tcode,
Edit > WBS Element > Investment Programs -> Investment Program, in order to assign the WBS to a Invest. Prog., it appears a message "WBS superior element is account assignment element"
Actually, this WBS Invest. Program. is based on AuC (Asset Under Construction).
The question is: how can I supplement budget for this project/WBS element provided that it's not related to a prog. invest. position?
Thanks for help,
Evandro Neves.

Sreekanth,
The targeted project is unlocked, but there are many other projects which are locked (log list bellow)... As a result, I can't split my budget to the superior investment program positions...
Typ Message text
System status LKD is active (WBS PI/3010.10/007)
    System status BMLK is active (WBS PI/3010.10/007)
    System status LKD is active (WBS PI/3040.10/001)
    System status BMLK is active (WBS PI/3040.10/001)
    System status LKD is active (WBS PI/3040.10/007)
    System status BMLK is active (WBS PI/3040.10/007)
    System status LKD is active (WBS PI/3600.10/002)
    System status CLSD is active (WBS PI/3600.10/002)
    System status BMLK is active (WBS PI/3600.10/002)
    System status LKD is active (WBS PI/3010.10/011)
    System status BMLK is active (WBS PI/3010.10/011)
    System status LKD is active (WBS PI/3010.10/012)
    System status BMLK is active (WBS PI/3010.10/012)
    System status LKD is active (WBS PI/3010.10/013)
Thanks in advance,
Evandro Neves.

Asset budgeting through Statistical WBS

Dear Experts,
I have configured and assigned Statistical WBS to Asset to carry out active budgeting. To my knowledge I have configured all relevant configuration but when I create PR over this Asset, WBS field is not updated in the PR and therefore no commitment / budget check is performed.
However, in this same scenario I created internal order and assigned it to WBS. Here then I assigned the Internal Order to the Asset. Budget check in this case runs fine.
As you may see from figure above B-OA01-001-001 is assigned to an Internal Order where it correctly carry out commitment / budget check when I create PR against Asset with Internal Order as Investment Account Assignment. Also it displays Internal Order number along with Asset number in PR account assignment tab.
But when I assign WBS directly to an Asset in origin tab of Asset Master no budget check is carried out while creating PR. Also WBS field is also not updated in PR account assignment tab with Asset.
Note: Budget in both cases is assigned to WBS element.
Regards,
Saif

Salaam Saif!!
You need to do settings in T code ACSET... You must assign WBS Element in ACSET against APC postings
Refer below
Incase you dont find these in dropdown list in ACSET, activate them in ORFA > Integration with the General Ledger> Additional Account Assignment Objects > Activate Account Assignment Objects
Br. Ajay M

Material cost by period for WBS/ Project

Hi, I am working on one reporting requirement.
Requirement is like that material actual cost & quantity which issued to WBS/ Project in perticular period.
I am having some idea. Like COEP table via value type 4 I can fetch the actual cost for the porject.
How to fetch the cost for only material consumbed by proejct.
Please extend your help. so, I get more clear path to work ahead.
Regards
Nitin P.

Hi,
Pls check Automatic Posting account (OBYC).
There is G/L account maintained againt Valuation Class in Transaction GBB.
When u assign material which is having maintained Valuation class , G/L account gets automatically picked up.
using this u can get values from COEP.
Regards,

Pruchase order in MM don't consume budget in the WBS

Hi fiends,
We are doing implementation for Public Sector with EA-PS, MM and PS (ECC 6.0).
We are having problems in the control availability or commitments of the WBS: duplication of the commitments in WPS:
- In EA-PS create a Funds Commitment (FMZ1) : 10u20AC
- In MM create a Purchase order: 10 u20AC
In our model the committed should be 10 u20AC instead of 20 u20AC.
We need that the Pruchase order don't consume budget in the WBS.
Is there any way of doing these operations?
Thanks in advance.
Carlos.

Hi,
In std SAP commitment is created after creating a PR or a PO against the project.so you need to look how to prevent the this.
Wait may be expert will advice you regarding this otherwise you can send request to SAP directly about the requirement they can give you the solution,
Regards,
Muzamil

Production order cost has exceeded the released budget of its WBS

Dear All,
I have got a case where the prod. order cost has exceeded the released budget of its concerned WBS.
I found that the budget check is active and working fine for Prod. order and other activities.
I am not getting , how this default has occured.
Please help me resolving this case.
Regards,
Vishal

If the budget check is active against Released budget and Production order assigned to WBS has crossed released budget. It should not happen.
Please run CJEN and check the report.
Regards
Nitin

Production order cost has overun the released budget of its WBS.

Dear All,
I have got a case where the prod. order cost has exceeded the released budget of its concerned WBS.
I found that the budget check is active and working fine for Prod. order and other activities.
I am not getting , how this default has occured.
Please help me resolving this case.
Regards,
Vishal

If the budget check is active against Released budget and Production order assigned to WBS has crossed released budget. It should not happen.
Please run CJEN and check the report.
Regards
Nitin

Standard network assigning various WBS Elements

Hi,
I am using Standard network and Stand WBS Element for creating actual project.
There are Std WBS Elements, using the same Standard network. As i know, we can assign Std WBS Element in Std network. How can i make it using same std network for various Std wbs element to create actual project as Std network is same for most of the WBS Elements.
I donot want to copy Std network for actual project once we create copying Std Project in CJ20N.
Regards
N.Raju

create more standard wbs - there is no other way

Budget assignment on WBS / Project

Similar Messages

Maybe you are looking for