C7 Freezing/Not charging/Overheating

Ive had my C7 for about 8 months and for the last 3 weeks it has been a nightmare.
The touchscreen constantly freezes. Ive tried re-installing the software, restoring it etc but to no avail. It would sporadically work after removing the battery and waiting for a few minutes but since yesterday it seems to have permanently frozen.
I have attempted to charge it but it just heats up. You could quite happily fry eggs on it.
Unfortunately I bought in abraod so luckily for Nokia it is not covered by UK warranty.
Moderators notes: Post edited due to non constructive remarks. 

Even i purchsed c7 in india. i love its feature but itz freezing nd auto restarts occassionally. when i use it while on chargeit heats so much tht u cant even touch it on back side or hold n ur hand
NOKIA C7 IS FAILURE FOR NOKIA THTS Y THEY DISCONTINUED THIS MODEL AND LAUNCHED NOKIA 701 INSTEAD.

Similar Messages

  • Cancel the purchase of in game blood and glory legend because of it, but was was not charged to do.

    cancel the purchase of in game blood and glory legend because of it , but was not charged to do.

    Hi,
    Usually, when my vintage (as in, bought in 2006) MBP did that, it was because it was overheating, as you suspect. Now, you've got yourself a brand-new machine, and I'm sure there are many posts in this forum related to that issue.
    There's one thing you can do (this one is two-fold, actually), and one you can't:
    1) Starting with the good news, you can install a prefpane called Fan Control (free, here: http://www.macupdate.com/app/mac/23137/fan-control), that will let you control base speed and temp threshold for your fans (the ones on your Mac, I mean...); additionally, you can also install a widget called iStat Pro (free, here: http://www.islayer.com/apps/istatpro/), that you can invoke through Dashboard after freezing your game, so that it lets you know the current temperature your Mac is operating under.
    2) Now, for the (semi-) bad news: given your MBP probably has an "i-something" processor, you won't be able to install this Scandinavian gem that's called CoolBook, that lets you undervolt your logic board so as to prevent overheating. CoolBook currently doesn't support i-3 to i-7 processors because they don't rely on the same SMB sensors as the older Intel processors Apple installed in its machines prior to the current generation of MacBooks, MBP, MBA and the like. I said semi-bad news, because undervolting has obvious effects on your machine's response when under strain; if you are using processor- or memory-intensive applications, they might (scratch that, they will) be slowed down by an undervolted logic board. Video games being one.
    HTH

  • Iphone burned via charger. It is working but not charging.

    I connected my iphone to mac for sycronization. In one minute I got a massage on my desktop that one of the USB ports is overheating. I felt a burning smell and disconnected my iphone immidiatly. Niether charger nor iphone itself have been burned but it is not charging anymore. I think a charging part inside the phone was burned. Iphone worked till the battary was exausted. Did anyone had the same problem? Why did it happen? Is it possible to fix the phone?

    I think the sequence is backwards. Something in your phone short-circuited, which caused the overcurrent protection in the Mac USB subsystem to shut down. Your phone broke first, it wasn't the computer that broke the phone. You need to get it repaired or exchanged, hopefully under warranty.

  • IPad 2 will not charge shows nothing in screen

    Havnt used my ipad for about 3 weeks and have come to charge, when I initially plugged it in to charge I just got the screen with the apple Logo and the sign showing connect to power.  When I did nothing happened and now there is nothing on my screen and none of the buttons work.  Anyone have any advise?

    Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good. If your computer/iTunes does not recognize the iPad, then the cable is probably bad.
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Z1 compact does not charge magnetic.Please Help Me.

    Hello.
    My device is not charging magnetic.
    Screen freezes when I inserted the magnetic charging cable.
    I need to make a quick start to open my device.
    How do I charge Please help.
    Thanks...

    It seems to be to more than the Z1C's - https://talk.sonymobile.com/t5/Xperia-Z2/Lollipop-charging-bug/td-p/965384
    I've got this charging problem with my Z1C - it won't charge at all using the genuine Sony dock I have, it wont charge past 90% if using the charger that came with it if it's plugged into the USB port.
    If it's turned on when I try charging it, the screen flashes on an off with the LED and charging symbol also flashing on an off.
    Eventually it comes up with a message saying it's using more power than the charger can supply!
    If it's turned off when charging (still doesn't work via the dock), it gets to 90% again, but then if it's left will start dropping back down again to around 70% overnight - again with the LED flashing.
    If it gets to 90% and is unplugged, left for a few seconds and plugged back in it'll start charging again, by about 1%.
    By repeating this over and over again I've managed to get it to 95%, then got fed up!

  • Iphone 5 slider freeze during charging.

    iphone 5 slider freeze during charging.
    This happened after upgrading to iOS 6.1.
    The "slide to unlock" stuck.
    I could receive phone, sms, and other notification but can not answer nor reply.
    It stuck. This only happened during charging, when I pull the plug, it work normally again.

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • MacBook Pro charger overheating.

    MacBook Pro charger overheating replaced it and new one is overheating also don't know if its the charger causing the the problem.

    Yikes!  I assume you mean that thing some people use to smooth out their clothes?
    Are you still under warranty?  I would take it in to make sure it's not something on the computer side.
    charlie

  • TS1363 Itunes freezes ('not responding') as soon as i connect my ipad. how do i resolve this?

    Itunes freezes ('not responding') as soon as i connect my ipad. how do i resolve this?

    well i did..everything that i could find?
    What i think it is is that the ipod is put into a camera port or format and i need it to go back to the USB port but i dont know how to change the setting for the ports? I have uninstalled it many times and reloaded it and shut/restart.. My ipod doesnt open in the devise management it opens in the portable devices???? i dont know why it is doing this?I reinstalled iTunes and did everything i could find that could fix it.... Please if you can figure this out reply! i dont want to take it in i would be charged 100 or so! please i need help!!!

  • Lenovo Miix 2 10 Plugged in not charging

    My problem appears similar to some others posted but has not been resolved by any solutions suggested. Computer works when plugged in but battery does not charge. Have attemped uninstall of battery management software and reboot but this was unsuccesful. Any help would be appreciated. Batttery may have overheated whilst charging. Any ideas?Thanks 

    It looks like this problem happens with certain electrical outlets. They all seem alike to me, but when I plugged my Miix adapter back into the outet I used to use, it began charginig like normal. Any idea why different electrical outlets would alter the charging behavior of the tablet?

  • I-pod touch not charging

    Had this i-pod touch for one year. Hasn't been misused and now not charging. Apple shows on screen when charging, but freezes-up and doesn't charge.

    I am having this same problem as well. I have the 8gb 2nd generation and for some reason it will only charge on my work pc, which is no longer allowed. I have tried my desktop and 2 laptops at home and still does not charge. I even have the powermat wireless charger and it doesn't work with that either, nor does plugging it into a wall outlet. It has been giving me trouble like this for the last 2 months. It's warranty expired 3 months ago...go figure. It is only a little over a year old and has not been misused either. When I took it to work the last time I even did a factory reset on it and that did not solve the problem either. Any help would be greatly appreciated.

  • IPhone will not charge when plugged into computer

    My phone was not working, and so I took it to the apple store nearby. Here were the problems:
    -error message saying "this device not made to work with iPhone"
    -would not charge when plugged into computer OR wall charger
    -person on other end of phone calls said i sounded really far away and had trouble hearing me
    -when i shut it off, it restarts itself immediately
    -cant do a manual reset holding the power and center buttons at same time
    -when plugged into the computer, mouse freezes, and a message appears saying ""power surge on hub port A usb device has exceeded the power limits of its hub port."
    At the genuis bar they told me they cant help me cause that little water damage indicator inside the headphone hole is pink instead of white! I have never ever ever ever ever EVER gotten my phone directly wet. The only thing i could think of was the humidity in the bathroom when I'm taking a shower, and using the timer to use hair remover on my legs lol. But i think this is totally unfair, they wont repair my phone, or even really look at it because of this supposed water damage. My phone has worked fine up to this point, and the thing that happened that started all of this is when i dropped it about a foot off the ground in a DRY parking lot.
    Is there any way they will replace my iphone at no charge?

    Well don't give up try again maybe your luck will change when you go back up there,let somebody else look at your phone not the same person that told you that.I would get a second and a 3rd option about my phone.When you go back don't even tell them what somebody already told you up there ones.
    And after the 3rd time I'll ask them well can they send your phone off to be fixed,It might not be nothing wrong with your phone it might be just they eyes playing tricks on them.Cause I promise you I know my phone had gotten some water in it cause I was sitting on the porch one day me and about 6 other people one of my cousin came out and through a bucket of water at my brother and I was sitting right on the side of him.And when I say my phone look like I than gave it a bath witch when they did that I had already had call the Apple store and told them something was wrong with my phone.And they had gave me appt to come up there,so I went to the Apple store I wanted say two day's latter after I made the appt to let them see my phone but my cousin and brother was playing with that water the day before I had to go so I guess that's why I was mad cause I was going to get other phone the next day after apple look at my old phone.So even with all that they still gave me other phone and I don't see how I didn't have no water in my phone cause of how much water they had through on my phone.
    I guess I was luck cause if they would have told me that I would have freaked out so badly.And the reason why cause I wouldn't had my phone for five days and for them to tell me they couldn't do something oh yea they would have done something cause I would have went to jail that day for tearing up something in the store that worth my 400 and something dollars I spent on my phone and it would have bent one of them computer that would have bent history.
    But I'M telling you,you going to be okay don't give up.Make you other appt and see what they say.

  • IPHONE 5 will not charge!

    Hey guys,
    This is my third iPhone 5 since late September when I got it on release day.,
    My first one was overheating
    My second was a faulty lock button
    And now my third, it will not charge and sometimes will not turn on.. Like technically it would still be 'on' but when I press the lock or home button it will stay black.. Even when I flick the cribbage switch it will not do anything.. So I wait 2/3 minuets and it pops back to life..
    The charging thing is a recent one.. It just sits on the percent that it was on and then slowly decreases. To 0%. I am seriously doubting iphone 5.. I'd honestly just go back to my old 4 if there is going to be that many problems with these ones..
    Quite upset that my phone won't charge.. I run everything off it..
    Please help!!

    Apple replaced it for me again..

  • Zen Sleek not charging properly and battery not holding cha

    Hi everyone. My Sleek has the latest firmware and is about 4 months old. I've searched for any info regarding my specific problem but can't find any. The problem is that the player won't charge. I plug in the charger and the charging sign shows. This quickly - in less than a minute I think - changes to the plug sign, suggesting?that the player is fully charged. I turn off the charger and the battery strength goes down to 0 or bar immediately and if I try playing it, it very quickly gives up and either switches itself off or, more often, freezes. When I plug the charger back in, the player usually has to rebuild the library before I can play anything. I've tried leaving the player switched on with idle shutdown turned off. When I do this, the fully charged sign disappears after a bit and the battery looks like it's charging for a short period of time before the charged sign comes back, but the result is the same. I've even tried doing?this overnight but with no joy. As I type, I'm trying to charge the player via a USB port. It looks like it's charging for about 30 secs, then the charged sign comes up, then it goes away and I'm left with 2 bars. Unplugging the player leaves me with no bars again. Also, the number of bars has in the past seemed to change randomly - 0 bars, then 2 bars, then bar etc. And it's gone from 2 bars to 'Low battery' and switching itself off without any inbetween stage. I've done a disk clean quite a few times with no joy. I had the same problem a few months ago and I tried all the above things and then it just seemed to randomly sort itself. So I stuck. Any suggestions would be gratefully received!?Thanks, Martin.

    Did you try just leaving the player plugged in the to charger regardless of what the charging sign indicated?The problem you describe is a quite common characteristic of lithium batteries when they have done a few hundred charging cycles and are left to run very low or empty on charge. There is some quite convincing evidence that unlike using ni-cad or ni-mh batteries, we should not fully empty lithium batteries and that regular top-up charges are better for them. The player's charging circuit basically cycles between charging and testing the battery's output voltage. So after the 30 seconds to minute you describe the player stops accepting charge and tests the voltage from the battery. When lithium batteries have been charged for a short time from empty, the voltage they show to the test is almost what the charging voltage was, so it stops charging believing the battery to be full. Some charging circuits give up then, especially those that can't trickle charge (applying a small current to keep the battery topped up but not charging) to protect the battery. So basically you did the right thing to revi've the battery, but maybe for the next few cycles, just leave it til it gets to 30-50% before recharging. Hope that helps in some way

  • New battery will not charge - have we missed something obvious?

    My DD has just replaced the battery on her PB. When the power supply (less than 3 months old) is attached, the led shows amber but the battery will not charge. I've tried reseating the battery with no effect. Since I purchased it from an apple dealer, I'll be taking it back tomorrow, but I wondered whether there is something obvious we've missed.
    Thanks
    Jennifer

    Thank you both. Yes I know the battery needs to be calibrated, but as you say, to calibrate, you need to charge, which is a non-starter. I'm going to take the whole thing in (again). I suspect the problem that led to the battery needing to be replaced possibly dealt a death blow to something inside. I don't know whether this is relevant, but before replacing the battery, the charger started to make a loud buzzing noise (I understand - I wasn't here), and with the old battery in place the PB kept freezing and/or rebooting. Only with the battery out and just the power supply in would the PB work. The PB is seeing the new battery, it just wont charge it. I just wanted to make sure there wasn't anything else I could do before taking it in.
    Jennifer

  • MBP not charging

    My MBP power cord has suddenly started showing an amber light and stating "not charging" on the screen. When I plug n he adapter the light is green fr a second then goes amber.
    I take out my battery and the power cord keeps the machine going fine with a green light on.
    Problem with the battery? Any fixes? Of is it another new battery?

    I'm on an MBP 17" and the same problem just occurred on mine. The problem fixed itself while I was surfing for an answer, and it appears circumstantially that in my case the MBP was too COLD. I had taken it out of its backpack to charge after bringing it in from the trunk in sub-freezing temperatures. It had not climatized sufficiently, I guess. But surfing gently brought the temperature up to where the power manager kicked in.
    Hope that helps somebody.

Maybe you are looking for

  • Mail: How to check an account ONLY from specific Network Location?

    I use multiple macs, and use my .mac account to synchronize mail accounts, rules, smart mailboxes, signatures, etc. However, I'd actually like to specifically NOT check certain accounts on some machines. Even though the account settings are synced, I

  • WebI report in rtf/doc format using BO XI R3

    Hi,    Is it possible to generate webi/deski reports in rtf/word doc using Report Engine SDK(Java). I am able to generate pdf and xls using OutputFormatType.PDF and  OutputFormatType.XLS like below. binaryView = (BinaryView)documentInstance.getView(O

  • How to use the integrated ITS server in WAS6.40 for WEBGUI

    Hi, I am testing the Portal 6.0SP6 on WAS6.40SP7. Using User Mapping, I am able to connect and call some transaction to R/3 System (4.6c) and the ITS servers for the R/3 system.  If I am going to use webgui to call a transaction, do I need the ITS se

  • Transporting Objects to QA to Prod

    hi, Its a IDOC to XI to HTTP Receiver. There are 10 different HTTP Receivers configured using SM59 with external type 'G'with the corresponding certificates installed using STRUST. Now i think these cannot be transported and i have to install the new

  • WHY NOT UNSIGNED INT

    Hi In java int or float or double type are signed type Why not unsigned